minimal101
Newbie
- Registriert
- 21. August 2019
- Beiträge
- 1
- Reaktionspunkte
- 6
- Punkte
- 23
Hello. Excuse me ,but i cant write in german language.So here it is.!
I dont have Raspberry and decide to run on Emu on my local linux system.
Here is fully working debian buster raspberry + gbox + oscam + reader on ttyUSB0 !
Preparation
1.Download kernel,bootpart and image file | reconfigured with all |.
2.Install Qemu
If you running GUI linux install from command line
For server users recommend to install latest Qemu
3.USB reader link to qemu
4.Extract previously downloaded file to you Linux.
Lets say we use RASP3 folder in our system
example
5.Run
We previously check usb reader parameters and we need these 2 values in red to pass in vm.
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6001 FT232 USB-Serial (UART) IC
fill these in final command line below .
-usb -device usb-host,vendorid=0x0403,productid=0x6001
in /RASP3 folder run command
6.Done
We now have running Raspberry in qemu vm !
Ports open in vm
ssh = 5022
oscam web = 16002
newcamd oscam = 22000
If you need to open other ports to vm just add them with hostfwd=tcp in previous command.
All config files are taken 1:1 from this post
So you have to thanks to Osprey and all other involved to this project .
Regs !
I dont have Raspberry and decide to run on Emu on my local linux system.
Here is fully working debian buster raspberry + gbox + oscam + reader on ttyUSB0 !
Preparation
1.Download kernel,bootpart and image file | reconfigured with all |.
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
2.Install Qemu
If you running GUI linux install from command line
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
For server users recommend to install latest Qemu
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
3.USB reader link to qemu
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
4.Extract previously downloaded file to you Linux.
Lets say we use RASP3 folder in our system
example
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
5.Run
We previously check usb reader parameters and we need these 2 values in red to pass in vm.
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6001 FT232 USB-Serial (UART) IC
fill these in final command line below .
-usb -device usb-host,vendorid=0x0403,productid=0x6001
in /RASP3 folder run command
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
6.Done
We now have running Raspberry in qemu vm !
Ports open in vm
ssh = 5022
oscam web = 16002
newcamd oscam = 22000
If you need to open other ports to vm just add them with hostfwd=tcp in previous command.
All config files are taken 1:1 from this post
Ubuntu 18.04 64Bit Server Image für Raspberry Pi 3; 3+
Image kann auf micro SD Karte ab 16GB geschrieben werden. Zum schreiben des Image in Windows Win32DiskImager nutzen Enthalten im Image: - IPC (THX @Alex) - oscam 11539 /var/etc/ - osemu - gbox /var/keys/ - FTP - Samba - Webmin https://ubuntu_pi:10000 Passwörter: Edit: damit das Netzwerk...
www.digital-eliteboard.com
So you have to thanks to Osprey and all other involved to this project .
Regs !
