##########################################################
# #
# All lines preceded by "#" are comment lines so #
# use this model for all your readers ( up to 32 ). #
# A C: line is a CCcam reader , a N: line is NewCamd #
# reader , the internal card readers are also shown. #
# A card reader must always to specify the CAID. #
# #
##########################################################
#
# this is an example of how to connect a CCcam server
# this line acts as a cccam 2.0.11 client (recomended)
#
[reader]
label = CCcam_server
protocol = cccam
device = meine ip
account = userxxx,passxxx
group = 1,2
# das ist falsch. Jeder reader bekommt nur eine Nummer: group = 2
# fallback=1
cccmaxhop = 3
caid = 1702,1833,1843
cccversion = 2.0.11
# cccbuild = 2892
#
[reader]
Enable = 1
Label = orf-camd3
Protocol = camd35
Device = 127.0.0.1,30001
Account = test,pass
CAID = 0D05
Group = 1
#
# this is an example how to connect to a NewCamd server
#
# [reader]
# label = newcamd_server
# protocol = newcamd
# key = 0102030405060708091011121314
# device = myserver.dyndns.tv,66666
# account = login1,password1
# group = 2
#
this is an example how to "read" a na*ra card internal(e.g.
HD+/HD01)
#
[reader]
Label =
HD plus
Protocol = internal
Device = /dev/sci0
detect = CD
EMMCache = 1,1,2
group = 3
CAID = 1830,09C4
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# hier sind Leerstellen drin-rausnehmen
boxkey = A7642F57BC96D37C
#
# this is an example how to "read" a na*ra card internal(e.g.
HD+/HD02)
#########use following entry in oscam.services(required)#######
####[
hdplus]
####caid=1843
####srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274
#########
#
# [reader]
# Label =
HD plus
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# group = 4
# CAID = 1843
# ident = 1843:003411,000000,008011 #not required#
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
# cardmhz = 368
# mhz = 368
#
# this is an example how to "read" a nagra card internal(Sky)
#
# [reader]
# Label = Sky-Test
# Protocol = internal
# Device = /dev/sci0
# detect = CD
# mhz = 600
# cardmhz = 600
# EMMCache = 1,1,2
# group = 5
# CAID = 1702
#
# this is an example how to "read" a Viaccess card internal(SRG)
#
# [reader]
# Label = SRG
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# services = SRG
# group = 6
# CAID = 0500
# mhz = 368
#
# this is an example how to "read" a Funcard with ORF + AS-file internal
# [reader]
# Label = ORF
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# group = 7
# CAID = 0D05
#
# this is an example how to "read" a BDC internal(C+NL)
#
# [reader]
# label = C+NL
# enable = 1
# protocol = internal
# device = /dev/sci0
# caid = 0622
# force_irdeto = 1
# detect = cd
# mhz = 600
# cardmhz = 600
# group = 8
# emmcache = 1,3,2
# lb_weight = 100
# boxkey = 0000000000000000
#
#######################################################################
## smargo support ##
# External reader (smargo) requires oscam LIBUSB #
# get reader serial of smargo by telnet cat /proc/bus/usb/devices #
# smargo firmware 1.04 or higher required for getting serial #
# #
#######################################################################
#
# this is an example how to "read" ICE in smargo(IR2 caid 0648)##input reader serial###
#
# [reader]
# Label = ICE
# protocol =
smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 9
# force_irdeto = 1
# deprecated = 1
# CAID = 0648
# rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
# boxkey = 1122334455667788
# boxid = 12345678
# cardmhz = 600
# mhz = 600
#
# this is an example how to "read" ICE in smargo(CW caid 0D95)##input reader serial###
#
# [reader]
# Label = ICE
# protocol =
smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 10
# CAID = 0D95
# mhz = 257
# cardmhz = 257
#
# this is an example how to "read" a na*ra card in smargo(e.g.
HD+/HD01)##input reader serial###
#
# [reader]
# Label =
HD plus
# protocol =
smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 11
# CAID = 1830
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
#
# this is an example how to "read" a nds card in smargo(sky V13)##input reader serial at XXXXX###
#
# [reader]
# label = sky_v13
# protocol =
smartreader
# device = Serial:Reader XXXXX
# caid = 09C4
# boxid = 12345678
# detect = cd
# mhz = 368
# cardmhz = 368
# ident = 09C4:000000
# group = 12
# emmcache = 1,3,2
# blockemm-g = 1
#
#######################################################################
