Probleme mit V13 oscam mit DM500HD

[pole23]

Hallo,

leider bekomme ich meine V13 karte mit der OSCAM 1.20 nicht zum laufen. Ich erhalte folgendes im Log:

Spoiler

>> OSCam << cardserver started at Wed Jan 28 13:44:04 2015-------------------------------------------------------------------------------
2015/01/28 13:44:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-unknown-linux-gnu)
2015/01/28 13:44:04 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 32538
2015/01/28 13:44:04 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2015/01/28 13:44:04 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/01/28 13:44:04 0 s signal handling initialized
2015/01/28 13:44:04 0 s V13 [internal] creating thread for device /dev/sci0
2015/01/28 13:44:04 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/28 13:44:04 0 s waiting for local card init
2015/01/28 13:44:04 2AE007C8 r V13 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2015/01/28 13:44:04 2AE007C8 r V13 [internal] card detected
2015/01/28 13:44:04 53D018 h webif: decompressed 69662 bytes back into 195704 bytes
2015/01/28 13:44:04 53D018 h HTTP Server running. ip=0.0.0.0 port=2002
2015/01/28 13:44:05 2AE007C8 r V13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2015/01/28 13:44:05 2AE007C8 r V13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/01/28 13:44:05 2AE007C8 r V13 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/01/28 13:44:05 2AE007C8 r V13 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/01/28 13:44:08 2AE007C8 r V13 [internal] card system not supported
2015/01/28 13:44:08 2AE007C8 r V13 [internal] Normal mode failed, reverting to Deprecated Mode
2015/01/28 13:44:09 2AE007C8 r V13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2015/01/28 13:44:09 2AE007C8 r V13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/01/28 13:44:09 2AE007C8 r V13 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/01/28 13:44:09 2AE007C8 r V13 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/01/28 13:44:12 2AE007C8 r V13 [internal] card system not supported
2015/01/28 13:44:12 2AE007C8 r V13 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/28 13:44:12 2AE007C8 r V13 [internal] card initializing error
2015/01/28 13:44:12 0 s init for all local cards done
2015/01/28 13:44:12 0 s anti cascading disabled
2015/01/28 13:44:12 2AE02608 c plain dvbapi-client granted (DVBApi, au=auto (1 reader))
2015/01/28 13:44:12 2AE02608 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 9

Ich bekomme das Problem "card system not supported" nicht weg. Hier meine Configs:

oscam.conf

Spoiler

[global]nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
lb_autobetatunnel = 0
logfile = /tmp/oscam.log;stdout
maxlogsize = 256


[webif]
HttpPort = 2002
HttpUser = admin
HttpPWD = oscam
httptpl = /var/tuxbox/config/
httpcss = /var/tuxbox/config/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 192.168.178.1-192.168.255.255
HttpReadOnly = 1


[dvbapi]
Enabled = 1
Boxtype = coolstream
User = DVBApi
decodeforever = 1
AU = 2

oscam.server

Spoiler

[reader]Label = V13
Protocol = internal
device = /dev/sci0
ins7e11 = 15
cardmhz = 357
Detect = CD
Group = 1
boxid = 12345678
cool_timeout_after_init = 50
cool_timeout_init = 150
CAID = 09C4
EMMCache = 1,1,2

oscam.user

Spoiler

[account]User = DVBApi
AU = 1
Group = 1

oscam.dvbapi

Spoiler

P: 09C4I: 0

Woran könnte das Problem liegen???

 

[razorback]

AW: Probleme mit V13 oscam mit DM500HD

nachdem es ein interner Reader ist:
schau Dir erstmal die Settings für cardmhz etc. an, da hat sich grad für die DM allerhand getan.

und zweitens könnte ins7e11=15 zu hoch sein - probiers mal mit 13

 

[pehedima]

1. deine oscam ist zu alt. Bitte updaten.
2. boxtype = dreambox einstellen.
3. Au = 1 setzen
4. das blocken aller EMMs in den Reader einfügen, inkl. saveemm-u = 1
5. cardmhz = 2700 setzen
6. lb_mode = 0 setzen
7. httpreadonly = 0 setzen
8. alle cool_* Parameter löschen
9. decodeforever löschen

Gesendet von meiner Handquetsche

 

[pole23]

AW: Probleme mit V13 oscam mit DM500HD

Hallo,

vielen dank für die schnelle Antwort. Ich werde es heute abend testen.
Was genau ist mit "das blocken aller EMMs in den Reader einfügen" gemeint? Wie genau wird das in die Config eingetragen?

 

[dodo83]

AW: Probleme mit V13 oscam mit DM500HD

guck doch im WebIF nach unter READERS -> Bearbeiten

dann müsste in der Config das auftauchen

blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1

alle EMM blocken
Unique speichern