Problem "alten" Oscam und neu aufgestetzdem Image

Pilot · 12. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

bei mir sieht das so aus bei files logfile: Switch Debug from

Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.

logfile
Switch Debug from 0 to

Sie müssen registriert sein, um Links zu sehen.

barilla18 · 12. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

also wenn ich auf files --> logfile --> Switch Debug from 6 to

Sie müssen registriert sein, um Links zu sehen.

2 und 4 anklicken
dann bekomme ich diesen Log:

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Feb 12 23:50:09 2015
-------------------------------------------------------------------------------
2015/02/12 23:50:09 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:09 0 >> OSCam << cardserver log switched, version 1.20-modern_svn, build r1256 (mipsel-unknown-linux-gnu)
2015/02/12 23:50:09 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:09 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:09 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:09 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:10 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:10 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:10 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:10 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:10 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:11 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:11 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:11 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:11 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:11 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:12 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:12 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:12 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:12 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:12 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:13 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:13 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:13 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:13 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:13 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:14 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:14 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:14 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:14 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:14 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:15 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:15 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:15 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:15 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:15 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:16 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:16 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:16 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:16 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:16 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:17 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:17 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:17 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:17 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:17 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:18 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:18 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:18 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:18 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:18 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:19 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:19 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:19 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:19 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:19 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:20 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:20 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:20 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:20 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:20 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:21 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:21 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:21 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:21 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:21 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:22 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:22 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:22 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:22 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:22 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:23 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:23 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:23 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:23 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:23 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:24 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:24 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:24 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:24 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:24 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:25 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:25 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:25 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/12 23:50:25 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:25 5913E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/12 23:50:26 5913E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/12 23:50:26 77100468 h Stopping log...

Pilot · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

Versuch mal mit debug 4.
Also ohne 2

barilla18 · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

Log nur mit 4

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Fri Feb 13 00:25:59 2015
-------------------------------------------------------------------------------
2015/02/13 00:25:59 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:25:59 0 >> OSCam << cardserver log switched, version 1.20-modern_svn, build r1256 (mipsel-unknown-linux-gnu)
2015/02/13 00:25:59 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:25:59 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:25:59 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:25:59 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:25:59 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:00 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:00 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:00 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:00 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:01 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:01 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:01 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:01 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:01 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:01 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:02 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:02 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:02 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:02 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:03 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:03 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:03 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:03 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:03 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:03 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:03 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:04 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:04 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:04 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:04 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:04 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:05 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:05 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:05 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:05 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:06 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:06 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:06 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:06 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:06 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:06 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:07 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 00:26:07 52D818 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:07 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 00:26:07 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/02/13 00:26:07 77100468 h Stopping log...

Pilot · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

ich versuch mal, ob dir jemand anderes weiterhelfen kann.

supraracer · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

Zum Auslesen des Payload musst du auf einem Sky Kanal sein der in deinem Abo ist, z.B. Sky Krimi, dann im Debug Level 6 den Reader neu starten - hast du es genau so gemacht?
Poste jetzt noch mal ALLE aktuellen OScam Config Files von deiner Box.

-supraracer

barilla18 · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

so hab jetzt unter FILES --> logfile --> Debug 6 ausgewählt --> Start Log --> dann unter READERS den SKY Reader gestoppt und wieder gestartet --> dann später Stop Log:

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Fri Feb 13 11:07:51 2015
-------------------------------------------------------------------------------
2015/02/13 11:07:51 58D0A0 24 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/13 11:07:51 58D0A0 00 00 00 00 00 00 00 00 90 00
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] write to cardreader
2015/02/13 11:07:51 58D0A0 D0 76 F3 00 18
2015/02/13 11:07:51 0 >> OSCam << cardserver log switched, version 1.20-modern_svn, build r1256 (mipsel-unknown-linux-gnu)
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] Answer from cardreader:
2015/02/13 11:07:51 58D0A0 24 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/13 11:07:51 58D0A0 00 00 00 00 00 00 00 00 90 00
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] write to cardreader
2015/02/13 11:07:51 58D0A0 D0 76 F4 00 18
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] Answer from cardreader:
2015/02/13 11:07:51 58D0A0 24 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/13 11:07:51 58D0A0 00 00 00 00 00 00 00 00 90 00
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] write to cardreader
2015/02/13 11:07:51 58D0A0 D0 76 F5 00 18
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] Answer from cardreader:
2015/02/13 11:07:51 58D0A0 24 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/13 11:07:51 58D0A0 00 00 00 00 00 00 00 00 90 00
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] write to cardreader
2015/02/13 11:07:51 58D0A0 D0 76 F6 00 18
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] Answer from cardreader:
2015/02/13 11:07:51 58D0A0 24 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/13 11:07:51 58D0A0 00 00 00 00 00 00 00 00 90 00
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] write to cardreader
2015/02/13 11:07:51 58D0A0 D0 76 F7 00 18
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] Answer from cardreader:
2015/02/13 11:07:51 58D0A0 24 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/13 11:07:51 58D0A0 00 00 00 00 00 00 00 00 90 00
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] write to cardreader
2015/02/13 11:07:51 58D0A0 D0 76 F8 00 18
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] Answer from cardreader:
2015/02/13 11:07:51 58D0A0 24 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/13 11:07:51 58D0A0 00 00 00 00 00 00 00 00 90 00
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] write to cardreader
2015/02/13 11:07:51 58D0A0 D0 76 F9 00 18
2015/02/13 11:07:51 58D0A0 r Sky [videoguard2] Answer from cardreader:
2015/02/13 11:07:51 58D0A0 24 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/13 11:07:51 58D0A0 00 00 00 00 00 00 00 00 90 00
2015/02/13 11:07:52 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/13 11:07:52 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 11:07:52 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/13 11:07:52 58D0A0 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 11:07:52 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 11:07:52 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 11:07:53 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/13 11:07:53 58D0A0 r Sky [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 11:07:53 5722F8 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/13 11:07:53 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 11:07:54 57D8A8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/13 11:07:54 57D8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/13 11:07:54 76900468 h Stopping log...

- - - - - - - - - -

hier nochmal die Configs aus dem WI

oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10069
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 7000
bindwait = 5
nice = 0
preferlocalcards = 1
usrfile = /tmp/oscamuserfile

[cache]

[cccam]
port = 12000
nodeid = 4E8D924810A3149C
version = 2.3.0
reshare = 3
forward_origin_card = 1

[dvbapi]
enabled = 1
au = 1
user = ET9000
boxtype = dreambox

[webif]
httpport = 12345
httphelplang = de
httprefresh = 5
httppollrefresh = 5
httpshowuserinfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-192.168.255.255
hideclient_to = 0
http_status_log = 1

oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-modern_svn SVN r1256
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = Sky
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
nagra_read = 1
mhz = 500
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
ndsversion = 2

[reader]
label = EMU
protocol = cs357x
device = 127.0.0.1,22000
user = emu
password = emu
caid = 0D00&0F00,090F,0500,1801
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000
group = 2
auprovid = 030B00

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,0D03,0D05,090F,0500,1801,0604,2600,FFFF
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000;2600:000000;FFFF:000000
group = 1
emmcache = 1,1,2
auprovid = 030B00

oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10069
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = ET9000
group = 1,2

[account]
user = xx
pwd = xx
keepalive = 1
group = 1,2

[account]
user = xxx
pwd = xxx
keepalive = 1
group = 1,2

4gx35 · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

wie ist denn der aktuelle stand ?
hattest du schon emm geloggt und karte manuell aktiviert und verlängert
oder hast du biher nur keine emm bekommen, um das zu machen ?

barilla18 · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

nein das hatte ich noch nicht gemacht. Hab da auch erst angefangen in der Anleitung mich rein zu lesen.
bis Dienstag Morgen ging noch alles dann musste ich den Receiver neustarten und ist dann im booten hängen geblieben, darauf musste ich das Image neu aufspielen.
Die Configs hatte ich zuvor gesichert.
Seit dem ist Sky dunkel und emu(ORF) funktioniert auch nicht mehr

- - - - - - - - - -

mein Abo sollte noch bis Dez.2015 laufen

4gx35 · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

du weisst aber schon, dass du keine unique emm speicherst und dein user et9000 kein au macht ?
aber vorher war deine karte schon hell ?

würde erst noch einmal andere oscam version nehmen, immer erst mal eine ohne emu und ohne modern webif, da gibt es evtl. mehr auswahl,
dann oscam neu starten und log aus dem webif unter files-logfile vom start an posten, debug level auf 0 lassen

barilla18 · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

Ja vorher war die Karte hell.

4gx35 · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

wie hast du das denn gemacht, wenn du keine emm geloggt hast ?

Pilot · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

Hallo 4gx35,

darum geht es ja.
Deshalb wollte ich seinen playload sehen, ob die Karte noch gut ist.

Bisher war dazu kein richtiger Log zu sehen.

Mlg Pilot

4gx35 · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

@barilla: also mal im oscam webif auf der statusseite ganz unten steht switch debug from
dort die 2 und danach die 4 anklicken (macht also level 6)
oscam neu starten, post aus files-logfile vom oscam start
log beginnt mit cardserver started ...
sender auf sky krimi, wurde dir bereits oben schon gesagt

barilla18 · 13. Februar 2015

AW: Problem "alten" Oscam und neu aufgestetzdem Image

hab nun oscam-svn10502-mipsoe20-webif drauf
Log mit Debug 0

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Fri Feb 13 12:07:13 2015
-------------------------------------------------------------------------------
2015/02/13 12:07:13 77200468 h (-) -- Skipped 7 duplicated log lines --
2015/02/13 12:07:13 77200468 h >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10502 (mipsel-unknown-linux-gnu)
2015/02/13 12:07:15 526778 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/02/13 12:07:19 525E68 r (reader) Sky [videoguard2] Deactivating card
2015/02/13 12:07:19 526778 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/02/13 12:07:23 77200468 h (-) -- Skipped 1 duplicated log lines --
2015/02/13 12:07:23 77200468 h (reader) Sky [videoguard2] Restarting reader
2015/02/13 12:07:23 77200468 h (reader) Sky [videoguard2] creating thread for device /dev/sci1
2015/02/13 12:07:23 76E0E698 r (reader) Sky [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/02/13 12:07:23 76E0E698 r (reader) Sky [videoguard2] Reader sci internal, detected box type: vuultimo
2015/02/13 12:07:24 76E0E698 r (reader) Sky [videoguard2] card detected
2015/02/13 12:07:24 76E0E698 r (reader) Sky [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/02/13 12:07:24 76E0E698 r (reader) Sky [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/13 12:07:24 76E0E698 r (reader) Sky [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/02/13 12:07:25 76E0E698 r (reader) Sky [internal] Buffers readed 0 bytes total time_us 992814
2015/02/13 12:07:25 76E0E698 r (reader) Sky [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/13 12:07:26 76E0E698 r (reader) Sky [internal] Card type: P1TV
2015/02/13 12:07:26 76E0E698 r (reader) Sky [internal] Rom version: 20AA
2015/02/13 12:07:26 76E0E698 r (reader) Sky [internal] Credit available on card: 0 euro
2015/02/13 12:07:27 76E0E698 r (reader) Sky [internal] Extended 4C detected
2015/02/13 12:07:27 76E0E698 r (reader) Sky [internal] FuseByte: 25
2015/02/13 12:07:27 76E0E698 r (reader) Sky [internal] Region Code: 00BO0102
2015/02/13 12:07:27 76E0E698 r (reader) Sky [internal] Country Code: DEU
2015/02/13 12:07:27 76E0E698 r (reader) Sky [internal] Pincode read: 5840
2015/02/13 12:07:27 76E0E698 r (reader) Sky [internal] PCB settings: FF FF FF FF
2015/02/13 12:07:27 76E0E698 r (reader) Sky [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/02/13 12:07:27 76E0E698 r (reader) Sky [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/02/13 12:07:27 76E0E698 r (reader) Sky [internal] ready for requests
2015/02/13 12:07:27 76E0E698 r (reader) Sky [internal] found card system videoguard2
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] card detected
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] ------------------------------------------------------------------
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] +---------+----------+---------------------+---------------------+
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 0046 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 0068 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 0069 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 006a --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 006b --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 0065 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 0066 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 0067 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 006f --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 007b --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 007d --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 0081 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 008e --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c0 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c8 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c9 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 00ca --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c7 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 00e4 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 00e5 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 00fa --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 00f3 --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] |-- 00 ---|-- 00ff --| 2015/03/14-00:00:00 |
2015/02/13 12:07:27 76E0E698 r (reader) Sky [videoguard2] ------------------------------------------------------from-ins70--
2015/02/13 12:07:28 526778 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/02/13 12:07:45 77200468 h (-) -- Skipped 4 duplicated log lines --
2015/02/13 12:07:45 77200468 h Stopping log...

Suche

Suche

Problem "alten" Oscam und neu aufgestetzdem Image

Pilot

barilla18

Ist gelegentlich hier

Pilot

barilla18

Ist gelegentlich hier

Pilot

supraracer

DEB Inventar

barilla18

Ist gelegentlich hier

4gx35

barilla18

Ist gelegentlich hier

4gx35

barilla18

Ist gelegentlich hier

4gx35

Pilot

4gx35

barilla18

Ist gelegentlich hier

Ähnliche Themen

Spenden Unterstützung