Pogo hängt: Pogo startet ohne Stick nicht mehr.

[nuggelbeb]

Hallo, kann mir jemad helfen?

Pogo startet ohne Stick nicht mehr.
Mit einem USB/TTL Adapter sehe ich :

Spoiler

▒▒▒

U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700)
Pogo E02

SoC: Kirkwood 88F6281_A0
DRAM: 256 MiB
WARNING: Caches not enabled
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
Using egiga0 device
ping failed; host 192.168.178.101 is not alive
Using egiga0 device
ping failed; host 192.168.178.101 is not alive
Using egiga0 device
ping failed; host 192.168.178.101 is not alive
Using egiga0 device
ping failed; host 192.168.178.101 is not alive
Using egiga0 device
ping failed; host 192.168.178.101 is not alive
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Unknown command 'ide' - try 'help'
Unknown command 'mmc' - try 'help'
## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0
loading envs from usb 0 ...
** Bad device usb 0 **
Unknown command 'ide' - try 'help'
Unknown command 'mmc' - try 'help'
running scan_disk ...
Scan device usb
device usb 0:1
** Bad device usb 0 **
device usb 1:1
** Bad device usb 1 **
device usb 2:1
** Bad device usb 2 **
device usb 3:1
** Bad device usb 3 **
Scan device ide
Unknown command 'ide' - try 'help'
device ide 0:1
** Bad device ide 0 **
device ide 1:1
** Bad device ide 1 **
device ide 2:1
** Bad device ide 2 **
device ide 3:1
** Bad device ide 3 **
Scan device mmc
Unknown command 'mmc' - try 'help'
device mmc 0:1
** Bad device mmc 0 **
device mmc 1:1
** Bad device mmc 1 **
device mmc 2:1
** Bad device mmc 2 **
device mmc 3:1
** Bad device mmc 3 **
loading uImage ...
** Bad device usb 0 **

trying openwrtboot from internal flash

ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=1", size 127 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 1016, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1746671877
ubi0: available PEBs: 0, total reserved PEBs: 1016, PEBs reserved for bad PEB handling: 20
Loading file '/boot/uImage' to addr 0x02000000...
** File not found /boot/uImage **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
resetting ...

 

[Osprey]

Und mit Stick startet normal?

 

[nuggelbeb]

ja

 

[Osprey]

Hast du LEDE auf dem Flash? HowTo - Installation von Lede auf Pogoplug E02

 

[nuggelbeb]

nein ? der ist von eBay und ich versuche gerade das er zum laufen kommt.

 

[Osprey]

Wenn der mit debian Stick startet dann mach das LEDE drauf wie im tut von Joerg und alles wird gut. Ist das auch ein e02?

 

[nuggelbeb]

ja ist auch ein e02

 

[Osprey]

Dann probiere es

 

[nuggelbeb]

Oh super. Das sieht doch gut aus oder?

Spoiler

U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700)
Pogo E02

SoC: Kirkwood 88F6281_A0
DRAM: 256 MiB
WARNING: Caches not enabled
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
Using egiga0 device
ping failed; host 192.168.178.101 is not alive
Using egiga0 device
ping failed; host 192.168.178.101 is not alive
Using egiga0 device
ping failed; host 192.168.178.101 is not alive
Using egiga0 device
ping failed; host 192.168.178.101 is not alive
Using egiga0 device
ping failed; host 192.168.178.101 is not alive
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Unknown command 'ide' - try 'help'
Unknown command 'mmc' - try 'help'
## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0
loading envs from usb 0 ...
** Bad device usb 0 **
Unknown command 'ide' - try 'help'
Unknown command 'mmc' - try 'help'
running scan_disk ...
Scan device usb
device usb 0:1
** Bad device usb 0 **
device usb 1:1
** Bad device usb 1 **
device usb 2:1
** Bad device usb 2 **
device usb 3:1
** Bad device usb 3 **
Scan device ide
Unknown command 'ide' - try 'help'
device ide 0:1
** Bad device ide 0 **
device ide 1:1
** Bad device ide 1 **
device ide 2:1
** Bad device ide 2 **
device ide 3:1
** Bad device ide 3 **
Scan device mmc
Unknown command 'mmc' - try 'help'
device mmc 0:1
** Bad device mmc 0 **
device mmc 1:1
** Bad device mmc 1 **
device mmc 2:1
** Bad device mmc 2 **
device mmc 3:1
** Bad device mmc 3 **
loading uImage ...
** Bad device usb 0 **
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=1", size 127 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 1016, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 0
ubi0: available PEBs: 992, total reserved PEBs: 24, PEBs reserved for bad PEB handling: 20
Read 0 bytes from volume kernel to 800000
Volume kernel not found!
Wrong Image Format for bootm command
ERROR: can't get kernel image!
PogoE02>

Aber

Spoiler

Volume kernel not found!
Wrong Image Format for bootm command
ERROR: can't get kernel image!

ist das richtig so?

 

[Osprey]

Mach mal bitte hier: HowTo - Installation von Lede auf Pogoplug E02 weiter.