Plötzlich kein aktuelles EMM Log mehr

[dolce82]

Hallo zusammen,

habe diesmal vergessen rechtzeitig EMM manuell zu schreiben, somit no entitlements...

Bin ins EMM Log File rein und musste leider feststellen, dass seit 01.05.2015 am Log nichts mehr geändert wurde... keine neuen Einträge.
Sieht irgendwie danach aus, als hätte ich versehentlich was abgeschalten, leider komme ich aber nicht drauf was es sein könnte.

Anbei mal meine Einstellungen.

Karte ist nicht gepaired, habe ich schon geprüft.

oscam.conf

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-modern SVN r1116
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /dev/tty
nice = -1
waitforcards = 1
preferlocalcards = 1

[newcamd]
port = 15040@098C:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 15000
nodeid = 34E18CA0104314C8
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
user = ich
boxtype = dreambox

[monitor]
port = 988
aulow = 120
monlevel = 4
hideclient_to = 0

[webif]
httpport = 15001
httprefresh = 7
httpallowed = 192.168.0.0-192.168.255.255,127.0.0.1
aulow = 120
hideclient_to = 0

oscam.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-modern SVN r1116
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = V14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
#blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
ndsversion = 2

[reader]
label = Emulator
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00

oscam.user

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-modern SVN r1116
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = a
pwd = b
au = 1
group = 1


[account]
user = aa
pwd = bb
au = 1
group = 1


[account]
user = aaa
pwd = bbb
au = 1
group = 1

ECM kommen wie verrückt rein...

Vielen Dank für eure Hilfe!

 

[salidos]

AW: Plötzlich kein aktuelles EMM Log mehr

Deine Karte wird wahrscheinlich gepairt sein, da du blockemm-u = 1 nicht gesetzt hast.
Mach das blockemm-u =1 rein und blockemm-bylen raus!

Post emal dein Payload. Vielleicht bist du ja doch ein Glückspilz.

Und der user = ich fehlt.

 

[dolce82]

AW: Plötzlich kein aktuelles EMM Log mehr

Payload 0F 06 00 10 20

hatte vorher gerade erst blockemm-u = 1 raus genommen gehabt, weil ich dachte vielleicht kommen deshalb keine emm durch, ist wieder gesetzt und blockemm-bylen hab ich rausgenommen mit #

 

[salidos]

AW: Plötzlich kein aktuelles EMM Log mehr

Dann leg einen user mit "ich" an. Und da au = V14.
Auf Sky Krimi schalten und ne Stunde warten. Dann den Verlängerer schreiben.

 

[dolce82]

Hab ich nun so abgeändert. Passwort hab ich ja da keines, oder?

Hab die Dreambox jetzt auch gleich mal neu gestartet.
Dann warte ich mal auf sky Krimi.

oscam.user

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-modern SVN r1116
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]

user = ich
au = V14


user = a
pwd = b
au = 1
group = 1


[account]
user = aa
pwd = bb
au = 1
group = 1


[account]
user = aaa
pwd = bbb
au = 1
group = 1

Danke vorerst mal, vielleicht kommen ja dann mal wieder emm rein, eine erneute online Freischaltung hatte nichts gebracht

Sieht so aus als würde es mit dem "ich User" nicht klappen...

im Webif unter Status steht anstatt dem Client wo ich stehen soll - anonymous - AU OFF - Adress 0.0.0.0 - Port 0 - Protocol dvbapi

irgendwie stimmt wohl mit der Erkennung als Ich - User meiner Dreambox nicht

 

[salidos]

AW: Plötzlich kein aktuelles EMM Log mehr

group = 1 mal dazu

 

[dolce82]

AW: Plötzlich kein aktuelles EMM Log mehr

oscam.user

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-modern SVN r1116
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = ich
au = V14
group = 1

um diesen Eintrag hab ich die oscam.user erweitert

 

[salidos]

AW: Plötzlich kein aktuelles EMM Log mehr

Dann warte mal auf die emms.

 

[dolce82]

AW: Plötzlich kein aktuelles EMM Log mehr

also bis jetzt noch keine emm eingegangen, statistik unter reader 0

dvbapi user wird nach wie vor als anonymous nur erkannt (falls das wichtig ist)

 

[webman2]

AW: Plötzlich kein aktuelles EMM Log mehr

Das logfile nach Oscam-Start vollständig posten und nochmal ALLE korrigierten Oscam-Dateien.

 

[dolce82]

AW: Plötzlich kein aktuelles EMM Log mehr

oscam.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-modern SVN r1116
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = V14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
#blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
ndsversion = 2

[reader]
label = Emulator
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00

oscam.conf

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-modern SVN r1116
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /dev/tty
nice = -1
waitforcards = 1
preferlocalcards = 1

[newcamd]
port = 15040@098C:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 15000
nodeid = 34E18CA0104314C8
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
user = ich
boxtype = dreambox

[monitor]
port = 988
aulow = 120
monlevel = 4
hideclient_to = 0

[webif]
httpport = 15001
httprefresh = 7
httpallowed = 192.168.0.0-192.168.255.255,127.0.0.1
aulow = 120
hideclient_to = 0

oscam.user

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-modern SVN r1116
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = ich
au = V14
group = 1


user = aaa
pwd = bbb
caid = 098C
uniq = 3
au = 1
group = 1
cccmaxhops = 0
cccreshare = 0

[account]
user = aa
pwd = bb
caid = 098C
uniq = 3
au = 1
group = 1
cccmaxhops = 0
cccreshare = 0

[account]
user = a
pwd = b
caid = 098C
uniq = 3
au = 1
group = 1
cccmaxhops = 0
cccreshare = 0

oscam.dvbapi

Spoiler

[oscam.dvbapi]
P:098C 1
I:0

Logfile

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Jun 7 14:49:50 2015
-------------------------------------------------------------------------------
2015/06/07 14:49:50 0 s >> OSCam << cardserver started, version 1.20-modern, build r1116 (mipsel-unknown-linux-gnu)
2015/06/07 14:49:50 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 31085
2015/06/07 14:49:50 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2015/06/07 14:49:50 0 s userdb reloaded: 11 accounts loaded, 0 expired, 0 disabled
2015/06/07 14:49:50 0 s signal handling initialized
2015/06/07 14:49:50 0 s 203 service-id's loaded in 11 ms
2015/06/07 14:49:50 0 s monitor: initialized (fd=8, port=988)
2015/06/07 14:49:50 0 s newcamd: initialized (fd=9, port=15040)
2015/06/07 14:49:50 0 s -> CAID: 098C PROVID: 000000
2015/06/07 14:49:50 0 s cccam: initialized (fd=10, port=15000)
2015/06/07 14:49:50 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2015/06/07 14:49:50 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2015/06/07 14:49:50 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2015/06/07 14:49:50 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2015/06/07 14:49:50 0 s V14 [internal] creating thread for device /dev/sci0
2015/06/07 14:49:50 0 s Emulator [emu] creating thread for device Emulator
2015/06/07 14:49:50 5580C8 h webif: decompressed 162529 bytes back into 374336 bytes
2015/06/07 14:49:50 5580C8 h HTTP Server running. ip=0.0.0.0 port=15001
2015/06/07 14:49:50 551370 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2015/06/07 14:49:50 553030 r Emulator [emu] Reader initialized (device=Emulator, detect=cd, mhz=357, cardmhz=357)
2015/06/07 14:49:50 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/06/07 14:49:50 0 s waiting for local card init
2015/06/07 14:49:51 551370 r V14 [internal] card detected
2015/06/07 14:49:52 551370 r V14 [internal] ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2015/06/07 14:49:52 551370 r V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/06/07 14:49:52 551370 r V14 [internal] TEST tempo mhz check = 500 mhz
2015/06/07 14:49:52 551370 r V14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/06/07 14:49:52 551370 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/06/07 14:49:53 551370 r V14 [internal] Card type: P1TV
2015/06/07 14:49:53 551370 r V14 [internal] Rom version: 20AA
2015/06/07 14:49:53 551370 r V14 [internal] Credit available on card: 0 euro
2015/06/07 14:49:53 551370 r V14 [internal] Extended 4C detected
2015/06/07 14:49:53 551370 r V14 [internal] FuseByte: 25
2015/06/07 14:49:53 551370 r V14 [internal] Region Code: 00BO0102
2015/06/07 14:49:53 551370 r V14 [internal] Country Code: DEU
2015/06/07 14:49:54 551370 r V14 [internal] Pincode read: 2964
2015/06/07 14:49:54 551370 r V14 [internal] PCB settings: FF FF FF FF
2015/06/07 14:49:54 551370 r V14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/06/07 14:49:54 551370 r V14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/06/07 14:49:54 551370 r V14 [internal] ready for requests
2015/06/07 14:49:54 551370 r V14 [internal] found card system videoguard2
2015/06/07 14:49:54 551370 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/07 14:49:54 551370 r V14 [videoguard2] card detected
2015/06/07 14:49:54 551370 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/07 14:49:56 0 s init for all local cards done
2015/06/07 14:49:56 565438 c plain dvbapi-client granted (anonymous, au=off)
2015/06/07 14:49:56 565438 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/06/07 14:49:56 567A68 c client connected to 15040 port
2015/06/07 14:49:56 567A68 c encrypted newcamd:15040-client 192.168.2.100 granted (luca, au=auto (2 reader))
2015/06/07 14:49:56 567A68 c user aa authenticated successfully (vdr-sc)
2015/06/07 14:49:56 567A68 c AU enabled for user aa on reader V14
2015/06/07 14:49:56 569728 c encrypted cccam-client 84.145.131.43 granted (aaa, au=auto (2 reader))
2015/06/07 14:49:56 551370 r V14 [videoguard2] classD3 ins54: no cw --> Card is paired
2015/06/07 14:49:56 567A68 c aa (098C&000000/012D/000A/98:ED45408E7F69EA53D7BB93B9ACEDE308): not found (76 ms) by V14 - Sky Cinema
2015/06/07 14:49:56 551370 r V14 [videoguard2] classD3 ins54: no cw --> Card is paired
2015/06/07 14:49:56 567A68 c aa (098C&000000/012D/000A/98:8AC543A29FB13D143CA4EF119D420268): not found (59 ms) by V14 - Sky Cinema
2015/06/07 14:49:56 567A68 c aa (098C&000000/012D/000A/98:8AC543A29FB13D143CA4EF119D420268): not found (2 ms) by V14 - Sky Cinema
2015/06/07 14:49:57 567A68 c aa (098C&000000/012D/000A/98:8AC543A29FB13D143CA4EF119D420268): not found (3 ms) by V14 - Sky Cinema
2015/06/07 14:49:57 0 --- Skipped 1 duplicated log lines ---
2015/06/07 14:49:57 567A68 c aa (098C&000000/012D/000A/98:8AC543A29FB13D143CA4EF119D420268): not found (2 ms) by V14 - Sky Cinema
2015/06/07 14:49:57 567A68 c aa (098C&000000/012D/000A/98:8AC543A29FB13D143CA4EF119D420268): not found (3 ms) by V14 - Sky Cinema
2015/06/07 14:49:58 0 --- Skipped 1 duplicated log lines ---
2015/06/07 14:49:58 567A68 c aa (098C&000000/012D/000A/98:8AC543A29FB13D143CA4EF119D420268): not found (2 ms) by V14 - Sky Cinema
2015/06/07 14:49:59 0 --- Skipped 2 duplicated log lines ---
2015/06/07 14:49:59 567A68 c aa (098C&000000/012D/000A/98:8AC543A29FB13D143CA4EF119D420268): not found (6 ms) by V14 - Sky Cinema
2015/06/07 14:49:59 567A68 c aa(098C&000000/012D/000A/98:8AC543A29FB13D143CA4EF119D420268): not found (16 ms) by V14 - Sky Cinema
2015/06/07 14:49:59 565438 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/06/07 14:49:59 565438 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/06/07 14:49:59 565438 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/06/07 14:49:59 565438 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/06/07 14:49:59 565438 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/06/07 14:49:59 565438 c Found 5 ECMpids and 3 STREAMpids in PMT
2015/06/07 14:49:59 565438 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0008 index 0003 pmtpid 0061
2015/06/07 14:49:59 565438 c New program number: 0017 (1702:0017 unknown) [pmt_list_management 3]
2015/06/07 14:49:59 565438 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
2015/06/07 14:49:59 551370 r V14 [videoguard2] classD3 ins54: no cw --> Card is paired

Payload

Spoiler

• 2015/06/07 14:57:17 551370 r V14 [videoguard2] Decrypted payload
• 2015/06/07 14:57:17 551370 00 00 00 00 00 00 00 00 00 00 00 00 FF 00 22 02
• 2015/06/07 14:57:17 551370 00 80 0E 02 00 00 0F 06 00 10 20 00 00 11 20 04
• 2015/06/07 14:57:17 551370 00 00 00 00 25 11 00 00 00 00 00 00 00 00 00 00
• 2015/06/07 14:57:17 551370 00 00 00 00 00 00 00 2A 04 00 00 00 00 55 01 20
• 2015/06/07 14:57:17 551370 56 08 00 00 00 00 00 00 00 00 2B 02 00 00

Also auch im Payload ersichtlich das nix gepaired ist

Vielen Dank schon mal für eure Hilfe!

 

[webman2]

AW: Plötzlich kein aktuelles EMM Log mehr

Dir fehlen die enties.

Schon mal die ganze Box neugestartet?

 

[crazyfreak01]

AW: Plötzlich kein aktuelles EMM Log mehr

mich stören aber 2 Einträge im Log.

Spoiler

2015/06/07 14:49:53 551370 r V14 [internal] FuseByte: 25
2015/06/07 14:49:56 551370 r V14 [videoguard2] classD3 ins54: no cw --> Card is paired

 

[webman2]

AW: Plötzlich kein aktuelles EMM Log mehr

Fusebyte ...
- 00 bedeutet jungfräulich (die Karte ist noch nie freigeschaltet worden)
- 05 bedeutet aktiviert
- 25 bedeutet verlobt (aber noch nicht gepaired)

 

[dolce82]

AW: Plötzlich kein aktuelles EMM Log mehr

JA habe die Box neu gestartet

anbei nochmal ein Log direkt nach Neustart

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Jun 7 16:53:15 2015
-------------------------------------------------------------------------------
2015/06/07 16:53:15 0 s >> OSCam << cardserver started, version 1.20-modern, build r1116 (mipsel-unknown-linux-gnu)
2015/06/07 16:53:15 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 898
2015/06/07 16:53:15 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2015/06/07 16:53:15 0 s userdb reloaded: 11 accounts loaded, 0 expired, 0 disabled
2015/06/07 16:53:15 0 s signal handling initialized
2015/06/07 16:53:15 0 s 203 service-id's loaded in 25 ms
2015/06/07 16:53:15 0 s monitor: initialized (fd=5, port=988)
2015/06/07 16:53:15 0 s newcamd: initialized (fd=6, port=15040)
2015/06/07 16:53:15 0 s -> CAID: 098C PROVID: 000000
2015/06/07 16:53:15 0 s cccam: initialized (fd=7, port=15000)
2015/06/07 16:53:16 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2015/06/07 16:53:16 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2015/06/07 16:53:16 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2015/06/07 16:53:16 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2015/06/07 16:53:16 0 s V14 [internal] creating thread for device /dev/sci0
2015/06/07 16:53:16 0 s Emulator [emu] creating thread for device Emulator
2015/06/07 16:53:16 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/06/07 16:53:16 0 s waiting for local card init
2015/06/07 16:53:16 551370 h webif: decompressed 162529 bytes back into 374336 bytes
2015/06/07 16:53:16 551370 h HTTP Server running. ip=0.0.0.0 port=15001
2015/06/07 16:53:16 558338 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2015/06/07 16:53:16 559FF8 r Emulator [emu] Reader initialized (device=Emulator, detect=cd, mhz=357, cardmhz=357)
2015/06/07 16:53:17 558338 r V14 [internal] card detected
2015/06/07 16:53:18 558338 r V14 [internal] ATR: xx xx xx xx xx xx xx xx xx
2015/06/07 16:53:18 558338 r V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/06/07 16:53:18 558338 r V14 [internal] TEST tempo mhz check = 500 mhz
2015/06/07 16:53:18 558338 r V14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/06/07 16:53:19 558338 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/06/07 16:53:20 558338 r V14 [internal] Card type: P1TV
2015/06/07 16:53:20 558338 r V14 [internal] Rom version: 20AA
2015/06/07 16:53:20 558338 r V14 [internal] Credit available on card: 0 euro
2015/06/07 16:53:20 558338 r V14 [internal] Extended 4C detected
2015/06/07 16:53:20 558338 r V14 [internal] FuseByte: 25
2015/06/07 16:53:20 558338 r V14 [internal] Region Code: 00BO0102
2015/06/07 16:53:20 558338 r V14 [internal] Country Code: DEU
2015/06/07 16:53:20 558338 r V14 [internal] Pincode read: 2964
2015/06/07 16:53:20 558338 r V14 [internal] PCB settings: FF FF FF FF
2015/06/07 16:53:20 558338 r V14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/06/07 16:53:20 558338 r V14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/06/07 16:53:20 558338 r V14 [internal] ready for requests
2015/06/07 16:53:20 558338 r V14 [internal] found card system videoguard2
2015/06/07 16:53:20 558338 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/07 16:53:20 558338 r V14 [videoguard2] card detected
2015/06/07 16:53:20 558338 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/07 16:53:22 0 s init for all local cards done
2015/06/07 16:53:22 568968 c plain dvbapi-client granted (anonymous, au=off)
2015/06/07 16:53:22 568968 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/06/07 16:53:45 55E5B8 c client connected to 15040 port
2015/06/07 16:53:45 55E5B8 c encrypted newcamd:15040-client 192.168.2.100 granted (luca, au=auto (2 reader))
2015/06/07 16:53:45 55E5B8 c user aa authenticated successfully (vdr-sc)
2015/06/07 16:53:45 55E5B8 c AU enabled for user luca on reader V14
2015/06/07 16:53:45 558338 r V14 [videoguard2] classD3 ins54: no cw --> Card is paired
2015/06/07 16:53:45 55E5B8 c aa (098C&000000/012D/000A/98:F9182F4ED13C0CBA04875C9E27388AAC): not found (65 ms) by V14 - Sky Cinema

Genau, die entitlements fehlen, es steht im WebIf CARDOK no entitlements


bisher musste ich dann immer nur manuell die EMM schreiben und dann lief wieder alles, jetzt bekomm ich leider keine EMM seit 01.05.2015 mehr