Oscam zeigt mir "ERROR - no entitlements".

[Caroline]

Ich denke alles richtig gemacht zu haben, aber die Oscam zeigt mir "ERROR - no entitlements".
Bin nach Anleitung vorgegangen.

Logfiles wurden auch keine angelegt.
Oscam meldet:

Spoiler

• 2015/01/26 15:06:50 557F28 r (reader) V14 [videoguard2] Reader sci internal, detected box type: cuberevo-mini2
• 2015/01/26 15:06:51 557F28 r (reader) V14 [videoguard2] card detected
• 2015/01/26 15:06:55 557F28 r (reader) V14 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
• 2015/01/26 15:06:55 557F28 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2015/01/26 15:06:55 557F28 r (reader) V14 [internal] Calculated work ETU is 4.65 us reader mhz = 500
• 2015/01/26 15:06:55 557F28 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 78874
• 2015/01/26 15:06:57 557F28 r (reader) V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/01/26 15:06:59 555550 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/01/26 15:07:00 557F28 r (reader) V14 [internal] card system not supported
• 2015/01/26 15:07:00 557F28 r (reader) V14 [internal] Normal mode failed, reverting to Deprecated Mode
• 2015/01/26 15:07:06 557F28 r (reader) V14 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
• 2015/01/26 15:07:06 557F28 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/01/26 15:07:06 557F28 r (reader) V14 [internal] Calculated work ETU is 74.40 us reader mhz = 500
• 2015/01/26 15:07:06 557F28 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 81782
• 2015/01/26 15:07:06 557F28 r (reader) V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/01/26 15:07:08 555550 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/01/26 15:07:09 557F28 r (reader) V14 [internal] card system not supported
• 2015/01/26 15:07:09 557F28 r (reader) V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/01/26 15:07:09 557F28 r (reader) V14 [internal] card initializing error
• 2015/01/26 15:07:14 555550 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Wo liegt der Fehler?

Box: Vizyon 820HD
Oscam: HDSC-Oscam-EMU-dev234-250-10277

oscam.config

Spoiler

[global]
#disablelog                    = 1
#logfile                       = stdout
logfile                       = /var/log/oscam/
nice                          = -1
emmlogdir                     = /var/log/oscam/emm.log/
lb_mode                       = 1
lb_save                       = 100
lb_nfb_readers                = 3

[cache]

[dvbapi]
enabled                       = 1
au                            = 1
delayer                       = 60
user                          = local-hdfreak
boxtype                       = dbox2

[webif]
httpport                      = 88
httprefresh                   = 10
httpallowed                   = 10.0.0.1-255.255.255.255

oscam.user

Spoiler

[account]
user                          = local-hdfreak
pwd                           = pass
group                         = 1,2,3
#au                            = 1
au                            = V14
#betatunnel                    = 1833.FFFF:1702

oscam.server

Spoiler

[reader] 
label                         = V14
#protocol                      = mouse
#device                        = /dev/ttyUSB0
protocol                      = internal
device                        = /dev/sci0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
detect                        = cd 
mhz                           = 357
cardmhz                       = 357
group                         = 1 
emmcache                      = 1,3,2 
ecmwhitelist                  = 098C:98,9B,97,57,91
emmcache                      = 1,1,10
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1
ndsversion                    = 2

oscam.dvbapi

Spoiler

##########   Sky Germany V14  ##################
P:098C 
I:0

 

[bombadil]

AW: Freischaltung der "neuen" V14 mit OScam

Moin,


hier könnte der Fehler liegen.


mhz = 357
cardmhz = 357

Je nach Oscam Version müssen andere Werte eingtragen werden. Lass dich mal vom Web Interface inspirieren.

Grüße
Bombadil

 

[Caroline]

AW: Freischaltung der "neuen" V14 mit OScam

@bombadil
im webif steht:
MHz: 500
Card MHz: 357

in der (Text-) config beide 357

 

[bombadil]

AW: Oscam zeigt mir "ERROR - no entitlements".

Hi,

lies bitte das Kleingedruckte:

Cardmhz Dreambox Mipsel: 2700, PPC: 3150, DM7025: 8300 ELSE set wanted cardinit speed. Default 357

Steht es bei dir nicht, dann ein Update des OScam

Grüße
Bombadil

 

[pehedima]

Oscam zeigt mir "ERROR - no entitlements".

Poste bitte ein logfile vom oscam Start bis zum Fehler. Dazu sollte im Parameter logfile auch ein Pfad mit Dateiname stehen.

Im Parameter emmlogdir sollte nur ein Verzeichnis und keine Datei.

Wofür brauchst du den LB?

Gesendet von meiner Handquetsche

 

[Caroline]

AW: Oscam zeigt mir "ERROR - no entitlements".

Hier das Log:

Spoiler

2015/01/26 16:09:37 5228E8 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/01/26 16:09:37 5228E8 r (reader) V14 [internal] Calculated work ETU is 18.60 us reader mhz = 500
2015/01/26 16:09:37 5228E8 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 82704
2015/01/26 16:09:40 5228E8 r (reader) V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/01/26 16:09:41 5228E8 r (reader) V14 [internal] Card type: P1TV
2015/01/26 16:09:41 5228E8 r (reader) V14 [internal] Rom version: 20AA
2015/01/26 16:09:41 5228E8 r (reader) V14 [internal] Credit available on card: 0 euro
2015/01/26 16:09:41 5228E8 r (reader) V14 [internal] Extended 4C detected
2015/01/26 16:09:41 5228E8 r (reader) V14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/01/26 16:09:41 5228E8 r (reader) V14 [internal] found card system videoguard2
2015/01/26 16:09:41 5228E8 r (reader) V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/26 16:09:41 5228E8 r (reader) V14 [videoguard2] card detected
2015/01/26 16:09:41 5228E8 r (reader) V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/01/26 16:09:42 0 s (main) init for all local cards done
2015/01/26 16:09:42 0 s (anticasc) anti cascading disabled
2015/01/26 16:09:42 5555F8 c (client) plain dvbapi-client granted (local-hdfreak, au=on (1 reader))
2015/01/26 16:09:42 5555F8 c (dvbapi) dvbapi channelcache loaded from /var/keys/oscam.ccache
2015/01/26 16:09:42 5555F8 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 4
2015/01/26 16:09:42 5228E8 r (reader) V14 [videoguard2] Deactivating card
2015/01/26 16:09:42 5228E8 r (reader) V14 [videoguard2] creating thread for device /dev/sci0
2015/01/26 16:09:42 557D88 r (reader) V14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2015/01/26 16:09:42 557D88 r (reader) V14 [videoguard2] Reader sci internal, detected box type: cuberevo-mini2
2015/01/26 16:09:42 557D88 r (reader) V14 [videoguard2] card detected
2015/01/26 16:09:44 5555F8 c (dvbapi) Demuxer #0 added new ecmpid #0 CAID: 1833 ECM_PID: 180B PROVID: 000000
2015/01/26 16:09:44 5555F8 c (dvbapi) Demuxer #0 added new ecmpid #1 CAID: 09C4 ECM_PID: 1B0B PROVID: 000000
2015/01/26 16:09:44 5555F8 c (dvbapi) Demuxer #0 added new ecmpid #2 CAID: 09AF ECM_PID: 1F0B PROVID: 000000
2015/01/26 16:09:44 5555F8 c (dvbapi) Demuxer #0 added new ecmpid #3 CAID: 098C ECM_PID: 1A0B PROVID: 000000
2015/01/26 16:09:44 5555F8 c (dvbapi) Demuxer #0 found 4 ECMpids and 2 STREAMpids in PMT
2015/01/26 16:09:44 5555F8 c (dvbapi) Demuxer #0 receiver wants to demux srvid 006B on adapter 0000 camask 0001 index 0000 pmtpid 0062
2015/01/26 16:09:44 5555F8 c (dvbapi) Demuxer #0 new program number: 006B (Sky Cinema Hits HD) [pmt_list_management 3]
2015/01/26 16:09:44 5555F8 c (dvbapi) Demuxer #0 no suitable readers found that can be used for decoding!
2015/01/26 16:09:46 557D88 r (reader) V14 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/01/26 16:09:46 557D88 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/01/26 16:09:46 557D88 r (reader) V14 [internal] Calculated work ETU is 4.65 us reader mhz = 500
2015/01/26 16:09:46 557D88 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 82662
2015/01/26 16:09:48 557D88 r (reader) V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/01/26 16:09:51 557D88 r (reader) V14 [internal] card system not supported
2015/01/26 16:09:51 557D88 r (reader) V14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/01/26 16:09:54 5555F8 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/01/26 16:09:57 557D88 r (reader) V14 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/01/26 16:09:57 557D88 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/01/26 16:09:57 557D88 r (reader) V14 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/01/26 16:09:57 557D88 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 82190
2015/01/26 16:09:57 557D88 r (reader) V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/01/26 16:10:00 557D88 r (reader) V14 [internal] card system not supported
2015/01/26 16:10:00 557D88 r (reader) V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/26 16:10:00 557D88 r (reader) V14 [internal] card initializing error
2015/01/26 16:10:01 5555F8 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/01/26 16:10:38 0 --- Skipped 5 duplicated log lines ---

LB ist im Moment und hier uninteressant...

 

[bombadil]

AW: Oscam zeigt mir "ERROR - no entitlements".

Moin,

da hast du noch nichts verändert.

2015/01/26 16:09:42 557D88 r (reader) V14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)

Grüße
Bombadil

 

[pehedima]

AW: Oscam zeigt mir "ERROR - no entitlements".

Wenn der LB uninteressant ist, dann deaktivieren.
Bitte den ATR nicht unkenntlich machen, ist nämlich bei allen Karten des gleichen Typs identisch.

Das logfile beginnt viel zu spät. Log vom oscam Start an posten.

Setze mal cardmhz = 2700 und mhz = 1
Oscam neu starten.

Vollständige oscam.log posten.


Gesendet von meiner Handquetsche

 

[Caroline]

AW: Oscam zeigt mir "ERROR - no entitlements".

Habe es jetzt mal so wie auf dem Streambord beschrieben geändert:
cardmhz = 368
mhz = 480

Spoiler

• 2015/01/26 16:26:13 0 s (anticasc) anti cascading disabled
• 2015/01/26 16:26:13 552788 c (client) plain dvbapi-client granted (local-hdfreak, au=on (1 reader))
• 2015/01/26 16:26:13 552788 c (dvbapi) dvbapi channelcache loaded from /var/keys/oscam.ccache
• 2015/01/26 16:26:13 552788 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 4
• 2015/01/26 16:26:13 52B3A0 r (reader) V14 [videoguard2] Deactivating card
• 2015/01/26 16:26:13 52B3A0 r (reader) V14 [videoguard2] creating thread for device /dev/sci0
• 2015/01/26 16:26:13 5548D0 r (reader) V14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=480, cardmhz=368)
• 2015/01/26 16:26:13 5548D0 r (reader) V14 [videoguard2] Reader sci internal, detected box type: cuberevo-mini2
• 2015/01/26 16:26:13 5548D0 r (reader) V14 [videoguard2] card detected
• 2015/01/26 16:26:16 552788 c (dvbapi) Demuxer #0 added new ecmpid #0 CAID: 1833 ECM_PID: 180B PROVID: 000000
• 2015/01/26 16:26:16 552788 c (dvbapi) Demuxer #0 added new ecmpid #1 CAID: 09C4 ECM_PID: 1B0B PROVID: 000000
• 2015/01/26 16:26:16 552788 c (dvbapi) Demuxer #0 added new ecmpid #2 CAID: 09AF ECM_PID: 1F0B PROVID: 000000
• 2015/01/26 16:26:16 552788 c (dvbapi) Demuxer #0 added new ecmpid #3 CAID: 098C ECM_PID: 1A0B PROVID: 000000
• 2015/01/26 16:26:16 552788 c (dvbapi) Demuxer #0 found 4 ECMpids and 2 STREAMpids in PMT
• 2015/01/26 16:26:16 552788 c (dvbapi) Demuxer #0 receiver wants to demux srvid 006B on adapter 0000 camask 0001 index 0000 pmtpid 0062
• 2015/01/26 16:26:16 552788 c (dvbapi) Demuxer #0 new program number: 006B (Sky Cinema Hits HD) [pmt_list_management 3]
• 2015/01/26 16:26:16 552788 c (dvbapi) Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/01/26 16:26:17 5548D0 r (reader) V14 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
• 2015/01/26 16:26:17 5548D0 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2015/01/26 16:26:17 5548D0 r (reader) V14 [internal] Calculated work ETU is 4.84 us reader mhz = 480
• 2015/01/26 16:26:17 5548D0 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 82811
• 2015/01/26 16:26:19 5548D0 r (reader) V14 [internal] ATR Fsmax is 5 MHz, clocking card to 4.80 (specified in reader->mhz)
• 2015/01/26 16:26:22 5548D0 r (reader) V14 [internal] card system not supported
• 2015/01/26 16:26:22 5548D0 r (reader) V14 [internal] Normal mode failed, reverting to Deprecated Mode
• 2015/01/26 16:26:24 552788 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/01/26 16:26:28 5548D0 r (reader) V14 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
• 2015/01/26 16:26:28 5548D0 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/01/26 16:26:28 5548D0 r (reader) V14 [internal] Calculated work ETU is 77.50 us reader mhz = 480
• 2015/01/26 16:26:28 5548D0 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 81627
• 2015/01/26 16:26:28 5548D0 r (reader) V14 [internal] ATR Fsmax is 5 MHz, clocking card to 4.80 (specified in reader->mhz)
• 2015/01/26 16:26:32 5548D0 r (reader) V14 [internal] card system not supported
• 2015/01/26 16:26:32 5548D0 r (reader) V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/01/26 16:26:32 5548D0 r (reader) V14 [internal] card initializing error
• 2015/01/26 16:26:32 552788 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!

 

[pehedima]

AW: Oscam zeigt mir "ERROR - no entitlements".

Du brauchst kein streamboard.

Wir haben hier alles, um deine Karte ans Laufen zu bringen.

Siehe mein vorherigen Beitrag.


Gesendet von meiner Handquetsche

 

[axel]

AW: Oscam zeigt mir "ERROR - no entitlements".

Hier wird es Dir doch vorgekaut:

Setze mal cardmhz = 2700 und mhz = 1
Oscam neu starten.

 

[Caroline]

AW: Oscam zeigt mir "ERROR - no entitlements".

Hab ich probiert.
Ein Logfile wird nicht geschrieben, obwohl so konfiguriert, daher Kopie vom LiveLog.

[global]
logfile = /var/log/oscam/oscam.log
nice = -1
maxlogsize = 100
emmlogdir = /var/log/oscam/emm.log/

Spoiler

• 2015/01/26 16:54:47 5228E8 r (reader) V14 [internal] Reader sci internal, detected box type: cuberevo-mini2
• 2015/01/26 16:54:47 0 s (reader) emulator [emu] creating thread for device emulator
• 2015/01/26 16:54:47 0 s (main) waiting for local card init
• 2015/01/26 16:54:47 5228E8 r (reader) V14 [internal] card detected
• 2015/01/26 16:54:47 52FF90 r key file not found in: /var/keys
• 2015/01/26 16:54:47 0 --- Skipped 1 duplicated log lines ---
• 2015/01/26 16:54:47 52FF90 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2015/01/26 16:54:47 524980 h (webif) webif: decompressed 253503 bytes back into 472744 bytes
• 2015/01/26 16:54:47 524980 h (webif) HTTP Server running. ip=0.0.0.0 port=88
• 2015/01/26 16:54:49 52FF90 r (reader) emulator [emu] card detected
• 2015/01/26 16:54:49 5228E8 r (reader) V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/01/26 16:54:49 5228E8 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/01/26 16:54:49 5228E8 r (reader) V14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
• 2015/01/26 16:54:49 5228E8 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 79831
• 2015/01/26 16:54:51 52FF90 r (reader) emulator [emu] found card system emu
• 2015/01/26 16:54:51 52FF90 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/01/26 16:54:51 52FF90 r key file not found in: /var/keys
• 2015/01/26 16:54:51 0 --- Skipped 1 duplicated log lines ---
• 2015/01/26 16:54:51 5228E8 r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
• 2015/01/26 16:54:52 5228E8 r (reader) V14 [internal] Card type: P1TV
• 2015/01/26 16:54:52 5228E8 r (reader) V14 [internal] Rom version: 20AA
• 2015/01/26 16:54:52 5228E8 r (reader) V14 [internal] Credit available on card: 0 euro
• 2015/01/26 16:54:52 5228E8 r (reader) V14 [internal] Extended 4C detected
• 2015/01/26 16:54:52 5228E8 r (reader) V14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/01/26 16:54:52 5228E8 r (reader) V14 [internal] found card system videoguard2
• 2015/01/26 16:54:52 5228E8 r (reader) V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/01/26 16:54:52 5228E8 r (reader) V14 [videoguard2] card detected
• 2015/01/26 16:54:52 5228E8 r (reader) V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/01/26 16:54:53 0 s (main) init for all local cards done
• 2015/01/26 16:54:53 0 s (anticasc) anti cascading disabled
• 2015/01/26 16:54:53 5556C0 c (client) plain dvbapi-client granted (local-hdfreak, au=on (1 reader))
• 2015/01/26 16:54:53 5556C0 c (dvbapi) dvbapi channelcache loaded from /var/keys/oscam.ccache
• 2015/01/26 16:54:53 5556C0 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 4
• 2015/01/26 16:54:53 5228E8 r (reader) V14 [videoguard2] Deactivating card
• 2015/01/26 16:54:54 5228E8 r (reader) V14 [videoguard2] creating thread for device /dev/sci0
• 2015/01/26 16:54:54 557EE0 r (reader) V14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
• 2015/01/26 16:54:54 557EE0 r (reader) V14 [videoguard2] Reader sci internal, detected box type: cuberevo-mini2
• 2015/01/26 16:54:54 557EE0 r (reader) V14 [videoguard2] card detected
• 2015/01/26 16:54:57 5556C0 c (dvbapi) Demuxer #0 added new ecmpid #0 CAID: 1833 ECM_PID: 180B PROVID: 000000
• 2015/01/26 16:54:57 5556C0 c (dvbapi) Demuxer #0 added new ecmpid #1 CAID: 09C4 ECM_PID: 1B0B PROVID: 000000
• 2015/01/26 16:54:57 5556C0 c (dvbapi) Demuxer #0 added new ecmpid #2 CAID: 09AF ECM_PID: 1F0B PROVID: 000000
• 2015/01/26 16:54:57 5556C0 c (dvbapi) Demuxer #0 added new ecmpid #3 CAID: 098C ECM_PID: 1A0B PROVID: 000000
• 2015/01/26 16:54:57 5556C0 c (dvbapi) Demuxer #0 found 4 ECMpids and 3 STREAMpids in PMT
• 2015/01/26 16:54:57 5556C0 c (dvbapi) Demuxer #0 receiver wants to demux srvid 006B on adapter 0000 camask 0001 index 0000 pmtpid 0062
• 2015/01/26 16:54:57 5556C0 c (dvbapi) Demuxer #0 new program number: 006B (Sky Cinema Hits HD) [pmt_list_management 5]
• 2015/01/26 16:54:57 5556C0 c (dvbapi) Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/01/26 16:54:57 557EE0 r (reader) V14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/01/26 16:54:57 557EE0 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2015/01/26 16:54:57 557EE0 r (reader) V14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
• 2015/01/26 16:54:57 557EE0 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 78695
• 2015/01/26 16:54:59 557EE0 r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
• 2015/01/26 16:55:02 557EE0 r (reader) V14 [internal] card system not supported
• 2015/01/26 16:55:02 557EE0 r (reader) V14 [internal] Normal mode failed, reverting to Deprecated Mode
• 2015/01/26 16:55:05 5556C0 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 20 value ff time_us 80
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 21 value ff time_us 79
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 22 value ff time_us 80
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 23 value ff time_us 81
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 24 value ff time_us 79
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 25 value ff time_us 78
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 26 value ff time_us 81
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 27 value ff time_us 81
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 28 value ff time_us 81
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 29 value ff time_us 82
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 30 value ff time_us 86
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 31 value ff time_us 81
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 32 value ff time_us 82
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 33 value ff time_us 80
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 34 value ff time_us 79
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 35 value ff time_us 82
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 36 value ff time_us 90
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 37 value ff time_us 80
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 38 value ff time_us 80
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 39 value ff time_us 83
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 40 value ff time_us 80
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 41 value ff time_us 78
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 42 value ff time_us 85
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 43 value ff time_us 81
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 44 value ff time_us 66
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 45 value ff time_us 65
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 46 value ff time_us 64
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 47 value ff time_us 65
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 48 value ff time_us 65
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 49 value ff time_us 63
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 50 value ff time_us 66
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 51 value ff time_us 65
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 52 value ff time_us 64
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 53 value ff time_us 62
• 2015/01/26 16:55:07 557EE0 r (reader) V14 [internal] Flush readed byte Nr 54 value ff time_us 4258
• 2015/01/26 16:55:08 557EE0 r (reader) V14 [internal] Buffers readed 54 bytes total time_us 112423
• 2015/01/26 16:55:08 557EE0 r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
• 2015/01/26 16:55:12 557EE0 r (reader) V14 [internal] card system not supported
• 2015/01/26 16:55:12 557EE0 r (reader) V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/01/26 16:55:12 557EE0 r (reader) V14 [internal] card initializing error
• 2015/01/26 16:55:13 5556C0 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!

 

[pehedima]

Oscam zeigt mir "ERROR - no entitlements".

Oscam legt generell keine Verzeichnisse an. Daher musst du sicherstellen das alle Verzeichnisse existieren, daher würde ich aus dem Pfad im logfile 'oscam/' löschen.

Das emmlogdir ist falsch am besten nur emmlogdir = eintragen (ohne Verzeichnis) dann werden alle EMM Logs in config Verzeichnis geschrieben. Oder existiert das entsprechende emm.log Verzeichnis inkl. Schreibrechte für oscam?


Gesendet von meiner Handquetsche

 

[bombadil]

AW: Oscam zeigt mir "ERROR - no entitlements".

Hi,

poste bitte mal die komplette Ausgabe der Seite ses WEB Interface

Files => Oscam Version

Grüße
Bombadil

 

[Caroline]

AW: Oscam zeigt mir "ERROR - no entitlements".

So das Log geht jetzt...

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Jan 26 17:32:13 2015
-------------------------------------------------------------------------------
2015/01/26 17:32:13 0 s >> OSCam << cardserver started, version 1.20-DEV-r234-EMU-r250, build r10277 (sh4-linux)
2015/01/26 17:32:13 0 s (main) System name = Linux
2015/01/26 17:32:13 0 s (main) Host name = Vizyon820HD
2015/01/26 17:32:13 0 s (main) Release = 2.6.32.59_stm24_0211
2015/01/26 17:32:13 0 s (main) Version = #1 PREEMPT Sat Sep 29 10:53:23 CEST 2012
2015/01/26 17:32:13 0 s (main) Machine = sh4
2015/01/26 17:32:13 0 s (main) Stb model = cuberevo-mini2
2015/01/26 17:32:13 0 s (config) services reloaded: 0 services freed, 10 services loaded, rejected 0
2015/01/26 17:32:13 0 s [Emu] OSEmu (built-in) version 710
2015/01/26 17:32:13 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/01/26 17:32:13 0 s (main) signal handling initialized
2015/01/26 17:32:13 0 s (config) 246 service-id's loaded in 21 ms
2015/01/26 17:32:13 0 s (config) 12 provid's loaded
2015/01/26 17:32:13 0 s (config) 5 lengths for caid guessing loaded
2015/01/26 17:32:13 0 s (reader) V14 [internal] creating thread for device /dev/sci0
2015/01/26 17:32:13 0 s (reader) emulator [emu] creating thread for device emulator
2015/01/26 17:32:13 0 s (main) waiting for local card init
2015/01/26 17:32:13 51BCA0 r key file not found in: /var/keys
2015/01/26 17:32:13 0 --- Skipped 1 duplicated log lines ---
2015/01/26 17:32:13 51BCA0 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/01/26 17:32:13 519E80 r (reader) V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/01/26 17:32:13 519E80 r (reader) V14 [internal] Reader sci internal, detected box type: cuberevo-mini2
2015/01/26 17:32:13 29900468 h (webif) webif: decompressed 253503 bytes back into 472744 bytes
2015/01/26 17:32:13 29900468 h (webif) HTTP Server running. ip=0.0.0.0 port=88
2015/01/26 17:32:14 51BCA0 r (reader) emulator [emu] card detected
2015/01/26 17:32:14 519E80 r (reader) V14 [internal] card detected
2015/01/26 17:32:17 51BCA0 r (reader) emulator [emu] found card system emu
2015/01/26 17:32:17 51BCA0 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/26 17:32:17 51BCA0 r key file not found in: /var/keys
2015/01/26 17:32:17 0 --- Skipped 1 duplicated log lines ---
2015/01/26 17:32:17 519E80 r (reader) V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/01/26 17:32:17 519E80 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/01/26 17:32:17 519E80 r (reader) V14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/01/26 17:32:17 519E80 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 82761
2015/01/26 17:32:19 519E80 r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/01/26 17:32:20 519E80 r (reader) V14 [internal] Card type: P1TV
2015/01/26 17:32:20 519E80 r (reader) V14 [internal] Rom version: 20AA
2015/01/26 17:32:20 519E80 r (reader) V14 [internal] Credit available on card: 0 euro
2015/01/26 17:32:20 519E80 r (reader) V14 [internal] Extended 4C detected
2015/01/26 17:32:20 519E80 r (reader) V14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/01/26 17:32:20 519E80 r (reader) V14 [internal] found card system videoguard2
2015/01/26 17:32:20 519E80 r (reader) V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/26 17:32:20 519E80 r (reader) V14 [videoguard2] card detected
2015/01/26 17:32:20 519E80 r (reader) V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/01/26 17:32:21 0 s (main) init for all local cards done
2015/01/26 17:32:21 0 s (anticasc) anti cascading disabled
2015/01/26 17:32:21 531E30 c (client) plain dvbapi-client granted (local-hdfreak, au=on (1 reader))
2015/01/26 17:32:21 531E30 c (dvbapi) dvbapi channelcache loaded from /var/keys/oscam.ccache
2015/01/26 17:32:21 531E30 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 4
2015/01/26 17:32:21 519E80 r (reader) V14 [videoguard2] Deactivating card
2015/01/26 17:32:22 519E80 r (reader) V14 [videoguard2] creating thread for device /dev/sci0
2015/01/26 17:32:22 539FD8 r (reader) V14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/01/26 17:32:22 539FD8 r (reader) V14 [videoguard2] Reader sci internal, detected box type: cuberevo-mini2
2015/01/26 17:32:22 539FD8 r (reader) V14 [videoguard2] card detected
2015/01/26 17:32:24 531E30 c (dvbapi) Demuxer #0 added new ecmpid #0 CAID: 1833 ECM_PID: 180B PROVID: 000000
2015/01/26 17:32:24 531E30 c (dvbapi) Demuxer #0 added new ecmpid #1 CAID: 09C4 ECM_PID: 1B0B PROVID: 000000
2015/01/26 17:32:24 531E30 c (dvbapi) Demuxer #0 added new ecmpid #2 CAID: 09AF ECM_PID: 1F0B PROVID: 000000
2015/01/26 17:32:24 531E30 c (dvbapi) Demuxer #0 added new ecmpid #3 CAID: 098C ECM_PID: 1A0B PROVID: 000000
2015/01/26 17:32:24 531E30 c (dvbapi) Demuxer #0 found 4 ECMpids and 3 STREAMpids in PMT
2015/01/26 17:32:24 531E30 c (dvbapi) Demuxer #0 receiver wants to demux srvid 006B on adapter 0000 camask 0001 index 0000 pmtpid 0062
2015/01/26 17:32:24 531E30 c (dvbapi) Demuxer #0 new program number: 006B (Sky Cinema Hits HD) [pmt_list_management 5]
2015/01/26 17:32:24 531E30 c (dvbapi) Demuxer #0 no suitable readers found that can be used for decoding!
2015/01/26 17:32:25 539FD8 r (reader) V14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/01/26 17:32:25 539FD8 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/01/26 17:32:25 539FD8 r (reader) V14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/01/26 17:32:25 539FD8 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 82817
2015/01/26 17:32:27 539FD8 r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/01/26 17:32:30 539FD8 r (reader) V14 [internal] card system not supported
2015/01/26 17:32:30 539FD8 r (reader) V14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/01/26 17:32:32 531E30 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 1 value ff time_us 65
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 2 value ff time_us 66
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 3 value ff time_us 64
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 4 value ff time_us 65
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 5 value ff time_us 62
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 6 value ff time_us 61
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 7 value ff time_us 63
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 8 value ff time_us 65
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 9 value ff time_us 60
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 10 value ff time_us 63
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 11 value ff time_us 63
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 12 value ff time_us 105
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 13 value ff time_us 66
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 14 value ff time_us 64
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 15 value ff time_us 65
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 16 value ff time_us 65
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 17 value ff time_us 66
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 18 value ff time_us 64
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 19 value ff time_us 61
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 20 value ff time_us 91
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 21 value ff time_us 66
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 22 value ff time_us 64
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 23 value ff time_us 65
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 24 value ff time_us 62
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 25 value ff time_us 62
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 26 value ff time_us 4611
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 27 value ff time_us 71
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 28 value ff time_us 65
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 29 value ff time_us 64
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 30 value ff time_us 62
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 31 value ff time_us 64
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 32 value ff time_us 62
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 33 value ff time_us 62
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 34 value ff time_us 61
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 35 value ff time_us 63
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 36 value ff time_us 60
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 37 value ff time_us 61
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 38 value ff time_us 62
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 39 value ff time_us 60
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 40 value ff time_us 60
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 41 value ff time_us 82
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 42 value ff time_us 64
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 43 value ff time_us 64
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 44 value ff time_us 64
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 45 value ff time_us 62
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 46 value ff time_us 61
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 47 value ff time_us 63
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 48 value ff time_us 60
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 49 value ff time_us 63
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 50 value ff time_us 60
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 51 value ff time_us 61
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 52 value ff time_us 58
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 53 value ff time_us 60
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Flush readed byte Nr 54 value ff time_us 7296
2015/01/26 17:32:35 539FD8 r (reader) V14 [internal] Buffers readed 54 bytes total time_us 114807
2015/01/26 17:32:36 539FD8 r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/01/26 17:32:39 539FD8 r (reader) V14 [internal] card system not supported
2015/01/26 17:32:39 539FD8 r (reader) V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/26 17:32:39 539FD8 r (reader) V14 [internal] card initializing error
2015/01/26 17:32:40 531E30 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/01/26 17:33:23 0 --- Skipped 6 duplicated log lines ---

Files > Oscam Version

Spoiler

Unix starttime: 1422289933
Starttime: 26.01.2015 17:32:13
Version: oscam-1.20-DEV-r234-EMU-r250-r10277
Compiler: sh4-linux
ConfigDir: /var/keys/
WebifPort: 88

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: yes
LED support: yes
Clockfix with realtime clock: yes
IPv6 support: no
Emulator support: yes

camd 3.3x: yes
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: no
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stinger: yes