oscam user
[account]
user = DM800se_06
pwd = test06
au = 1
group = 2
cccmaxhops = 2
cccreshare = 1
-----------------------------------------------------
oscam server
[reader]
label = hdplus_02_Schwarz
protocol =
smartreader
device = Serial:Reader CDB00A6
smargopatch = 1
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
ecmwhitelist = 89
detect = cd
mhz = 534
cardmhz = 343
ident = 1843:000000,003411,008011
group = 2
emmcache = 1,2,2,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-g = 1
auprovid = 000001
---------------------------------------------------------
oscam config
[global]
# Speicherpfad für OSCam-logfile. Wird bei der Installation automatisch
# auf das Arbeitsverzeichnis von oscam umgesetzt.
logfile = /var/log/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
cwlogdir = 0
# Verzeichnisangabe für emmlogdir.
# Ohne Angabe ist das das Arbeitsverzeichnis von oscam
emmlogdir = /var/media/ftp/addon/oscam/
clienttimeout = 5000
failbantime = 5
Failbancount = 3
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 100
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0
#httpallowed =127.0.0.1
#[dvbapi]
#read_sdt = 2
#write_sdt_prov = 1
#[monitor]
#port = 988
#nocrypt = 192.168.0.0-192.168.255.255
#aulow = 120
#hideclient_to = 30
#monlevel = 1
#appendchaninfo = 0
#[newcamd]
#port = 34002@1830:003411;34003@09c4:000000;34004@0b00:000000
#key = 0102030405060708091011121314
#allowed = 0.0.0.0-255.255.255.255
#keepalive = 0
[cccam]
port = 12000
reshare = 0
version = 2.2.1
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240
ignorereshare = 1
minimizecards = 0
nodeid = 30d5de61317edce5
[webif]
httpport = 83
httpuser =
httppwd =
# Speicherpfad für das Stylesheet. Wird bei der Installation automatisch
# auf das Arbeitsverzeichnis von oscam umgesetzt.
httpcss = /var/media/ftp/addon/oscam/Blue_Shadow_V.2.css
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly = 0
----------------------------------------------------------------------------
Client gbox
----------------------------------------------------------------------------
cwshare
# allow maximum 06 share level for recieved card data
I: { 03 }
# 01 repeat EMM's
# 00 consider every EMM only once
# 01 restart pid on overflow
# 1* reset ENX on every channel change
# 2* rezap after start (calling pzapit -rz --pal)
# *1 check/reset ENX freezes on FTA
# *2 check/reset ENX freezes on PayTV
# *3 check/reset ENX freezes on FTA and PayTV
# 00 write nothing in atack.txt
# 01 write into atack.txt: password is wrong
# 02 write into atack.txt: ID unknown
# 04 write into atack.txt: IP is wrong
# 08 write into atack.txt: port is worng
# 10 write into atack.txt: share.stat
# 20 create online.log for online/offline logging
# 3F write everything. (combine bits for other combinations)
# 4000 send ecm again after 4 Seconds if no reply.
# 6000 resync decode after 6 Seconds if net decode failed
N: { 00 00 20 00 2500 4500 }
# Send ECM's at maximum 5 cards (please use this as default)
X: { 05 }
# Send ECM's in any case to these card ID's, even they are more then X:
# some examples ...
# G: { 17020000 1234 }
# G: { 0B000000 ABCD }
# G: { 05021510 AB34 }
# G: { 0D03A000 A234 }
# cwshare.cfg sharing parameters
# M: { hostname { password }}
# D: { hostname { rx_port tx_port { password { loc_code net_code }}}}
#
# loc_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 0 | | | |
# +-+-+-+- level
#
# net_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 | | | | |
# | +-+-+-+- level
# +--------- drop level
zero cards
# example: D: { friend1.homeip.net { 8010 8020 { B142AB11 { 05 15 }}}}
#
# password
##M: { mydbox2.homeip.net { AA242456 }}
#
# Internet Friends rx tx password cod
##D: { friend1.homeip.net { 8010 8010 { B142AB11 { 5 5 }}}}
##D: { friend2.homelinux.net { 8010 8010 { 81BFF901 { 5 5 }}}}
#
# other local boxes
##D: { 192.168.0.51 { 8020 8020 { AB333441 { 5 5 }}}}
##D: { 192.168.0.52 { 8020 8020 { BA334B24 { 5 5 }}}}
------------------------------------------------------------------------------------------------
gbox config
# gbox config file
# Trace, Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 12 } 192.168.1.2 8024
# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# Display ECM messages on Konsole
# 00 dont show any ECMs
# 01 show only valid ECMs
# 02 show valid and bad ECMs with complete data display
C: { 01 }
# Display EMM messages on Konsole
# 00 dont show any EMMs
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }
# Auto Update
# 00 AU disable (default)
# 01 AU enable
# 02 AU auto
# 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }
# Key Update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }
# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# 04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3 coolstream
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025
# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
#
x * ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CWs, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
#V: { 00 10 } #Slot 1
#V: { 00 20 } #Slot 2
V: { 00 30 } #Slot 1+2
#V: { 00 3F } #Slot 1+2+SC8in1
# RS232 SSSP mode
# x debug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
R: { 00 } 9600
# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600
# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.
# Files, folders, devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 04 } /var/tmp/atack.txt // atack info file
#F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/null // ca device
#F: { 22 } /dev/null // dvr device
#F: { 23 } /dev/null // demux device
#F: { 31 } /dev/null // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
#F: { 43 } /dev/ttyUSB0 // rs232 com1# für externen Cardreader an com1 SC8in1 oder MCR 4/8 oder Smargo
#F: { 44 } /dev/ttyUSB1 // rs232 com2# für externen Cardreader an com2 SC8in1 oder MCR 4/8 oder Smargo
# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# Ist nicht Aktiv geschaltet ,also keine Funktion
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds
# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1
# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300
# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1
# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
