OSCAM Server/Client Problem ?

volume11 · 12. Juni 2013

Hi leute,

ich hab mir jetzt nach langem suchen etwas zusammen gebastelt, aber leider funktioniert es nicht

Du musst angemeldet sein, um Bilder zu sehen.

Meine Hardware:
Triplex Receiver
Rasberry Pi Oscam Server
Easymouse 2 Cardreader
Karte Unitymedia I12
oscam-ymod v18t39

PKT Team Image E2

Hier mein Log:

Client:

2000/01/01 1:01:17 1838 296BF000 s client timeout=5000 ms, fallback timeout=2500 ms, fallbacks=1, cache delay=160 ms
2000/01/01 1:01:17 1838 296BF000 s auth size=17920
2000/01/01 1:01:17 1838 296BF000 s services reloaded: 0 services freed, 8 services loaded
2000/01/01 1:01:17 1838 296BF000 s userdb reloaded: 2 accounts loaded, 0 expired, 1 disabled
2000/01/01 1:01:17 1838 296BF000 s signal handling initialized (type=sysv)
2000/01/01 1:01:17 1838 296BF000 s 270 service-id's loaded
2000/01/01 1:01:17 1838 296BF000 s can't open file "/var/keys//oscam.tiers" (err=2), no tier-id's loaded
2000/01/01 1:01:17 1838 296BF000 s 912 provid's loaded
2000/01/01 1:01:17 1838 296BF000 s can't open file "/var/keys//oscam.ird" (errno=2) irdeto guessing not loaded
2000/01/01 1:01:17 1838 296BF000 s monitor: disabled
2000/01/01 1:01:17 1838 296BF000 s camd33: disabled
2000/01/01 1:01:17 1838 296BF000 s camd35: disabled
2000/01/01 1:01:17 1838 296BF000 s cs378x: disabled
2000/01/01 1:01:17 1838 296BF000 s newcamd: disabled
2000/01/01 1:01:17 1838 296BF000 s cccam: disabled
2000/01/01 1:01:17 1838 296BF000 s radegast: disabled
2000/01/01 1:01:17 1838 296BF000 s http thread started
2000/01/01 1:01:17 1838 296BF000 s creating thread for device 192.xxxxxxxxx IP
2000/01/01 1:01:17 1838 2AEBF4C8 p proxy thread started (thread=2AEBF4C8, label=server, server=192.XXXXXX IP)
2000/01/01 1:01:17 1838 2A6BF4C8 h HTTP Server listening on port 88
2000/01/01 1:01:17 1838 296BF000 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 1:01:17 1838 296BF000 s waiting for local card init
2000/01/01 1:01:17 1838 296BF000 s init for all local cards done
2000/01/01 1:01:17 1838 296BF000 s anti cascading disabled
2000/01/01 1:01:17 1838 2B6BF4C8 c plain dvbapi-client granted (user1, au=off)
2000/01/01 1:01:17 1838 2B6BF4C8 c dvbapi: 3 entries read from oscam.dvbapi
2000/01/01 1:01:17 1838 2AEBF4C8 p proxy 192.XXXXXIP:88 (fd=13)

Das erscheint, wenn ich einen Sky Sender einschalte:

2000/01/01 1:01:17 1838 296BF000 s init for all local cards done
2000/01/01 1:01:17 1838 296BF000 s anti cascading disabled
2000/01/01 1:01:17 1838 2B6BF4C8 c plain dvbapi-client granted (user1, au=off)
2000/01/01 1:01:17 1838 2B6BF4C8 c dvbapi: 3 entries read from oscam.dvbapi
2000/01/01 1:01:17 1838 2AEBF4C8 p proxy 192.XXXXXX IP:88 (fd=13)
2000/01/01 1:03:15 1838 2B6BF4C8 c dvbapi: new program number: 6D67 (0000:6D67 unknown)
2013/06/12 18:06:27 1838 2B6BF4C8 c dvbapi: [ADD PID 0] CAID: 1831 ECM_PID: 0244 PROVID: 000000
2013/06/12 18:06:27 1838 2B6BF4C8 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 0245 PROVID: 000000
2013/06/12 18:06:27 1838 2B6BF4C8 c dvbapi: [ADD PID 2] CAID: 1850 ECM_PID: 0246 PROVID: 000000
2013/06/12 18:06:27 1838 2B6BF4C8 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 0A14 PROVID: 000000
2013/06/12 18:06:27 1838 2B6BF4C8 c dvbapi: [ADD PID 4] CAID: 1835 ECM_PID: 0A16 PROVID: 000000
2013/06/12 18:06:27 1838 2B6BF4C8 c dvbapi: new program number: 3333 (1831:3333 unknown)
2013/06/12 18:06:28 1838 2AEBF4C8 p 192.XXXXX IP: resolved ip=192.XXXXXX IP
2013/06/12 18:06:31 1838 2AEBF4C8 p WARNING: [casc_process_ecm] ecm pending table overflow !!
2013/06/12 18:06:31 1838 2AEBF4C8 p WARNING: [casc_process_ecm] ecm pending table overflow !!
2013/06/12 18:06:31 1838 2AEBF4C8 p WARNING: [casc_process_ecm] ecm pending table overflow !!
2013/06/12 18:06:31 1838 2AEBF4C8 p WARNING: [casc_process_ecm] ecm pending table overflow !!
2013/06/12 18:06:33 1838 2B6BF4C8 c user1 (1835&000000/3333/0A16/0000/89:2593/00-00): timeout (5008 ms) by server (try 2) - 1835:3333 unknown
2013/06/12 18:06:33 1838 2B6BF4C8 c user1 (1722&000000/3333/0245/0000/93:7DE3/00-00): timeout (5008 ms) by server (try 2) - 1722:3333 unknown
2013/06/12 18:06:33 1838 2B6BF4C8 c user1 (1831&000000/3333/0244/0000/4A:0963/00-00): timeout (5008 ms) by server (try 2) - 1831:3333 unknown
2013/06/12 18:06:33 1838 2B6BF4C8 c user1 (1838&000000/3333/0A14/0000/92:1948/00-00): timeout (5048 ms) by server (try 2) - 1838:3333 unknown
2013/06/12 18:06:33 1838 2B6BF4C8 c user1 (1850&000000/3333/0246/0000/B7:FB7F/00-00): timeout (5048 ms) by server (try 2) - 1850:3333 unknown
2013/06/12 18:06:33 1838 2B6BF4C8 c user1 (1835&000000/3333/0A16/0000/89:1AD8/00-00): timeout (5003 ms) by server (try 2) - 1835:3333 unknown
2013/06/12 18:06:33 1838 2B6BF4C8 c user1 (1838&000000/3333/0A14/0000/92:09FA/00-00): timeout (5004 ms) by server (try 2) - 1838:3333 unknown
2013/06/12 18:06:33 1838 2B6BF4C8 c user1 (1722&000000/3333/0245/0000/93:E38A/00-00): timeout (5004 ms) by server (try 2) - 1722:3333 unknown
2013/06/12 18:06:33 1838 2B6BF4C8 c user1 (1831&000000/3333/0244/0000/4A:C882/00-00): timeout (5004 ms) by server (try 2) - 1831:3333 unknown
2013/06/12 18:06:33 1838 2B6BF4C8 c user1 (1850&000000/3333/0246/0000/B7:AC50/00-00): timeout (5023 ms) by server (try 2) - 1850:3333 unknown

Und hier der Serverlog

Server:

2013/06/12 17:48:51 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8693 (arm-linux-gnueabihf)
2013/06/12 17:48:51 0 s creating pidfile /var/run/oscam.pid with pid 19363
2013/06/12 17:48:51 0 s services reloaded: 0 services freed, 16 services loaded, rejected 0
2013/06/12 17:48:51 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/06/12 17:48:51 0 s signal handling initialized
2013/06/12 17:48:51 0 s 334 service-id's loaded in 8ms
2013/06/12 17:48:51 0 s 10 provid's loaded
2013/06/12 17:48:51 0 s monitor: initialized (fd=5, port=988)
2013/06/12 17:48:51 0 s i12k1 [mouse] creating thread for device /dev/SkyDE
2013/06/12 17:48:51 0 s waiting for local card init
2013/06/12 17:48:51 847468 h webif: decompressed 50659 bytes back into 150400 bytes
2013/06/12 17:48:51 847468 h HTTP Server running. ip=0.0.0.0 port=88
2013/06/12 17:48:51 845810 r i12k1 [mouse] Reader initialized (device=/dev/SkyDE, detect=cd, mhz=800, cardmhz=600)
2013/06/12 17:48:52 845810 r i12k1 [mouse] card detected
2013/06/12 17:48:53 845810 r i12k1 [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2013/06/12 17:48:53 845810 r i12k1 [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2013/06/12 17:48:53 845810 r i12k1 [mouse] Calculated work ETU is 69.75 us
2013/06/12 17:48:53 845810 r i12k1 [mouse] ATR Fsmax is: 6 MHz, clocking card to wanted user cardspeed of 8.00 MHz (specified in reader->mhz)
2013/06/12 17:48:54 845810 r i12k1 [mouse] detect irdeto tunneled nagra card
2013/06/12 17:48:54 845810 r i12k1 [mouse] no rsa key configured -> using irdeto mode
2013/06/12 17:48:54 845810 r i12k1 [mouse] detect irdeto card
2013/06/12 17:48:54 845810 r i12k1 [mouse] caid: 1722, acs: 3.84, country code: TEL
2013/06/12 17:48:54 845810 r i12k1 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2013/06/12 17:48:57 845810 r i12k1 [mouse] active providers: 2 (000000,000000)
2013/06/12 17:48:57 845810 r i12k1 [mouse] found card system irdeto
2013/06/12 17:48:57 845810 r i12k1 [irdeto] entitlements for provider: 2, id: 000000
2013/06/12 17:48:57 845810 r i12k1 [irdeto] chid: 05F1, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:57 845810 r i12k1 [irdeto] chid: 04CE, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:57 845810 r i12k1 [irdeto] chid: 7D27, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:57 845810 r i12k1 [irdeto] chid: 05DF, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:57 845810 r i12k1 [irdeto] chid: 05DD, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:57 845810 r i12k1 [irdeto] chid: 0609, date: 2013/05/31 - 2013/08/07
2013/06/12 17:48:57 845810 r i12k1 [irdeto] chid: 000F, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:57 845810 r i12k1 [irdeto] chid: 05DE, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:57 845810 r i12k1 [irdeto] chid: 00F0, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:57 845810 r i12k1 [irdeto] chid: 05E7, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:58 845810 r i12k1 [irdeto] chid: 05E8, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:58 845810 r i12k1 [irdeto] chid: 7D23, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:58 845810 r i12k1 [irdeto] chid: 05FB, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:58 845810 r i12k1 [irdeto] chid: 0605, date: 2013/05/31 - 2013/09/06
2013/06/12 17:48:58 845810 r i12k1 [irdeto] ready for requests
2013/06/12 17:49:01 0 s init for all local cards done
2013/06/12 17:49:01 0 s anti cascading disabled

So und hier sind nun auch die Configs vom Raspberry Pi

oscam_conf

[global]
logfile = /var/log/oscam.log
logduplicatelines = 1
pidfile = /var/run/oscam.pid
fallbacktimeout = 2000
unlockparental = 1
nice = -20
maxlogsize = 1000
waitforcards_extra_delay = 3000
preferlocalcards = 1
dropdups = 1
lb_mode = 1
lb_save = 100
lb_stat_cleanup = 6
lb_savepath = /var/tmp/oscam.stat

[monitor]
port = 988
nocrypt = 192.168.178.0-192.168.178.255
aulow = 120
monlevel = 1
hideclient_to = 30

[webif]
httpport = 88

httprefresh = 10
httpallowed = 192.168.178.0-192.168.178.255
aulow = 120
hideclient_to = 30

Oscam_Server

[reader]
label = i12k1
protocol = mouse
device = /dev/SkyDE
caid = 1722,1835
boxid = 12345678
detect = cd
mhz = 800
cardmhz = 600
group = 1
emmcache = 1,3,2

Oscam_User

[account]
user = user1
group = 1

ich hab dann noch weitere dateien, ich weiß nicht ob ihr da auch was von braucht oscam_provid, oscam_srvid und oscam_services.

Und hier sind meine Configs vom Receiver Client

Oscam

[global]
logfile = /tmp/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 160
bindwait = 120
nice = -1
serialreadertimeout = 1500
maxlogsize = 2048
saveinithistory = 1
waitforcards = 1

[monitor]
monlevel = 0
appendchaninfo = 1

[dvbapi]
enabled = 1
request_mode = 1
au = 1
user = user1
boxtype = duckbox

[webif]
httpport = 88
httphelplang = de
httprefresh = 30
httpallowed = 127.0.0.1,192.168.178.0-192.168.178.254
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

[reader]
enable = 1
label = Server
protocol = camd35
device = 192.168.178.59,88
user = user1
password = password1
account = user1,password1
group = 1
#emmcache = 1,1,2

#[reader]
#label = sky_s02_a02_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 1702,1833
#boxkey = 1122334455667788
#detect = cd
#mhz = 600
#cardmhz = 600
#group = 1
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = sky_s02_a02_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 1702,1833
#boxkey = 1122334455667788
#detect = cd
#mhz = 600
#cardmhz = 600
#group = 1
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = sky_v13_card_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 09C4
#boxid = 12345678
#detect = cd
#group = 1
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = sky_v13_card_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 09C4
#boxid = 12345678
#detect = cd
#group = 1
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = sky_v14_card_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 098C
#boxid = 12345678
#detect = cd
#group = 1
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = sky_v14_card_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 098C
#boxid = 12345678
#detect = cd
#group = 1
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = hdplus_weiss_hd01_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 1830
#boxkey = A7642F57BC96D37C
#rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
#detect = cd
#mhz = 368
#cardmhz = 368
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = hdplus_weiss_hd01_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 1830
#boxkey = A7642F57BC96D37C
#rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
#detect = cd
#mhz = 368
#cardmhz = 368
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = hdplus_schwarz_hd02_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 1843
#boxkey = A7642F57BC96D37C
#rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
#mhz = 368
#cardmhz = 368
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = hdplus_schwarz_hd02_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 1843
#boxkey = A7642F57BC96D37C
#rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
#detect = cd
#mhz = 368
#cardmhz = 368
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = hdplus_schwarz_hd03_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 1860
#boxkey = A7642F57BC96D37C
#rsakey = 901E595152E67DFD5B134E1D195C4141B3BB1394A8AF4D6BF1D1085DCC4D9CBA5C73A06ED21FC3556B685498030BB1185766117565E39995EFBF72135C2817B7
#detect = cd
#mhz = 368
#cardmhz = 368
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = hdplus_schwarz_hd03_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 1860
#boxkey = A7642F57BC96D37C
#rsakey = 901E595152E67DFD5B134E1D195C4141B3BB1394A8AF4D6BF1D1085DCC4D9CBA5C73A06ED21FC3556B685498030BB1185766117565E39995EFBF72135C2817B7
#detect = cd
#mhz = 368
#cardmhz = 368
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = mtv_card_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 0B00
#detect = cd
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = mtv_card_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 0B00
#detect = cd
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = srg_viaccess_card_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 0500
#detect = cd
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = srg_viaccess_card_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 0500
#detect = cd
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = orf_card_cw_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 0D05
#detect = cd
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = orf_card_cw_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 0D05
#detect = cd
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = orf_ice_card_irdeto_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 0648
#boxkey = 48454C4C4F4F5246
#rsakey = 70FEA1692180154CD1C9777B2D7844927EE9B85D5EAF9FF0170B575E7BFE5D355FCBABFC6FE8667C281B853A03D12750270BB287C5756D9281F2CEF1D09AC219
#force_irdeto = 1
#detect = cd
#cardmhz = 600
#ident = 0648:000000
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = orf_ice_card_irdeto_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 0648
#boxkey = 48454C4C4F4F5246
#rsakey = 70FEA1692180154CD1C9777B2D7844927EE9B85D5EAF9FF0170B575E7BFE5D355FCBABFC6FE8667C281B853A03D12750270BB287C5756D9281F2CEF1D09AC219
#force_irdeto = 1
#detect = cd
#cardmhz = 600
#ident = 0648:000000
#group = 2
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = kabelbw_v23_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 098E
#boxid = 12345678
#detect = cd
#mhz = 368
#cardmhz = 368
#group = 1
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1

#[reader]
#label = kabelbw_v23_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 098E
#boxid = 12345678
#detect = cd
#mhz = 368
#cardmhz = 368
#group = 1
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1

#[reader]
#label = um02_card_>Slot_oben<
#enable = 0
#protocol = internal
#device = /dev/sci0
#key = 0102030405060708091011121314
#caid = 1838
#boxkey = A7642F57BC96D37C
#rsakey = B55E0EB0562805F1788BDA0CD8B856BF696CFF1CBF4ED62B85E643F385B0F8899275DEA669AC77BDA43A20CCB844A3AF5A2BE0622779FAB153D156957DF367FF
#detect = cd
#mhz = 368
#cardmhz = 368
#group = 1
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = um02_card_>Slot_unten<
#enable = 0
#protocol = internal
#device = /dev/sci1
#key = 0102030405060708091011121314
#caid = 1838
#boxkey = A7642F57BC96D37C
#rsakey = B55E0EB0562805F1788BDA0CD8B856BF696CFF1CBF4ED62B85E643F385B0F8899275DEA669AC77BDA43A20CCB844A3AF5A2BE0622779FAB153D156957DF367FF
#detect = cd
#mhz = 368
#cardmhz = 368
#group = 1
#blockemm-u = 0
#blockemm-s = 0
#blockemm-g = 1
#blockemm-unknown = 1
#emmcache = 1,1,2

#[reader]
#label = cccam_server_1
#enable = 0
#protocol = cccam
#device = blabla.dyndns.com,16001
#key = 0102030405060708091011121314
#user = user01
#password = pass01
#group = 3
#cccversion = 2.0.11

#[reader]
#label = newcamd_server_1
#enable = 0
#protocol = newcamd
#device = blablabla.dyndns.org,66666
#key = 0102030405060708091011121314
#user = user
#password = password
#group = 4

User:

[account]
user = local-hdfreak
pwd =
disabled = 1
group = 1,2,3,4,5
au = 1
betatunnel = 1833.FFFF:1702,1834.FFFF:1722,1835.FFFF:1722

[account]
user = user1
#pwd = pass1
description = Sky UM Share
#group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32
#hostname = 192.168.178.59
#uniq = 2
#monlevel = 0
#services = sky_bundesliga
#cccmaxhops = 0
#keepalive = 0

ich hoffe Ihr könnt was damit anfangen.

Vielen Dank

4gx35 · 12. Juni 2013

AW: OSCAM Server/Client Problem ?

ohne die configs kann man mit den logs wenig anfangen, immerhin wird die karte gelesen,
nimmLink ist nicht mehr aktiv. mit internem cccam und oscam mit cccam proxy reader

volume11 · 12. Juni 2013

AW: OSCAM Server/Client Problem ?

Hey, danke für die Antwort.

Ich habe jetzt die Configs rein geschrieben.

dodo83 · 12. Juni 2013

AW: OSCAM Server/Client Problem ?

beim server im user account passwort hinzufügen, au wehr auch von vorteil damit deine karte mit updates versorgt wird

Code:

[account]
user                          = user1
pwd                           = pass1
group                         = 1
au                            = i12k1

das wichtigste wär aber der cccam eintrag in der oscam.conf

Code:

[cccam]
port                          = 12000
version                       = 2.2.1
reshare                       = 1

am client dann den reader so, die restlichen können weg

Code:

[reader]
enable = 1
label = Server
protocol = cccam
device = serverIP,12000
user = user1
password = pass1
cccversion = 2.2.1
ccckeepalive = 1
group = 1

oscam.conf

Code:

[global]
logfile                        = /tmp/oscam.log
clienttimeout                = 5000
fallbacktimeout                = 2500
clientmaxidle                = 120
cachedelay                    = 160
bindwait                    = 120
nice                        = -1
serialreadertimeout            = 1500
maxlogsize                    = 2048
saveinithistory                = 1
waitforcards                = 1


[monitor]
monlevel                      = 0
appendchaninfo                = 1

[dvbapi]
enabled                       = 1
request_mode                  = 1
au                            = 1
user                          = local
boxtype                       = duckbox

[webif]
httpport                      = 88
httphelplang                  = de
httprefresh                   = 30
httpallowed                   = 127.0.0.1,192.168.178.0-192.168.178.254
httphideidleclients           = 0
httpreadonly                  = 0
httpsavefullcfg               = 0

oscam.user

Code:

[account]
user                          = local
pwd                           = 
group                         = 1
au                            = Server
betatunnel                    = 1835.FFFF:1722

volume11 · 12. Juni 2013

AW: OSCAM Server/Client Problem ?

Hey, vielen Dank.

Das probiere ich gleich mal aus.

aber ich hab noch eine Frage zum cccam Eintrag, eigentlich dachte ich, dass ich cccam garnicht benutzen kann da ich ja den GM Triplex habe, der ja kein CCCAM kann oder habe ich da was falsch verstanden?

4gx35 · 13. Juni 2013

AW: OSCAM Server/Client Problem ?

oscam hat internes cccam protokoll, dann wird kein normales CCcam benötigt,
vielleicht mal meine anleitung von anfang an lesen

Suche

Suche

OSCAM Server/Client Problem ?

volume11

Newbie

4gx35

volume11

Newbie

dodo83

volume11

Newbie

4gx35

Ähnliche Themen

Spenden Unterstützung