Oscam server bitte hilfe

[flusch]

Hy mein Problem ist ich will HD01 intern funkt,v14,s02,Orf ice, orf cw extern mit Smargos betreiben.
Hd01 läuft die anderen nicht hab alles mögliche ausprobiert einmal geht v14 dann wieder andere aber nie alle zugleich.Könnte mir jemand meine server datei kontolieren bzw editieren.
Oscam 8837

Spoiler

[reader]
label = sky
protocol = mouse
device = /dev/ttyUSB0
caid = 1702,1833
boxkey = 1122334455667788
force_irdeto = 1
ecmwhitelist = 1702:93;1833:89
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2




[reader]
label = skyv14
protocol = mouse
device = /dev/ttyUSB3
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2


[reader]
label = hdplus
protocol = internal
device = /dev/sci0
caid = 1830
boxkey = A+++C
rsakey = B+++5
ecmwhitelist = 92
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
auprovid = 003411



[reader]
label = ORFIrdeto
enable = 1
protocol = mouse
detect = cd
device = /dev/ttyUSB2
group = 5
caid = 0648
cardmhz = 600
autospeed = 1
force_irdeto = 1
rsakey = DF++A12D
boxkey = 1122334455667788
ecmwhitelist = 0648:3C,44,4C
boxid = 12345678
deprecated = 1
emmcache = 1,3,2
lb_weight = 100

[reader]
label = orf
protocol = mouse
device = /dev/ttyUSB1
caid = 0D05
detect = cd
mhz = 368
cardmhz = 368
group = 5
emmcache = 1,1,2

 

[waves]

AW: Oscam server bitte hilfe

Was ist der Server? Igel, Receiver......?
Wie sind die Smargos eingestellt?
Log vom Oscam Start, damit wir da fehler sehen können!

Und gaaaanz wichtig.....Configs und Logs IMMER verspoilern (zu finden beim antworten unter erweitert!)

 

[flusch]

AW: Oscam server bitte hilfe

Dm800
Smargos normal eingestellt Es funzt ja fast alles,cs von extern geht,auch auf lokalen gerät und smargos funzen unter cccam gut bräucht nur diese Serverdatei.
Gibt es was zu beachten wegen der usb zuordnung der smargos.
Log kann ich momentan nicht machen läuft zurzeit wieder auf cccam (abendprogramm)als server

 

[dodo83]

AW: Oscam server bitte hilfe

Probier mal die smargos per serial einzubinden über das smartreader protokoll

Gesendet von meinem GT-I9105P

 

[flusch]

AW: Oscam server bitte hilfe

Würde gerne weiter über usb hub fahren da ich ab und zu smargo an 2te dream hänge oder spielt das keine rolle und wo finde ich diese protokoll.danke

 

[dodo83]

AW: Oscam server bitte hilfe

hast du einen aktiven oder passiven hub?
Das smartreader protokoll kannst du auswählen beim einrichten des readers genauso wie das mouse protokoll, vorrausetzung ist das es in deine oscam mitcompiliert wurde

Gesendet von meinem GT-I9105P

 

[tureon]

AW: Oscam server bitte hilfe

Hast 2x group 1 und 2x group 5 drin

 

[flusch]

AW: Oscam server bitte hilfe

Hab aktiven hub und jeder reader hat eigene Gruppe

 

[4gx35]

AW: Oscam server bitte hilfe

es geht um smartreader protokoll, evtl. fehlt aber auf der dream etwas: korrekte oscam oder lib;
bei so vielen karten würde ich dir aber besser einen preiswerten cardserver empfehlen statt einer dreambox,
pogoplug oder iomega iconnect, raspi, openwrt router

 

[pehedima]

AW: Oscam server bitte hilfe

Wenn du uns deine oscam.conf postest können wir dir sagen, wo du dein Logfile findest. Ansonsten mal im oscam WebIf unter'Files' und dann 'logfile' nachschauen.

Gesendet von meiner Handquetsche

 

[flusch]

Hy nochmal hab noch immer keine config wurde nicht erstelt muß ich da was enablen oder so? Aber könntet ihr nicht trotzdem mal die server datei durchgehen möchte alle karten zu verfügung stellen hab auch eine rules mit symlink erstellt,die reader werden jetzt erkannt steht cardock(no entitlemens) Hd01 intern geht Orf cw geht Orf irdeto geht nicht s02 geht nicht V14 ging kurz nach oscam neustart error Dm800 oscam 8837

Spoiler

[reader] label = sky protocol = mouse device = /dev/S02 caid = 1702,1833 boxkey = 1122334455667788 force_irdeto = 1 ecmwhitelist = 1702:93;1833:89 detect = cd mhz = 600 cardmhz = 600 group = 1 emmcache = 1,3,2 [reader] label = skyv14 protocol = mouse device = /dev/V14 caid = 098C boxid = 12345678 detect = cd mhz = 357 cardmhz = 357 group = 2 emmcache = 1,3,2 [reader] label = hdplus protocol = internal device = /dev/sci0 caid = 1830 boxkey = A+++C rsakey = B+++5 ecmwhitelist = 92 detect = cd mhz = 368 cardmhz = 368 group = 3 emmcache = 1,3,2 auprovid = 003411 [reader] label = ORFIrdeto enable = 1 protocol = mouse detect = cd device = /dev/ORFice group = 5 caid = 0648 cardmhz = 600 autospeed = 1 force_irdeto = 1 rsakey = DF++A12D boxkey = 1122334455667788 ecmwhitelist = 0648:3C,44,4C boxid = 12345678 deprecated = 1 emmcache = 1,3,2 [reader] label = orf protocol = mouse device = /dev/ORFcw caid = 0D05 detect = cd mhz = 357 cardmhz = 357 group = 5 emmcache = 1,3,2 2 externe cccam server

vieleicht fehlt ja irgendwo ne kleinigkeit Oscam läuft ja clienten haben zugriff und ich habe auf externen server auch zugriff Bitte gebt mir einen tipp Hier noch logfile

Spoiler

------------------------------------------------------------------------------- >> OSCam > OSCam mhz) 2014/04/14 07:07:05 5526E0 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61 2014/04/14 07:07:05 5526E0 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255 2014/04/14 07:07:05 5526E0 r hdplus [internal] Calculated work ETU is 8.70 us 2014/04/14 07:07:05 5526E0 r hdplus [internal] ATR Fsmax is: 5 MHz, clocking card to 3.68 2014/04/14 07:07:05 5526E0 r hdplus [internal] Card responded ok for ifsd request of 251 2014/04/14 07:07:06 559010 r ORFIrdeto [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0 2014/04/14 07:07:06 559010 r ORFIrdeto [mouse] Setting baudrate to 32258 bps 2014/04/14 07:07:06 559010 r ORFIrdeto [mouse] Calculated work ETU is 31.00 us 2014/04/14 07:07:06 559010 r ORFIrdeto [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz) 2014/04/14 07:07:06 544680 r skyall [mouse] detect irdeto tunneled nagra card 2014/04/14 07:07:06 544680 r skyall [mouse] no rsa key configured -> using irdeto mode 2014/04/14 07:07:06 544680 r skyall [mouse] detect irdeto card 2014/04/14 07:07:06 55ABB0 r orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0 2014/04/14 07:07:06 55ABB0 r orf [mouse] Setting baudrate to 19200 bps 2014/04/14 07:07:06 55ABB0 r orf [mouse] Calculated work ETU is 52.10 us 2014/04/14 07:07:06 55ABB0 r orf [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz) 2014/04/14 07:07:06 546220 r skyv14 [mouse] Error activating card. 2014/04/14 07:07:06 5526E0 r hdplus [internal] detect native nagra card 2014/04/14 07:07:07 5526E0 r hdplus [internal] found card system nagra 2014/04/14 07:07:07 5526E0 r hdplus [nagra] ROM: D N A S P 1 4 2 2014/04/14 07:07:07 5526E0 r hdplus [nagra] REV: R e v G C 6 2014/04/14 07:07:07 5526E0 r hdplus [nagra] SER: ############ 2014/04/14 07:07:07 5526E0 r hdplus [nagra] CAID: 1830 2014/04/14 07:07:07 5526E0 r hdplus [nagra] Prv.ID: 00 00 34 11 (sysid) 2014/04/14 07:07:07 5526E0 r hdplus [nagra] Prv.ID: 00 00 00 00 2014/04/14 07:07:07 5526E0 r hdplus [nagra] IRD ID: ############ 2014/04/14 07:07:07 5526E0 r hdplus [nagra] active to: 2014/06/04 12:59 2014/04/14 07:07:07 559010 r ORFIrdeto [mouse] Hist. Bytes: TÄ 2014/04/14 07:07:07 559010 r ORFIrdeto [mouse] detect irdeto card 2014/04/14 07:07:07 559010 r ORFIrdeto [mouse] WARNING: ACS57 card can require the CamKey from config 2014/04/14 07:07:07 5526E0 r hdplus [nagra] ----------------------------------------- 2014/04/14 07:07:07 5526E0 r hdplus [nagra] |id |tier |valid from |valid to | 2014/04/14 07:07:07 5526E0 r hdplus [nagra] +----+--------+------------+------------+ 2014/04/14 07:07:07 5526E0 r hdplus [nagra] |8011|0064 |2009/12/17 |2010/12/18 | 2014/04/14 07:07:07 5526E0 r hdplus [nagra] |8011|0065 |2010/05/20 |2011/05/21 | 2014/04/14 07:07:07 5526E0 r hdplus [nagra] |8011|0BEA |2010/12/27 |2015/03/22 | 2014/04/14 07:07:07 5526E0 r hdplus [nagra] ----------------------------------------- 2014/04/14 07:07:07 5526E0 r hdplus [nagra] ready for requests 2014/04/14 07:07:07 55ABB0 r orf [mouse] card detected 2014/04/14 07:07:07 55ABB0 r orf [mouse] type: CryptoWorks 2014/04/14 07:07:09 546220 r skyv14 [mouse] Error activating card. 2014/04/14 07:07:12 0 --- Skipped 1 duplicated log lines --- 2014/04/14 07:07:12 546220 r skyv14 [mouse] card initializing error 2014/04/14 07:07:20 544680 r skyall [mouse] card system not supported 2014/04/14 07:07:20 544680 r skyall [mouse] Normal mode failed, reverting to Deprecated Mode 2014/04/14 07:07:21 544680 r skyall [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D 2014/04/14 07:07:21 544680 r skyall [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0 2014/04/14 07:07:21 544680 r skyall [mouse] Calculated work ETU is 62.00 us 2014/04/14 07:07:21 544680 r skyall [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz) 2014/04/14 07:07:22 544680 r skyall [mouse] detect irdeto tunneled nagra card 2014/04/14 07:07:22 544680 r skyall [mouse] no rsa key configured -> using irdeto mode 2014/04/14 07:07:22 544680 r skyall [mouse] detect irdeto card 2014/04/14 07:07:27 55ABB0 r orf [mouse] card system not supported 2014/04/14 07:07:27 55ABB0 r orf [mouse] Normal mode failed, reverting to Deprecated Mode 2014/04/14 07:07:28 55ABB0 r orf [mouse] ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00 2014/04/14 07:07:28 55ABB0 r orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0 2014/04/14 07:07:28 55ABB0 r orf [mouse] Calculated work ETU is 104.20 us 2014/04/14 07:07:28 55ABB0 r orf [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz) 2014/04/14 07:07:29 55ABB0 r orf [mouse] card detected 2014/04/14 07:07:29 55ABB0 r orf [mouse] type: CryptoWorks 2014/04/14 07:07:32 55ABB0 r orf [mouse] card system not supported 2014/04/14 07:07:32 55ABB0 r orf [mouse] card initializing error 2014/04/14 07:07:34 55FE90 p can't resolve premiere-cs.dyndns-wiki.com, error: Name or service not known 2014/04/14 07:07:47 559010 r ORFIrdeto [mouse] card detected 2014/04/14 07:07:47 559010 r ORFIrdeto [mouse] type: CryptoWorks 2014/04/14 07:08:02 544680 r skyall [mouse] card system not supported 2014/04/14 07:08:02 544680 r skyall [mouse] card initializing error 2014/04/14 07:08:05 55FE90 p can't resolve premiere-cs.dyndns-wiki.com, error: Name or service not known 2014/04/14 07:08:07 559010 r ORFIrdeto [mouse] card system not supported 2014/04/14 07:08:07 559010 r ORFIrdeto [mouse] Normal mode failed, reverting to Deprecated Mode 2014/04/14 07:08:08 559010 r ORFIrdeto [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00 2014/04/14 07:08:08 559010 r ORFIrdeto [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0 2014/04/14 07:08:08 559010 r ORFIrdeto [mouse] Calculated work ETU is 62.00 us 2014/04/14 07:08:08 559010 r ORFIrdeto [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz) 2014/04/14 07:08:09 559010 r ORFIrdeto [mouse] Hist. Bytes: TÄ 2014/04/14 07:08:09 559010 r ORFIrdeto [mouse] detect irdeto card 2014/04/14 07:08:09 559010 r ORFIrdeto [mouse] WARNING: ACS57 card can require the CamKey from config 2014/04/14 07:08:36 55FE90 p can't resolve premiere-cs.dyndns-wiki.com, error: Name or service not known 2014/04/14 07:08:49 559010 r ORFIrdeto [mouse] card detected 2014/04/14 07:08:49 559010 r ORFIrdeto [mouse] type: CryptoWorks 2014/04/14 07:09:07 55FE90 p can't resolve premiere-cs.dyndns-wiki.com, error: Name or service not known 2014/04/14 07:09:09 559010 r ORFIrdeto [mouse] card system not supported 2014/04/14 07:09:09 559010 r ORFIrdeto [mouse] card initializing error 2014/04/14 07:09:10 0 s init for all local cards done 2014/04/14 07:09:10 0 s anti cascading disabled 2014/04/14 07:09:10 58AA70 c plain dvbapi-client granted (local, au=auto (8 reader)) 2014/04/14 07:09:10 58AA70 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

Kann mir keiner helfen

 

[waves]

AW: Oscam server bitte hilfe

Hab mir mal erlaubt die Zeilenumbrüch reinzumachen....kann ja kein Schwein lesen

Spoiler

[reader]
label = sky
protocol = mouse
device = /dev/S02
caid = 1702,1833
boxkey = 1122334455667788
force_irdeto = 1
ecmwhitelist = 1702:93;1833:89
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2

[reader]
label = skyv14
protocol = mouse
device = /dev/V14
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2

[reader]
label = hdplus
protocol = internal
device = /dev/sci0
caid = 1830
boxkey = A+++C
rsakey = B+++5
ecmwhitelist = 92
detect = cd
mhz = 368
cardmhz = 368
group = 3
emmcache = 1,3,2
auprovid = 003411

[reader]
label = ORFIrdeto
enable = 1
protocol = mouse
detect = cd
device = /dev/ORFice
group = 5
caid = 0648
cardmhz = 600
autospeed = 1
force_irdeto = 1
rsakey = DF++A12D
boxkey = 1122334455667788
ecmwhitelist = 0648:3C,44,4C
boxid = 12345678
deprecated = 1
emmcache = 1,3,2

[reader]
label = orf
protocol = mouse
device = /dev/ORFcw
caid = 0D05
detect = cd
mhz = 357
cardmhz = 357
group = 5
emmcache = 1,3,2

2 externe cccam server

Spoiler

------------------------------------------------------------------------------- >> OSCam > OSCam mhz)
2014/04/14 07:07:05 5526E0 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/04/14 07:07:05 5526E0 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/04/14 07:07:05 5526E0 r hdplus [internal] Calculated work ETU is 8.70 us
2014/04/14 07:07:05 5526E0 r hdplus [internal] ATR Fsmax is: 5 MHz, clocking card to 3.68
2014/04/14 07:07:05 5526E0 r hdplus [internal] Card responded ok for ifsd request of 251
2014/04/14 07:07:06 559010 r ORFIrdeto [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2014/04/14 07:07:06 559010 r ORFIrdeto [mouse] Setting baudrate to 32258 bps
2014/04/14 07:07:06 559010 r ORFIrdeto [mouse] Calculated work ETU is 31.00 us
2014/04/14 07:07:06 559010 r ORFIrdeto [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2014/04/14 07:07:06 544680 r skyall [mouse] detect irdeto tunneled nagra card
2014/04/14 07:07:06 544680 r skyall [mouse] no rsa key configured -> using irdeto mode
2014/04/14 07:07:06 544680 r skyall [mouse] detect irdeto card
2014/04/14 07:07:06 55ABB0 r orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2014/04/14 07:07:06 55ABB0 r orf [mouse] Setting baudrate to 19200 bps
2014/04/14 07:07:06 55ABB0 r orf [mouse] Calculated work ETU is 52.10 us
2014/04/14 07:07:06 55ABB0 r orf [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)
2014/04/14 07:07:06 546220 r skyv14 [mouse] Error activating card.
2014/04/14 07:07:06 5526E0 r hdplus [internal] detect native nagra card
2014/04/14 07:07:07 5526E0 r hdplus [internal] found card system nagra
2014/04/14 07:07:07 5526E0 r hdplus [nagra] ROM: D N A S P 1 4 2
2014/04/14 07:07:07 5526E0 r hdplus [nagra] REV: R e v G C 6
2014/04/14 07:07:07 5526E0 r hdplus [nagra] SER: ############
2014/04/14 07:07:07 5526E0 r hdplus [nagra] CAID: 1830
2014/04/14 07:07:07 5526E0 r hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/04/14 07:07:07 5526E0 r hdplus [nagra] Prv.ID: 00 00 00 00
2014/04/14 07:07:07 5526E0 r hdplus [nagra] IRD ID: ############
2014/04/14 07:07:07 5526E0 r hdplus [nagra] active to: 2014/06/04 12:59
2014/04/14 07:07:07 559010 r ORFIrdeto [mouse] Hist. Bytes: TÄ
2014/04/14 07:07:07 559010 r ORFIrdeto [mouse] detect irdeto card
2014/04/14 07:07:07 559010 r ORFIrdeto [mouse] WARNING: ACS57 card can require the CamKey from config
2014/04/14 07:07:07 5526E0 r hdplus [nagra] -----------------------------------------
2014/04/14 07:07:07 5526E0 r hdplus [nagra] |id |tier |valid from |valid to |
2014/04/14 07:07:07 5526E0 r hdplus [nagra] +----+--------+------------+------------+
2014/04/14 07:07:07 5526E0 r hdplus [nagra] |8011|0064 |2009/12/17 |2010/12/18 |
2014/04/14 07:07:07 5526E0 r hdplus [nagra] |8011|0065 |2010/05/20 |2011/05/21 |
2014/04/14 07:07:07 5526E0 r hdplus [nagra] |8011|0BEA |2010/12/27 |2015/03/22 |
2014/04/14 07:07:07 5526E0 r hdplus [nagra] -----------------------------------------
2014/04/14 07:07:07 5526E0 r hdplus [nagra] ready for requests
2014/04/14 07:07:07 55ABB0 r orf [mouse] card detected
2014/04/14 07:07:07 55ABB0 r orf [mouse] type: CryptoWorks
2014/04/14 07:07:09 546220 r skyv14 [mouse] Error activating card.
2014/04/14 07:07:12 0 --- Skipped 1 duplicated log lines ---
2014/04/14 07:07:12 546220 r skyv14 [mouse] card initializing error
2014/04/14 07:07:20 544680 r skyall [mouse] card system not supported
2014/04/14 07:07:20 544680 r skyall [mouse] Normal mode failed, reverting to Deprecated Mode
2014/04/14 07:07:21 544680 r skyall [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/04/14 07:07:21 544680 r skyall [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/04/14 07:07:21 544680 r skyall [mouse] Calculated work ETU is 62.00 us
2014/04/14 07:07:21 544680 r skyall [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2014/04/14 07:07:22 544680 r skyall [mouse] detect irdeto tunneled nagra card
2014/04/14 07:07:22 544680 r skyall [mouse] no rsa key configured -> using irdeto mode
2014/04/14 07:07:22 544680 r skyall [mouse] detect irdeto card
2014/04/14 07:07:27 55ABB0 r orf [mouse] card system not supported
2014/04/14 07:07:27 55ABB0 r orf [mouse] Normal mode failed, reverting to Deprecated Mode
2014/04/14 07:07:28 55ABB0 r orf [mouse] ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00
2014/04/14 07:07:28 55ABB0 r orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2014/04/14 07:07:28 55ABB0 r orf [mouse] Calculated work ETU is 104.20 us
2014/04/14 07:07:28 55ABB0 r orf [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)
2014/04/14 07:07:29 55ABB0 r orf [mouse] card detected
2014/04/14 07:07:29 55ABB0 r orf [mouse] type: CryptoWorks
2014/04/14 07:07:32 55ABB0 r orf [mouse] card system not supported
2014/04/14 07:07:32 55ABB0 r orf [mouse] card initializing error
2014/04/14 07:07:34 55FE90 p can't resolve premiere-cs.dyndns-wiki.com, error: Name or service not known
2014/04/14 07:07:47 559010 r ORFIrdeto [mouse] card detected
2014/04/14 07:07:47 559010 r ORFIrdeto [mouse] type: CryptoWorks
2014/04/14 07:08:02 544680 r skyall [mouse] card system not supported
2014/04/14 07:08:02 544680 r skyall [mouse] card initializing error
2014/04/14 07:08:05 55FE90 p can't resolve premiere-cs.dyndns-wiki.com, error: Name or service not known
2014/04/14 07:08:07 559010 r ORFIrdeto [mouse] card system not supported
2014/04/14 07:08:07 559010 r ORFIrdeto [mouse] Normal mode failed, reverting to Deprecated Mode
2014/04/14 07:08:08 559010 r ORFIrdeto [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2014/04/14 07:08:08 559010 r ORFIrdeto [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2014/04/14 07:08:08 559010 r ORFIrdeto [mouse] Calculated work ETU is 62.00 us
2014/04/14 07:08:08 559010 r ORFIrdeto [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2014/04/14 07:08:09 559010 r ORFIrdeto [mouse] Hist. Bytes: TÄ
2014/04/14 07:08:09 559010 r ORFIrdeto [mouse] detect irdeto card
2014/04/14 07:08:09 559010 r ORFIrdeto [mouse] WARNING: ACS57 card can require the CamKey from config
2014/04/14 07:08:36 55FE90 p can't resolve premiere-cs.dyndns-wiki.com, error: Name or service not known
2014/04/14 07:08:49 559010 r ORFIrdeto [mouse] card detected
2014/04/14 07:08:49 559010 r ORFIrdeto [mouse] type: CryptoWorks
2014/04/14 07:09:07 55FE90 p can't resolve premiere-cs.dyndns-wiki.com, error: Name or service not known
2014/04/14 07:09:09 559010 r ORFIrdeto [mouse] card system not supported
2014/04/14 07:09:09 559010 r ORFIrdeto [mouse] card initializing error
2014/04/14 07:09:10 0 s init for all local cards done
2014/04/14 07:09:10 0 s anti cascading disabled
2014/04/14 07:09:10 58AA70 c plain dvbapi-client granted (local, au=auto (8 reader))
2014/04/14 07:09:10 58AA70 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

 

[jekahr]

AW: Oscam server bitte hilfe

gabs mit smargo und irdeto karten nicht probleme? glaube gelesen zu haben das die nur in der easymouse und intern laufen.

kannst du mal versuchen die karten im internen reader zum laufen zu bringen? dann könnte man zumindest mal das problem ein bisschen eingerenzen

 

[Mark_Aber]

AW: Oscam server bitte hilfe

hol dir eine mouse

 

[jekahr]

AW: Oscam server bitte hilfe

ach immer gleich alles neukaufen wo bleibt da der spaß?