Aktuelles
Von:
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

oscam / S02 / HD+

AW: oscam / S02 / SKY HD+

Ich glaube das ist die Card ID und bei der HD01 wäre das die 1830 oder mach ich einen Denkfehler?
 
AW: oscam / S02 / SKY HD+

Sorry hab mich verwurschtelt :-D 1830 ist auf jeden Fall eine Abfrage an Deine HD01.

Lass mal provid_id leer.
 
Zuletzt bearbeitet:
AW: oscam / S02 / SKY HD+

Jo habs schon edititiert, ICH hatte nen Denkfehler ;-) Lass mal beim reader CAID leer und in den Services bei HD+ die provid weg also so:

provid =

Hat bei uns auch geholfen.
 
AW: oscam / S02 / SKY HD+

Huhu,

benutzt du Smargos als Kartenleser? Und sicher dass die HD01 korrekt erkannt wird?

Ich habe bei mir folgende Erfahrung gemacht (Fritzbox 7141, OScam, Smargo FW 1.05, Protokoll: Smartreader):

Die HD01 allein geht bei mir mit folgenden Einstellungen: Auto, Normal, 0, 0 und Auto, Normal, 1, 0

Das gleiche gilt für die S02.

Stecken die beiden aber zusammen am HUB und stehen beide Reader noch auf Auto, Normal, 0, 0 geht zwar die S02, die HD01 aber nur so halb, mal wird sie erkannt, mal nicht, produziert aber fast nur timeouts.

Stellt man die HD01 auf Auto, Normal, 1, 0 bleibt das Problem erhalten. Nur wenn beide Reader auf Auto, Normal, 1, 0 gestellt sind, werden beide Karten zuverlässig erkannt und laufen auch.

Vielleicht hilft das.

Grüße
 
Hallo und danke für Tips und die Nachfragen. Leider bin ich nicht weiter gekommen. Die Smagos stehen remote ;-( Da komme ich nicht oft vorbei ;-( Ich bin beruflich sehr eingespannt und komme recht selten (außer nachts) dazu mich der Sache zu witmen. Ich vermute, mit den folgenden Logfiles jetzt im falschen Bereich zu sein, denn ich habe mich entschlossen zu einem Igel zu wechseln. Das Problem ist original wie bei der freetz. Sky läuft aber HD+ leider nicht.
Eventuell schiebt das hier jemand in einen anderen Bereich, aber Hilfe kann ich sicher trotzdem gebrauchen.

logfile
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Nov 21 22:03:02 2012
-------------------------------------------------------------------------------
2012/11/21 22:03:02 B740C6C0 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (i686-pc-linux)
2012/11/21 22:03:02 B740C6C0 s version=1.10rc-svn, build #6089, system=i686-pc-linux, nice=0
2012/11/21 22:03:02 B740C6C0 s client max. idle=120 sec, debug level=0
2012/11/21 22:03:02 B740C6C0 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2012/11/21 22:03:02 B740C6C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/11/21 22:03:02 B740C6C0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2012/11/21 22:03:02 B740C6C0 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2012/11/21 22:03:02 B740C6C0 s signal handling initialized (type=sysv)
2012/11/21 22:03:02 B740C6C0 s 306 service-id's loaded in 2ms
2012/11/21 22:03:02 B740C6C0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/11/21 22:03:02 B740C6C0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/11/21 22:03:02 B740C6C0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/11/21 22:03:02 B740C6C0 s monitor: disabled
2012/11/21 22:03:02 B740C6C0 s camd33: disabled
2012/11/21 22:03:02 B740C6C0 s camd35: disabled
2012/11/21 22:03:02 B740C6C0 s cs378x: disabled
2012/11/21 22:03:02 B740C6C0 s newcamd: initialized (fd=7, port=12666, ip=192.168.100.204, crypted)
2012/11/21 22:03:02 B740C6C0 s CAID: 1702
2012/11/21 22:03:02 B740C6C0 s provid #0: 000000
2012/11/21 22:03:02 B740C6C0 s newcamd: initialized (fd=8, port=12677, ip=192.168.100.204, crypted)
2012/11/21 22:03:02 B740C6C0 s CAID: 1830
2012/11/21 22:03:02 B740C6C0 s provid #0: 123456
2012/11/21 22:03:02 B740C6C0 s provid #1: 003411
2012/11/21 22:03:02 B740C6C0 s provid #2: 008011
2012/11/21 22:03:02 B740C6C0 s radegast: disabled
2012/11/21 22:03:02 B740C6C0 s http thread started
2012/11/21 22:03:02 B740C6C0 s creating thread for device 001:005
2012/11/21 22:03:02 B740C6C0 s creating thread for device 001:004
2012/11/21 22:03:02 B740C6C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/11/21 22:03:02 B740C6C0 s waiting for local card init
2012/11/21 22:03:02 B6BBDB70 r reader thread started (thread=B6BBDB70, label=skyde, device=001:004, detect=cd, mhz=600, cardmhz=600)
2012/11/21 22:03:02 B6BBDB70 r Using 0x82 as endpoint for smartreader hardware detection
2012/11/21 22:03:02 B6BBDB70 r Found smartreader device 001:004
2012/11/21 22:03:02 B73BEB70 r reader thread started (thread=B73BEB70, label=hdplus, device=001:005, detect=cd, mhz=368, cardmhz=368)
2012/11/21 22:03:02 B73BEB70 r Using 0x82 as endpoint for smartreader hardware detection
2012/11/21 22:03:02 B73CAB70 h HTTP Server listening on port 16006
2012/11/21 22:03:02 B73BEB70 r Found smartreader device 001:005
2012/11/21 22:03:02 B6BBDB70 r skyde card detected
2012/11/21 22:03:02 B73BEB70 r hdplus card detected
2012/11/21 22:03:05 B73BEB70 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/11/21 22:03:06 B73BEB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/11/21 22:03:08 B73BEB70 r detect native nagra card
2012/11/21 22:03:08 B6BBDB70 r ATR is malformed, it reports 14 historical bytes but there are only 8
2012/11/21 22:03:08 B6BBDB70 r ATR: 3B 0E 49 52 45 54 4F 20 43 80
2012/11/21 22:03:08 B6BBDB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2012/11/21 22:03:09 B6BBDB70 r card system not supported
2012/11/21 22:03:09 B6BBDB70 r Normal mode failed, reverting to Deprecated Mode
2012/11/21 22:03:14 B6BBDB70 r ATR is malformed, it reports 14 historical bytes but there are only 8
2012/11/21 22:03:14 B6BBDB70 r ATR: 3B 0E 49 52 45 54 4F 20 43 80
2012/11/21 22:03:15 B6BBDB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2012/11/21 22:03:16 B73BEB70 r card system not supported
2012/11/21 22:03:16 B73BEB70 r Normal mode failed, reverting to Deprecated Mode
2012/11/21 22:03:16 B6BBDB70 r card system not supported
2012/11/21 22:03:16 B6BBDB70 r card initializing error
2012/11/21 22:03:19 B73BEB70 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/11/21 22:03:19 B73BEB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/11/21 22:03:21 B73BEB70 r detect native nagra card
2012/11/21 22:03:23 B73BEB70 r card system not supported
2012/11/21 22:03:23 B73BEB70 r card initializing error
2012/11/21 22:03:24 B740C6C0 s init for all local cards done
2012/11/21 22:03:24 B740C6C0 s anti cascading disabled
2012/11/21 22:03:24 B53A2B70 c client connected to 12666 port
2012/11/21 22:03:24 B5396B70 c client connected to 12677 port
2012/11/21 22:03:24 B53AEB70 c client connected to 12677 port
2012/11/21 22:03:24 B53AEB70 c Connection closed to client
2012/11/21 22:03:24 B53AEB70 c thread B53AEB70 ended!
2012/11/21 22:03:24 B53BAB70 c client connected to 12666 port
2012/11/21 22:03:24 B53BAB70 c Connection closed to client
2012/11/21 22:03:24 B53BAB70 c thread B53BAB70 ended!
2012/11/21 22:03:24 B5396B70 c encrypted newcamd:12677-client 77.184.119.165 granted (satuser03, au=off)
2012/11/21 22:03:24 B5396B70 c user satuser03 authenticated successfully (CCcam)
2012/11/21 22:03:24 B5396B70 c AU disabled for user satuser03
2012/11/21 22:03:24 B53A2B70 c thread B53A2B70 ended!
2012/11/21 22:03:24 B5396B70 c satuser03 (1830&123456/EF75/92:54BB): rejected user ident (0 ms) (of 0 avail 0) (no card support 1830:123456)
2012/11/21 22:03:30 B5396B70 c satuser03 (1830&123456/EF75/92:4F92): rejected user ident (0 ms) (of 0 avail 0) (no card support 1830:123456)
2012/11/21 22:03:31 B53A2B70 c client connected to 12666 port
2012/11/21 22:03:31 B53A2B70 c encrypted newcamd:12666-client 77.184.119.165 granted (satuser03, au=off)
2012/11/21 22:03:31 B53A2B70 c user satuser03 authenticated successfully (CCcam)
2012/11/21 22:03:31 B53A2B70 c AU disabled for user satuser03
2012/11/21 22:03:38 B5396B70 c satuser03 (1830&123456/EF75/92:8674): rejected user ident (0 ms) (of 0 avail 0) (no card support 1830:123456)
2012/11/21 22:03:47 B5396B70 c satuser03 (1830&123456/EF75/92:ABA6): rejected user ident (0 ms) (of 0 avail 0) (no card support 1830:123456)
2012/11/21 22:03:54 B5396B70 c satuser03 (1830&123456/EF75/92:A8B9): rejected user ident (0 ms) (of 0 avail 0) (no card support 1830:123456)
2012/11/21 22:04:01 B5396B70 c satuser03 (1830&123456/EF75/92:8DA8): rejected user ident (0 ms) (of 0 avail 0) (no card support 1830:123456)

oscam.conf
# OSCam Konfiguration IPC - oscam.conf

[global]
serverip = 192.168.100.204
disablelog = 0
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 0
saveinithistory = 1
loghistorysize = 4096

[newcamd]
key = 0102030405060708091011121314
port = 12666@1702:000000;12677@1830:123456,003411,008011
keepalive = 1

[webif]
httpport = 16006
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 192.168.100.0-192.168.100.255

oscam.server
# OSCam Konfiguration IPC - oscam.server
[reader]
label = hdplus
protocol = smartreader
device = 001:005
services = hdplus
caid = 1830
rsakey = 8A...11
boxkey = A7...7C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2


[reader]
label = skyde
protocol = smartreader
device = 001:004
services = sky
caid = 1702,1833
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,3,2

oscam.user
# OSCam Konfiguration IPC - oscam.user

[account]
user = satxxxxxxx
pwd = satxxxxxxxx
group = 1,2
au = 0
betatunnel = 1833.FFFF:1702

- - - Aktualisiert - - -

BoerseMoerse schrieb:
Hat geklappt ?
Zum Vergrößern anklicken....

Hallo, leider nein. Bin auf Igel umgestiegen. Aber das Problem besteht weiterhin ;-(

- - - Aktualisiert - - -

Diebelsalt schrieb:
Huhu,

benutzt du Smargos als Kartenleser? Und sicher dass die HD01 korrekt erkannt wird?

Ich habe bei mir folgende Erfahrung gemacht (Fritzbox 7141, OScam, Smargo FW 1.05, Protokoll: Smartreader):

Die HD01 allein geht bei mir mit folgenden Einstellungen: Auto, Normal, 0, 0 und Auto, Normal, 1, 0

Das gleiche gilt für die S02.

Stecken die beiden aber zusammen am HUB und stehen beide Reader noch auf Auto, Normal, 0, 0 geht zwar die S02, die HD01 aber nur so halb, mal wird sie erkannt, mal nicht, produziert aber fast nur timeouts.

Stellt man die HD01 auf Auto, Normal, 1, 0 bleibt das Problem erhalten. Nur wenn beide Reader auf Auto, Normal, 1, 0 gestellt sind, werden beide Karten zuverlässig erkannt und laufen auch.

Vielleicht hilft das.

Grüße
Zum Vergrößern anklicken....

Hallo, danke für die Tips, hab es erst jetzt gelesen. Ja, ich benutze Smargos und mein Problem ist, das die Teile remote stehen. Aber ich komm da morgen vorbei. Dann check ich das mal genau. Eins ist sicher. Es ist die 1.7er Firmware drauf. Gruß Apollo

Hallo, habe mal beide Reader in der oscam.server vertauscht. Jetzt wird die Narga erkannt, aber nicht mehr ;-( Kann jemand helfen? DANKE

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Nov 21 22:48:27 2012
-------------------------------------------------------------------------------
2012/11/21 22:48:27 B74D66C0 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (i686-pc-linux)
2012/11/21 22:48:27 B74D66C0 s version=1.10rc-svn, build #6089, system=i686-pc-linux, nice=0
2012/11/21 22:48:27 B74D66C0 s client max. idle=120 sec, debug level=0
2012/11/21 22:48:27 B74D66C0 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2012/11/21 22:48:27 B74D66C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/11/21 22:48:27 B74D66C0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2012/11/21 22:48:27 B74D66C0 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2012/11/21 22:48:27 B74D66C0 s signal handling initialized (type=sysv)
2012/11/21 22:48:27 B74D66C0 s 306 service-id's loaded in 2ms
2012/11/21 22:48:27 B74D66C0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/11/21 22:48:27 B74D66C0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/11/21 22:48:27 B74D66C0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/11/21 22:48:27 B74D66C0 s monitor: disabled
2012/11/21 22:48:27 B74D66C0 s camd33: disabled
2012/11/21 22:48:27 B74D66C0 s camd35: disabled
2012/11/21 22:48:27 B74D66C0 s cs378x: disabled
2012/11/21 22:48:27 B74D66C0 s newcamd: initialized (fd=7, port=12666, ip=192.168.100.204, crypted)
2012/11/21 22:48:27 B74D66C0 s CAID: 1702
2012/11/21 22:48:27 B74D66C0 s provid #0: 000000
2012/11/21 22:48:27 B74D66C0 s newcamd: initialized (fd=8, port=12677, ip=192.168.100.204, crypted)
2012/11/21 22:48:27 B74D66C0 s CAID: 1830
2012/11/21 22:48:27 B74D66C0 s provid #0: 123456
2012/11/21 22:48:27 B74D66C0 s provid #1: 003411
2012/11/21 22:48:27 B74D66C0 s provid #2: 008011
2012/11/21 22:48:27 B74D66C0 s radegast: disabled
2012/11/21 22:48:27 B74D66C0 s http thread started
2012/11/21 22:48:27 B74D66C0 s creating thread for device 001:004
2012/11/21 22:48:27 B74D66C0 s creating thread for device 001:005
2012/11/21 22:48:27 B74D66C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/11/21 22:48:27 B74D66C0 s waiting for local card init
2012/11/21 22:48:27 B6C87B70 r reader thread started (thread=B6C87B70, label=skyde, device=001:005, detect=cd, mhz=600, cardmhz=600)
2012/11/21 22:48:27 B6C87B70 r Using 0x82 as endpoint for smartreader hardware detection
2012/11/21 22:48:27 B7488B70 r reader thread started (thread=B7488B70, label=hdplus, device=001:004, detect=cd, mhz=368, cardmhz=368)
2012/11/21 22:48:27 B7494B70 h HTTP Server listening on port 16006
2012/11/21 22:48:27 B6C87B70 r Found smartreader device 001:005
2012/11/21 22:48:27 B7488B70 r Using 0x82 as endpoint for smartreader hardware detection
2012/11/21 22:48:27 B7488B70 r Found smartreader device 001:004
2012/11/21 22:48:28 B6C87B70 r skyde card detected
2012/11/21 22:48:28 B7488B70 r hdplus card detected
2012/11/21 22:48:31 B6C87B70 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/11/21 22:48:31 B6C87B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2012/11/21 22:48:33 B6C87B70 r detect native nagra card
2012/11/21 22:48:33 B7488B70 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2012/11/21 22:48:34 B7488B70 r Maximum frequency for this card is formally 6 Mhz, clocking it to 3.69 Mhz
2012/11/21 22:48:35 B7488B70 r detect irdeto tunneled nagra card
2012/11/21 22:48:35 B7488B70 r rsa key configured -> using nagra mode
2012/11/21 22:48:36 B7488B70 r [nagra-reader] type: NAGRA, caid: 1833, IRD ID: FF FF FF FF
2012/11/21 22:48:36 B7488B70 r [nagra-reader] ProviderID: 00 00 04 01
2012/11/21 22:48:36 B7488B70 r [nagra-reader] active to: 2013/01/08 01:35
2012/11/21 22:48:41 B7488B70 r found cardsystem nagra
2012/11/21 22:48:41 B7488B70 r ROM: D N A S P 1 8 1
2012/11/21 22:48:41 B7488B70 r REV: D V R L 0 0
2012/11/21 22:48:41 B7488B70 r SER: ** ** ** **
2012/11/21 22:48:41 B7488B70 r CAID: 1833
2012/11/21 22:48:41 B7488B70 r Prv.ID: 00 00 04 01 (sysid)
2012/11/21 22:48:41 B7488B70 r Prv.ID: 00 00 00 00
2012/11/21 22:48:41 B7488B70 r [nagra-reader] ready for requests
2012/11/21 22:48:41 B6C87B70 r card system not supported
2012/11/21 22:48:41 B6C87B70 r Normal mode failed, reverting to Deprecated Mode
2012/11/21 22:48:44 B6C87B70 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/11/21 22:48:45 B6C87B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2012/11/21 22:48:47 B6C87B70 r detect native nagra card
2012/11/21 22:48:49 B6C87B70 r card system not supported
2012/11/21 22:48:49 B6C87B70 r card initializing error
2012/11/21 22:48:49 B74D66C0 s init for all local cards done
2012/11/21 22:48:49 B74D66C0 s anti cascading disabled
2012/11/21 22:48:49 B546CB70 c client connected to 12666 port
2012/11/21 22:48:49 B5460B70 c client connected to 12677 port
2012/11/21 22:48:49 B5478B70 c client connected to 12677 port
2012/11/21 22:48:49 B5478B70 c Connection closed to client
2012/11/21 22:48:49 B5478B70 c thread B5478B70 ended!
2012/11/21 22:48:49 B5484B70 c client connected to 12666 port
2012/11/21 22:48:49 B5484B70 c Connection closed to client
2012/11/21 22:48:49 B5484B70 c thread B5484B70 ended!
2012/11/21 22:48:49 B546CB70 c encrypted newcamd:12666-client 77.184.119.165 granted (satuser03, au=off)
2012/11/21 22:48:49 B546CB70 c user satuser03 authenticated successfully (CCcam)
2012/11/21 22:48:49 B546CB70 c AU disabled for user satuser03
2012/11/21 22:48:49 B5460B70 c thread B5460B70 ended!
2012/11/21 22:48:56 B5460B70 c client connected to 12677 port
2012/11/21 22:48:56 B5460B70 c encrypted newcamd:12677-client 77.184.119.165 granted (satuser03, au=off)
2012/11/21 22:48:56 B5460B70 c user satuser03 authenticated successfully (CCcam)
2012/11/21 22:48:56 B5460B70 c AU disabled for user satuser03
2012/11/21 22:48:59 B5460B70 c satuser03 (1830&123456/EF75/92:5D93): rejected user ident (0 ms) (of 0 avail 0) (no card support 1830:123456)
2012/11/21 22:49:06 B5460B70 c satuser03 (1830&123456/EF75/92:71FA): rejected user ident (0 ms) (of 0 avail 0) (no card support 1830:123456)
2012/11/21 22:49:14 B5460B70 c satuser03 (1830&123456/EF75/92:4AF4): rejected user ident (0 ms) (of 0 avail 0) (no card support 1830:123456)
2012/11/21 22:49:21 B5460B70 c satuser03 (1830&123456/EF75/92:7E12): rejected user ident (0 ms) (of 0 avail 0) (no card support 1830:123456)
 
Zuletzt bearbeitet von einem Moderator:
AW: oscam / S02 / SKY HD+

Huhu.

So sieht das bei mir aus, wenn die Smargos falsch konfiguriert sind. Du kannst die Zuordnung in der oscam.server auch nach der Seriennummer des Readers einstellen. Da gibt's ein schönes Howto dazu. Aber das wird nicht die Ursache des Problems sein.


Grüße
 
AW: oscam / S02 / SKY HD+

Hi,

im Moment wird deine S02 Karte im Nagra Modus gelesen, da ein rsakey vorhanden ist. In deiner oscam.server ist aber nur im Reader für die HD+ Karte eine solcher Key vorhanden. Dies bedeutet die Zuordnung der Reader stimmt nicht.
Da du jetzt auf einen Igel umgesteigen bist ist es ein leichtes die iSerial der Cardreader auszulesen. Schließe nur einen Cardreader an, geh ins WebIf von OScam, den Reiter Reader auswählen und anschließend "Scan USB" anklicken.
Jetzt suchst du dn Eintrag deines Cardreaders und schaust nach der Zeile mit iSerial3. Alles was dahinter steht ist die iSerial, welche du brauchst um deinen Smargo über die Serial anzusprechen
device = Serial:hierkommtjetztalleshinwasdasteht
Das machst du erst mit dem einen Smargo und anschließend mit dem zweitem Smargo.

Grüße

Kermit
 
Hi,

das funktioniert leider nicht. Mein Igel hat kein ttyUSB Device! In den Logs steht "it must be xxxx:xxxx! Also habe ich es so "device 001:004" Leider läuft nur Sky und nicht die HD+ Karte. Ist aber die ganze nacht im receiver gelaufen ;-( Ich bin am verzweifeln ;-( Hilfeeeeeeeee

Hier mein Logfile
>> OSCam << cardserver started at Fri Nov 23 07:47:01 2012
-------------------------------------------------------------------------------
2012/11/23 7:47:01 B742D6C0 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (i686-pc-linux)
2012/11/23 7:47:01 B742D6C0 s version=1.10rc-svn, build #6089, system=i686-pc-linux, nice=0
2012/11/23 7:47:01 B742D6C0 s client max. idle=120 sec, debug level=0
2012/11/23 7:47:01 B742D6C0 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2012/11/23 7:47:01 B742D6C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/11/23 7:47:01 B742D6C0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/11/23 7:47:01 B742D6C0 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2012/11/23 7:47:01 B742D6C0 s signal handling initialized (type=sysv)
2012/11/23 7:47:01 B742D6C0 s 204 service-id's loaded in 2ms
2012/11/23 7:47:01 B742D6C0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/11/23 7:47:01 B742D6C0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/11/23 7:47:01 B742D6C0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/11/23 7:47:01 B742D6C0 s monitor: disabled
2012/11/23 7:47:01 B742D6C0 s camd33: disabled
2012/11/23 7:47:01 B742D6C0 s camd35: disabled
2012/11/23 7:47:01 B742D6C0 s cs378x: disabled
2012/11/23 7:47:01 B742D6C0 s newcamd: initialized (fd=7, port=12666, ip=192.168.100.204, crypted)
2012/11/23 7:47:01 B742D6C0 s CAID: 1702
2012/11/23 7:47:01 B742D6C0 s provid #0: 000000
2012/11/23 7:47:01 B742D6C0 s newcamd: initialized (fd=8, port=12677, ip=192.168.100.204, crypted)
2012/11/23 7:47:01 B742D6C0 s CAID: 1830
2012/11/23 7:47:01 B742D6C0 s provid #0: 000004
2012/11/23 7:47:01 B742D6C0 s provid #1: 003411
2012/11/23 7:47:01 B742D6C0 s provid #2: 008011
2012/11/23 7:47:01 B742D6C0 s radegast: disabled
2012/11/23 7:47:01 B742D6C0 s http thread started
2012/11/23 7:47:01 B742D6C0 s creating thread for device 001:003
2012/11/23 7:47:01 B742D6C0 s creating thread for device 001:004
2012/11/23 7:47:01 B742D6C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/11/23 7:47:01 B742D6C0 s waiting for local card init
2012/11/23 7:47:01 B6BDEB70 r reader thread started (thread=B6BDEB70, label=hdplus, device=001:004, detect=cd, mhz=368, cardmhz=368)
2012/11/23 7:47:01 B6BDEB70 r Using 0x82 as endpoint for smartreader hardware detection
2012/11/23 7:47:01 B73DFB70 r reader thread started (thread=B73DFB70, label=skysat, device=001:003, detect=cd, mhz=600, cardmhz=600)
2012/11/23 7:47:01 B73EBB70 h HTTP Server listening on port 16006
2012/11/23 7:47:01 B6BDEB70 r Found smartreader device 001:004
2012/11/23 7:47:01 B73DFB70 r Using 0x82 as endpoint for smartreader hardware detection
2012/11/23 7:47:01 B73DFB70 r Found smartreader device 001:003
2012/11/23 7:47:02 B6BDEB70 r hdplus card detected
2012/11/23 7:47:02 B73DFB70 r skysat card detected
2012/11/23 7:47:05 B6BDEB70 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/11/23 7:47:05 B6BDEB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/11/23 7:47:07 B6BDEB70 r detect native nagra card
2012/11/23 7:47:07 B73DFB70 r ATR is malformed, it reports 14 historical bytes but there are only 8
2012/11/23 7:47:07 B73DFB70 r ATR: 3B 0E 49 52 45 54 4F 20 43 80
2012/11/23 7:47:08 B73DFB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2012/11/23 7:47:09 B73DFB70 r card system not supported
2012/11/23 7:47:09 B73DFB70 r Normal mode failed, reverting to Deprecated Mode
2012/11/23 7:47:14 B73DFB70 r ATR is malformed, it reports 14 historical bytes but there are only 8
2012/11/23 7:47:14 B73DFB70 r ATR: 3B 0E 49 52 45 54 4F 20 43 80
2012/11/23 7:47:15 B73DFB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2012/11/23 7:47:15 B6BDEB70 r card system not supported
2012/11/23 7:47:15 B6BDEB70 r Normal mode failed, reverting to Deprecated Mode
2012/11/23 7:47:16 B73DFB70 r card system not supported
2012/11/23 7:47:16 B73DFB70 r card initializing error
2012/11/23 7:47:18 B6BDEB70 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/11/23 7:47:19 B6BDEB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/11/23 7:47:21 B6BDEB70 r detect native nagra card
2012/11/23 7:47:23 B6BDEB70 r card system not supported
2012/11/23 7:47:23 B6BDEB70 r card initializing error

listsmargo
Looking for smartreader with an out endpoint = 0x82 :
bus 001, device 003 : 0403:6001 Smartreader (Device=001:003 EndPoint=0x82 insert in oscam.server 'Device = Serial:123456 ')
bus 001, device 004 : 0403:6001 Smartreader (Device=001:004 EndPoint=0x82 insert in oscam.server 'Device = Serial:456789 ')

listusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 002: ID 2001:f103 D-Link Corp. DUB-H7 7-port USB 2.0 hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 
Zuletzt bearbeitet von einem Moderator:
AW: oscam / S02 / SKY HD+

Ich meine Du hast IPC, Du klickst auf den link und hast direkt das Wiki auf ?!?! :-D Steht doch wie Du sie zuweisen sollst, sogar im log steht es ;-)

Das in die .server bei jedem Reader, anstatt xxxxx eben die Serial.

device = Serial:Reader xxxxxxx


LG
 
Zuletzt bearbeitet:
danke für den Tip, aber irgendwie scheine ich mich hier wohl falsch auszudrücken. Ich habe das mal entsprechend konfiguriert. Das Ergebnis sieht wie folgt aus:

oscam.server
device = Serial:123456

logfile
Smartreader device Serial:123456 not found

wenn ich das wie folgt konfiguriere, erkennt ipc zumindest meine Reader:

oscam.server
device = 0001:0004

logfile
Found smartreader device 0001:0004

Hallo, hab hier noch mal das aktuelle logfile hochgeladen. Ich verzweifle langsam ;-(

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Nov 23 14:09:48 2012
-------------------------------------------------------------------------------
2012/11/23 14:09:48 B74486C0 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (i686-pc-linux)
2012/11/23 14:09:48 B74486C0 s version=1.10rc-svn, build #6089, system=i686-pc-linux, nice=0
2012/11/23 14:09:48 B74486C0 s client max. idle=120 sec, debug level=0
2012/11/23 14:09:48 B74486C0 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2012/11/23 14:09:48 B74486C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/11/23 14:09:48 B74486C0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/11/23 14:09:48 B74486C0 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2012/11/23 14:09:48 B74486C0 s signal handling initialized (type=sysv)
2012/11/23 14:09:48 B74486C0 s 204 service-id's loaded in 2ms
2012/11/23 14:09:48 B74486C0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/11/23 14:09:48 B74486C0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/11/23 14:09:48 B74486C0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/11/23 14:09:48 B74486C0 s monitor: disabled
2012/11/23 14:09:48 B74486C0 s camd33: disabled
2012/11/23 14:09:48 B74486C0 s camd35: disabled
2012/11/23 14:09:48 B74486C0 s cs378x: disabled
2012/11/23 14:09:48 B74486C0 s newcamd: initialized (fd=7, port=12666, ip=192.168.xxx.xxx, crypted)
2012/11/23 14:09:48 B74486C0 s CAID: 1702
2012/11/23 14:09:48 B74486C0 s provid #0: 000000
2012/11/23 14:09:48 B74486C0 s newcamd: initialized (fd=8, port=12677, ip=192.168.xxx.xxx, crypted)
2012/11/23 14:09:48 B74486C0 s CAID: 1830
2012/11/23 14:09:48 B74486C0 s provid #0: 000004
2012/11/23 14:09:48 B74486C0 s provid #1: 003411
2012/11/23 14:09:48 B74486C0 s provid #2: 008011
2012/11/23 14:09:48 B74486C0 s radegast: disabled
2012/11/23 14:09:48 B74486C0 s http thread started
2012/11/23 14:09:48 B74486C0 s creating thread for device 0001:0003
2012/11/23 14:09:48 B74486C0 s creating thread for device 0001:0004
2012/11/23 14:09:48 B74486C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/11/23 14:09:48 B74486C0 s waiting for local card init
2012/11/23 14:09:48 B6BF9B70 r reader thread started (thread=B6BF9B70, label=hdplus, device=0001:0004, detect=cd, mhz=368, cardmhz=368)
2012/11/23 14:09:48 B6BF9B70 r Using 0x82 as endpoint for smartreader hardware detection
2012/11/23 14:09:48 B6BF9B70 r Found smartreader device 0001:0004
2012/11/23 14:09:48 B73FAB70 r reader thread started (thread=B73FAB70, label=skysat, device=0001:0003, detect=cd, mhz=600, cardmhz=600)
2012/11/23 14:09:48 B73FAB70 r Using 0x82 as endpoint for smartreader hardware detection
2012/11/23 14:09:48 B73FAB70 r Found smartreader device 0001:0003
2012/11/23 14:09:48 B7406B70 h HTTP Server listening on port 16006
2012/11/23 14:09:48 B6BF9B70 r hdplus card detected
2012/11/23 14:09:48 B73FAB70 r skysat card detected
2012/11/23 14:09:53 B6BF9B70 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/11/23 14:09:53 B6BF9B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/11/23 14:09:54 B73FAB70 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2012/11/23 14:09:54 B73FAB70 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/11/23 14:09:55 B6BF9B70 r detect native nagra card
2012/11/23 14:09:55 B73FAB70 r detect irdeto tunneled nagra card
2012/11/23 14:09:55 B73FAB70 r no rsa key configured -> using irdeto mode
2012/11/23 14:09:55 B73FAB70 r detect irdeto card
2012/11/23 14:09:55 B73FAB70 r caid: 1702, acs: 3.84, country code: GER
2012/11/23 14:09:55 B73FAB70 r providers: 4, ascii serial: *****, hex serial: *****, hex base: 1A
2012/11/23 14:09:58 B73FAB70 r active providers: 2 (000000,000000)
2012/11/23 14:09:58 B73FAB70 r found cardsystem irdeto
2012/11/23 14:09:58 B73FAB70 r entitlements for provider: 2, id: 000000
2012/11/23 14:09:58 B73FAB70 r chid: 0107, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:58 B73FAB70 r chid: 0108, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:58 B73FAB70 r chid: 7D2B, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:58 B73FAB70 r chid: 7D24, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:58 B73FAB70 r chid: 7D23, date: 2012/10/17 - 2013/01/09
2012/11/23 14:09:58 B73FAB70 r chid: 61BD, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:58 B73FAB70 r chid: 04BA, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:58 B73FAB70 r chid: 04C4, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:58 B73FAB70 r chid: 7D2C, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:58 B73FAB70 r chid: 7D2D, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 7D22, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03FF, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 05DC, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03F4, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03EC, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03EF, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03E9, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03ED, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03F3, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03F5, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03EB, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03F6, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03F9, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 0401, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 0402, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03F7, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 0403, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 0404, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03FA, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 041A, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 000F, date: 2012/10/17 - 2013/01/14
2012/11/23 14:09:59 B73FAB70 r chid: 7D21, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03DE, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03DF, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 0400, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03F1, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03EA, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03F2, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 7D27, date: 2012/10/17 - 2013/01/09
2012/11/23 14:09:59 B73FAB70 r chid: 03FD, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 00F0, date: 2012/10/17 - 2013/01/14
2012/11/23 14:09:59 B73FAB70 r chid: 0515, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 03E8, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 0514, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 044C, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 00F5, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 0069, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 0102, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 026C, date: 2008/01/19 - 2008/01/21
2012/11/23 14:09:59 B73FAB70 r chid: 028B, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 028C, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 028D, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 028E, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 028F, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 0290, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 029E, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 0291, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 0292, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 0293, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 0294, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 0295, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 028A, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 0298, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 0299, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 029A, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 029B, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 029C, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 029D, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 0103, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:00 B73FAB70 r chid: 029C, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:01 B73FAB70 r chid: 0104, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:01 B73FAB70 r chid: 0406, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:01 B73FAB70 r chid: 0105, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:01 B73FAB70 r chid: 0004, date: 2008/01/19 - 2008/01/21
2012/11/23 14:10:01 B73FAB70 r chid: 05DF, date: 2012/10/17 - 2013/01/09
2012/11/23 14:10:01 B73FAB70 r chid: 04CE, date: 2012/10/17 - 2013/01/14
2012/11/23 14:10:01 B73FAB70 r chid: 0605, date: 2012/10/17 - 2013/01/09
2012/11/23 14:10:01 B73FAB70 r chid: 05E8, date: 2012/10/17 - 2013/01/09
2012/11/23 14:10:01 B73FAB70 r chid: 0276, date: 2012/10/17 - 2013/01/09
2012/11/23 14:10:01 B73FAB70 r chid: 05F1, date: 2012/10/17 - 2013/01/09
2012/11/23 14:10:01 B73FAB70 r chid: 05FB, date: 2012/10/17 - 2013/01/09
2012/11/23 14:10:01 B73FAB70 r chid: 05DE, date: 2012/10/17 - 2013/01/09
2012/11/23 14:10:01 B73FAB70 r chid: 05E7, date: 2012/10/17 - 2013/01/09
2012/11/23 14:10:01 B73FAB70 r chid: 0609, date: 2012/10/17 - 2013/01/09
2012/11/23 14:10:01 B73FAB70 r chid: 05DD, date: 2012/10/17 - 2013/01/14
2012/11/23 14:10:01 B73FAB70 r [irdeto-reader] ready for requests
2012/11/23 14:10:03 B6BF9B70 r card system not supported
2012/11/23 14:10:03 B6BF9B70 r Normal mode failed, reverting to Deprecated Mode
2012/11/23 14:10:06 B6BF9B70 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/11/23 14:10:07 B6BF9B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/11/23 14:10:09 B6BF9B70 r detect native nagra card
2012/11/23 14:10:11 B6BF9B70 r card system not supported
2012/11/23 14:10:11 B6BF9B70 r card initializing error
2012/11/23 14:10:11 B74486C0 s init for all local cards done
2012/11/23 14:10:11 B74486C0 s anti cascading disabled
2012/11/23 14:10:11 B53DEB70 c client connected to 12666 port
2012/11/23 14:10:11 B53DEB70 c Connection closed to client
2012/11/23 14:10:11 B53DEB70 c thread B53DEB70 ended!
2012/11/23 14:10:11 B53D2B70 c client connected to 12677 port
2012/11/23 14:10:11 B53EAB70 c client connected to 12677 port
2012/11/23 14:10:11 B53EAB70 c Connection closed to client
2012/11/23 14:10:11 B53EAB70 c thread B53EAB70 ended!
2012/11/23 14:10:11 B53F6B70 c client connected to 12666 port
2012/11/23 14:10:11 B53F6B70 c Connection closed to client
2012/11/23 14:10:11 B53F6B70 c thread B53F6B70 ended!
 
Zuletzt bearbeitet von einem Moderator:

Ähnliche Themen

M
sporadisch HD+ freezer mit OScam und DM7020HD
2
Antworten
19
Aufrufe
3K
filius00
filius00
Shorda
OSCAM / CCCAM - UM 02 keine HD Sender der Pro7/Sat.1 und RTL Gruppe zwecks CAK6 pairing
2
Antworten
28
Aufrufe
8K
Shorda
Shorda
N
HD+ Kanäle für oscam sperren
Antworten
6
Aufrufe
2K
Nuvolari360
N
B
Fritzbox Talk Wenn man mal keinen Durchblick mehr hat: FB 7390 mit Easymouse und Pairing entfernen
2
Antworten
20
Aufrufe
3K
HarryHase
HarryHase
D
FritzBox von 7170 auf 3390
2
Antworten
15
Aufrufe
3K
dr-kill
D
Zurück
Oben