Oscam Only ....

[meister85]

AW: Oscam Only ....

prova a fare quello che ti ho detto! prima facciamo caminare la sky italia e poi guardiamo per la tivusat!

togli la sceda dell slot interno e metti le configs che ti ho detto.

una domanda, la oscam l´hai scaricata dal panel?

 

[TriplexXx3]

AW: Oscam Only ....

Qui un nuovo logg attuale dopo aver controllatto nuovamente tutto

9:59:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5965 (mips-tuxbox-linux)

9:59:02 0 s version=1.20-unstable_svn, build #5965, system=mips-tuxbox-linux, nice=-1
9:59:02 0 s client max. idle=120 sec, debug level=0
9:59:02 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
9:59:02 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
9:59:02 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0

WARNING: value 'smartreader+' in protocol-line not recognized, assuming MOUSE
Warning: keyword 'device_out_endpoint' in reader section not recognized
9:59:02 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
9:59:02 0 s signal handling initialized (type=sysv)
9:59:02 0 s 446 service-id's loaded in 17ms
9:59:02 0 s 37 tier-id's loaded

9:59:02 0 s 1000 provid's loaded
9:59:02 0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
9:59:02 0 s monitor: disabled
9:59:02 0 s camd35: disabled
9:59:02 0 s cs378x: disabled
9:59:02 0 s newcamd: disabled
9:59:02 0 s cccam: Bind request failed, waiting another 119 seconds

9:59:03 0 s cccam: Bind request failed, waiting another 118 seconds

9:59:04 0 s cccam: Bind request failed, waiting another 117 seconds

9:59:05 0 s cccam: Bind request failed, waiting another 116 seconds

9:59:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5965 (mips-tuxbox-linux)

9:59:02 0 s version=1.20-unstable_svn, build #5965, system=mips-tuxbox-linux, nice=-1
9:59:02 0 s client max. idle=120 sec, debug level=0
9:59:02 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
9:59:02 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
9:59:02 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0

WARNING: value 'smartreader+' in protocol-line not recognized, assuming MOUSE
Warning: keyword 'device_out_endpoint' in reader section not recognized
9:59:02 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
9:59:02 0 s signal handling initialized (type=sysv)
9:59:02 0 s 446 service-id's loaded in 17ms
9:59:02 0 s 37 tier-id's loaded

9:59:02 0 s 1000 provid's loaded
9:59:02 0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
9:59:02 0 s monitor: disabled
9:59:02 0 s camd35: disabled
9:59:02 0 s cs378x: disabled
9:59:02 0 s newcamd: disabled
9:59:02 0 s cccam: Bind request failed, waiting another 119 seconds

9:59:03 0 s cccam: Bind request failed, waiting another 118 seconds

9:59:04 0 s cccam: Bind request failed, waiting another 117 seconds

9:59:05 0 s cccam: Bind request failed, waiting another 116 seconds

 

[meister85]

AW: Oscam Only ....

devi prendere le configs che ti ho detto!!!

WARNING: value 'smartreader+' in protocol-line not recognized, assuming MOUSE

hai ancora smartreader nell protocoll e io questo non te lo scritto!

 

[TriplexXx3]

questo su webif se puo aiutare ---

Spoiler

2011/10/04 9:57:08 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5965 (mips-tuxbox-linux)
2011/10/04 9:57:08 0 s version=1.20-unstable_svn, build #5965, system=mips-tuxbox-linux, nice=-1
2011/10/04 9:57:08 0 s client max. idle=120 sec, debug level=0
2011/10/04 9:57:08 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2011/10/04 9:57:08 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2011/10/04 9:57:08 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0
2011/10/04 9:57:08 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2011/10/04 9:57:08 0 s signal handling initialized (type=sysv)
2011/10/04 9:57:08 0 s 446 service-id's loaded in 54ms
2011/10/04 9:57:08 0 s 37 tier-id's loaded
2011/10/04 9:57:08 0 s 1000 provid's loaded
2011/10/04 9:57:08 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/10/04 9:57:08 0 s monitor: disabled
2011/10/04 9:57:08 0 s camd35: disabled
2011/10/04 9:57:08 0 s cs378x: disabled
2011/10/04 9:57:08 0 s newcamd: disabled
2011/10/04 9:57:08 0 s cccam: initialized (fd=4, port=12000, crypted)
2011/10/04 9:57:08 0 s radegast: disabled
2011/10/04 9:57:08 0 s http thread started
2011/10/04 9:57:08 0 s reader check thread started
2011/10/04 9:57:08 0 s check thread started
2011/10/04 9:57:08 0 s creating thread for device /dev/ttyUSB0
2011/10/04 9:57:08 0 s creating thread for device /dev/sci0
2011/10/04 9:57:08 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/10/04 9:57:08 0 s waiting for local card init
2011/10/04 9:57:08 58A2E0 h HTTP Server listening on port 34001
2011/10/04 9:57:08 588AF0 r reader mm_tivusat initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2011/10/04 9:57:09 0 mm_tivusat card detected
2011/10/04 9:57:10 587300 r reader mm_skyitalia initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2011/10/04 9:57:11 588AF0 r ATR: 3F ............................ 64
2011/10/04 9:57:11 0 mm_skyitalia card detected
2011/10/04 9:57:12 588AF0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/10/04 9:57:13 588AF0 r detect nagra tiger card
2011/10/04 9:57:13 588AF0 r card system not supported
2011/10/04 9:57:13 588AF0 r Normal mode failed, reverting to Deprecated Mode
2011/10/04 9:57:15 588AF0 r ATR: 3F ....................................... 64
2011/10/04 9:57:16 588AF0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/10/04 9:57:17 588AF0 r detect nagra tiger card
2011/10/04 9:57:21 588AF0 r card system not supported
2011/10/04 9:57:21 588AF0 r card initializing error
2011/10/04 9:57:21 587300 r Error activating card.
2011/10/04 9:57:32 587300 r Error activating card.
2011/10/04 9:57:43 587300 r Error activating card.

La Oscam si dall Panello ma non partiva ed lo sostituita con una recente che parte ...

Devo togliere la tivusat dallo slot interno giusto?

Zitat: hai ancora smartreader nell protocoll e io questo non te lo scritto
Riguardo ha questo cosa dovrei fare?

 

[meister85]

AW: Oscam Only ....

allora prima togli la sceda dell slot interno poi prendi le configs che ti ho postato e poi fai ripartire la oscam.

 

[TriplexXx3]

AW: Oscam Only ....

Si ho anche le tue config ... grazie per la pazienza .... volevo solo agiungere che sono fuori dalla materia da due anni ma non sono scemo ...

 

[meister85]

AW: Oscam Only ....

non ti preoccupare io sono qui per aiutare la gente pero fammi un piacere e fai quello che ti scrivo altrimenti non ce la facciamo a risolvere

ps. cancella la oscam.services

 

[TriplexXx3]

AW: Oscam Only ....

Eseguito ...

 

[meister85]

AW: Oscam Only ....

che ti dice il log? funziona la sky italia?

 

[TriplexXx3]

AW: Oscam Only ....

pultroppo no...

il logg...

Spoiler

10:30:21 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5965 (mips-tuxbox-linux)

10:30:21 0 s version=1.20-unstable_svn, build #5965, system=mips-tuxbox-linux, nice=-1
10:30:21 0 s client max. idle=120 sec, debug level=0
10:30:21 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
10:30:21 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms

10:30:21 0 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
WARNING: value 'smartreader+' in protocol-line not recognized, assuming MOUSE
Warning: keyword 'device_out_endpoint' in reader section not recognized
10:30:21 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
10:30:21 0 s signal handling initialized (type=sysv)
10:30:22 0 s 446 service-id's loaded in 18ms
10:30:22 0 s 37 tier-id's loaded

10:30:22 0 s 1000 provid's loaded
10:30:22 0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
10:30:22 0 s monitor: disabled
10:30:22 0 s camd35: disabled
10:30:22 0 s cs378x: disabled
10:30:22 0 s newcamd: disabled
10:30:22 0 s cccam: Bind request failed, waiting another 119 seconds

10:30:23 0 s cccam: Bind request failed, waiting another 118 seconds
10:32:19 0 s cccam: Bind request failed, waiting another 2 seconds

10:32:20 0 s cccam: Bind request failed, waiting another 1 seconds

10:32:21 0 s cccam: Bind request failed, giving up
10:32:21 0 s radegast: disabled
10:32:21 0 s http thread started
10:32:21 0 s reader check thread started
10:32:21 0 s check thread started
10:32:21 0 s creating thread for device /dev/ttyUSB0
10:32:21 0 s creating thread for device /dev/sci0
10:32:21 0 s loadbalancer: can't read from file /tmp/.oscam/stat
10:32:21 0 s waiting for local card init

10:32:21 5897A0 h HTTP Server couldn't bind on port 34001 (errno=125 Address already in use). Not starting HTTP!
10:32:21 587FB0 r ERROR opening device /dev/sci0

10:32:21 587FB0 r Cannot open device: /dev/sci0

10:32:23 5867C0 r reader mm_skyitalia initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)

10:32:24 0 mm_skyitalia card detected

10:32:34 5867C0 r Error activating card.

10:32:45 5867C0 r Error activating card.

10:32:56 5867C0 r Error activating card.

10:33:21 587FB0 r ERROR opening device /dev/sci0
10:33:21 587FB0 r Cannot open device: /dev/sci0

 

[meister85]

AW: Oscam Only ....

le configs che ti ho postato NON l´hai presi! lo vedo nel log!!!!

10:32:21 0 s creating thread for device /dev/sci0
10:32:23 5867C0 r reader mm_skyitalia initialized

 

[TriplexXx3]

AW: Oscam Only ....

Scusa ... guarda tu stessso

ecco #

[global]
logfile = stdout
fallbacktimeout = 2000
cachedelay = 120
nice = -1
maxlogsize = 512
preferlocalcards = 1
saveinithistory = 1

[cccam]
port = 12000
reshare = 1
ignorereshare = 0
version = 2.2.1
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 1
reshare_mode = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapi

[webif]
httpport = 34001
httphelplang = it
httpuser = dreambox
httppwd = root
httpallowed = 192.168.178.27
httphideidleclients = 1

 

[meister85]

AW: Oscam Only ....

forse mi sono spiegato male, con le configs dico tutto non solo la oscam.conf! devi prende la oscam.user, oscam.server e oscam.conf.! la oscam.services la devi cancellare!

le configs (oscam.user, oscam.server e oscam.conf) prendi questi:

https://www.digital-eliteboard.com/threads/163600&p=1224738&viewfull=1#post1224738

 

[TriplexXx3]

AW: Oscam Only ....

Messo tutto cio come nell link anche cambiato smartreader....

qui il log

Spoiler

10:58:44 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5965 (mips-tuxbox-linux)

10:58:44 0 s version=1.20-unstable_svn, build #5965, system=mips-tuxbox-linux, nice=-1
10:58:44 0 s client max. idle=120 sec, debug level=0
10:58:44 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
10:58:44 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms

10:58:44 0 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
10:58:44 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
10:58:44 0 s signal handling initialized (type=sysv)
10:58:44 0 s 446 service-id's loaded in 17ms
10:58:44 0 s 37 tier-id's loaded

10:58:44 0 s 1000 provid's loaded
10:58:44 0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
10:58:44 0 s monitor: disabled
10:58:44 0 s camd35: disabled
10:58:44 0 s cs378x: disabled
10:58:44 0 s newcamd: disabled
10:58:44 0 s cccam: Bind request failed, waiting another 119 seconds

10:58:45 0 s cccam: Bind request failed, waiting another 118 seconds
11:00:42 0 s cccam: Bind request failed, waiting another 1 seconds

11:00:43 0 s cccam: Bind request failed, giving up
11:00:43 0 s radegast: disabled
11:00:43 0 s http thread started
11:00:43 0 s reader check thread started
11:00:43 0 s check thread started
11:00:43 0 s creating thread for device /dev/ttyUSB0
11:00:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
11:00:43 0 s waiting for local card init

11:00:43 5836E0 h HTTP Server couldn't bind on port 40000 (errno=125 Address already in use). Not starting HTTP!
11:00:43 581EF0 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
11:00:43 581EF0 r recompile with SmartReader support.
11:00:43 581EF0 r Cannot open device: /dev/ttyUSB0

11:01:43 581EF0 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
11:01:43 581EF0 r recompile with SmartReader support.
11:01:43 581EF0 r Cannot open device: /dev/ttyUSB0

11:02:43 581EF0 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
11:02:43 581EF0 r recompile with SmartReader support.
11:02:43 581EF0 r Cannot open device: /dev/ttyUSB0

11:03:43 581EF0 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
11:03:43 581EF0 r recompile with SmartReader support.
11:03:43 581EF0 r Cannot open device: /dev/ttyUSB0

 

[meister85]

AW: Oscam Only ....

il oscam.server lo devi mettere cosi:

[reader]
label = skyitalia
protocol = mouse
device = /dev/ttyUSB0
caid = 093b
boxid = 000000 ---> qui ci devi mettere il tuo boxid
detect = cd
cardmhz = 357
ident = 093b:000000
group = 1
emmcache = 1,3,2