Oscam only mit D02

[steifhahn]

Hallo Forum,

ich will auf Oscam only umsteigen.

habe mir mit dem Config Creator einen RSA und Boykey erstellt.
Aber im Oscam log kommt immer nur folgendes:

2011/11/05 16:19:01 B73F9B70 s creating thread for device /dev/ttyUSB0 
2011/11/05 16:19:01 B73F9B70 h HTTP Server listening on port 16002
2011/11/05 16:19:01 B73F9B70 r reader thread started (thread=B73F9B70, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/11/05 16:19:01 B74536C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/11/05 16:19:01 B74536C0 s waiting for local card init
2011/11/05 16:19:04 B73F9B70 r sky card detected
2011/11/05 16:19:08 B73F9B70 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D 2011/11/05 16:19:09 B73F9B70 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2011/11/05 16:19:10 B73F9B70 r detect irdeto tunneled nagra card
2011/11/05 16:19:10 B73F9B70 r rsa key configured -> using nagra mode
2011/11/05 16:19:16 B73F9B70 r detect irdeto card
2011/11/05 16:19:25 B73F9B70 r card system not supported
2011/11/05 16:19:25 B73F9B70 r Normal mode failed, reverting to Deprecated Mode
2011/11/05 16:19:30 B73F9B70 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D 
2011/11/05 16:19:31 B73F9B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2011/11/05 16:19:32 B73F9B70 r detect irdeto tunneled nagra card
2011/11/05 16:19:32 B73F9B70 r rsa key configured -> using nagra mode
2011/11/05 16:19:38 B73F9B70 r detect irdeto card
2011/11/05 16:19:47 B73F9B70 r card system not supported
2011/11/05 16:19:47 B73F9B70 r card initializing error
2011/11/05 16:19:48 B74536C0 s init for all local cards done
2011/11/05 16:19:48 B74536C0 s anti cascading disabled

oscam.server:

[reader]
label          = sky
protocol     = mouse
device         = /dev/ttyUSB0
services     = skyall,skyhdlokal,!skyselectcaid          
caid = 1722,1834
rsakey       = 8xxxx1
boxkey          = 6xxxxB
ecmwhitelist = 93,89
detect          = cd
mhz          = 600
cardmhz      = 600
group          = 1
emmcache      = 1,3,2
blockemm-unknown = 1

oscam.conf:

[global]
logfile = /tmp/oscam.log
failbantime = 30
failbancount = 3
cachedelay = 20
bindwait = 60
unlockparental = 1
nice = -1
maxlogsize = 5000

[monitor]
appendchaninfo = 1

[cccam]
port = 12000
reshare = 1
version = 2.1.4 
stealth = 1
reshare_mode = 0

Kann jemand einen Fehler entdecken?

mfg S

 

[GTD Bastion]

AW: Oscam only mit D02

Du brauchst für die D02 keinen RSA und Boxkey.
Bau den Reader mal um:

Spoiler

[reader] 
label = sky 
protocol = mouse 
device = /dev/ttyUSB0 
services = skyall,skyhdlokal,!skyselect
caid = 1722,1834 
ecmwhitelist = 1722:93;1834:89 
detect = cd 
mhz = 600 
cardmhz = 600 
group = 1 
emmcache = 1,3,2 
blockemm-unknown = 1

 

[steifhahn]

AW: Oscam only mit D02

Hab vielleicht vergessen zu erwähnen, dass die Karte im Smargo auf Debian laufen soll.

Jedenfalls bringt deine Änderung nicht den gehofften Erfolg.

 

[GTD Bastion]

AW: Oscam only mit D02

Dann mach über Webif noch Smargopatch und Deprecated an...Oscam neustarten und testen^^

 

[steifhahn]

Ich hab den Smargo auf 1.5 geupdatet und jetzt erkennt er die Karte

Man mir raucht der Kopf....

Auf der D02 ist nur Sky mit HD gebucht.

Wenn mir jetzt noch jemand das Chaos in der oscam.services, oscam.user und oscam.server grade biegen könnte und es dann auch endlich mal läuft, wäre ich überglücklich.

hier die configs:

oscam.user

[account]
user                          = monitor
pwd                           = monitor
monlevel                      = 4

[account]
user                          = xxx 
pwd                           = xxx 
group                         = 1
uniq                          = 1
au                            = 1
services                      = KabelDeutschland-HD-mapping,kddigifree,kdhome,kd_home_hd,kdhomesd,skyall,skyhdlokal,skyselect
betatunnel=1834.FFFF:1722
ident = 1834:000000
cccmaxhops                    = 0

oscam.server:

[reader]
label                         = sky
protocol                      = mouse
device                        = /dev/ttyUSB1
services                      = skyall,skyhdlokal,skyselect,kddigifree,kdhome,kdhome,kd_home_hd,kdhomesd,kabelDeutschland-HD-mapping 
caid                          = 1722,1834
rsakey          = xxxx
boxkey                        = xxB 
ecmwhitelist                  = 93,89  
detect                        = cd
mhz                           = 600
cardmhz                       = 600
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
deprecated                    = 1

oscam.services

[KabelDeutschland-HD-mapping] 
caid = 1722,1834 
provid = 000000 
srvid = 0000,006F,0070,0071,0072,0081,0082,0083,0084,C351, C352,C353,C354,C355,C356,C357,C358,C359,C362,C363, C365,C35A,C35F,C364,C366,C35B,C35C,C35D 

[kddigifree]
caid = 1722
provid = 000000
srvid = C3BE,D177,D16E,CF77,D04A,D16C,CF09,D09B,CF0C,C761,D10A,C616,D16D,D168,D165,CF76,D171,C75F,D10B,D179,CFDB,D167,CF12,D10D,D10E,D17E,D172,D047,D173,CF17,D176,CF0D,D166,D17B,CF0E,C3B5,D03A,D175,D170,D163,D161,D04D,CF7F,D17A,D174,C60C,D049,D16F,D178,D162,CF0A,C353,C354,CFE3,CF0F,D169,D164,CFE1,CFE0,CF71,CF7A,CF79,CF7B,CFDF,CFE2

[kdhome]
#inkl. Radio!
caid = 1722
provid = 000000
srvid = D03E,C480,D036,D09C,C617,C615,C483,C3B8,C482,C3BF,D035,CF70,D0A4,C3BC,C613,C60F,C60D,C610,C611,CF73,D0A5,D0A3,C481,D099,D16B,C619,C3B7,C47E,C3BD,C4E2,C4E4,C4E8,C4E4,C49A,C419,C41A,C41C,C41E,C41F,C420,C423,C424,C425,C427,C42B,C42D,C42E,C42F,C430,C432,C433,C437,C438,C439,C43A,C43B,C43C,C43F,C441,C442,C443,C445,C446,C447

[kdhomesd]
caid = 1722
provid = 000000
srvid = C614,C618,C47F,C47D,D0A1,C3BA,C3B9,C3BB 

[skyall]
#inkl. Sky komplett mit Bulli aber ohne HD!
caid = 1722
provid = 000000
srvid = 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0022,0024,002A,0032,0034,00A8,0201,0206,0019,0008,0009,000A,000B,000C,000D,000E,0010,0011,0012,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0021,0022,0023,0024,0025,0026,0027,0029,002A,002B,0032,0034,0035,0037,0038,0039,003A,003C,003D,003E,003F,0040,0041,0042,0043,0044,007D,0096,0097,0098,0099,009A,009B,009C,00A8,00DD,00DE,00DF,00FC,00FD,0106,0107,0110,0111,011A,011B,0124,0125,012E,012F,0138,0139,0142,0143,014C,014D,0156,0160,016B,0175,0201,0203,0204,0206,07FF,2EFE,3331,4461,4462,7001,700A,0077,0072,006A,006B,006F,0081,0083,003B,00FC,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160

[skyselect]
caid = 1722,1834
#inkl. Blue Movie etc.
provid = 000000
srvid = 0012,0078,0079,007A,00FB,00FE,0105,0108,010F,0119,0123,012D,0137,0141,014B,0201,0159,0163,016D,0096,0097,0098,0099,009A,009B,009C,0045,0046,003B

Hier noch das log:

[nagra-reader] ready for requests 
2011/11/05 18:56:52 B74116C0 s init for all local cards done 
2011/11/05 18:56:52 B74116C0 s anti cascading disabled 
2011/11/05 18:56:59 B7387B70 c encrypted cccam-client 192.168.2.5 granted (xxx, au=auto (1 reader))

Wenn ich das ident = 1834:000000 weg lasse, steht folgendes im Log:

2011/11/05 19:01:25 B742BB70 c encrypted cccam-client 192.168.2.5 granted (user_zee, au=auto (1 reader)) 
2011/11/05 19:01:28 B742BB70 c xxx (1722&000000/000A/93:C62E): rejected group (20 ms) (of 0 avail 0) - Sky_Cinema (no matching reader) 
2011/11/05 19:01:28 B742BB70 c xxx (1722&000000/000A/93:4169): rejected group (20 ms) (of 0 avail 0) - Sky_Cinema (no matching reader)  
2011/11/05 19:01:35 B742BB70 c xxx (1722&000000/000A/93:A39D): rejected group (20 ms) (of 0 avail 0) - Sky_Cinema (no matching reader) 
2011/11/05 19:01:37 B742BB70 c xxx (1722&000000/000A/93:FE79): rejected group (20 ms) (of 0 avail 0) - Sky_Cinema (no matching reader)  
2011/11/05 19:01:44 B742BB70 c xxx (1722&000000/0083/93:A631): rejected group (20 ms) (of 0 avail 0) - Sky_Cinema_HD (no matching reader)  
2011/11/05 19:01:52 B742BB70 c xxx (1722&000000/0083/93:C7FF): rejected group (20 ms) (of 0 avail 0) - Sky_Cinema_HD (no matching reader)

Bitt um Unterstützung!

 

[GTD Bastion]

AW: Oscam only mit D02

Bitte keinen RSA Key mehr posten!

Du schaust jetzt bitte mal hier rein:
[h=3]HowTo Debian / Ubuntu - OScam - D02 - D09[/h]