Oscam für HD02 + V13

[dodo83]

AW: Oscam für HD02 + V13

musst du nicht,
bei aktiviertem AUTOSPEED wird der MHZ Wert selber geregelt,
bei deaktiviertem musst DU den passenden Wert eintragen, einfach mal testen wie es besser läuft

 

[thronis]

AW: Oscam für HD02 + V13

ok dann lass ich es erst einmal auf 1 und schaue was passiert.
bzw. wenn ich ihn auf 0 setze wie finde ich heraus, welchen mhz wert ich eingeben muss...
oh man bis auf die softcams komm ich mit dem receiver ja schon gut klar, aber das übersteigt irgendwie meinen horizont...

Sollte dann sonst erst einmal alles ok sein mit den Angaben?
Dann würde ich es später einmal testen und schauen wie es läuft und ob überhaupt

also habe die geänderten daten ausprobiert.
Leider wird keine der beiden Karten hell.

 

[webman2]

AW: Oscam für HD02 + V13

Poste nochmal jetzt alle Oscam Dateien vollständig. Du hast zweimal services = ... in der oscam.server.

Warum hälst Du Dich denn nicht an meine Beispielkonfigs ?

 

[4gx35]

AW: Oscam für HD02 + V13

da du mhz = 1 hattest, muss zwingend autospeed = 1 gesetzt werden,
das hatte ich oben zusätzlich vergessen zu schreiben,
grundsätzlich funktioniert autospeed bei der dream besten,
ergibt mhz 450 für v13/14 und 540 für hd+

log vom oscam start an posten, evtl. sind die karten ja auch nicht mehr aktiv

 

[thronis]

AW: Oscam für HD02 + V13

Also so sehen die files jetzt aus über die wir hier geschrieben haben.
sry wenn ich schon ein wenig nerve, aber wie schon erwähnt verstehe das noch nicht so gut.
obwohl ich heute schon einiges gelernt habe, ich hoffe ihr seit nachsichtig

also die karten funktionieren, definitiv. mit cccam ist alles hell.

Spoiler

oscam.conf
[global]
disablelog = 1
logfile = /tmp/.oscam/oscam.log
logduplicatelines = 1
clienttimeout = 5000
unlockparental = 1
nice = -1
maxlogsize = 128
waitforcards = 0
dropdups = 1
block_same_ip = 0
lb_mode = 1
lb_save = 500
lb_min_ecmcount = 3
lb_savepath = /tmp/.oscam/oscam.stat
ecmfmt = c:s #l
failbantime = 15
failbancount = 3
suppresscmd08 = 1

[dvbapi]
enabled = 1
au = 1
user = mybox
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = 83
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.1-10.255.255.255

Spoiler

oscam.dvbapi
P: 1843
P: 09C4

Spoiler

oscam.services
[hdplus]
caid = 09C4
srvid = EF11,157F,EF10,EF15,EF75,EF74,EF76,EF14,2EAF,2E9B,157C,2777,5274,1581,2774,30D4,EF78,5273,EF77,151A,1519,126E,126F,0002

Spoiler

oscam.server
[reader]
label = v13
protocol = internal
device = /dev/sci0
services = sky_v13
caid = 09C4
ident = 09C4:000000
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,15,0
services = !hdplus
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
read_old_classes = 0
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = HD02
description = HD+schwarz
protocol = internal
device = /dev/sci1
services = hd02
caid = 1843
ident = 1843:000000
rsakey = BF...D5
boxkey = A7..7C
detect = cd
mhz = 1
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,1,2

 

[dodo83]

AW: Oscam für HD02 + V13

bitte SPOILERN: https://www.digital-eliteboard.com/announcement.php?f=2045&a=125

werden die Karten eingelesen? CARDOK im WebIF?
poste bitte log ab start der OScam, im SPOILER

 

[webman2]

AW: Oscam für HD02 + V13

Oscam.server anpassen...

Spoiler

oscam.server
[reader]
label = v13
protocol = internal
device = /dev/sci0
services = sky_v13 -> löschen
caid = 09C4
ident = 09C4:000000
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,15,0
services = !hdplus
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
read_old_classes = 0
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = HD02
description = HD+schwarz
protocol = internal
device = /dev/sci1
services = hd02 -> löschen
caid = 1843
ident = 1843:000000
rsakey = BF...D5
boxkey = A7..7C
detect = cd
mhz = 1
cardmhz = 2700
autospeed = 1
group = 2
emmcache = 1,1,2

Deine oscam.user hast Du nicht gepostet.

 

[thronis]

AW: Oscam für HD02 + V13

so habe das mal nach deiner Anleitung versucht... klappt leider auch nicht, aber dafür habe ich jetzt wieder was dazu gelernt^^

hier erstmal das log.

Spoiler

>> OSCam << cardserver started at Wed Dec 23 22:26:12 2015
-------------------------------------------------------------------------------
2015/12/23 22:26:12 0 s >> OSCam << cardserver started, version 1.20-unstable_emu, build r9450 (mipsel-unknown-linux-gnu)
2015/12/23 22:26:12 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8574
2015/12/23 22:26:12 0 s services reloaded: 0 services freed, 22 services loaded, rejected 0
2015/12/23 22:26:12 0 s userdb reloaded: 4 accounts loaded, 0 expired, 3 disabled
2015/12/23 22:26:12 0 s signal handling initialized
2015/12/23 22:26:12 0 s 486 service-id's loaded in 16ms
2015/12/23 22:26:12 0 s 31 tier-id's loaded
2015/12/23 22:26:12 0 s cccam: initialized (fd=5, port=33333)
2015/12/23 22:26:12 0 s hd02 [internal] creating thread for device /dev/sci0
2015/12/23 22:26:12 0 s v13unten [internal] creating thread for device /dev/sci1
2015/12/23 22:26:12 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/12/23 22:26:12 0 s waiting for local card init
2015/12/23 22:26:12 5E73E8 r v13unten [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2015/12/23 22:26:12 5E5718 r hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz
2015/12/23 22:26:12 76C00468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/12/23 22:26:12 76C00468 h HTTP Server running. ip=0.0.0.0 port=17000

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Dec 23 22:26:53 2015
-------------------------------------------------------------------------------
2015/12/23 22:26:53 0 s >> OSCam << cardserver started, version 1.20-unstable_emu, build r9450 (mipsel-unknown-linux-gnu)
2015/12/23 22:26:53 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8670
2015/12/23 22:26:53 0 s services reloaded: 0 services freed, 22 services loaded, rejected 0
2015/12/23 22:26:53 0 s userdb reloaded: 4 accounts loaded, 0 expired, 3 disabled
2015/12/23 22:26:53 0 s signal handling initialized
2015/12/23 22:26:53 0 s 486 service-id's loaded in 13ms
2015/12/23 22:26:53 0 s 31 tier-id's loaded
2015/12/23 22:26:53 0 s cccam: initialized (fd=5, port=33333)
2015/12/23 22:26:53 0 s hd02 [internal] creating thread for device /dev/sci0
2015/12/23 22:26:53 0 s v13unten [internal] creating thread for device /dev/sci1
2015/12/23 22:26:53 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/12/23 22:26:53 0 s waiting for local card init
2015/12/23 22:26:53 B813E8 r v13unten [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2015/12/23 22:26:53 B7F718 r hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz
2015/12/23 22:26:53 77500468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/12/23 22:26:53 77500468 h HTTP Server running. ip=0.0.0.0 port=17000

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Dec 23 22:28:22 2015
-------------------------------------------------------------------------------
2015/12/23 22:28:22 0 s >> OSCam << cardserver started, version 1.20-unstable_emu, build r9450 (mipsel-unknown-linux-gnu)
2015/12/23 22:28:22 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8801
2015/12/23 22:28:22 0 s services reloaded: 0 services freed, 22 services loaded, rejected 0
2015/12/23 22:28:22 0 s userdb reloaded: 4 accounts loaded, 0 expired, 3 disabled
2015/12/23 22:28:22 0 s signal handling initialized
2015/12/23 22:28:22 0 s 486 service-id's loaded in 17ms
2015/12/23 22:28:22 0 s 31 tier-id's loaded
2015/12/23 22:28:22 0 s cccam: initialized (fd=5, port=33333)
2015/12/23 22:28:22 0 s hd02 [internal] creating thread for device /dev/sci0
2015/12/23 22:28:22 0 s v13unten [internal] creating thread for device /dev/sci1
2015/12/23 22:28:22 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/12/23 22:28:22 0 s waiting for local card init
2015/12/23 22:28:22 9983E8 r v13unten [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2015/12/23 22:28:22 996718 r hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz
2015/12/23 22:28:22 76F00468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/12/23 22:28:22 76F00468 h HTTP Server running. ip=0.0.0.0 port=17000
2015/12/23 22:28:23 9983E8 r v13unten [internal] card detected
2015/12/23 22:28:24 996718 r hd02 [internal] card detected
2015/12/23 22:28:24 9983E8 r v13unten [internal] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2015/12/23 22:28:24 9983E8 r v13unten [internal] Init card protocol T0, FI=1, F=372, D=16, N=3
2015/12/23 22:28:24 9983E8 r v13unten [internal] TEST tempo mhz check = 500 mhz
2015/12/23 22:28:24 9983E8 r v13unten [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/12/23 22:28:24 9983E8 r v13unten [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/12/23 22:28:25 996718 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/12/23 22:28:25 996718 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/12/23 22:28:25 996718 r hd02 [internal] TEST tempo mhz check = 500 mhz
2015/12/23 22:28:25 996718 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/12/23 22:28:25 996718 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2015/12/23 22:28:25 996718 r hd02 [internal] Card responded ok for ifsd request of 160
2015/12/23 22:28:25 9983E8 r v13unten [internal] Card type: P1GV
2015/12/23 22:28:25 9983E8 r v13unten [internal] Rom version: 10A7
2015/12/23 22:28:26 9983E8 r v13unten [internal] parental lock setting: FF FF FF FF
2015/12/23 22:28:26 9983E8 r v13unten [internal] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2015/12/23 22:28:26 9983E8 r v13unten [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/12/23 22:28:26 9983E8 r v13unten [internal] ready for requests
2015/12/23 22:28:26 9983E8 r v13unten [internal] found card system videoguard2
2015/12/23 22:28:26 9983E8 r v13unten [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2015/12/23 22:28:26 9983E8 r v13unten [videoguard2] card detected
2015/12/23 22:28:26 9983E8 r v13unten [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2015/12/23 22:28:26 9983E8 r v13unten [videoguard2] tier: fba6, expiry date: 2014/03/12-00:01:48
2015/12/23 22:28:26 9983E8 r v13unten [videoguard2] tier: fce7, expiry date: 2014/03/16-00:01:48
2015/12/23 22:28:26 9983E8 r v13unten [videoguard2] tier: fb39, expiry date: 2013/04/12-01:01:48
2015/12/23 22:28:26 9983E8 r v13unten [videoguard2] tier: fa13, expiry date: 2013/04/09-01:01:48
2015/12/23 22:28:26 996718 r hd02 [internal] detect native nagra card
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0056, expiry date: 2016/02/18-00:01:00 Sky 3D Welt
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0057, expiry date: 2016/02/18-00:01:00 Sky 3D Film
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0058, expiry date: 2016/02/18-00:01:00 Sky 3D Sport
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0065, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0066, expiry date: 2016/02/18-00:01:00 Sky HD Bundesliga Fanzone
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0067, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0068, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0069, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 006a, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 006b, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 006c, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 006d, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 006e, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 006f, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0070, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0071, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0072, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0073, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0075, expiry date: 2016/02/18-00:01:00
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 007b, expiry date: 2016/02/18-00:01:00 Sky AT/DE / 19.2E / de
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 007d, expiry date: 2016/02/18-00:01:00 Sky Sport SD
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 0081, expiry date: 2016/02/18-00:01:00 Sky Bundesliga SD
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 008e, expiry date: 2016/02/18-00:01:00 Beate-Uhse.tv
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00c0, expiry date: 2016/02/18-00:01:00 Sky Welt Extra
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00c7, expiry date: 2016/02/18-00:01:00 Sky Welt SD
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00c8, expiry date: 2016/02/18-00:01:00 Sky Film SD
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00c9, expiry date: 2016/02/18-00:01:00 Sky Welt HD
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00ca, expiry date: 2016/02/18-00:01:00 Sky Film HD
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00d4, expiry date: 2016/02/18-00:01:00 HD+ (Abo)
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00e4, expiry date: 2016/02/18-00:01:00 Sky Bundesliga HD
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00e5, expiry date: 2016/02/18-00:01:00 Sky Sport HD
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00f3, expiry date: 2016/02/18-00:01:00 Sky Blue Movie (Info, 1-3)
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00fa, expiry date: 2016/02/18-00:01:00 Sky Blue Movie HD
2015/12/23 22:28:27 9983E8 r v13unten [videoguard2] tier: 00ff, expiry date: 2016/02/18-00:01:00 Sky AT/DE / 19.2E / de
2015/12/23 22:28:27 996718 r hd02 [internal] found card system nagra
2015/12/23 22:28:27 996718 r hd02 [nagra] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2015/12/23 22:28:27 996718 r hd02 [nagra] ROM: D N A S P 1 8 0
2015/12/23 22:28:27 996718 r hd02 [nagra] REV: M e r 0 0 0
2015/12/23 22:28:27 996718 r hd02 [nagra] SER: ############
2015/12/23 22:28:27 996718 r hd02 [nagra] CAID: 1843
2015/12/23 22:28:27 996718 r hd02 [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/12/23 22:28:27 996718 r hd02 [nagra] Prv.ID: 00 00 00 00
2015/12/23 22:28:28 996718 r hd02 [nagra] IRD ID: ############
2015/12/23 22:28:28 996718 r hd02 [nagra] active to: 2016/02/13 11:59
2015/12/23 22:28:28 996718 r hd02 [nagra] -----------------------------------------
2015/12/23 22:28:28 996718 r hd02 [nagra] |id |tier |valid from |valid to |
2015/12/23 22:28:28 996718 r hd02 [nagra] +----+--------+------------+------------+
2015/12/23 22:28:28 996718 r hd02 [nagra] |8011|0066 |2013/05/20 |2014/05/21 |
2015/12/23 22:28:28 996718 r hd02 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2015/12/23 22:28:28 996718 r hd02 [nagra] |8011|0BEA |2015/12/17 |2017/01/21 |
2015/12/23 22:28:28 996718 r hd02 [nagra] -----------------------------------------
2015/12/23 22:28:28 996718 r hd02 [nagra] ready for requests
2015/12/23 22:28:29 0 s init for all local cards done
2015/12/23 22:28:29 9BFBE8 c plain dvbapi-client granted (serverbox, au=auto (7 reader))
2015/12/23 22:28:29 9BFBE8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/12/23 22:28:32 9BFBE8 c [DVBAPI] Receiver sends PMT command 3 for channel EF74
2015/12/23 22:28:32 9BFBE8 c [DVBAPI] Receiver wants to demux srvid EF74 on adapter 0000 camask 0001 index 0000 pmtpid 0060
2015/12/23 22:28:32 9BFBE8 c [ADD PID 0] CAID: 1830 ECM_PID: 1CEA PROVID: 000000
2015/12/23 22:28:32 9BFBE8 c [ADD PID 1] CAID: 1843 ECM_PID: 19EA PROVID: 000000
2015/12/23 22:28:32 9BFBE8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BEA PROVID: 000000
2015/12/23 22:28:32 9BFBE8 c [ADD PID 3] CAID: 098C ECM_PID: 1AEA PROVID: 000000
2015/12/23 22:28:32 9BFBE8 c [ADD PID 4] CAID: 1860 ECM_PID: 1EEA PROVID: 000000
2015/12/23 22:28:32 9BFBE8 c [ADD PID 5] CAID: 186A ECM_PID: 1DEA PROVID: 000000
2015/12/23 22:28:32 9BFBE8 c Found 6 ECMpids and 6 STREAMpids in PMT
2015/12/23 22:28:32 9BFBE8 c [DVBAPI] Receiver wants to demux srvid EF74 on adapter 0000 camask 0001 index 0000 pmtpid 0060
2015/12/23 22:28:32 9BFBE8 c New program number: EF74 (Sat.1 HD) [pmt_list_management 3]
2015/12/23 22:28:32 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:32 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:33 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:33 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:33 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:34 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:34 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:35 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:35 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:35 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:36 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:36 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:36 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:37 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:37 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:37 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:38 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:38 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:38 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:39 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:39 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:39 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:39 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:40 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:40 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:40 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:41 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:41 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:41 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:42 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:42 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:42 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:42 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:43 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:43 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:43 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:44 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:44 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:44 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:45 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:45 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:45 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:45 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:46 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:46 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:46 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:47 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:47 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:47 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:48 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:48 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:48 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:48 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:49 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:49 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:49 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:50 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:50 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:50 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:51 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:51 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:51 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:51 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:52 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:52 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:52 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:53 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:53 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:53 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:54 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:54 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:54 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:54 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:55 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:55 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:55 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:56 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:56 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:56 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:57 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:57 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:57 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:57 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:58 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:58 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:58 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:59 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:28:59 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:28:59 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:00 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:00 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:00 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:00 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:01 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:01 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:01 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:02 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:02 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:02 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:03 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:03 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:03 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:03 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:03 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:04 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:04 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:04 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:04 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:05 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:05 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:05 996718 r hd02 [nagra] serverbox emmtype=global, len=139, idx=0, cnt=1: written (630 ms)
2015/12/23 22:29:05 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:06 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:06 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:06 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:06 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:07 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:07 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:07 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:08 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:08 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:08 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:09 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:09 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:09 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:09 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:10 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:10 996718 r hd02 [nagra] serverbox emmtype=global, len=139, idx=1, cnt=1: written (611 ms)
2015/12/23 22:29:10 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:10 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:11 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:11 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:11 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/23 22:29:11 9BFBE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/23 22:29:12 9BFBE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

und immer so weiter...

so hier die files hoffe die reichen so:

oscam.conf

Spoiler

[global]
logfile = /var/log/oscam.log
maxlogsize = 256
nice = -1
preferlocalcards = 1
fallbacktimeout = 2500
ecmfmt = c/s/l/y
# y zeigt payload, erst ab oscam ca 10830, sonst y entfernen
#kein emmlogdir >>> emmlogs im oscam config ordner

[cccam]
port = 33333
version = 2.3.0
reshare = 1
ignorereshare = 0

[dvbapi]
enabled = 1
au = 1
read_sdt = 2
write_sdt_prov = 1
user = serverbox
boxtype = dreambox

[webif]
httpport = 17000
httpuser =
httppwd =
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
http_status_log = 1

oscam.user

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_emu SVN r9450
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = serverbox
au = 1
group = 1,2
cccignorereshare = 0

[account]
disabled = 1
user = client1
pwd = pass1
uniq = 3
keepalive = 1
group = 1,2
cccreshare = 0
cccignorereshare = 0

[account]
disabled = 1
user = client2
pwd = pass2
uniq = 3
keepalive = 1
group = 1,2
cccreshare = 0
cccignorereshare = 0

[account]
disabled = 1
user = local
au = 1
group = 1,2
cccignorereshare = 0

oscam.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_emu SVN r9450
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = hd01
description = HD+weiss
enable = 0
protocol = internal
device = /dev/sci1
services = hd01
caid = 1830
boxkey = A7...37C
rsakey = BF...DD5
detect = cd
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2

[reader]
label = hd02
description = HD+schwarz
protocol = internal
device = /dev/sci0
caid = 1843
boxkey = A7...37C
rsakey = BF...DD5
detect = cd
mhz = 540
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = v13oben
description = V13-Sky
enable = 0
protocol = internal
device = /dev/sci0
services = sky_v13,v13hdplus
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = v14oben
description = V14-Sky
enable = 0
protocol = internal
device = /dev/sci0
services = sky_v14,v14hdplus
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 540
cardmhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = v13unten
description = V13-Sky
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = v14unten
description = V14-Sky
enable = 0
protocol = internal
device = /dev/sci1
services = sky_v14,v14hdplus
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = cline_1
description = erhaltene_c-line_vom_server1
enable = 0
protocol = cccam
device = serverdyndns_serverip
user = c_line_user
password = c_line_pass
group = 2
blockemm-unknown = 1
cccversion = 2.3.0
ccckeepalive = 1

oscam.dvbapi

Spoiler

# nur bei Receivern mit oscam zu verwenden, hilfreich aber nicht zwingend notwendig
# hier zeilenweise die caid der karten und proxy reader aus oscam.server eintragen
# P: bedeutet Priorisieren, die abarbeitung der sender caid beginnt mit der 1. zeile
# bei der senderabfrage am server wird zuerst
# die caid 1830 zur entschluesselung versucht und die zugehörige karte gelesen, danach erst 098C
# beispiel, bitte unbedingt vor dem kopieren bearbeiten !!!!!! # vor P und I entfernen !!!
#
# P: 0D05
P: 1830
# P: 1843
# P: 09C4
P: 098C
I: 0
#
# zb wird mit I: 1722 die caid 1722 ausgeschlossen (Ignore), mit 0 dann alle, die nicht bei P: stehen
# diese datei wird zu den anderen oscam configs kopiert, bei änderungen oscam neu starten
#
### >>> gleiche funktion erhält man für cccam clients mit CCcam.prio <<<

So denke das war alles

aber wie gesagt, bisschen etwas habe ich schon dazugerlernt... also webif kannte ich von oscam vorher nicht

 

[webman2]

AW: Oscam für HD02 + V13

In der oscam.server fehlen die services .. hast doch nicht kopiert.

Spoiler

[reader]
label = v13unten
description = V13-Sky
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,2
services = ???????
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

[thronis]

AW: Oscam für HD02 + V13

so die habe ich jetzt angeklickt im web interface

Spoiler

[reader]
label = v13unten
description = V13-Sky
protocol = internal
device = /dev/sci1
services = sky_v13
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

leider funktioniert es trotzdem noch nicht.

logfile

Spoiler

2015/12/24 00:11:33 A27BE8 c [DVBAPI] Receiver sends PMT command 3 for channel EF74
2015/12/24 00:11:33 A27BE8 c [DVBAPI] Receiver wants to demux srvid EF74 on adapter 0000 camask 0001 index 0000 pmtpid 0060
2015/12/24 00:11:33 A27BE8 c [ADD PID 0] CAID: 1830 ECM_PID: 1CEA PROVID: 000000
2015/12/24 00:11:33 A27BE8 c [ADD PID 1] CAID: 1843 ECM_PID: 19EA PROVID: 000000
2015/12/24 00:11:33 A27BE8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BEA PROVID: 000000
2015/12/24 00:11:33 A27BE8 c [ADD PID 3] CAID: 098C ECM_PID: 1AEA PROVID: 000000
2015/12/24 00:11:33 A27BE8 c [ADD PID 4] CAID: 1860 ECM_PID: 1EEA PROVID: 000000
2015/12/24 00:11:33 A27BE8 c [ADD PID 5] CAID: 186A ECM_PID: 1DEA PROVID: 000000
2015/12/24 00:11:33 A27BE8 c Found 6 ECMpids and 6 STREAMpids in PMT
2015/12/24 00:11:33 A27BE8 c [DVBAPI] Receiver wants to demux srvid EF74 on adapter 0000 camask 0001 index 0000 pmtpid 0060
2015/12/24 00:11:33 A27BE8 c New program number: EF74 (Sat.1 HD) [pmt_list_management 3]
2015/12/24 00:11:33 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:33 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:33 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:33 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:34 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:34 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:34 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:34 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:35 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:35 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:35 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:36 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:36 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:36 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:37 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:37 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:37 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:37 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:38 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:38 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:38 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:39 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:39 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:39 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:40 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:40 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:40 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:40 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:41 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:41 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:41 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:42 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:42 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:42 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:43 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:43 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:43 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:43 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:44 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:44 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:44 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:45 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:45 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:45 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:46 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:46 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:46 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:46 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:47 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:47 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:47 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:48 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:48 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:48 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:49 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:49 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:49 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:49 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:50 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:50 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:50 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:51 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:51 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:51 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:52 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:52 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:52 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:52 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:53 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:53 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2015/12/24 00:11:53 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:54 A27BE8 c [DVBAPI] Receiver sends PMT command 3 for channel 0083
2015/12/24 00:11:54 A27BE8 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0001 index 0000 pmtpid 0064
2015/12/24 00:11:54 A27BE8 c [ADD PID 0] CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
2015/12/24 00:11:54 A27BE8 c [ADD PID 1] CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
2015/12/24 00:11:54 A27BE8 c [ADD PID 2] CAID: 098C ECM_PID: 1AB6 PROVID: 000000
2015/12/24 00:11:54 A27BE8 c Found 3 ECMpids and 5 STREAMpids in PMT
2015/12/24 00:11:54 A27BE8 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0001 index 0000 pmtpid 0064
2015/12/24 00:11:54 A27BE8 c New program number: 0083 (Sky Cinema HD) [pmt_list_management 3]
2015/12/24 00:11:54 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:54 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/12/24 00:11:55 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:55 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/12/24 00:11:55 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:55 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/12/24 00:11:55 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:55 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/12/24 00:11:56 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:56 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/12/24 00:11:56 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:56 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/12/24 00:11:57 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:57 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/12/24 00:11:57 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:58 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/12/24 00:11:58 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:58 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/12/24 00:11:59 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:11:59 A27BE8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/12/24 00:11:59 A27BE8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/12/24 00:12:01 A27BE8 c [DVBAPI] Receiver sends PMT command 3 for channel 2EF4
2015/12/24 00:12:01 A27BE8 c [DVBAPI] Receiver wants to demux srvid 2EF4 on adapter 0000 camask 0001 index 0000 pmtpid 002E
2015/12/24 00:12:01 A27BE8 c Found 0 ECMpids and 7 STREAMpids in PMT
2015/12/24 00:12:01 A27BE8 c [DVBAPI] Receiver wants to demux srvid 2EF4 on adapter 0000 camask 0001 index 0000 pmtpid 002E
2015/12/24 00:12:01 A27BE8 c New program number: 2EF4 (FFFE:2EF4 unknown) [pmt_list_management 3]

 

[webman2]

AW: Oscam für HD02 + V13

Du hast es noch nicht verstanden ..

Du musst die SRVIDS der HD+-Sender von der V13 blocken...

Du brauchst doch nur kopieren, von dem, was ich gepostet habe.

In der oscam.dvbapi hast Du caid = 1830 geschrieben ..

P:1843
P:09C4
I:0

 

[thronis]

AW: Oscam für HD02 + V13

verstehe ich jetzt leider wirklich nicht :-(
also wenn ich jetzt ins webif gehe unter readers hd02 steht dort als caid 1843. das ist also richtig?
unter readers skyv13 steht unter caid 09c4
die restlichen reader sind ja nicht aktiv.
ich werde die einmal raus nehmen benötige ich ja eh nicht

jetzt sieht die oscam.server so aus

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_emu SVN r9450
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = hd02
description = HD+schwarz
protocol = internal
device = /dev/sci0
services = hd02
caid = 1843
boxkey = A7...37C
rsakey = BF...DD5
detect = cd
mhz = 540
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = v13unten
description = V13-Sky
protocol = internal
device = /dev/sci1
services = sky_v13
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = cline_1
description = erhaltene_c-line_vom_server1
enable = 0
protocol = cccam
device = serverdyndns_serverip
user = c_line_user
password = c_line_pass
group = 2
blockemm-unknown = 1
cccversion = 2.3.0
ccckeepalive = 1

 

[webman2]

AW: Oscam für HD02 + V13

Also jetzt nochmal ... bitte mach' copy/paste.

oscam.server

Spoiler

[reader]
label                         = hd02
description                   = HD+schwarz
protocol                      = internal
device                        = /dev/sci0
caid                          = 1843
boxkey                        = A7...37C
rsakey                        = BF...DD5
detect                        = cd
mhz                           = 540
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,1,2

[reader]
label                         = v13unten
description                   = V13-Sky
protocol                      = internal
device                        = /dev/sci1
services                      = !hdplus
caid                          = 09C4
boxid                         = 12345678
ins7e11                       = 15
detect                        = cd
mhz                           = 450
cardmhz                       = 2700
group                         = 2
emmcache                      = 1,1,2
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1
ndsversion                    = 2

oscam.services

Spoiler

[hdplus]
caid = 09C4
srvid = 0002,2777,30D4,277E,EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,2E9B,151A,157F,157C,1581,EF78,2774,2EAF

oscam.dvbapi

P:1843
P:09C4
I:0

 

[thronis]

AW: Oscam für HD02 + V13

es ist hell :good:
vielen vielen dank.
und sorry für meine blondheit

 

[webman2]

AW: Oscam für HD02 + V13

Ändere auch noch in der oscam.user das au .. sonst klappt die Verlängerung evtl. nicht ..

Spoiler

[account]
user                          = serverbox
au                            = v13unten,hd02
group                         = 1,2
cccignorereshare              = 0