OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"!!!

Sep 8 19:04:04 OpenWrt kern.info kernel: [ 13.670000] device eth0 entered promiscuous mode
Sep 8 19:04:04 OpenWrt kern.info kernel: [ 13.680000] br-lan: port 1(eth0.1) entered forwarding state
Sep 8 19:04:04 OpenWrt kern.info kernel: [ 13.680000] br-lan: port 1(eth0.1) entered forwarding state
Sep 8 19:04:04 OpenWrt daemon.notice netifd: Interface 'lan' is now up
Sep 8 19:04:04 OpenWrt daemon.notice netifd: Interface 'loopback' is now up
Sep 8 19:04:04 OpenWrt daemon.notice netifd: wan (663): udhcpc (v1.19.4) started
Sep 8 19:04:04 OpenWrt daemon.notice netifd: wan (663): Sending discover...
Sep 8 19:04:04 OpenWrt user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Sep 8 19:04:05 OpenWrt user.info sysinit: 'radio0' is disabled
Sep 8 19:04:05 OpenWrt user.info sysinit: 'radio1' is disabled
Sep 8 19:04:05 OpenWrt user.notice ifup: Enabling Router Solicitations on loopback (lo)
Sep 8 19:04:05 OpenWrt user.info sysinit: 'radio0' is disabled
Sep 8 19:04:06 OpenWrt user.info sysinit: 'radio1' is disabled
Sep 8 19:04:06 OpenWrt kern.info kernel: [ 15.680000] br-lan: port 1(eth0.1) entered forwarding state
Sep 8 19:04:06 OpenWrt user.info sysinit: 'radio0' is disabled
Sep 8 19:04:06 OpenWrt user.info sysinit: 'radio1' is disabled
Sep 8 19:04:07 OpenWrt user.info sysinit: Loading defaults
Sep 8 19:04:07 OpenWrt user.info sysinit: Loading synflood protection
Sep 8 19:04:07 OpenWrt daemon.notice netifd: wan (663): Sending discover...
Sep 8 19:04:07 OpenWrt user.info sysinit: Adding custom chains
Sep 8 19:04:07 OpenWrt user.info sysinit: Loading zones
Sep 8 19:04:08 OpenWrt user.info sysinit: Loading forwardings
Sep 8 19:04:08 OpenWrt user.info sysinit: Loading rules
Sep 8 19:04:08 OpenWrt user.info sysinit: Loading redirects
Sep 8 19:04:08 OpenWrt user.info sysinit: Loading includes
Sep 8 19:04:08 OpenWrt user.info sysinit: Optimizing conntrack
Sep 8 19:04:08 OpenWrt user.info sysinit: Loading interfaces
Sep 8 19:04:08 OpenWrt user.info firewall: adding lan (br-lan) to zone lan
Sep 8 19:04:09 OpenWrt authpriv.info dropbear[1113]: Running in background
Sep 8 19:04:10 OpenWrt daemon.notice netifd: wan (663): Sending discover...
Sep 8 19:04:10 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sep 8 19:04:10 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sep 8 19:04:11 OpenWrt daemon.info dnsmasq[1219]: started, version 2.62 cachesize 150
Sep 8 19:04:11 OpenWrt daemon.info dnsmasq[1219]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Sep 8 19:04:11 OpenWrt daemon.info dnsmasq[1219]: using local addresses only for domain lan
Sep 8 19:04:11 OpenWrt daemon.info dnsmasq[1219]: reading /tmp/resolv.conf.auto
Sep 8 19:04:11 OpenWrt daemon.info dnsmasq[1219]: using nameserver 192.168.0.1#53
Sep 8 19:04:11 OpenWrt daemon.info dnsmasq[1219]: using local addresses only for domain lan
Sep 8 19:04:11 OpenWrt daemon.info dnsmasq[1219]: read /etc/hosts - 1 addresses
Sep 8 19:04:11 OpenWrt user.info sysinit: setting up led WAN LED (green)
Sep 8 19:04:11 OpenWrt user.info sysinit: tail: can't open '/tmp/oscam.log': No such file or directory
Sep 8 19:04:11 OpenWrt user.info sysinit: tail: no files
Sep 8 19:04:11 OpenWrt user.info sysinit: Oscam wird gestartet!
Sep 8 19:04:14 OpenWrt user.info sysinit: Oscam wurde erfolgreich gestartet!
Sep 8 19:04:14 OpenWrt user.notice root: Oscam wurde erfolgreich gestartet!
Sep 8 19:04:14 OpenWrt user.info sysinit: Watchdog: Watchdog ist deaktiviert in /etc/config/oscam/oscam.watchdog. ( watchdog = 1 zum aktivieren )
Sep 8 19:04:14 OpenWrt user.notice root: Watchdog: Watchdog ist deaktiviert in /etc/config/oscam/oscam.watchdog. ( watchdog = 1 zum aktivieren )
Nov 17 17:16:37 OpenWrt authpriv.info dropbear[3388]: Child connection from 192.168.0.105:62950
Nov 17 17:21:39 OpenWrt authpriv.info dropbear[3388]: Exit before auth: Timeout before auth
Nov 17 17:52:08 OpenWrt authpriv.info dropbear[12758]: Child connection from 192.168.0.105:50267
Nov 17 17:52:12 OpenWrt authpriv.notice dropbear[12758]: Password auth succeeded for 'root' from 192.168.0.105:50267
Nov 17 17:55:49 OpenWrt authpriv.info dropbear[13771]: Child connection from 192.168.0.105:50668
Nov 17 17:55:57 OpenWrt authpriv.notice dropbear[13771]: Password auth succeeded for 'root' from 192.168.0.105:50668
Nov 17 18:49:31 OpenWrt authpriv.info dropbear[12758]: Exit (root): Exited normally
Nov 17 18:49:31 OpenWrt authpriv.info dropbear[13771]: Exit (root): Exited normally
Nov 17 18:50:21 OpenWrt authpriv.info dropbear[28356]: Child connection from 192.168.0.105:56233
Nov 17 18:50:30 OpenWrt authpriv.notice dropbear[28356]: Password auth succeeded for 'root' from 192.168.0.105:56233
Nov 17 19:58:00 OpenWrt kern.info kernel: [10237.890000] device wlan0 entered promiscuous mode
Nov 17 19:58:00 OpenWrt kern.info kernel: [10237.950000] br-lan: port 2(wlan0) entered forwarding state
Nov 17 19:58:00 OpenWrt kern.info kernel: [10237.960000] br-lan: port 2(wlan0) entered forwarding state
Nov 17 19:58:02 OpenWrt kern.info kernel: [10239.960000] br-lan: port 2(wlan0) entered forwarding state
Nov 17 20:00:09 OpenWrt kern.info kernel: [10367.220000] device wlan0 left promiscuous mode
Nov 17 20:00:09 OpenWrt kern.info kernel: [10367.220000] br-lan: port 2(wlan0) entered disabled state
Nov 17 20:00:11 OpenWrt kern.info kernel: [10368.340000] cfg80211: Calling CRDA for country: DE
Nov 17 20:00:11 OpenWrt kern.info kernel: [10368.340000] cfg80211: Regulatory domain changed to country: DE
Nov 17 20:00:11 OpenWrt kern.info kernel: [10368.350000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov 17 20:00:11 OpenWrt kern.info kernel: [10368.360000] cfg80211: (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Nov 17 20:00:11 OpenWrt kern.info kernel: [10368.370000] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Nov 17 20:00:11 OpenWrt kern.info kernel: [10368.370000] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Nov 17 20:00:11 OpenWrt kern.info kernel: [10368.380000] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Nov 17 20:00:12 OpenWrt kern.info kernel: [10370.030000] device wlan0 entered promiscuous mode
Nov 17 20:00:13 OpenWrt kern.info kernel: [10371.310000] br-lan: port 2(wlan0) entered forwarding state
Nov 17 20:00:13 OpenWrt kern.info kernel: [10371.320000] br-lan: port 2(wlan0) entered forwarding state
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[1219]: reading /tmp/resolv.conf.auto
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[1219]: using nameserver 192.168.0.1#53
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[1219]: using local addresses only for domain lan
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[1219]: exiting on receipt of SIGTERM
Nov 17 20:00:15 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Nov 17 20:00:15 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[17099]: started, version 2.62 cachesize 150
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[17099]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[17099]: using local addresses only for domain lan
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[17099]: reading /tmp/resolv.conf.auto
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[17099]: using nameserver 192.168.0.1#53
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[17099]: using local addresses only for domain lan
Nov 17 20:00:15 OpenWrt daemon.info dnsmasq[17099]: read /etc/hosts - 1 addresses
Nov 17 20:00:15 OpenWrt kern.info kernel: [10373.320000] br-lan: port 2(wlan0) entered forwarding state
Nov 17 20:00:18 OpenWrt user.info firewall: adding lan (br-lan) to zone lan
Nov 17 20:04:45 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be IEEE 802.11: authenticated
Nov 17 20:04:45 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be IEEE 802.11: associated (aid 1)
Nov 17 20:04:45 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be WPA: pairwise key handshake completed (RSN)
Nov 17 20:10:13 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be WPA: group key handshake completed (RSN)
Nov 17 20:11:26 OpenWrt kern.info kernel: [11043.730000] device wlan0 left promiscuous mode
Nov 17 20:11:26 OpenWrt kern.info kernel: [11043.730000] br-lan: port 2(wlan0) entered disabled state
Nov 17 20:11:28 OpenWrt kern.info kernel: [11045.550000] device wlan0 entered promiscuous mode
Nov 17 20:11:28 OpenWrt daemon.warn hostapd: wlan0: IEEE 802.11 Configured HT40 secondary channel (15) not found from the channel list of current mode (1) IEEE 802.11g
Nov 17 20:11:28 OpenWrt daemon.warn hostapd: wlan0: IEEE 802.11 Configured channel (11) not found from the channel list of current mode (1) IEEE 802.11g
Nov 17 20:11:28 OpenWrt daemon.warn hostapd: wlan0: IEEE 802.11 Hardware does not support configured channel
Nov 17 20:11:28 OpenWrt kern.info kernel: [11045.610000] device wlan0 left promiscuous mode
Nov 17 20:11:28 OpenWrt kern.info kernel: [11045.610000] br-lan: port 2(wlan0) entered disabled state
Nov 17 20:11:28 OpenWrt daemon.info dnsmasq[17099]: reading /tmp/resolv.conf.auto
Nov 17 20:11:28 OpenWrt daemon.info dnsmasq[17099]: using nameserver 192.168.0.1#53
Nov 17 20:11:28 OpenWrt daemon.info dnsmasq[17099]: using local addresses only for domain lan
Nov 17 20:11:28 OpenWrt daemon.info dnsmasq[17099]: exiting on receipt of SIGTERM
Nov 17 20:11:28 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Nov 17 20:11:28 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Nov 17 20:11:29 OpenWrt daemon.info dnsmasq[21237]: started, version 2.62 cachesize 150
Nov 17 20:11:29 OpenWrt daemon.info dnsmasq[21237]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Nov 17 20:11:29 OpenWrt daemon.info dnsmasq[21237]: using local addresses only for domain lan
Nov 17 20:11:29 OpenWrt daemon.info dnsmasq[21237]: reading /tmp/resolv.conf.auto
Nov 17 20:11:29 OpenWrt daemon.info dnsmasq[21237]: using nameserver 192.168.0.1#53
Nov 17 20:11:29 OpenWrt daemon.info dnsmasq[21237]: using local addresses only for domain lan
Nov 17 20:11:29 OpenWrt daemon.info dnsmasq[21237]: read /etc/hosts - 1 addresses
Nov 17 20:11:32 OpenWrt user.info firewall: adding lan (br-lan) to zone lan
Nov 17 20:14:31 OpenWrt kern.info kernel: [11228.790000] device wlan0 entered promiscuous mode
Nov 17 20:14:32 OpenWrt kern.info kernel: [11229.990000] br-lan: port 2(wlan0) entered forwarding state
Nov 17 20:14:32 OpenWrt kern.info kernel: [11230.000000] br-lan: port 2(wlan0) entered forwarding state
Nov 17 20:14:33 OpenWrt daemon.info dnsmasq[21237]: reading /tmp/resolv.conf.auto
Nov 17 20:14:33 OpenWrt daemon.info dnsmasq[21237]: using nameserver 192.168.0.1#53
Nov 17 20:14:33 OpenWrt daemon.info dnsmasq[21237]: using local addresses only for domain lan
Nov 17 20:14:33 OpenWrt daemon.info dnsmasq[21237]: exiting on receipt of SIGTERM
Nov 17 20:14:34 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Nov 17 20:14:34 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Nov 17 20:14:34 OpenWrt daemon.info dnsmasq[22748]: started, version 2.62 cachesize 150
Nov 17 20:14:34 OpenWrt daemon.info dnsmasq[22748]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Nov 17 20:14:34 OpenWrt daemon.info dnsmasq[22748]: using local addresses only for domain lan
Nov 17 20:14:34 OpenWrt daemon.info dnsmasq[22748]: reading /tmp/resolv.conf.auto
Nov 17 20:14:34 OpenWrt daemon.info dnsmasq[22748]: using nameserver 192.168.0.1#53
Nov 17 20:14:34 OpenWrt daemon.info dnsmasq[22748]: using local addresses only for domain lan
Nov 17 20:14:34 OpenWrt daemon.info dnsmasq[22748]: read /etc/hosts - 1 addresses
Nov 17 20:14:34 OpenWrt kern.info kernel: [11232.000000] br-lan: port 2(wlan0) entered forwarding state
Nov 17 20:14:37 OpenWrt user.info firewall: adding lan (br-lan) to zone lan
Nov 17 20:14:54 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be IEEE 802.11: authenticated
Nov 17 20:14:54 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be IEEE 802.11: associated (aid 1)
Nov 17 20:14:54 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be WPA: pairwise key handshake completed (RSN)
Nov 17 20:24:32 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be WPA: group key handshake completed (RSN)
Nov 17 20:34:32 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be WPA: group key handshake completed (RSN)
Nov 17 20:44:32 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be WPA: group key handshake completed (RSN)
Nov 17 20:54:08 OpenWrt authpriv.info dropbear[3119]: Child connection from 192.168.0.105:65346
Nov 17 20:54:23 OpenWrt authpriv.notice dropbear[3119]: Password auth succeeded for 'root' from 192.168.0.105:65346
Nov 17 20:54:32 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be WPA: group key handshake completed (RSN)
Nov 17 20:55:10 OpenWrt authpriv.info dropbear[3119]: Exit (root): Exited normally
Nov 17 20:58:52 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be IEEE 802.11: disassociated
Nov 17 20:58:53 OpenWrt daemon.info hostapd: wlan0: STA 74:2f:68:ed:14:be IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Nov 18 00:41:14 OpenWrt daemon.info hostapd: wlan0: STA 98:03:d8:72:96:f6 IEEE 802.11: authenticated
Nov 18 00:41:14 OpenWrt daemon.info hostapd: wlan0: STA 98:03:d8:72:96:f6 IEEE 802.11: associated (aid 1)
Nov 18 00:41:14 OpenWrt daemon.info hostapd: wlan0: STA 98:03:d8:72:96:f6 WPA: pairwise key handshake completed (RSN)
Nov 18 00:44:32 OpenWrt daemon.info hostapd: wlan0: STA 98:03:d8:72:96:f6 WPA: group key handshake completed (RSN)
Nov 18 00:53:18 OpenWrt authpriv.info dropbear[28356]: Exit (root): Exited normally
Nov 18 00:54:32 OpenWrt daemon.info hostapd: wlan0: STA 98:03:d8:72:96:f6 WPA: group key handshake completed (RSN)
Nov 18 01:04:41 OpenWrt daemon.info hostapd: wlan0: STA 98:03:d8:72:96:f6 IEEE 802.11: deauthenticated due to local deauth request
Nov 18 01:11:34 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: authenticated
Nov 18 01:11:34 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: associated (aid 1)
Nov 18 01:11:34 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 WPA: pairwise key handshake completed (RSN)
Nov 18 01:14:32 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 WPA: group key handshake completed (RSN)
Nov 18 01:24:33 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 WPA: group key handshake completed (RSN)
Nov 18 01:29:37 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: authenticated
Nov 18 01:29:37 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: associated (aid 1)
Nov 18 01:29:44 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: authenticated
Nov 18 01:29:44 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: associated (aid 1)
Nov 18 01:29:51 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: authenticated
Nov 18 01:29:51 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: associated (aid 1)
Nov 18 01:29:58 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: authenticated
Nov 18 01:29:58 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: associated (aid 1)
Nov 18 01:29:58 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 WPA: pairwise key handshake completed (RSN)
Nov 18 01:30:30 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: disassociated
Nov 18 01:30:31 OpenWrt daemon.info hostapd: wlan0: STA 5c:0a:5b:43:5a:b8 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)

[ 0.000000] Linux version 3.3.8 (derdigge@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #25 Sat Nov 17 11:24:44 CET 2012
[ 0.000000] MyLoader: sysp=aaaa5554, boardp=aaaa5554, parts=aaaa5554
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR7161 rev 2
[ 0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00004000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00004000
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802ef060, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=WNDR3700 console=ttyS0,115200 mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,960k(kernel),14912k(rootfs),64k(art)ro,15872k@0x70000(firmware) rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61496k/65536k available (2208k kernel code, 4040k reserved, 413k data, 212k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
[ 0.060000] pid_max: default: 32768 minimum: 301
[ 0.060000] Mount-cache hash table entries: 512
[ 0.070000] NET: Registered protocol family 16
[ 0.070000] gpiochip_add: registered GPIOs 0 to 15 on device: ath79
[ 0.080000] MIPS: machine is NETGEAR WNDR3700/WNDR3800/WNDRMAC
[ 2.680000] registering PCI controller with io_map_base unset
[ 2.690000] bio: create slab <bio-0> at 0
[ 2.700000] PCI host bridge to bus 0000:00
[ 2.700000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x16ffffff]
[ 2.710000] pci_bus 0000:00: root bus resource [io 0x0000]
[ 2.710000] pci 0000:00:11.0: [168c:ff1d] type 0 class 0x000200
[ 2.710000] pci 0000:00:11.0: fixup device configuration
[ 2.720000] pci 0000:00:11.0: reg 10: [mem 0x00000000-0x0000ffff]
[ 2.720000] pci 0000:00:11.0: PME# supported from D0 D3hot
[ 2.720000] pci 0000:00:12.0: [168c:ff1d] type 0 class 0x000200
[ 2.720000] pci 0000:00:12.0: fixup device configuration
[ 2.720000] pci 0000:00:12.0: reg 10: [mem 0x00000000-0x0000ffff]
[ 2.720000] pci 0000:00:12.0: PME# supported from D0 D3hot
[ 2.720000] pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
[ 2.730000] pci 0000:00:12.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
[ 2.730000] pci 0000:00:11.0: using irq 40 for pin 1
[ 2.740000] pci 0000:00:12.0: using irq 41 for pin 1
[ 2.740000] Switching to clocksource MIPS
[ 2.750000] NET: Registered protocol family 2
[ 2.750000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 2.750000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 2.760000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 2.760000] TCP: Hash tables configured (established 2048 bind 2048)
[ 2.770000] TCP reno registered
[ 2.770000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 2.780000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 2.780000] NET: Registered protocol family 1
[ 2.790000] PCI: CLS 0 bytes, default 32
[ 2.800000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.810000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.820000] msgmni has been set to 120
[ 2.820000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 2.830000] io scheduler noop registered
[ 2.830000] io scheduler deadline registered (default)
[ 2.840000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.870000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 2.870000] console [ttyS0] enabled, bootconsole disabled
[ 2.890000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 2.890000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 2.900000] 6 cmdlinepart partitions found on MTD device spi0.0
[ 2.900000] Creating 6 MTD partitions on "spi0.0":
[ 2.910000] 0x000000000000-0x000000050000 : "u-boot"
[ 2.910000] 0x000000050000-0x000000070000 : "u-boot-env"
[ 2.920000] 0x000000070000-0x000000160000 : "kernel"
[ 2.930000] 0x000000160000-0x000000ff0000 : "rootfs"
[ 2.930000] mtd: partition "rootfs" set to be root filesystem
[ 2.940000] mtd: partition "rootfs_data" created automatically, ofs=410000, len=BE0000
[ 2.950000] 0x000000410000-0x000000ff0000 : "rootfs_data"
[ 2.950000] 0x000000ff0000-0x000001000000 : "art"
[ 2.960000] 0x000000070000-0x000000ff0000 : "firmware"
[ 2.970000] Realtek RTL8366S ethernet switch driver version 0.2.2
[ 2.970000] rtl8366s rtl8366s: using GPIO pins 5 (SDA) and 7 (SCK)
[ 2.980000] rtl8366s rtl8366s: RTL8366 ver. 1 chip found
[ 3.020000] rtl8366s: probed
[ 3.020000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[ 3.330000] eth1: Atheros AG71xx at 0xba000000, irq 5
[ 3.640000] ag71xx ag71xx.1: eth1: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Generic PHY]
[ 3.640000] TCP cubic registered
[ 3.650000] NET: Registered protocol family 17
[ 3.650000] Bridge firewalling registered
[ 3.660000] 8021q: 802.1Q VLAN Support v1.8
[ 3.670000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 3.670000] Freeing unused kernel memory: 212k freed
[ 5.270000] ar71xx: pll_reg 0xb8050010: 0x11110000
[ 5.270000] eth0: link up (1000Mbps/Full duplex)
[ 5.290000] Registered led device: wndr3700:greenower
[ 5.290000] Registered led device: wndr3700rangeower
[ 5.290000] Registered led device: wndr3700:green:wps
[ 5.290000] Registered led device: wndr3700range:wps
[ 5.290000] Registered led device: wndr3700:green:wan
[ 8.520000] JFFS2 notice: (475) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 19 of xref (0 dead, 9 orphan) found.
[ 8.650000] eth0: link down
[ 9.930000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 9.940000] Backport based on wireless-testing.git master-2012-09-07
[ 9.940000] compat.git: wireless-testing.git
[ 9.980000] cfg80211: Calling CRDA to update world regulatory domain
[ 9.980000] cfg80211: World regulatory domain updated:
[ 9.990000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.990000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.000000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.010000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.020000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.030000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.170000] usbcore: registered new interface driver usbfs
[ 10.180000] usbcore: registered new interface driver hub
[ 10.180000] usbcore: registered new device driver usb
[ 10.500000] PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
[ 10.520000] ath: EEPROM regdomain: 0x0
[ 10.520000] ath: EEPROM indicates default country code should be used
[ 10.520000] ath: doing EEPROM country->regdmn map search
[ 10.520000] ath: country maps to regdmn code: 0x3a
[ 10.520000] ath: Country alpha2 being used: US
[ 10.520000] ath: Regpair used: 0x3a
[ 10.520000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.520000] Registered led device: ath9k-phy0
[ 10.520000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[ 10.530000] PCI: Enabling device 0000:00:12.0 (0000 -> 0002)
[ 10.540000] ath: EEPROM regdomain: 0x0
[ 10.540000] ath: EEPROM indicates default country code should be used
[ 10.540000] ath: doing EEPROM country->regdmn map search
[ 10.540000] ath: country maps to regdmn code: 0x3a
[ 10.540000] ath: Country alpha2 being used: US
[ 10.540000] ath: Regpair used: 0x3a
[ 10.550000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 10.550000] Registered led device: ath9k-phy1
[ 10.550000] ieee80211 phy1: Atheros AR9280 Rev:2 mem=0xb0010000, irq=41
[ 10.560000] cfg80211: Calling CRDA for country: US
[ 10.560000] cfg80211: Regulatory domain changed to country: US
[ 10.570000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.570000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 10.580000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 10.590000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.600000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.600000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.610000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 10.770000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.840000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.840000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[ 10.850000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 10.890000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 10.910000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 10.910000] hub 1-0:1.0: USB hub found
[ 10.920000] hub 1-0:1.0: 2 ports detected
[ 10.930000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)
[ 11.070000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.070000] ohci-platform ohci-platform: Generic Platform OHCI Controller
[ 11.080000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
[ 11.090000] ohci-platform ohci-platform: irq 14, io mem 0x1c000000
[ 11.150000] hub 2-0:1.0: USB hub found
[ 11.150000] hub 2-0:1.0: 2 ports detected
[ 11.230000] usbcore: registered new interface driver usbserial
[ 11.230000] USB Serial support registered for generic
[ 11.270000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 11.420000] hub 1-1:1.0: USB hub found
[ 11.420000] hub 1-1:1.0: 4 ports detected
[ 11.430000] usbcore: registered new interface driver usbserial_generic
[ 11.430000] usbserial: USB Serial Driver core
[ 11.450000] USB Serial support registered for FTDI USB Serial Device
[ 11.460000] usbcore: registered new interface driver ftdi_sio
[ 11.460000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 11.710000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[ 11.820000] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[ 11.830000] usb 1-1.1: Detected FT232RL
[ 11.840000] usb 1-1.1: Number of endpoints 2
[ 11.840000] usb 1-1.1: Endpoint 1 MaxPacketSize 16384
[ 11.840000] usb 1-1.1: Endpoint 2 MaxPacketSize 16384
[ 11.850000] usb 1-1.1: Setting MaxPacketSize 64
[ 11.860000] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 11.940000] usb 1-1.3: new full-speed USB device number 4 using ehci-platform
[ 12.050000] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 12.060000] usb 1-1.3: Detected FT232RL
[ 12.070000] usb 1-1.3: Number of endpoints 2
[ 12.070000] usb 1-1.3: Endpoint 1 MaxPacketSize 16384
[ 12.070000] usb 1-1.3: Endpoint 2 MaxPacketSize 16384
[ 12.080000] usb 1-1.3: Setting MaxPacketSize 64
[ 12.090000] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 12.170000] usb 1-1.4: new high-speed USB device number 5 using ehci-platform
[ 12.280000] hub 1-1.4:1.0: USB hub found
[ 12.280000] hub 1-1.4:1.0: 4 ports detected
[ 12.690000] usb 1-1.4.4: new full-speed USB device number 6 using ehci-platform
[ 12.810000] ftdi_sio 1-1.4.4:1.0: FTDI USB Serial Device converter detected
[ 12.810000] usb 1-1.4.4: Detected FT232RL
[ 12.820000] usb 1-1.4.4: Number of endpoints 2
[ 12.820000] usb 1-1.4.4: Endpoint 1 MaxPacketSize 16384
[ 12.830000] usb 1-1.4.4: Endpoint 2 MaxPacketSize 16384
[ 12.830000] usb 1-1.4.4: Setting MaxPacketSize 64
[ 12.880000] usb 1-1.4.4: FTDI USB Serial Device converter now attached to ttyUSB2
[ 13.660000] ar71xx: pll_reg 0xb8050010: 0x11110000
[ 13.660000] eth0: link up (1000Mbps/Full duplex)
[ 13.670000] device eth0.1 entered promiscuous mode
[ 13.670000] device eth0 entered promiscuous mode
[ 13.680000] br-lan: port 1(eth0.1) entered forwarding state
[ 13.680000] br-lan: port 1(eth0.1) entered forwarding state
[ 15.680000] br-lan: port 1(eth0.1) entered forwarding state
[10237.890000] device wlan0 entered promiscuous mode
[10237.950000] br-lan: port 2(wlan0) entered forwarding state
[10237.960000] br-lan: port 2(wlan0) entered forwarding state
[10239.960000] br-lan: port 2(wlan0) entered forwarding state
[10367.220000] device wlan0 left promiscuous mode
[10367.220000] br-lan: port 2(wlan0) entered disabled state
[10368.340000] cfg80211: Calling CRDA for country: DE
[10368.340000] cfg80211: Regulatory domain changed to country: DE
[10368.350000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[10368.360000] cfg80211: (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[10368.370000] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[10368.370000] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[10368.380000] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[10370.030000] device wlan0 entered promiscuous mode
[10371.310000] br-lan: port 2(wlan0) entered forwarding state
[10371.320000] br-lan: port 2(wlan0) entered forwarding state
[10373.320000] br-lan: port 2(wlan0) entered forwarding state
[11043.730000] device wlan0 left promiscuous mode
[11043.730000] br-lan: port 2(wlan0) entered disabled state
[11045.550000] device wlan0 entered promiscuous mode
[11045.610000] device wlan0 left promiscuous mode
[11045.610000] br-lan: port 2(wlan0) entered disabled state
[11228.790000] device wlan0 entered promiscuous mode
[11229.990000] br-lan: port 2(wlan0) entered forwarding state
[11230.000000] br-lan: port 2(wlan0) entered forwarding state
[11232.000000] br-lan: port 2(wlan0) entered forwarding state

config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'

config interface 'lan'
option ifname 'eth0.1'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option ipaddr '192.168.0.9'
option gateway '192.168.0.1'
option dns '192.168.0.1'

config interface 'wan'
option ifname 'eth1'
option proto 'dhcp'

config switch
option name 'rtl8366s'
option reset '1'
option enable_vlan '1'
option blinkrate '2'

config switch_vlan
option device 'rtl8366s'
option vlan '1'
option ports '0 1 2 3 5t'

config switch_port
option device 'rtl8366s'
option port '1'
option led '6'

config switch_port
option device 'rtl8366s'
option port '2'
option led '9'

config switch_port
option device 'rtl8366s'
option port '5'
option led '2'