OScam erkennt meine HD+ Karte nicht nach update

[MarkusF1]

Hallo Jungs
ich mach mal hier weiter weil ich fast das selbe Problem habe.

Habe meine 7170 gegen die 7390 ausgetauscht, das Neuste DEB MI Image drauf gemacht und die Configs übernomen

Jetzt erkennt OScam meine HD+ nicht mehr

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Jun 30 18:47:32 2015
-------------------------------------------------------------------------------
2015/06/30 18:47:32 0 s >> OSCam << cardserver started, version 1.20-emu, build r9567 (mips-linux-uclibc-libusb-pcsc)
2015/06/30 18:47:32 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 20745
2015/06/30 18:47:32 0 s services reloaded: 0 services freed, 31 services loaded, rejected 0
2015/06/30 18:47:32 0 s userdb reloaded: 32 accounts loaded, 0 expired, 0 disabled
2015/06/30 18:47:32 0 s signal handling initialized
2015/06/30 18:47:32 0 s 159 service-id's loaded in 7ms
2015/06/30 18:47:32 0 s 161 tier-id's loaded
2015/06/30 18:47:32 0 s 4 provid's loaded
2015/06/30 18:47:32 0 s cccam: initialized (fd=4, port=12000)
2015/06/30 18:47:32 0 s sky_V14 [mouse] creating thread for device /dev/ttyUSB0
2015/06/30 18:47:32 0 s sky_UM [mouse] creating thread for device /dev/ttyUSB1
2015/06/30 18:47:32 0 s HDplus [mouse] creating thread for device /dev/ttyUSB2
2015/06/30 18:47:32 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/06/30 18:47:32 0 s waiting for local card init
2015/06/30 18:47:32 554A68 h webif: decompressed 83585 bytes back into 212224 bytes
2015/06/30 18:47:32 554A68 h HTTP Server running. ip=0.0.0.0 port=17001
2015/06/30 18:47:54 592260 r HDplus [mouse] Reader initialized (device=/dev/ttyUSB2, detect=cd, mhz=369, cardmhz=358)
2015/06/30 18:47:54 590560 r sky_UM [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=600)
2015/06/30 18:47:54 58E860 r sky_V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=358)
2015/06/30 18:47:55 58E860 r sky_V14 [mouse] card detected
2015/06/30 18:47:55 590560 r sky_UM [mouse] card detected
2015/06/30 18:47:55 592260 r HDplus [mouse] card detected
2015/06/30 18:47:56 58E860 r sky_V14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/30 18:47:56 58E860 r sky_V14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/06/30 18:47:56 58E860 r sky_V14 [mouse] Setting baudrate to 153600 bps
2015/06/30 18:47:56 58E860 r sky_V14 [mouse] Calculated work ETU is 3.88 us reader mhz = 600
2015/06/30 18:47:56 58E860 r sky_V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/06/30 18:47:56 590560 r sky_UM [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2015/06/30 18:47:56 590560 r sky_UM [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2015/06/30 18:47:56 590560 r sky_UM [mouse] Calculated work ETU is 93.00 us reader mhz = 600
2015/06/30 18:47:56 590560 r sky_UM [mouse] ATR Fsmax is 6 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/06/30 18:47:57 58E860 r sky_V14 [mouse] Card type: P1TV
2015/06/30 18:47:57 58E860 r sky_V14 [mouse] Rom version: 20AA
2015/06/30 18:47:57 590560 r sky_UM [mouse] detect irdeto tunneled nagra card
2015/06/30 18:47:57 590560 r sky_UM [mouse] no rsa key configured -> using irdeto mode
2015/06/30 18:47:57 590560 r sky_UM [mouse] detect irdeto card
2015/06/30 18:47:57 590560 r sky_UM [mouse] caid: 1722, acs: 3.84, country code: TEL
2015/06/30 18:47:57 590560 r sky_UM [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2015/06/30 18:47:57 58E860 r sky_V14 [mouse] parental lock setting: FF FF FF FF
2015/06/30 18:47:57 58E860 r sky_V14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/06/30 18:47:57 58E860 r sky_V14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/06/30 18:47:57 58E860 r sky_V14 [mouse] ready for requests
2015/06/30 18:47:57 58E860 r sky_V14 [mouse] found card system videoguard2
2015/06/30 18:47:57 58E860 r sky_V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/30 18:47:57 58E860 r sky_V14 [videoguard2] card detected
2015/06/30 18:47:57 58E860 r sky_V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 0056, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 0057, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 0058, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 007b, expiry date: 2015/07/15-01:00:00 Sky
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 007d, expiry date: 2015/07/15-01:00:00 Sky
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 0081, expiry date: 2015/07/15-01:00:00 Sky
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 008e, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00c0, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00c7, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00c8, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00c9, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00ca, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00e4, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00e5, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00f0, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00f3, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00fa, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 58E860 r sky_V14 [videoguard2] tier: 00ff, expiry date: 2015/07/15-01:00:00
2015/06/30 18:47:58 592260 r HDplus [mouse] Error activating card.
2015/06/30 18:48:00 590560 r sky_UM [mouse] active providers: 2 (000000,000000)
2015/06/30 18:48:00 590560 r sky_UM [mouse] found card system irdeto
2015/06/30 18:48:00 590560 r sky_UM [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/30 18:48:01 590560 r sky_UM [irdeto] entitlements for provider: 2, id: 000000
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 05DF, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 7D23, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 04CE, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 05F1, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 05DD, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 05DE, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 0607, date: 2014/02/20 - 2014/11/01
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 318F, date: 2010/08/17 - 2011/04/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 05E8, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 000F, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 7D27, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 05E7, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 00F0, date: 2013/03/19 - 2013/11/28
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 05FB, date: 2014/02/20 - 2014/11/01
2015/06/30 18:48:01 590560 r sky_UM [irdeto] chid: 0608, date: 2014/02/20 - 2014/11/01
2015/06/30 18:48:01 590560 r sky_UM [irdeto] ready for requests
2015/06/30 18:48:02 592260 r HDplus [mouse] Error activating card.

Die V14 (Easymouse2) und UM i12 (Smargo) laufen einwandfrei nur die HD+ (Smargo) will nicht.

Hier meine Oscam.Server

Spoiler

[reader]
label = sky_V14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
cardmhz = 358
ident = 098C:000000
group = 1
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = sky_UM
protocol = mouse
device = /dev/ttyUSB1
caid = 1722
boxkey = 1122334455667788
ecmwhitelist = 93,54,89
detect = cd
mhz = 600
cardmhz = 600
ident = 1722:000000
group = 2
emmcache = 1,2,2
blockemm-unknown = 1
auprovid = 000001

[reader]
label = HDplus
enable = 0
protocol = mouse
device = /dev/ttyUSB2
autospeed = 0
caid = 1830
boxkey = A7*****7C
rsakey = BF********************D5
detect = cd
mhz = 369
cardmhz = 369
ident = 1830:000000,003411,008011
group = 3
emmcache = 1,3,2

hier meine Oscam.Config

Spoiler

[global]
# Speicherpfad für OSCam-logfile. Wird bei der Installation automatisch
# auf das Arbeitsverzeichnis von oscam umgesetzt.
logfile = /var/media/ftp/addon/oscam/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
cwlogdir = 0
# Verzeichnisangabe für emmlogdir.
# Ohne Angabe ist das das Arbeitsverzeichnis von oscam
#emmlogdir =
clienttimeout = 5000
failbantime = 5
Failbancount = 3
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 100
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0

#[monitor]
#port = 988
#nocrypt = 192.168.0.0-192.168.255.255
#aulow = 120
#hideclient_to = 30
#monlevel = 1
#appendchaninfo = 0

#[newcamd]
#port = 34002@1830:003411;34003@09c4:000000;34004@0b00:000000
#key = 0102030405060708091011121314
#allowed = 0.0.0.0-255.255.255.255
#keepalive = 0



[cccam]
port = 12000
reshare = 0
version = 2.2.1
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240
ignorereshare = 1
minimizecards = 0
nodeid =


[webif]
httpport = 17001
httpuser = xxxx
httppwd = xxxx
# Speicherpfad für das Stylesheet. Wird bei der Installation automatisch
# auf das Arbeitsverzeichnis von oscam umgesetzt.
httpcss = /var/media/ftp/addon/oscam/Blue_Shadow_V.2.css
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly = 0

Habt ihr ne idee was es sein könnte ?

 

[rolu2]

AW: OScam erkennt meine HD+ Karte nicht nach update

Wie ist den der Smago eingestellt?

Du musst angemeldet sein, um Bilder zu sehen.

Du musst angemeldet sein, um Bilder zu sehen.

Hast du die Hd+ mal alleine getestet?

 

[MarkusF1]

AW: OScam erkennt meine HD+ Karte nicht nach update

Hallo rolu2

meine Smargos haben die v1.5 Auto T1
und allein die HD+ geht auch nicht

Aus verzweiflung habe ich meine 7170 rausgeholt und dei HD+ da nochmal angeschlossen.

Log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:01:28 2000
-------------------------------------------------------------------------------
2000/01/01 01:01:28 0 s >> OSCam << cardserver started, version 1.20-emu, build r10373 (mipsel-linux-uclibc-libusb)
2000/01/01 01:01:28 0 s (main) System name = Linux
2000/01/01 01:01:28 0 s (main) Host name = fritz.fonwlan.box
2000/01/01 01:01:28 0 s (main) Release = 2.6.13.1-ohio
2000/01/01 01:01:28 0 s (main) Version = #1 Thu Oct 16 19:16:04 CEST 2014
2000/01/01 01:01:28 0 s (main) Machine = mips
2000/01/01 01:01:28 0 s (main) The current system time is smaller than the build date (Feb 2 2015). Waiting up to 60 seconds for time to correct
2015/07/01 15:29:21 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1750
2015/07/01 15:29:21 0 s (config) services reloaded: 0 services freed, 31 services loaded, rejected 0
2015/07/01 15:29:21 0 s [Emu] OSEmu (built-in) version 710
2015/07/01 15:29:22 0 s (config) userdb reloaded: 33 accounts loaded, 0 expired, 0 disabled
2015/07/01 15:29:22 0 s (main) signal handling initialized
2015/07/01 15:29:22 0 s (config) 487 service-id's loaded in 204 ms
2015/07/01 15:29:22 0 s (config) 161 tier-id's loaded
2015/07/01 15:29:22 0 s (config) 4 provid's loaded
2015/07/01 15:29:22 0 s (net) monitor: initialized (fd=6, port=988)
2015/07/01 15:29:22 0 s (net) cccam: initialized (fd=7, port=12000)
2015/07/01 15:29:22 0 s (reader) HDplus [mouse] creating thread for device /dev/ttyUSB0
2015/07/01 15:29:22 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/07/01 15:29:22 0 s (main) waiting for local card init
2015/07/01 15:29:22 5967F0 h (webif) webif: decompressed 100240 bytes back into 264028 bytes
2015/07/01 15:29:22 5967F0 h (webif) HTTP Server running. ip=0.0.0.0 port=17001
2015/07/01 15:29:22 5493A0 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 81907
2015/07/01 15:29:22 5493A0 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 89641
2015/07/01 15:29:22 5493A0 r (reader) HDplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2015/07/01 15:29:23 5493A0 r (reader) HDplus [mouse] card detected
2015/07/01 15:29:23 5493A0 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 87991
2015/07/01 15:29:24 5493A0 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 89978
2015/07/01 15:29:26 5493A0 r (reader) HDplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/07/01 15:29:26 5493A0 r (reader) HDplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/07/01 15:29:26 5493A0 r (reader) HDplus [mouse] Setting baudrate to 111600 bps
2015/07/01 15:29:26 5493A0 r (reader) HDplus [mouse] Calculated work ETU is 8.94 us reader mhz = 358
2015/07/01 15:29:26 5493A0 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 81328
2015/07/01 15:29:26 5493A0 r (reader) HDplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2015/07/01 15:29:26 5493A0 r (reader) HDplus [mouse] Card responded ok for ifsd request of 28
2015/07/01 15:29:27 5493A0 r (reader) HDplus [mouse] detect native nagra card
2015/07/01 15:29:30 5493A0 r (reader) HDplus [mouse] ready for requests
2015/07/01 15:29:30 5493A0 r (reader) HDplus [mouse] found card system nagra
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] ROM: D N A S P 1 4 2
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] REV: R e v G C 6
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] SER: ############
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] CAID: 1830
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] Prv.ID: 00 00 00 00
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] IRD ID: ############
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] active to: 2015/08/22 12:59
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] -----------------------------------------
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] |id |tier |valid from |valid to |
2015/07/01 15:29:30 5493A0 r (reader) HDplus [nagra] +----+--------+------------+------------+
2015/07/01 15:29:31 5493A0 r (reader) HDplus [nagra] |8011|0064 |2011/02/11 |2012/02/12 |
2015/07/01 15:29:31 5493A0 r (reader) HDplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2015/07/01 15:29:31 5493A0 r (reader) HDplus [nagra] |8011|0BB8 |2015/05/20 |2015/08/17 |
2015/07/01 15:29:31 5493A0 r (reader) HDplus [nagra] |8011|0BEA |2012/03/25 |2015/06/03 |
2015/07/01 15:29:31 5493A0 r (reader) HDplus [nagra] -----------------------------------------
2015/07/01 15:29:32 0 s (main) init for all local cards done
2015/07/01 15:29:32 0 s (anticasc) anti cascading disabled

Also Reader und Card sind OK. Auf der 7170 ist OSCam Addon Version 1.3.2, auf der 7390 war erst 1.4.2 und jetzt 1.4.0

 

[MarkusF1]

AW: OScam erkennt meine HD+ Karte nicht nach update

Es muss am Smargo einstellungen liegen, da die HD+ in der Easymouse einwandfrei läuft.

Leider kann ich aus irgend einen Grund den Dreambox Kernel nicht auf Normal stellen. Smartreader wird am PC erkannt und ausgelesen aber kann nicht beschrieben werden.

- - - - - - - - - -

Spricht was dagegen die V14 im Smargo zu betreiben? dort funktioniert die, auch die UM läuft in meinen Smartreader

 

[rolu2]

AW: OScam erkennt meine HD+ Karte nicht nach update

Dagegen sprechen die schlechteres Antwortzeiten. Teste es und sag uns die Zeiten

Gesendet von meinem JY-G3 mit Tapatalk

 

[MarkusF1]

AW: OScam erkennt meine HD+ Karte nicht nach update

Habe jetzt alle 5 verfügbaren Clienten auf die V14 geschaltet und Zeiten 86-92 ist eigentlich erstaunlich gut. Mit der Easymouse hatte ich ab und zu knapp 100 .

Genau so erstaunlich sind jetzt die Zeiten der HD+ 400-500 (betrieben mit Easymouse2) hatte vorher mit Smargo 280-350.

Hier meine oscam.server

Spoiler

[reader]
label = sky_V14
protocol = smargo
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 534
cardmhz = 600
ident = 098C:000000
group = 1
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = sky_UM
protocol = mouse
device = /dev/ttyUSB1
caid = 1722
boxkey = 1122334455667788
ecmwhitelist = 93,54,89
detect = cd
mhz = 600
cardmhz = 600
ident = 1722:000000
group = 2
emmcache = 1,2,2
blockemm-unknown = 1
auprovid = 000001

[reader]
label = HDplus
protocol = mouse
device = /dev/ttyUSB2
smargopatch = 1
caid = 1830
boxkey = A7*******7C
rsakey = BF***********************************D5
ecmwhitelist = 92
detect = cd
mhz = 600
cardmhz = 358
ident = 1830:000000,003411,008011
group = 3
emmcache = 1,2,2
blockemm-unknown = 1
auprovid = 000001

Vielleicht sieht jemand verbesserungs Potenzial

 

[rolu2]

AW: OScam erkennt meine HD+ Karte nicht nach update

Die Zeiten bei der V14 sind gut. Wenn jetzt die easymouse die HD+ liest muss smargopatch = 1 raus

Die Zeiten für die HD+ sind aber nicht tragisch und sollten nicht stören

Edit: Du solltest mal mit services arbeiten. verbessert auch die Zeiten

 

[MarkusF1]

Ok Danke Rolu, dann beschäftige ich mich jetzt mit den Services

Habe den Smargopatch raus genommen und sofort sind die Zeiten auf 320-350 runter.
Danke für den Hinweis