Oscam configuration

[brazzo39]

Hallo Gemeinte.....

Könnte mal ein Profi über meine Oscam Confi schauen ob da alles stimmt.
Nutzte eine Dreambox 800se V2 als Server...
Habe eine HD+ Weiss im unterem und die scheiss V14 noch nicht Aktiviert oben drinnen...

So wenn ich über Oscam die Box laufen lasse, schaue ich nicht über meine eigene HD+ Karte sondern über einen anderen.
Schaut doch mal bitte drüber, danke Jung´s.....

Spoiler

# oscam.conf



[global]
logfile = /var/log/oscam.log
maxlogsize = 256
nice = -1
preferlocalcards = 1
fallbacktimeout = 2500
ecmfmt = c/s/l/y


[cccam]
port = xxxxxx
version = 2.3.0
reshare = 1
ignorereshare = 0






[dvbapi]
enabled = 1
au = 1
read_sdt = 2
write_sdt_prov = 1
user = serverbox
boxtype = dreambox






[webif]
httpport = 17000
httpuser = xxxxxxx
httppwd = xxxxxx
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
http_status_log = 1

Spoiler

# oscam.user



[account]
user = serverbox
au = 1
group = 1,2
cccignorereshare = 0




[account]
user = xxxxxx
pwd = xxxxxx
group = 1,2
cccmaxhops = 3
cccreshare = 1
cccignorereshare = 0

Spoiler

#Oscam.Server

[reader]
label = hd01
description = HD+weiss
protocol = internal
device = /dev/sci1
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 540
cardmhz = 2700
group = 2
emmcache = 1,1,2,0


[reader]
label = v14oben
description = V14-Sky
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2


[reader]
label = xxxxxxxxxxx
protocol = cccam
device = xxxxxxxxxxxxxx
user = xxxxxxxxxxxxxx
password = xxxxxx
inactivitytimeout = 1
group = 2
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 2
emmcache = 1,1,2,1
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000000

Spoiler

# oscam.dvbapi





[dvbapi]

#P: 1830
#P: 098C 1
#I: 0

Hoffe es findet einer den Fehler....

LG
brazzo39

 

[axel]

AW: Oscam configuration

Hi,

das sieht soweit OK aus (?).

# oscam.dvbapi





[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local




P: 1830
P: 098C 1
I: 0

Die P + I-Einträge würde ich zum Test erstmal weglassen...

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

^^ Ich hoffe diesen Eintrag hast Du in der oscam.conf, nicht in der oscam.dvbapi...

Ein Log ab Start wäre hilfreich.

Gruß

 

[brazzo39]

AW: Oscam configuration

Habe es mal wie du es meinst geändert...

Teilweise läuft sie jetzt....

 

[axel]

AW: Oscam configuration

Nimm mal die öffentlichen IPs raus...

Noch ein Tip: Bei so vielen "ungewollten" Tauschpartnern mal Dyndns und / oder Port wechseln...

Leider findet in dem Log keine einzige Abfrage statt.

 

[brazzo39]

AW: Oscam configuration

Wenn ich dieses so habe
#P: 1830
#P: 098C 1
#I: 0
Läuft RTL HD über meine Karte, Pro7 wiederum über den Share...
Wie soll ich jetzt weiter verfahren?

 

[axel]

AW: Oscam configuration

Mal ein Tip am Rande:

Wenn Du die "#" vor irgendeine Einstellung setzt, ist diese #auskommentiert.

Was passiert, wenn Du Deinem Client nur die Gruppe der lokalen Karte gibst?

 

[4gx35]

AW: Oscam configuration

was kommt denn über den proxy reader rein, also welches abos genauer welche caids ?

 

[brazzo39]

AW: Oscam configuration

Mal ein Tip am Rande:


Was passiert, wenn Du Deinem Client nur die Gruppe der lokalen Karte gibst?

alles gleich.... egal was ich einstelle....

 

[axel]

Kann ja nicht gleich sein...

Der Client hat ja nur noch eine Wahl -> lokale.

So ätzend wie das ist: nochmal nen Log ab Neutart posten.

 

[supraracer]

AW: Oscam configuration

Ohne Log lassen sich keine Fehler finden, ähnlich wie eine Autowerkstatt am Telefon keine Probleme lösen kann. Deshalb ist man nach 10 Postings auch noch so schlau wie zu Anfang.
Also mal ein Log posten wie schon gefordert, ab OScam Start bis Senderabfrage.

-supraracer

 

[brazzo39]

AW: Oscam configuration

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver log switched at Wed Sep 16 15:39:48 2015
-------------------------------------------------------------------------------
2015/09/16 15:39:48 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn-emu-, build r10943 (mipsel-unknown-linux-gnu)
2015/09/16 15:39:48 00000000 s (main) System name = Linux
2015/09/16 15:39:48 00000000 s (main) Host name = dm800sev2
2015/09/16 15:39:48 00000000 s (main) Release = 3.2-dm800sev2
2015/09/16 15:39:48 00000000 s (main) Version = #1 SMP Wed Mar 18 09:26:22 CET 2015
2015/09/16 15:39:48 00000000 s (main) Machine = mips
2015/09/16 15:39:48 00000000 s (main) Stb model = dm800sev2
2015/09/16 15:39:48 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5140
2015/09/16 15:39:48 00000000 s [Emu] oscam-emu version 716
2015/09/16 15:39:48 00000000 s (config) userdb reloaded: 12 accounts loaded, 0 expired, 0 disabled
2015/09/16 15:39:48 00000000 s (main) signal handling initialized
2015/09/16 15:39:48 00000000 s (config) 3 provid's loaded
2015/09/16 15:39:48 00000000 s (config) 16 service-id's loaded in 1 ms
2015/09/16 15:39:48 00000000 s (net) cccam: initialized (fd=5, port=xxxxx)
2015/09/16 15:39:48 00000000 s (reader) hd01 [internal] creating thread for device /dev/sci1
2015/09/16 15:39:48 00000000 s (reader) v14oben [internal] creating thread for device /dev/sci0
2015/09/16 15:39:48 5625A7F5 r (reader) v14oben [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/09/16 15:39:48 00000000 s (reader) [cccam] creating thread for device xxxxxxxxxxxxx
2015/09/16 15:39:48 5625A7F5 r (reader) v14oben [internal] Reader sci internal, detected box type: dm800sev2
2015/09/16 15:39:48 00000000 s (reader) [cccam] creating thread for device
2015/09/16 15:39:48 00000000 s (reader) [cccam] creating thread for device
2015/09/16 15:39:48 00000000 s (reader) emulator [emu] creating thread for device emulator
2015/09/16 15:39:48 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/09/16 15:39:48 00000000 s (main) waiting for local card init
2015/09/16 15:39:48 0E5701A8 r (reader) hd01 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
2015/09/16 15:39:48 0E5701A8 r (reader) hd01 [internal] Reader sci internal, detected box type: dm800sev2
2015/09/16 15:39:48 53B33046 h (webif) webif: decompressed 165535 bytes back into 395720 bytes
2015/09/16 15:39:48 53B33046 h (webif) HTTP Server running. ip=0.0.0.0 port=xxxxxxx
2015/09/16 15:39:48 0C3FD81E p (reader) : resolved ip=
2015/09/16 15:39:48 0C3FD81E p (reader) [cccam] connecting to
2015/09/16 15:39:48 708FB727 p (reader) : resolved ip=
2015/09/16 15:39:48 708FB727 p (reader) [cccam] connecting to
2015/09/16 15:39:48 73891561 r key file not found in: /etc/tuxbox/config
2015/09/16 15:39:48 73891561 r key file not found in: /var/keys
2015/09/16 15:39:48 73891561 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/09/16 15:39:48 12ECBD6C p (reader) chimera123.no-ip.org: resolved ip=
2015/09/16 15:39:48 12ECBD6C p (reader)
2015/09/16 15:39:48 0C3FD81E p (reader)
2015/09/16 15:39:48 12ECBD6C p (reader)
2015/09/16 15:39:49 708FB727 p (reader)
2015/09/16 15:39:49 73891561 r (reader) emulator [emu] card detected
2015/09/16 15:39:49 0E5701A8 r (reader) hd01 [internal] card detected
2015/09/16 15:39:49 5625A7F5 r (reader) v14oben [internal] card detected
2015/09/16 15:39:50 73891561 r (reader) emulator [emu] found card system emu
2015/09/16 15:39:50 73891561 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/09/16 15:39:50 73891561 r key file not found in: /etc/tuxbox/config
2015/09/16 15:39:50 73891561 r key file not found in: /var/keys
2015/09/16 15:39:51 5625A7F5 r (reader) v14oben [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/09/16 15:39:51 5625A7F5 r (reader) v14oben [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/09/16 15:39:51 5625A7F5 r (reader) v14oben [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/09/16 15:39:51 5625A7F5 r (reader) v14oben [internal] Buffers readed 0 bytes total time_us 75250
2015/09/16 15:39:51 0E5701A8 r (reader) hd01 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/09/16 15:39:51 0E5701A8 r (reader) hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/09/16 15:39:51 0E5701A8 r (reader) hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/09/16 15:39:51 0E5701A8 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 75205
2015/09/16 15:39:51 5625A7F5 r (reader) v14oben [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/09/16 15:39:52 0E5701A8 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/09/16 15:39:52 0E5701A8 r (reader) hd01 [internal] Card responded ok for ifsd request of 251
2015/09/16 15:39:52 5625A7F5 r (reader) v14oben [internal] Card type: P1TV
2015/09/16 15:39:52 5625A7F5 r (reader) v14oben [internal] Rom version: 20AA
2015/09/16 15:39:52 5625A7F5 r (reader) v14oben [internal] Credit available on card: 0 euro
2015/09/16 15:39:52 5625A7F5 r (reader) v14oben [internal] Extended 4C detected
2015/09/16 15:39:52 5625A7F5 r (reader) v14oben [internal] FuseByte: 00
2015/09/16 15:39:52 5625A7F5 r (reader) v14oben [internal] Region Code:
2015/09/16 15:39:52 5625A7F5 r (reader) v14oben [internal] Country Code: DEU
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [internal] Pincode read: xxxxxx
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [internal] PCB settings: FF FF FF FF
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [internal] ready for requests
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [internal] found card system videoguard2
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [videoguard2] card detected
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [videoguard2] ------------------------------------------------------------------
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [videoguard2] +---------+----------+---------------------+---------------------+
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [videoguard2] |------- This card is not active, so no package available! ------|
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [internal] detect native nagra card
2015/09/16 15:39:53 5625A7F5 r (reader) v14oben [videoguard2] ------------------------------------------------------from-ins70--
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [internal] ready for requests
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [internal] found card system nagra
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] ROM: D N A S P 1 4 2
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] REV: R e v G C 6
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] SER: ############
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] CAID: 1830
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] Prv.ID: 00 00 00 00
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] IRD ID: ############
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] active to: 2015/11/07 11:59
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] -----------------------------------------
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] |id |tier |valid from |valid to |
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] +----+--------+------------+------------+
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] |8011|0064 |2010/08/26 |2011/08/27 |
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] |8011|0BEA |2011/09/02 |2015/11/25 |
2015/09/16 15:39:53 0E5701A8 r (reader) hd01 [nagra] -----------------------------------------
2015/09/16 15:39:54 00000000 s (main) init for all local cards done
2015/09/16 15:39:54 00000000 s (emmcache) loaded 35 emmcache records from /tmp/.oscam/oscam.emmcache in 3 ms
2015/09/16 15:39:54 00000000 s (emmcache) loaded 35 emmstat records from /tmp/.oscam/oscam.emmstat in 2 ms
2015/09/16 15:39:54 00000000 s (anticasc) anti cascading disabled
2015/09/16 15:39:54 10C3D8A1 c (client) anonymous disconnected from
2015/09/16 15:39:54 498F5080 c (client) plain dvbapi-client granted (serverbox, au=auto (6 reader))
2015/09/16 15:39:54 5C5F4725 c (cccam) illegal username received
2015/09/16 15:39:54 5C5F4725 c (client) anonymous disconnected from
2015/09/16 15:39:54 03750C63 c (client) anonymous disconnected from
2015/09/16 15:39:54 6685627D c (client) anonymous disconnected from
2015/09/16 15:39:54 4D2C20C1 c (client) anonymous disconnected from
2015/09/16 15:39:54 4362E340 c (client) anonymous disconnected from
2015/09/16 15:39:54 498F5080 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2015/09/16 15:39:54 498F5080 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/09/16 15:39:54 498F5080 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2015/09/16 15:39:54 498F5080 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
2015/09/16 15:39:54 498F5080 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2015/09/16 15:39:54 498F5080 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
2015/09/16 15:39:54 498F5080 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2015/09/16 15:39:54 498F5080 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1FCC PROVID: 000000
2015/09/16 15:39:54 498F5080 c (dvbapi) Demuxer 0 found 6 ECMpids and 7 STREAMpids in PMT
2015/09/16 15:39:54 498F5080 c (dvbapi) Demuxer 0 serving srvid EF10 (RTL HD) on adapter 0000 camask 0008 index 0003 pmtpid 0060
2015/09/16 15:39:54 498F5080 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1ACC ANY CHID PMTPID 0060 VPID 00FF
2015/09/16 15:39:54 751004D7 c (client) encrypted cccam-client xxxxxxxxxxxxxx rejected (invalid access)
2015/09/16 15:39:54 751004D7 c (cccam) account 'hahn' not found!
2015/09/16 15:39:54 751004D7 c (client) anonymous disconnected from xxxxxxxxxxxx
2015/09/16 15:39:54 7F703756 c (client) encrypted cccam-client xxxxxxxxxxx rejected (invalid access)
2015/09/16 15:39:54 7F703756 c (cccam) account 'Pascal' not found!
2015/09/16 15:39:54 7F703756 c (client) anonymous disconnected from xxxxxxxxxxx
2015/09/16 15:39:54 5625A7F5 r (reader) v14oben [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/09/16 15:39:54 5625A7F5 r (reader) v14oben [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/09/16 15:39:54 5625A7F5 r (reader) v14oben [videoguard2] classD3 ins54: no cw --> No tier found
2015/09/16 15:39:54 5625A7F5 r (reader) v14oben [videoguard2] classD3 ins54: no cw --> Tier expired
2015/09/16 15:39:56 5A77CFFF c (client) anonymous disconnected from xxxxxxxxxxxxxx
2015/09/16 15:39:57 09B7B72E c (client) encrypted cccam-client xxxxxxxxxxxx rejected (invalid access)
2015/09/16 15:39:57 09B7B72E c (cccam) account 'Jens' not found!
2015/09/16 15:39:57 09B7B72E c (client) anonymous disconnected from xxxxxxxxxxxxxxx
2015/09/16 15:39:59 09EE3C0C c (client) encrypted cccam-client xxxxxxxxxxxxx rejected (invalid access)
2015/09/16 15:39:59 09EE3C0C c (cccam) account 'Robert' not found!
2015/09/16 15:39:59 09EE3C0C c (client) anonymous disconnected from xxxxxxxxxxxxx
2015/09/16 15:39:59 498F5080 c (ecm) serverbox (098C/EF10/98/0F06023020): timeout (5001 ms) by xxxxxxxxxxxxxxx (F/2/2/2) - RTL HD
2015/09/16 15:40:00 5625A7F5 r (reader) v14oben [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/09/16 15:40:00 5625A7F5 r (reader) v14oben [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/09/16 15:40:00 5625A7F5 r (reader) v14oben [videoguard2] classD3 ins54: no cw --> No tier found
2015/09/16 15:40:00 5625A7F5 r (reader) v14oben [videoguard2] classD3 ins54: no cw --> Tier expired
2015/09/16 15:40:01 498F5080 c (ecm) serverbox (098C/EF10/98/0F06000000): found (1627 ms) by xxxxxxxxxxxxxxxx (P/2/2/2) - RTL HD
2015/09/16 15:40:02 498F5080 c (ecm) serverbox (098C/EF10/98/0F06000000): found (2282 ms) by xxxxxxxxxxxxxxx (P/2/2/2) - RTL HD
2015/09/16 15:40:02 67743E91 c (client) encrypted cccam-client xxxxxxxxxx granted (Stipo, au=off)
2015/09/16 15:40:02 553BF7F6 c (client) encrypted cccam-client xxxxxxxxxxx granted (Matthias1, au=off)
2015/09/16 15:40:02 4C2FE1A6 c (client) encrypted cccam-client xxxxxxxxxxx granted (Duncan, au=off)
2015/09/16 15:40:03 1FDC0521 c (client) encrypted cccam-client xxxxxxxxxxx granted (Sebastian, au=off)
2015/09/16 15:40:03 473AF750 c (client) encrypted cccam-client xxxxxxxxxxx granted (Alberto, au=off)
2015/09/16 15:40:03 1D533696 c (client) encrypted cccam-client xxxxxxxxxxx granted (Kurt, au=off)

Das liegt bestimmt an der oscam.dvbapi, wenn ich sie so laufen lasse geht die HD+ Karte, mache ich P: 098C 1 wieder an gehn die HD Sender über den Share...



P: 1830
#P: 098C 1
I: 0

 

[hwmmc]

AW: Oscam configuration

Da musste mal die 1 hinter 098C wegnehmen, dann geht auch HD+ mit 1830.

 

[pehedima]

AW: Oscam configuration

Das hätte nur einen Einfluss, wenn die P Zeile mit der CAID 098C nicht auskommentiert wäre.
Es sei denn die Auskommentierung funzt in der oscam.dvbapi nicht.

Stell die mal so ein:

P: 1830
P: 098C
I: 0

Danach oscam neu starten und erneut testen.


Gesendet von meiner Handquetsche

 

[brazzo39]

AW: Oscam configuration

Ja es lag an der 1.....
Jetzt läuft die HD+ Karte