Oscam + Cccam + Freetz 7170 - S02 + HD02

[kfx]

Hi, ich bin gerade dabei mein System auf Cccam + Oscam umzustellen.
Freetz an der 7170 mit cccam 2.1.1,
OSCam-VERSION: v1.20-unstable_svn build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)

2 x Smargo mit einer S02 und einer HD02

oscam.conf

Spoiler

[global]
logfile = /var/media/ftp/system/logs/oscam.log
fallbacktimeout = 2000
failbantime = 5
cachedelay = 120
nice = -1
maxlogsize = 512
preferlocalcards = 1
saveinithistory = 1


[newcamd]
port = 34000@1702:000000;34001@1843:000000,003411,008011 #wenn eine HD02 genutzt wird, sollte der Caid 1843 lauten
key = 0102030405060708091011121314


[webif]
httpport = 48654
httphelplang = de
httpuser = admin
httppwd = xxx
httpallowed = 0.0.0.0-255.255.255.255 #mit dieser Einstellung ist es möglich von extern auf die OScam zuzugrefen
httphideidleclients = 1

oscam.server

Spoiler

# oscam.server



[reader]
label = skyde
protocol = mouse #wenn ihr ein USB-Reader nutzt, dann bitte auf mouse abändern
device = /dev/ttyUSB0 #bitte auf das entsprechende Pfad anpassen
caid = 1702,1833
detect = cd
mhz = 600
cardmhz = 600
ident = 1702:000000;1833:000000
group = 1
emmcache = 1,3,2


[reader]
label = hdplus
protocol = mouse #wenn ihr ein USB-Reader nutzt, dann bitte auf mouse abändern
device = /dev/ttyUSB1 #bitte auf das entsprechende Pfad anpassen
caid = 1843 #wenn eine HD02 genutzt wird, sollte der Caid 1843 lauten
rsakey = xxx
boxkey = xxx
detect = cd
mhz = 368
cardmhz = 368
ident = 1843:000000,003411,008011 #wenn eine HD02 genutzt wird, sollte der Caid 1843 lauten
group = 2
emmcache = 1,1,2

oscam.user

Spoiler

[account] user = usersky
pwd = passsky
group = 1
au = skyde
caid = 1702,1833
betatunnel = 1833.FFFF:1702


[account]
user = userhdplus
pwd = passhdplus
group = 2
au = hdplus
caid = 1843 #wenn eine HD02 genutzt wird, sollte der Caid 1843 lauten

In der cccam.cfg stehen die 2 N-Lines.

Wo müssen denn jetzt die Clienten hin? Bleiben die in der cccam.cfg oder müssen die in die oscam.user? Und bleibt in der cccam.cfg auch die Angabe zu den Readern, da diese ja auch in der oscam jetzt drin stehen?

Auf jeden Fall beendet sich die oscam einfach. Ich starte es und 2 Minuten später steht wieder "stopped" da.
Was mache ich falsch? Das webif bekomme ich auch nicht auf, da sich die oscam ja immer beendet.

ist das der oscam-log?

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:28:53 2000
-------------------------------------------------------------------------------
2000/01/01 01:28:53 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2000/01/01 01:28:53 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
2000/01/01 01:28:53 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 01:28:53 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2000/01/01 01:28:53 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 01:28:53 0 s The current system time is smaller than the build date (Nov 17 2012). Waiting up to 60 seconds for time to correct
2000/01/01 01:29:55 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:29:55 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2000/01/01 01:29:55 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:29:55 0 s signal handling initialized (type=sysv)
2000/01/01 01:29:55 0 s 116 service-id's loaded in 17ms
2000/01/01 01:29:55 0 s 116 tier-id's loaded
2000/01/01 01:29:55 0 s 3 provid's loaded
2000/01/01 01:29:55 0 s 22 lengths for caid guessing loaded
2000/01/01 01:29:55 0 s ERROR: Cannot open file "/var/media/ftp/system/service/oscam//oscam.whitelist" (errno=2 No such file or directory)
2000/01/01 01:29:55 0 s ERROR: Cannot open file "/var/media/ftp/system/service/oscam//oscam.cacheex" (errno=2 No such file or directory)
2000/01/01 01:29:55 0 s Starting listener 0
2000/01/01 01:29:55 0 s monitor: disabled
2000/01/01 01:29:55 0 s Starting listener 0
2000/01/01 01:29:55 0 s camd33: disabled
2000/01/01 01:29:55 0 s Starting listener 0
2000/01/01 01:29:55 0 s camd35: disabled
2000/01/01 01:29:55 0 s Starting listener 0
2000/01/01 01:29:55 0 s cs378x: disabled
2000/01/01 01:29:55 0 s Starting listener 0
2000/01/01 01:29:55 0 s newcamd: initialized (fd=7, port=34000, crypted)
2000/01/01 01:29:55 0 s -> CAID: 1702 PROVID: 000000
2000/01/01 01:29:55 0 s Starting listener 1
2000/01/01 01:29:55 0 s newcamd: initialized (fd=8, port=34001, crypted)
2000/01/01 01:29:55 0 s -> CAID: 1843 PROVID: 000000, 003411, 1F1F1F, 1F1F1F
2000/01/01 01:29:55 0 s Starting listener 0
2000/01/01 01:29:55 0 s pandora: disabled
2000/01/01 01:29:55 0 s Starting listener 0
2000/01/01 01:29:55 0 s csp: disabled
2000/01/01 01:29:55 0 s Starting listener 0
2000/01/01 01:29:55 0 s radegast: disabled
2000/01/01 01:29:55 0 s starting thread http


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:37:14 2000
-------------------------------------------------------------------------------
2000/01/01 01:37:14 0 s starting thread log_list_thread
2000/01/01 01:37:14 0 s log_list_thread thread started
2000/01/01 01:37:14 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2000/01/01 01:37:14 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
2000/01/01 01:37:14 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 01:37:14 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2000/01/01 01:37:14 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 01:37:14 0 s The current system time is smaller than the build date (Nov 17 2012). Waiting up to 60 seconds for time to correct
2000/01/01 01:38:15 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:38:15 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2000/01/01 01:38:15 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:38:15 0 s signal handling initialized (type=sysv)
2000/01/01 01:38:15 0 s 116 service-id's loaded in 47ms
2000/01/01 01:38:15 0 s 116 tier-id's loaded
2000/01/01 01:38:15 0 s 3 provid's loaded
2000/01/01 01:38:15 0 s 22 lengths for caid guessing loaded
2000/01/01 01:38:15 0 s ERROR: Cannot open file "/var/media/ftp/system/service/oscam//oscam.whitelist" (errno=2 No such file or directory)
2000/01/01 01:38:15 0 s ERROR: Cannot open file "/var/media/ftp/system/service/oscam//oscam.cacheex" (errno=2 No such file or directory)
2000/01/01 01:38:15 0 s Starting listener 0
2000/01/01 01:38:15 0 s monitor: disabled
2000/01/01 01:38:15 0 s Starting listener 0
2000/01/01 01:38:15 0 s camd33: disabled
2000/01/01 01:38:15 0 s Starting listener 0
2000/01/01 01:38:15 0 s camd35: disabled
2000/01/01 01:38:15 0 s Starting listener 0
2000/01/01 01:38:15 0 s cs378x: disabled
2000/01/01 01:38:15 0 s Starting listener 0
2000/01/01 01:38:15 0 s newcamd: initialized (fd=7, port=34000, crypted)
2000/01/01 01:38:15 0 s -> CAID: 1702 PROVID: 000000
2000/01/01 01:38:15 0 s Starting listener 1
2000/01/01 01:38:15 0 s newcamd: initialized (fd=8, port=34001, crypted)
2000/01/01 01:38:15 0 s -> CAID: 1843 PROVID: 000000, 003411, 1F1F1F, 1F1F1F
2000/01/01 01:38:15 0 s Starting listener 0
2000/01/01 01:38:15 0 s pandora: disabled
2000/01/01 01:38:15 0 s Starting listener 0
2000/01/01 01:38:15 0 s csp: disabled
2000/01/01 01:38:15 0 s Starting listener 0
2000/01/01 01:38:15 0 s radegast: disabled
2000/01/01 01:38:15 0 s starting thread http
2000/01/01 01:38:15 0 s http thread started
2000/01/01 01:38:15 0 s starting thread reader check
2000/01/01 01:38:15 0 s reader check thread started
2000/01/01 01:38:15 0 s starting thread check
2000/01/01 01:38:15 0 s check thread started
2000/01/01 01:38:15 0 s hdplus [unknown] creating thread for device /dev/sci1 #bitte auf das entsprechende Pfad anpassen
2000/01/01 01:38:15 0 s loadbalancer: can't read from file /tmp/.oscam/stat


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:01:21 2000
-------------------------------------------------------------------------------
2000/01/01 01:01:21 0 s starting thread log_list_thread
2000/01/01 01:01:21 0 s log_list_thread thread started
2000/01/01 01:01:21 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2000/01/01 01:01:21 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
2000/01/01 01:01:21 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 01:01:21 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2000/01/01 01:01:21 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 01:01:21 0 s The current system time is smaller than the build date (Nov 17 2012). Waiting up to 60 seconds for time to correct
2000/01/01 01:02:22 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:02:25 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2000/01/01 01:02:25 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:02:25 0 s signal handling initialized (type=sysv)
2000/01/01 01:02:25 0 s 116 service-id's loaded in 114ms
2000/01/01 01:02:25 0 s 116 tier-id's loaded
2000/01/01 01:02:25 0 s 3 provid's loaded
2000/01/01 01:02:26 0 s 22 lengths for caid guessing loaded


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:05:11 2000
-------------------------------------------------------------------------------
2000/01/01 01:05:11 0 s starting thread log_list_thread
2000/01/01 01:05:11 0 s log_list_thread thread started
2000/01/01 01:05:11 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2000/01/01 01:05:11 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
2000/01/01 01:05:11 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 01:05:11 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2000/01/01 01:05:11 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 01:05:11 0 s The current system time is smaller than the build date (Nov 17 2012). Waiting up to 60 seconds for time to correct
2000/01/01 01:06:12 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:06:12 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:10:33 2000
-------------------------------------------------------------------------------
2000/01/01 01:10:33 0 s starting thread log_list_thread
2000/01/01 01:10:33 0 s log_list_thread thread started
2000/01/01 01:10:33 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2000/01/01 01:10:33 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
2000/01/01 01:10:33 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 01:10:33 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2000/01/01 01:10:33 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 01:10:33 0 s The current system time is smaller than the build date (Nov 17 2012). Waiting up to 60 seconds for time to correct
2000/01/01 01:11:35 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:11:35 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:16:21 2000
-------------------------------------------------------------------------------
2000/01/01 01:16:21 0 s starting thread log_list_thread
2000/01/01 01:16:21 0 s log_list_thread thread started
2000/01/01 01:16:21 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2000/01/01 01:16:21 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
2000/01/01 01:16:21 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 01:16:21 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2000/01/01 01:16:21 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 01:16:21 0 s The current system time is smaller than the build date (Nov 17 2012). Waiting up to 60 seconds for time to correct
2000/01/01 01:17:23 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:17:23 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2000/01/01 01:17:23 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:17:23 0 s signal handling initialized (type=sysv)


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:24:42 2000
-------------------------------------------------------------------------------
2000/01/01 01:24:42 0 s starting thread log_list_thread
2000/01/01 01:24:42 0 s log_list_thread thread started
2000/01/01 01:24:42 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2000/01/01 01:24:42 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
2000/01/01 01:24:42 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 01:24:42 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2000/01/01 01:24:42 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 01:24:42 0 s The current system time is smaller than the build date (Nov 17 2012). Waiting up to 60 seconds for time to correct


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:27:29 2000
-------------------------------------------------------------------------------
2000/01/01 01:27:29 0 s starting thread log_list_thread
2000/01/01 01:27:29 0 s log_list_thread thread started
2000/01/01 01:27:29 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2000/01/01 01:27:29 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
2000/01/01 01:27:29 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 01:27:29 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2000/01/01 01:27:29 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 01:27:29 0 s The current system time is smaller than the build date (Nov 17 2012). Waiting up to 60 seconds for time to correct
2000/01/01 01:28:30 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:28:30 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2000/01/01 01:28:30 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:28:30 0 s signal handling initialized (type=sysv)


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:31:33 2000
-------------------------------------------------------------------------------
2000/01/01 01:31:33 0 s starting thread log_list_thread
2000/01/01 01:31:33 0 s log_list_thread thread started
2000/01/01 01:31:33 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2000/01/01 01:31:33 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
2000/01/01 01:31:33 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 01:31:33 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2000/01/01 01:31:33 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 01:31:33 0 s The current system time is smaller than the build date (Nov 17 2012). Waiting up to 60 seconds for time to correct
2000/01/01 01:32:35 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:32:35 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2000/01/01 01:32:35 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:32:35 0 s signal handling initialized (type=sysv)

Abschließend die Frage, was muss als startendes Cam bei dem usb2serial eingestellt sein? Oscam oder cccam?

Danke

 

[NeroZ]

AW: Oscam startet kurz und beendet sich dann wieder

moin,

überall die einträge hinter dem # löschen, kann probleme machen

zB
protocol = mouse #wenn ihr ein USB-Reader nutzt, dann bitte auf mouse abändern

rote löschen

 

[kfx]

Habe ich jetzt gemacht. Dachte erst es geht, dann musste ich die cccam nochmal neu starten und dann war die scam wieder stopped

Jetzt komme ich in das Webif rein. Fehlermeldungen hier:

Spoiler

2000/01/01 02:09:47 59A158 r skyde [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:47 59A158 r skyde [mouse] Error getting card status.
2000/01/01 02:09:47 59BA18 r hdplus [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:47 59BA18 r hdplus [mouse] Error getting card status.
2000/01/01 02:09:48 59A158 r skyde [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:48 59A158 r skyde [mouse] Error getting card status.
2000/01/01 02:09:48 59BA18 r hdplus [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:48 59BA18 r hdplus [mouse] Error getting card status.
2000/01/01 02:09:49 59A158 r skyde [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:49 59A158 r skyde [mouse] Error getting card status.
2000/01/01 02:09:49 59BA18 r hdplus [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:49 59BA18 r hdplus [mouse] Error getting card status.
2000/01/01 02:09:50 59A158 r skyde [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:50 59A158 r skyde [mouse] Error getting card status.
2000/01/01 02:09:50 59BA18 r hdplus [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:50 59BA18 r hdplus [mouse] Error getting card status.
2000/01/01 02:09:51 59A158 r skyde [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:51 59A158 r skyde [mouse] Error getting card status.
2000/01/01 02:09:51 59BA18 r hdplus [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:51 59BA18 r hdplus [mouse] Error getting card status.
2000/01/01 02:09:52 59A158 r skyde [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:52 59A158 r skyde [mouse] Error getting card status.
2000/01/01 02:09:52 59BA18 r hdplus [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:52 59BA18 r hdplus [mouse] Error getting card status.
2000/01/01 02:09:53 59A158 r skyde [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:53 59A158 r skyde [mouse] Error getting card status.
2000/01/01 02:09:53 59BA18 r hdplus [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:53 59BA18 r hdplus [mouse] Error getting card status.
2000/01/01 02:09:54 59A158 r skyde [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:54 59A158 r skyde [mouse] Error getting card status.
2000/01/01 02:09:54 59BA18 r hdplus [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:54 59BA18 r hdplus [mouse] Error getting card status.
2000/01/01 02:09:55 59A158 r skyde [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:55 59A158 r skyde [mouse] Error getting card status.
2000/01/01 02:09:55 59BA18 r hdplus [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:55 59BA18 r hdplus [mouse] Error getting card status.
2000/01/01 02:09:56 59A158 r skyde [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:56 59A158 r skyde [mouse] Error getting card status.
2000/01/01 02:09:56 59BA18 r hdplus [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2000/01/01 02:09:56 59BA18 r hdplus [mouse] Error getting card status.​

 

[Barni2001]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Du musst auf jeden fall die Readereinträge aus der Cccam rausmachen(#) das kann ja so nicht gehen wenn Oscam die Karten lesen soll! Mit den Usern würde ich alle in die Oscam User reinmachen,kannste aber auch in die Cccam eintragen. Denn im Freetz noch den ftdi_so Treiber laden - haken rein.
viel Erfolg

 

[kfx]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Habe ich jetzt auch schon gemacht mit den Readereinträgen.

Ok, dann lasse ich sie in der Cccam die Clienten. Und welches cam soll geladen werden bei dem ftdi_so Treiber?

Und bei Oscam-Starttyp was nehme ich da? Mouse, Smartreader oder Smargo?

Auf Smartreader stehe ich jetzt, aber da passiert ja nichts. Sind aber 2 Smartreader. Einer von Maxdigital und einer Argolis

 

[Barni2001]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

versuch mal mouse und dann machste noch bei den oscam.servern " smargopatch = 1 " rein . Du musst auch nach jeder Änderung ein reboot der ganzen Fritzbox machen.

 

[Pilot]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Hast dieses Wirklich gemacht:
Du musst auf jeden fall die Readereinträge aus der Cccam rausmachen(#) das kann ja so nicht gehen wenn Oscam die Karten lesen soll!
In ccam darf kein Readereinterag stehen. Grund; cccam ist so fies und klaut oscam die reader Daten, wenn es vor odsam startet.


Mlgb piloten

 

[kfx]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Ja piloten, habe ich gemacht. Was darf denn in der cccam.cfg nur noch drin stehen?

Die F-Lines für die Clienten lass ich da drin?

 

[Pilot]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Nur eine N-Line aus dem oscam Configs heraus und F-Lines aus für die clienten.
Noch besser: alles ohne cccam.
Das packt osam allein mit cccam Prototokoll: HowTo F-Lines in OScam.user erzeugen

Mlg piloten

 

[kfx]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Wie jetzt? Eine N-Line raus aus der cccam.cfg? das sind doch aber jeweils eine für die Karten!! Also so:

N: 127.0.0.1 34000 usersky passsky 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 34001 userhdplus passhdplus 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Ohne cccam? Können dann clienten mit cccam trotzdem zugreifen?

 

[Pilot]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Na klar: mit dem cccam Protokoll merken deine cccam Clienten überhaut nichts von der Umstellung.
Im Camm Protokkol seerverlisten Port aus der ehemaligen cccam.cfg eintragen.
F Lines = accounts.
Bttite dein Eintrage in Link gründlich lesen.

cccam stoppen.

Mlg piloten

 

[kfx]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Ok, habe ich jetzt mal gemacht und starte neu...

 

[Barni2001]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Genau so geht datt. Aber bevor du dich um deine Clienten Sorgen machst ,solltest du gucken das deine Karten vernünftig erkannt werden und laufen!

 

[kfx]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Naja das meine ich ja! Deshalb habe ich extra vorhin alles gepostet, aber da ist keiner darauf eingegangen. Jetzt ist die Box wieder oben, jedoch bleibt es dunkel :emoticon-0106-cryin

Nochmal zum mitschreiben:

Jetzt ist nur noch oscam aktiv.

oscam.conf

Spoiler

[global]

Spoiler

logfile = /var/media/ftp/system/logs/oscam.log
fallbacktimeout = 2000
failbantime = 5
cachedelay = 120
nice = -1
maxlogsize = 512
preferlocalcards = 1
saveinithistory = 1


[newcamd]
port = 34000@1702:000000;34001@1843:000000,003411,008011
key = 0102030405060708091011121314


[webif]
httpport = 48654
httphelplang = de
httpuser = admin
httppwd = xxx
httpallowed = 0.0.0.0-255.255.255.255
httphideidleclients = 1


[cccam]
port = 12000
reshare = 1
ignorereshare = 0
version = 2.2.1
reshare_mode = 0

oscam.server

Spoiler

# oscam.server

Spoiler

[reader]
label = skyde
protocol = mouse
device = /dev/ttyUSB0
caid = 1702,1833
detect = cd
mhz = 600
cardmhz = 600
ident = 1702:000000;1833:000000
group = 1
emmcache = 1,3,2
smargopatch = 1




[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB1
caid = 1843
rsakey = BFxxxD5
boxkey = A7xxx7C
detect = cd
mhz = 368
cardmhz = 368
ident = 1843:000000,003411,008011
group = 2
emmcache = 1,1,2
smargopatch = 1

oscam.user

Spoiler

[account]

Spoiler

user = dream800
pwd = dreambox
group = 1

oscam starttyp ist Automatisch
Protokoll, mit welchem OSCam die Karte lesen soll: Mouse
usb2serial: Hier die oscam ausgewählt

so sieht es jetzt im Webif der oscam aus:

Sie müssen registriert sein, um Links zu sehen.

Irgendwie spinnt das Forum mit diesen doppelten Spoilern. ich habe es jetzt schon zum 3. mal korrigiert und jedes mal macht der es wieder...

 

[Pilot]

AW: Oscam + Cccam + Freetz 7170 - S02 + HD02

Deine beiden Abo Karten werden nicht richtig gelesen.
cccam ist wirklich gestoppt. Am Besten auf manuell starten einstellen.

Zeig bite den Logauszug Von Anfang an. Ddas heißt oscam neu starten und dann den Logauszig von Anfang an.
Noch brsser: Fritzbox neu booten und dann den Logauszug


Mlg piloten