Oscam Binary Update am Server

[Keksfresser]

Hallo,
sobald ich die Oscam in usr/bin tausche (Name auf Originalname und Rechte auf 755 geändert) wird es dunkel.
Aktiviere ich die Oscam vom Feed wieder wird es direkt wieder hell.

Server ist eine Spark One (Sh4) mit I12 auf Kabel Unitymedia.

Spoiler: Log

• 2017/01/07 15:44:12 00000000 s (main) System name = Linux
• 2017/01/07 15:44:12 00000000 s (main) Host name = sparkone
• 2017/01/07 15:44:12 00000000 s (main) Release = 2.6.32.61_stm24_0217
• 2017/01/07 15:44:12 00000000 s (main) Version = #1 PREEMPT Sat Nov 12 00:15:23 CET 2016
• 2017/01/07 15:44:12 00000000 s (main) Machine = sh4
• 2017/01/07 15:44:12 00000000 s (main) Stb model = spark7162
• 2017/01/07 15:44:12 00000000 s (main) Stb boxtype = spark7162
• 2017/01/07 15:44:12 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1427
• 2017/01/07 15:44:12 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2017/01/07 15:44:12 00000000 s (main) signal handling initialized
• 2017/01/07 15:44:12 00000000 s (net) cs357x: initialized (fd=4, port=12345)
• 2017/01/07 15:44:12 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
• 2017/01/07 15:44:12 00000000 s (reader) Sky [internal] creating thread for device /dev/sci0
• 2017/01/07 15:44:12 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2017/01/07 15:44:12 00000000 s (main) waiting for local card init
• 2017/01/07 15:44:12 29499186 r (reader) Sky [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
• 2017/01/07 15:44:12 29499186 r (reader) Sky [internal] Reader sci internal, detected box type: spark7162
• 2017/01/07 15:44:12 1D79154E h (webif) webif: decompressed 165773 bytes back into 399696 bytes
• 2017/01/07 15:44:12 1D79154E h (webif) HTTP Server running. ip=:: port=16000
• 2017/01/07 15:44:13 29499186 r (reader) Sky [internal] card detected
• 2017/01/07 15:44:17 29499186 r (reader) Sky [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
• 2017/01/07 15:44:17 29499186 r (reader) Sky [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
• 2017/01/07 15:44:17 29499186 r (reader) Sky [internal] Calculated work ETU is 93.00 us reader mhz = 600
• 2017/01/07 15:44:17 29499186 r (reader) Sky [internal] Buffers readed 0 bytes total time_us 79403
• 2017/01/07 15:44:18 29499186 r (reader) Sky [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
• 2017/01/07 15:44:19 29499186 r (reader) Sky [internal] detect irdeto tunneled nagra card
• 2017/01/07 15:44:19 29499186 r (reader) Sky [internal] no rsa key configured -> using irdeto mode
• 2017/01/07 15:44:19 29499186 r (reader) Sky [internal] detect irdeto card
• 2017/01/07 15:44:19 29499186 r (reader) Sky [internal] card system not supported
• 2017/01/07 15:44:19 29499186 r (reader) Sky [internal] Normal mode failed, reverting to Deprecated Mode
• 2017/01/07 15:44:23 29499186 r (reader) Sky [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
• 2017/01/07 15:44:23 29499186 r (reader) Sky [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
• 2017/01/07 15:44:23 29499186 r (reader) Sky [internal] Calculated work ETU is 74.40 us reader mhz = 500
• 2017/01/07 15:44:23 29499186 r (reader) Sky [internal] Buffers readed 0 bytes total time_us 79395
• 2017/01/07 15:44:24 29499186 r (reader) Sky [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2017/01/07 15:44:25 29499186 r (reader) Sky [internal] detect irdeto tunneled nagra card
• 2017/01/07 15:44:25 29499186 r (reader) Sky [internal] no rsa key configured -> using irdeto mode
• 2017/01/07 15:44:25 29499186 r (reader) Sky [internal] detect irdeto card
• 2017/01/07 15:44:32 29499186 r (reader) Sky [internal] card system not supported
• 2017/01/07 15:44:32 29499186 r (reader) Sky [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/01/07 15:44:32 29499186 r (reader) Sky [internal] card initializing error
• 2017/01/07 15:44:33 00000000 s (main) init for all local cards done
• 2017/01/07 15:44:33 53C7BE15 c (client) plain dvbapi-client granted (local, au=auto (1 reader))
• 2017/01/07 15:44:33 53C7BE15 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 27 (oscam limit is 32)
• 2017/01/07 15:44:33 53C7BE15 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1850 ECM_PID: 195A PROVID: 000000
• 2017/01/07 15:44:33 53C7BE15 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1722 ECM_PID: 1A5A PROVID: 000000
• 2017/01/07 15:44:33 53C7BE15 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1835 ECM_PID: 1B5A PROVID: 000000
• 2017/01/07 15:44:33 53C7BE15 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1838 ECM_PID: 1C5A PROVID: 000000
• 2017/01/07 15:44:33 53C7BE15 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1831 ECM_PID: 1D5A PROVID: 000000
• 2017/01/07 15:44:33 53C7BE15 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 098E ECM_PID: 1E5A PROVID: 000000
• 2017/01/07 15:44:33 53C7BE15 c (dvbapi) Demuxer 0 found 6 ECMpids and 4 STREAMpids in caPMT
• 2017/01/07 15:44:33 53C7BE15 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2017/01/07 15:44:33 53C7BE15 c (dvbapi) Demuxer 0 found 6 ECMpids and 4 STREAMpids in PMT
• 2017/01/07 15:44:38 53C7BE15 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2017/01/07 15:45:53 53C7BE15 c (-) -- Skipped 14 duplicated log lines --
• 2017/01/07 15:46:53 53C7BE15 c (-) -- Skipped 12 duplicated log lines --
• 2017/01/07 15:47:54 53C7BE15 c (-) -- Skipped 12 duplicated log lines --

Spoiler: Oscam.version aus dem Webif

Unix starttime: 1483781131
Starttime: 07.01.2017 10:25:31
Version: oscam-1.20-unstable_svn-r11297
Compiler: sh4-streamboard-linux-gnu-stapi-libusb
Box type: spark7162 (generic)
PID: 1738
TempDir: /tmp/.oscam
ConfigDir: /usr/keys/oscam_cable/
WebifPort: 16000

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: yes
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: no
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: no
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: no
radegast: no
scam: yes
serial: no
constant CW: yes
Pandora: no
ghttp: no

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: no - no EMM support!
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: yes
cardreader_stapi5: no
cardreader_stinger: no

Spoiler: Meine Configs:

oscam.conf
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
saveinithistory = 1
PreferLocalCards = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
request_mode = 0

[cs357x]
Port = 12345

[webif]
httpport = 16000
httpuser = oscam
httppwd = oscam
appendchaninfo = 1
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
maxlogsize = 1000


oscam.server
[reader]
label = Sky
enable = 1
protocol = internal
detect = cd
device = /dev/sci0
group = 1
caid = 1722,1835
EMMCache = 1,3,2
disableserverfilter = 1

oscam.user
[account]
user = local
pwd =
group = 1,2
monlevel = 2
au = 1

Ich sehe zwar das der Log Fehler zeigt aber kann damit nichts angangen.

Kann mir da jemand helfen?

 

[dodo83]

setze mal CARDMHZ auf 2700 testweise und starte neu,
laut log wird die Karte nicht eingelesen,
welche Version läuft vom Feed?

 

[Keksfresser]

oscam.server um "cardmhz = 2700" ergänzt. Keine Auswirkung.

Spoiler: Neue Log

• 2017/01/07 16:54:59 00000000 s (main) System name = Linux
• 2017/01/07 16:54:59 00000000 s (main) Host name = sparkone
• 2017/01/07 16:54:59 00000000 s (main) Release = 2.6.32.61_stm24_0217
• 2017/01/07 16:54:59 00000000 s (main) Version = #1 PREEMPT Sat Nov 12 00:15:23 CET 2016
• 2017/01/07 16:54:59 00000000 s (main) Machine = sh4
• 2017/01/07 16:54:59 00000000 s (main) Stb model = spark7162
• 2017/01/07 16:54:59 00000000 s (main) Stb boxtype = spark7162
• 2017/01/07 16:54:59 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 15212
• 2017/01/07 16:54:59 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2017/01/07 16:54:59 00000000 s (main) signal handling initialized
• 2017/01/07 16:54:59 00000000 s (net) cs357x: initialized (fd=4, port=12007)
• 2017/01/07 16:54:59 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
• 2017/01/07 16:54:59 00000000 s (reader) Sky [internal] creating thread for device /dev/sci0
• 2017/01/07 16:54:59 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2017/01/07 16:54:59 00000000 s (main) waiting for local card init
• 2017/01/07 16:54:59 09CFE484 r (reader) Sky [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
• 2017/01/07 16:54:59 09CFE484 r (reader) Sky [internal] Reader sci internal, detected box type: spark7162
• 2017/01/07 16:54:59 0D4C0664 h (webif) webif: decompressed 165773 bytes back into 399696 bytes
• 2017/01/07 16:54:59 0D4C0664 h (webif) HTTP Server running. ip=:: port=16000
• 2017/01/07 16:55:00 09CFE484 r (reader) Sky [internal] card detected
• 2017/01/07 16:55:03 09CFE484 r (reader) Sky [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
• 2017/01/07 16:55:03 09CFE484 r (reader) Sky [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
• 2017/01/07 16:55:03 09CFE484 r (reader) Sky [internal] Calculated work ETU is 93.00 us reader mhz = 600
• 2017/01/07 16:55:03 09CFE484 r (reader) Sky [internal] Buffers readed 0 bytes total time_us 79270
• 2017/01/07 16:55:04 09CFE484 r (reader) Sky [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
• 2017/01/07 16:55:05 09CFE484 r (reader) Sky [internal] detect irdeto tunneled nagra card
• 2017/01/07 16:55:05 09CFE484 r (reader) Sky [internal] no rsa key configured -> using irdeto mode
• 2017/01/07 16:55:05 09CFE484 r (reader) Sky [internal] detect irdeto card
• 2017/01/07 16:55:06 09CFE484 r (reader) Sky [internal] card system not supported
• 2017/01/07 16:55:06 09CFE484 r (reader) Sky [internal] Normal mode failed, reverting to Deprecated Mode
• 2017/01/07 16:55:10 09CFE484 r (reader) Sky [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
• 2017/01/07 16:55:10 09CFE484 r (reader) Sky [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
• 2017/01/07 16:55:10 09CFE484 r (reader) Sky [internal] Calculated work ETU is 74.40 us reader mhz = 500
• 2017/01/07 16:55:10 09CFE484 r (reader) Sky [internal] Buffers readed 0 bytes total time_us 82165
• 2017/01/07 16:55:11 09CFE484 r (reader) Sky [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2017/01/07 16:55:12 09CFE484 r (reader) Sky [internal] detect irdeto tunneled nagra card
• 2017/01/07 16:55:12 09CFE484 r (reader) Sky [internal] no rsa key configured -> using irdeto mode
• 2017/01/07 16:55:12 09CFE484 r (reader) Sky [internal] detect irdeto card
• 2017/01/07 16:55:19 09CFE484 r (reader) Sky [internal] card system not supported
• 2017/01/07 16:55:19 09CFE484 r (reader) Sky [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/01/07 16:55:19 09CFE484 r (reader) Sky [internal] card initializing error
• 2017/01/07 16:55:19 00000000 s (main) init for all local cards done
• 2017/01/07 16:55:19 45DC88E5 c (client) plain dvbapi-client granted (local, au=auto (1 reader))
• 2017/01/07 16:55:19 45DC88E5 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 27 (oscam limit is 32)
• 2017/01/07 16:55:21 45DC88E5 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1850 ECM_PID: 195A PROVID: 000000
• 2017/01/07 16:55:21 45DC88E5 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1722 ECM_PID: 1A5A PROVID: 000000
• 2017/01/07 16:55:21 45DC88E5 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1835 ECM_PID: 1B5A PROVID: 000000
• 2017/01/07 16:55:21 45DC88E5 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1838 ECM_PID: 1C5A PROVID: 000000
• 2017/01/07 16:55:21 45DC88E5 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1831 ECM_PID: 1D5A PROVID: 000000
• 2017/01/07 16:55:21 45DC88E5 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 098E ECM_PID: 1E5A PROVID: 000000
• 2017/01/07 16:55:21 45DC88E5 c (dvbapi) Demuxer 0 found 6 ECMpids and 3 STREAMpids in caPMT
• 2017/01/07 16:55:21 45DC88E5 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2017/01/07 16:55:21 45DC88E5 c (dvbapi) Demuxer 0 found 6 ECMpids and 3 STREAMpids in PMT
• 2017/01/07 16:55:25 45DC88E5 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2017/01/07 16:56:40 45DC88E5 c (-) -- Skipped 14 duplicated log lines --

 

[dodo83]

• 2017/01/07 16:54:59 09CFE484 r (reader) Sky [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)

laut log ist MHZ und CARDMHZ auf 357

 

[Keksfresser]

Oops, hatte geändert aber nicht rübergeschoben.

Heureka, es läuft. Vielen Dank!

An mhz und cardmhz hatte ich auch schon gedacht aber nicht wirklich was zielführendes gefunden. Scheinbar betreibt jeder seine I12 mit anderen Mhz, viel mit 357 oder 600.
Dann habe ich in der Wiki gelesen das 2700 cardmhz nur bei Boxen mit Mips Anwendung findet.

Da ich das sehr gerne verstehen würde wäre ich dir dankbar wenn du das kurz erklären könntest oder mich auf eine Erklärung (für Nichtprofis) verweisen könntest.

Nochmals vielen Dank