Oscam auf VU+ Solo 4K - Hilfe benötigt

[global]
logfile = /var/log/oscam.log
maxlogsize = 256
nice = -1
preferlocalcards = 1
fallbacktimeout = 2500
ecmfmt = c/s/l/y
# y zeigt payload, erst ab oscam ca 10830, sonst y entfernen
#kein emmlogdir >>> emmlogs im oscam config ordner

[cccam]
port = 33333
version = 2.3.0
reshare = 1
ignorereshare = 0

[dvbapi]
enabled = 1
au = 1
read_sdt = 2
write_sdt_prov = 1
user = serverbox
boxtype = dreambox

[webif]
httpport = 17000
httpuser =
httppwd =
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
http_status_log = 1

# nur bei Receivern mit oscam zu verwenden, hilfreich aber nicht zwingend notwendig
# hier zeilenweise die caid der karten und proxy reader aus oscam.server eintragen
# P: bedeutet Priorisieren, die abarbeitung der sender caid beginnt mit der 1. zeile
# bei der senderabfrage am server wird zuerst
# die caid 1830 zur entschluesselung versucht und die zugehörige karte gelesen, danach erst 098C
# beispiel, bitte unbedingt vor dem kopieren bearbeiten !!!!!! # vor P und I entfernen !!!
#
# P: 0D05
P: 1830
# P: 1843
# P: 09C4
P: 098C
I: 0
#
# zb wird mit I: 1722 die caid 1722 ausgeschlossen (Ignore), mit 0 dann alle, die nicht bei P: stehen
# diese datei wird zu den anderen oscam configs kopiert, bei änderungen oscam neu starten
#
### >>> gleiche funktion erhält man für cccam clients mit CCcam.prio <<<

[reader]
label = hd01
description = HD+weiss
enable = 0
protocol = internal
device = /dev/sci1
services = hd01
caid = 1830
boxkey = A...C
rsakey = B...5
detect = cd
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2

[reader]
label = hd02
description = HD+schwarz
enable = 0
protocol = internal
device = /dev/sci1
services = hd02
caid = 1843
boxkey = A...C
rsakey = B...5
detect = cd
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2

[reader]
label = v13oben
description = V13-Sky
enable = 0
protocol = internal
device = /dev/sci0
services = sky_v13,v13hdplus
caid = 09C4
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
fix07 = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

[reader]
label = v14oben
description = V14-Sky
enable = 1
protocol = internal
device = /dev/sci0
services = sky_v14,v14hdplus
caid = 098C
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
fix07 = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

[reader]
label = v13unten
description = V13-Sky
enable = 0
protocol = internal
device = /dev/sci1
services = sky_v13,v13hdplus
caid = 09C4
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
fix07 = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

[reader]
label = v14unten
description = V14-Sky
enable = 1
protocol = internal
device = /dev/sci1
services = sky_v14,v14hdplus
caid = 098C
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
fix07 = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

# das ist die oscam "c-line" analog zur cccam c-line
# dort nur dyndns,port (oder lokale_serverip,port) sowie user und pass eintragen
[reader]
label = cline_1
description = erhaltene_c-line_vom_server1
enable = 0
protocol = cccam
device = serverdyndns_serverip,serverport
user = c_line_user
password = c_line_pass
group = 2
cccversion = 2.3.0
ccckeepalive = 1
blockemm-unknown = 1
#blockemm-s = 1
#blockemm-g = 1
#saveemm-u = 1

[account]
user = serverbox
au = 1
group = 1,2
cccignorereshare = 0

[account]
user = client1
pwd = pass1
uniq = 3
keepalive = 1
group = 1,2
cccreshare = 0
cccignorereshare = 0

[account]
user = client2
pwd = pass2
uniq = 3
keepalive = 1
group = 1,2
cccreshare = 0
cccignorereshare = 0