OSCAM auf der 7240 startet: aber reader läuft nicht

[16v]

Mahlzeit!

Ich hab ne 7240 mit 4
freetz auf 4.88er Basis - wegen dem Mini.

Hab meine Hauptbox die 7580 auf das Freetz 7.00 upgedated, leider geht das Oscam da nicht, also wollte ich den Reader an die 7240 stecken.
geht nicht.
Oscam upgedated, geht nicht. startet nicht. FAILED heißt es.
Was tun?
Egal welche Version ich nehme - nix.

Was tun?

 

[merlin57]

Nimm doch das Boardimage vom Teamserver für die 7240 funzt auf jeden Fall

 

[16v]

???
Geht doch 1. nicht - wegen der Fritz Mini Unterstützung
und 2. hat mir rolu2 das vor vielen Jahren mal extra gebaut!
Übermittelt hat mir das damals Gismotro.

und jetzt steh ich eben vor dem Problem, das ich da kein Oscam auf die Kiste kriege...

Oscam ist intern.

siehste! ...

bei mir steht das:
Startmodus (Intern uStor)
aber ich habe gar kein uStor...
liegt da der Fehler?

und das:
/usr/bin/modreg: File not found: /mod/usr/lib/cgi-bin/oscam/2.cgi
/usr/bin/modreg: File not found: /mod/usr/lib/cgi-bin/oscam/2.cgi
/usr/bin/modreg: File not found: /mod/usr/lib/cgi-bin/oscam/2.cgi

Ich glaub ich habs!
Ich brauch die oscams für die 71xx und 7570, da ist auch für die 7270v1 dabei.
die laufen scheinbar.

so, jetzt hab ich aber das:
USB Devices lsusb: Failed to run or not installed!

 

[rolu2]

Schau mal unter freetz-Info wie der genaue von dem von mir gebautem Image ist.

Lad mal ein Bild von oscam unter freetz hoch, damit mn sieht welches addon von oscam da drin ist

 

[16v]

Wie bitte?

Wunschimage-fuer_16v-mit-oscam-1.3.1-LCD4linux_7240_04.88freetz-devel-7000M.de_20140803-130008.image

Version: oscam-1.20-emu-r11424
NFR-OSCam Addon Version: 1.3.1

Oscam läuft ja jetzt, aber der Triple Reader will nicht...

• 
  
  Spoiler

  [*]Opening device /dev/ttyUSB1 (errno=19 No such device)
  [*]2018/08/02 21:57:50 67B32D84 r (reader) triplereader01 [smargo] Cannot open device: /dev/ttyUSB1

kommt mit jedem usb...

telnet:

Spoiler

root@fritz:/var/mod/root# ls -al /dev/ttyUSB*
crw-rw-rw- 1 root root 188, 0 Jan 1 2000 /dev/ttyUSB0
crw-rw-rw- 1 root root 188, 1 Jan 1 2000 /dev/ttyUSB1
crw-rw-rw- 1 root root 188, 2 Jan 1 2000 /dev/ttyUSB2
crw-rw-rw- 1 root root 188, 3 Jan 1 2000 /dev/ttyUSB3
crw-r--r-- 1 root root 188, 4 Aug 2 20:22 /dev/ttyUSB4
crw-r--r-- 1 root root 188, 5 Aug 2 20:22 /dev/ttyUSB5
crw-r--r-- 1 root root 188, 6 Aug 2 20:22 /dev/ttyUSB6
crw-r--r-- 1 root root 188, 7 Aug 2 20:22 /dev/ttyUSB7

root@fritz:/var/mod/root# cat /var/devices

Spoiler

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.19.2 musb-hcd
S: Product=MUSB HDRC host driver
S: SerialNumber=musb_hdrc
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0403 ProdID=6011 Rev= 5.00
S: Manufacturer=Argolis
S: Product=Triple Reader+
S: SerialNumber=00000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=150mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

 

[rolu2]

Wie sieht die oscam.server dazu aus?

Bilder musst du über eine horster hochladen und hier verlinken

 

[16v]

oscam server

Spoiler

[reader]
label = triplereader00
protocol = smargo
device = /dev/ttyUSB0
smargopatch = 1
fallback = 1
caid = 1830
boxkey = A7
rsakey = BF3
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,3,2,0

Was fürn Bild willste denn?
Seht doch schon alles da!

 

[rolu2]

Bilder hat sich erledigt.

Stell mal den Reader um auf smartreaderprotokoll. Dazu den Hacken beim FTDI-Treiber raus und das rein in die oscam.server

Spoiler: oscam.server

[reader]
label = triplereader00
protocol = smartreader
device = Serial:Reader 00000000
smargopatch = 1
fallback = 1
caid = 1830
boxkey = A7
rsakey = BF3
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,3,2,0

oder so

Spoiler: oscam.server

[reader]
label = triplereader00
protocol = smartreader
device = 001:002
smargopatch = 1
fallback = 1
caid = 1830
boxkey = A7
rsakey = BF3
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,3,2,0

 

[16v]

Hacken bei FTDI?
Ich habe:
USB Comport mit einem Treiber aktivieren (mit auswahl ftdi_sio oder PL...)
oder
FTDI + PL2303 Treiber gemeinsam

zur Auswahl.

muss da wirklich nur serial:reader stehen oder muss das durch etwas ersetzt werden?

Smartreader device 001:002 not found

Cannot open device: Serial:Reader 00000000

 

[rolu2]

Poste mal kompletten Log von oscamstart an bei allen 3 Versionen

Gesendet von meinem SM-A520F mit Tapatalk

 

[16v]

1

Spoiler

• 2018/08/03 20:18:43 00000000 s (main) System name = Linux
• 2018/08/03 20:18:43 00000000 s (main) Host name = fritz.fonwlan.box
• 2018/08/03 20:18:43 00000000 s (main) Release = 2.6.19.2
• 2018/08/03 20:18:43 00000000 s (main) Version = #1 Tue Jul 29 21:00:25 CEST 2014
• 2018/08/03 20:18:43 00000000 s (main) Machine = mips
• 2018/08/03 20:18:43 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5732
• 2018/08/03 20:18:43 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2018/08/03 20:18:43 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/08/03 20:18:43 00000000 s (main) signal handling initialized
• 2018/08/03 20:18:43 00000000 s (config) 4 provid's loaded
• 2018/08/03 20:18:43 00000000 s (config) 159 service-id's loaded in 9 ms
• 2018/08/03 20:18:43 00000000 s (config) 161 tier-id's loaded
• 2018/08/03 20:18:43 00000000 s (net) cccam: initialized (fd=5, port=13000)
• 2018/08/03 20:18:43 0FD2B871 h (webif) webif: decompressed 178305 bytes back into 440028 bytes
• 2018/08/03 20:18:43 0FD2B871 h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2018/08/03 20:18:43 00000000 s (reader) triplereader00 [smartreader] creating thread for device Serial:Reader 00000a3a
• 2018/08/03 20:18:43 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/08/03 20:18:43 00000000 s (main) waiting for local card init
• 2018/08/03 20:18:43 76899D73 r (reader) triplereader00 [smartreader] Smartreader device Serial:Reader 00000 not found
• 2018/08/03 20:18:43 76899D73 r (reader) triplereader00 [smartreader] Cannot open device: Serial:Reader 00000
• 2018/08/03 20:18:45 76899D73 r (reader) triplereader00 [smartreader] Smartreader device Serial:Reader 00000 not found
• 2018/08/03 20:18:45 76899D73 r (reader) triplereader00 [smartreader] Cannot open device: Serial:Reader 00000
• ...
• 2018/08/03 20:19:04 00000000 s (main) init for all local cards done
• 2018/08/03 20:19:04 00000000 s (anticasc) anti cascading disabled

2

Spoiler

• 2018/08/04 09:20:59 00000000 s (main) System name = Linux
• 2018/08/04 09:20:59 00000000 s (main) Host name = fritz.fonwlan.box
• 2018/08/04 09:20:59 00000000 s (main) Release = 2.6.19.2
• 2018/08/04 09:20:59 00000000 s (main) Version = #1 Tue Jul 29 21:00:25 CEST 2014
• 2018/08/04 09:20:59 00000000 s (main) Machine = mips
• 2018/08/04 09:20:59 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6361
• 2018/08/04 09:20:59 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2018/08/04 09:20:59 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/08/04 09:20:59 00000000 s (main) signal handling initialized
• 2018/08/04 09:20:59 00000000 s (config) 4 provid's loaded
• 2018/08/04 09:20:59 00000000 s (config) 159 service-id's loaded in 8 ms
• 2018/08/04 09:20:59 00000000 s (config) 161 tier-id's loaded
• 2018/08/04 09:20:59 00000000 s (net) cccam: initialized (fd=5, port=13000)
• 2018/08/04 09:20:59 00000000 s (reader) triplereader00 [smargo] creating thread for device /dev/ttyUSB1
• 2018/08/04 09:20:59 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/08/04 09:20:59 00000000 s (main) waiting for local card init
• 2018/08/04 09:20:59 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:20:59 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:20:59 6F4AEA10 h (webif) webif: decompressed 178305 bytes back into 440028 bytes
• 2018/08/04 09:20:59 6F4AEA10 h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2018/08/04 09:21:01 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:21:01 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:21:03 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:21:03 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:21:05 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:21:05 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:21:07 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:21:07 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:21:09 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:21:09 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:21:11 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:21:11 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:21:13 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:21:13 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:21:15 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:21:15 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:21:17 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:21:17 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:21:19 5537E8B3 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2018/08/04 09:21:19 5537E8B3 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB1
• 2018/08/04 09:21:19 00000000 s (main) init for all local cards done
• 2018/08/04 09:21:19 00000000 s (anticasc) anti cascading disabled

3 wenn ich keinen Hacken gemacht habe

Spoiler

• 2018/08/04 09:23:14 00000000 s (main) System name = Linux
• 2018/08/04 09:23:14 00000000 s (main) Host name = fritz.fonwlan.box
• 2018/08/04 09:23:14 00000000 s (main) Release = 2.6.19.2
• 2018/08/04 09:23:14 00000000 s (main) Version = #1 Tue Jul 29 21:00:25 CEST 2014
• 2018/08/04 09:23:14 00000000 s (main) Machine = mips
• 2018/08/04 09:23:14 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6917
• 2018/08/04 09:23:14 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2018/08/04 09:23:14 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/08/04 09:23:14 00000000 s (main) signal handling initialized
• 2018/08/04 09:23:14 00000000 s (config) 4 provid's loaded
• 2018/08/04 09:23:14 00000000 s (config) 159 service-id's loaded in 9 ms
• 2018/08/04 09:23:14 00000000 s (config) 161 tier-id's loaded
• 2018/08/04 09:23:14 00000000 s (net) cccam: initialized (fd=5, port=13000)
• 2018/08/04 09:23:14 493FD295 h (webif) webif: decompressed 178305 bytes back into 440028 bytes
• 2018/08/04 09:23:14 493FD295 h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2018/08/04 09:23:14 00000000 s (reader) triplereader00 [smartreader] creating thread for device 001:002
• 2018/08/04 09:23:14 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/08/04 09:23:14 00000000 s (main) waiting for local card init
• 2018/08/04 09:23:14 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:14 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:14 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:16 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:16 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:16 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:18 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:18 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:18 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:20 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:20 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:20 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:22 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:22 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:22 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:24 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:24 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:24 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:26 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:26 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:26 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:28 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:28 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:28 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:30 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:30 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:30 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:32 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:32 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:32 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:34 252279ED r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:23:34 252279ED r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:23:34 252279ED r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:23:34 00000000 s (main) init for all local cards done
• 2018/08/04 09:23:34 00000000 s (anticasc) anti cascading disabled

3 mit Hacken bei ftdi

Spoiler

• 2018/08/04 09:25:41 00000000 s (main) System name = Linux
• 2018/08/04 09:25:41 00000000 s (main) Host name = fritz.fonwlan.box
• 2018/08/04 09:25:41 00000000 s (main) Release = 2.6.19.2
• 2018/08/04 09:25:41 00000000 s (main) Version = #1 Tue Jul 29 21:00:25 CEST 2014
• 2018/08/04 09:25:41 00000000 s (main) Machine = mips
• 2018/08/04 09:25:41 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 7613
• 2018/08/04 09:25:41 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2018/08/04 09:25:41 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/08/04 09:25:41 00000000 s (main) signal handling initialized
• 2018/08/04 09:25:41 00000000 s (config) 4 provid's loaded
• 2018/08/04 09:25:41 00000000 s (config) 159 service-id's loaded in 9 ms
• 2018/08/04 09:25:41 00000000 s (config) 161 tier-id's loaded
• 2018/08/04 09:25:41 00000000 s (net) cccam: initialized (fd=5, port=13000)
• 2018/08/04 09:25:41 43C90EFD h (webif) webif: decompressed 178305 bytes back into 440028 bytes
• 2018/08/04 09:25:41 43C90EFD h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2018/08/04 09:25:41 00000000 s (reader) triplereader00 [smartreader] creating thread for device 001:002
• 2018/08/04 09:25:41 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/08/04 09:25:41 00000000 s (main) waiting for local card init
• 2018/08/04 09:25:41 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:25:41 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:25:41 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:25:43 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:25:43 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:25:43 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:25:45 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:25:45 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:25:45 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:25:47 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:25:47 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:25:47 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:25:49 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:25:49 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:25:49 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:25:51 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:25:51 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:25:51 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:25:53 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:25:53 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:25:53 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:25:55 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:25:55 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:25:55 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:25:57 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:25:57 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:25:57 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:25:59 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:25:59 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:25:59 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:26:01 22D7D707 r (reader) triplereader00 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 09:26:01 22D7D707 r (reader) triplereader00 [smartreader] Smartreader device 001:002 not found
• 2018/08/04 09:26:01 22D7D707 r (reader) triplereader00 [smartreader] Cannot open device: 001:002
• 2018/08/04 09:26:01 00000000 s (main) init for all local cards done
• 2018/08/04 09:26:01 00000000 s (anticasc) anti cascading disabled

 

[schumi2009]

Anscheinen passt dein Device im Oscam.Server nicht!
device = 001:002 das musst du anpassen in z.B. device = 001:003

 

[16v]

nö.
tut sich auch nix.

 

[16v]

Gibts noch ne Idee?

Kann ich die Oscam intern noch ersetzen auf 1.4.x?

 

[rolu2]

Dazu müsste das Image neu gebaut werden

Edit: Ist es den ein Problem, wenn du mal ein aktuelles MI flasht?

Dann siehst du ja, ob da der Reader erkannt wird. Zurückflahen ist ja möglich unter Freetz

oscamconfigs dann sichern und Stick neu formatieren