gelöst Oscam, 920HD - D02 wird nicht hell

[cool-sascha]

Hallo,

nach einem Update des Dreambox Images (newnigma2) wird Sky auf der D02 nicht mehr hell. Folgendes sehe ich in Oscam im Log

Spoiler: Oscam Log D02

2019/07/13 12:24:34 00000000 s (main) System name = Linux
2019/07/13 12:24:34 00000000 s (main) Host name = dm920
2019/07/13 12:24:34 00000000 s (main) Release = 3.14-1.17-dm920
2019/07/13 12:24:34 00000000 s (main) Version = #1 SMP Wed Nov 15 13:02:43 CET 2017
2019/07/13 12:24:34 00000000 s (main) Machine = armv7l
2019/07/13 12:24:34 00000000 s (main) Stb model = dm920
2019/07/13 12:24:34 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 907
2019/07/13 12:24:34 00000000 s (emu) OSCam-Emu version 796
2019/07/13 12:24:34 00000000 s (config) userdb reloaded: 9 accounts loaded, 0 expired, 0 disabled
2019/07/13 12:24:34 00000000 s (main) signal handling initialized
2019/07/13 12:24:34 00000000 s (config) 3 provid's loaded
2019/07/13 12:24:34 00000000 s (config) 389 service-id's loaded in 1 ms
2019/07/13 12:24:34 00000000 s (net) newcamd: initialized (fd=6, port=34000)
2019/07/13 12:24:34 00000000 s (net) -> CAID: 1834 PROVID: 000000
2019/07/13 12:24:34 00000000 s (net) newcamd: initialized (fd=7, port=32000)
2019/07/13 12:24:34 00000000 s (net) -> CAID: 1722 PROVID: 000000
2019/07/13 12:24:34 00000000 s (net) cccam: initialized (fd=8, port=33359)
2019/07/13 12:24:34 00000000 s (reader) d02 [mouse] creating thread for device /dev/ttyUSB0
2019/07/13 12:24:34 00000000 s (reader) emulator [emu] creating thread for device emulator
2019/07/13 12:24:34 09665EAF c (client) plain dvbapi-client granted (local, au=auto (2 reader))
2019/07/13 12:24:34 09665EAF c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2019/07/13 12:24:34 42CFBD31 r (emu) Stream key delayer initialized
2019/07/13 12:24:34 09665EAF c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)
2019/07/13 12:24:34 09665EAF c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 8
2019/07/13 12:24:34 6E0AC0EF h (webif) webif: decompressed 206504 bytes back into 455144 bytes
2019/07/13 12:24:34 6E0AC0EF h (webif) HTTP Server running. ip=:: port=16001
2019/07/13 12:24:34 42CFBD31 r (emu) Stream relay server initialized
2019/07/13 12:24:34 42CFBD31 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2019/07/13 12:24:34 00000000 (emu) INFO: FFDecsa parallel mode = 32
2019/07/13 12:24:34 45271D65 r (reader) d02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2019/07/13 12:24:35 09665EAF c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1834 ECM_PID: 1C0D PROVID: 000000
2019/07/13 12:24:35 09665EAF c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C7 ECM_PID: 1D0D PROVID: 000000
2019/07/13 12:24:35 09665EAF c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1861 ECM_PID: 190D PROVID: 000000
2019/07/13 12:24:35 09665EAF c (dvbapi) Demuxer 0 ecmpid 3 CAID: 09FD ECM_PID: 1E0D PROVID: 000000
2019/07/13 12:24:35 09665EAF c (dvbapi) Demuxer 0 found 4 ECMpids and 4 STREAMpids in caPMT
2019/07/13 12:24:35 09665EAF c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2019/07/13 12:24:35 42CFBD31 r (reader) emulator [emu] card detected
2019/07/13 12:24:35 45271D65 r (reader) d02 [mouse] card detected
2019/07/13 12:24:35 09665EAF c (dvbapi) Demuxer 0 found 4 ECMpids and 4 STREAMpids in PMT
2019/07/13 12:24:36 42CFBD31 r (reader) emulator [emu] found card system emu
2019/07/13 12:24:36 42CFBD31 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2019/07/13 12:24:36 42CFBD31 r (emu) Key file not found in: /etc/tuxbox/config
2019/07/13 12:24:36 42CFBD31 r (emu) Key file not found in: /var/keys
2019/07/13 12:24:36 42CFBD31 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0
2019/07/13 12:24:36 45271D65 r (reader) d02 [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2019/07/13 12:24:36 45271D65 r (reader) d02 [mouse] recognized
2019/07/13 12:24:37 45271D65 r (reader) d02 [mouse] detect irdeto tunneled nagra card
2019/07/13 12:24:37 45271D65 r (reader) d02 [mouse] rsa key configured -> using nagra mode
2019/07/13 12:24:39 09665EAF c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2019/07/13 12:24:40 45271D65 r (reader) d02 [mouse] ready for requests
2019/07/13 12:24:40 45271D65 r (reader) d02 [mouse] found card system nagra
2019/07/13 12:24:40 45271D65 r (reader) d02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2019/07/13 12:24:40 45271D65 r (reader) d02 [nagra] ROM: D N A S P 1 8 1
2019/07/13 12:24:40 45271D65 r (reader) d02 [nagra] REV: D V R L 0 0
2019/07/13 12:24:40 45271D65 r (reader) d02 [nagra] SER: ############
2019/07/13 12:24:40 45271D65 r (reader) d02 [nagra] CAID: 1834
2019/07/13 12:24:40 45271D65 r (reader) d02 [nagra] Prv.ID: 00 00 04 01 (sysid)
2019/07/13 12:24:40 45271D65 r (reader) d02 [nagra] Prv.ID: 00 00 00 00
2019/07/13 12:24:40 45271D65 r (reader) d02 [nagra] IRD ID: ############
2019/07/13 12:24:40 45271D65 r (reader) d02 [nagra] active to: 2019/08/29 04:03
2019/07/13 12:24:41 09665EAF c (dvbapi) Demuxer 0 restarting decoding requests after 6326 ms with 1 enabled and 3 disabled ecmpids!
2019/07/13 12:24:41 09665EAF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1834 PROVID 000000 ECMPID 1C0D ANY CHID PMTPID 0060 VPID 00FF
2019/07/13 12:24:43 45271D65 r (reader) d02 [nagra] Warning: needed try nr 2, next ECM has some delay
2019/07/13 12:24:47 45271D65 r (reader) d02 [nagra] Warning: needed try nr 2, next ECM has some delay
2019/07/13 12:24:49 09665EAF c (ecm) local (1722@000000/0000/0069/93:A49367F468CEAEBFA190D41BDE924B24): not found (7210 ms) by d02(btun 1834) - Sky Sport HD Extra
2019/07/13 12:24:49 09665EAF c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 3 disabled ecmpids!
2019/07/13 12:24:49 09665EAF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1834 PROVID 000000 ECMPID 1C0D ANY CHID PMTPID 0060 VPID 00FF
2019/07/13 12:24:50 45271D65 r (reader) d02 [nagra] Warning: needed try nr 2, next ECM has some delay
2019/07/13 12:24:54 45271D65 r (reader) d02 [nagra] Warning: needed try nr 2, next ECM has some delay
2019/07/13 12:24:58 45271D65 r (reader) d02 [nagra] Warning: needed try nr 2, next ECM has some delay

Spoiler: oscam.server

[reader]
label = d02
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 1722,1834
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2

Spoiler: oscam.dvbapi

P: 1834
P: 1722
P: 09C7

I: 0

Spoiler: oscam.user

[account]
user = local
group = 1,2
au = 1
CAID = 1722,1834,09C7
betatunnel = 1834.FFFF:1722

Spoiler: oscam.conf

[global]
logfile = /var/cache/oscam.log
clienttimeout = 15000
fallbacktimeout = 4900
clientmaxidle = 60
cachedelay = 120
bindwait = 20
nice = -1
maxlogsize = 100
preferlocalcards = 1
max_cache_time = 17

[monitor]
hideclient_to = 15
appendchaninfo = 0

[cccam]
port = 33359
reshare = 1
version = 2.1.4

[dvbapi]
enabled = 1
au = 1
boxtype = none
user = local

[newcamd]
key = 0102030405060708091011121314
port = 34000@1834:000000;32000@1722:000000

Jemand eine zündende Idee? Genau die gleiche config funktionierte vorher... :disappointed:

 

[DarkStarXxX]

betatunnel = 1834.FFFF:1722 <--- entfernen im Reader.

Deine Configs passen übrigens nicht zum Log.

 

[cool-sascha]

danke, wenn ich den betatunnel teil entferne, funktioniert es.

Eigentlich habe ich meine D02 im internen Reader. Dort wird aber nach dem letzten Update auf das Daily Build keine Karte mehr erkannt. Oscam sagt direkt "OFF" im Webinterface.
Hast du da noch eine Idee?

Spoiler: oscam.server

[reader]
label = d02
enable = 1
protocol = internal
device = /dev/sci0
caid = 1722,1834
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2

 

[dodo83]

cardmhz auf 2700 auch mal getestet im Internem Reader?
ansonsten mal das log posten

 

[modino2711]

in der oscam config ändern:

Spoiler

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

und von meiner alten D02 der reader:

Spoiler

[reader]
label = D02
protocol = internal
device = /dev/sci0
caid = 1722,1834
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 2700
group = 1
emmcache = 1,2,4,0

 

[cool-sascha]

Ein wirklich dämlicher Fehler meinerseits. Habe mir das nochmal in Ruhe angeschaut und gemerkt, dass keine Karte erkannt wird.
War auch kein Wunder - war ja im falschen Slot. Peinlich. Jetzt geht wieder alles, nachdem ich den Tunnel entfernt habe (siehe Antwort 1). Danke!