Optimuss OS1 mit Oscam zum laufen bringen

[linux-manni]

AW: Optimuss OS1 mit Oscam zum laufen bringen

warum nicht meine fritzbox ist der server mit smartreader

- - - - - - - - - -

wenn ich mein medialink nehme und die ip funzt es ja auch so

 

[dia]

AW: Optimuss OS1 mit Oscam zum laufen bringen

dann poste mal nur den server

 

[Derek Buegel]

AW: Optimuss OS1 mit Oscam zum laufen bringen

P: 098C V14
I:0

V14 muss weg.

MfG

 

[linux-manni]

AW: Optimuss OS1 mit Oscam zum laufen bringen

was genau allles?

 

[dia]

AW: Optimuss OS1 mit Oscam zum laufen bringen

oscam.conf
oscam.server
oscam.user

 

[Derek Buegel]

AW: Optimuss OS1 mit Oscam zum laufen bringen

Ich würde alles mit # davor löschen. Der Übersicht wegen. # bedeutet, ist auskommentiert und wird nicht beachtet.

MfG

 

[linux-manni]

AW: Optimuss OS1 mit Oscam zum laufen bringen

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-emu SVN r10071# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 256
preferlocalcards = 1
emmlogdir = var/etc/tuxbox/config/log
ecmfmt = c/s/l


[cache]


[cccam]
port = 33333
nodeid = BDBCA3BF10A715C6
version = 2.3.0
reshare = 1


[webif]
httpport = 17000
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
http_status_log = 1

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-emu SVN r10071# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = skyv14
protocol = smartreader
device = SRv2;Serial:smargo01
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
audisabled = 1
ndsversion = 2

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-emu SVN r10071# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = user
pwd = pass
au = skyv14
group = 1,2
cccmaxhops = 1
cccreshare = 1

 

[HagenB]

AW: Optimuss OS1 mit Oscam zum laufen bringen

Die IP ist ok In oscam.dvbapi so
P:098C
mehr nicht

 

[linux-manni]

AW: Optimuss OS1 mit Oscam zum laufen bringen

# hab ich deswegen so gemacht aber ich mach es weg

 

[Derek Buegel]

AW: Optimuss OS1 mit Oscam zum laufen bringen

Log? Wird die Karte gelesen/erkannt?

MfG

 

[dia]

AW: Optimuss OS1 mit Oscam zum laufen bringen

falsch
emmlogdir = var/etc/tuxbox/config/log

richtig
emmlogdir = var/etc/tuxbox/config/

jetzt stellst du dein receiver auf cccam
und gibst per ftp in der cccam.cfg

c:/192.168.178.1:33333 user pass

und es sollte hell werden

 

[linux-manni]

AW: Optimuss OS1 mit Oscam zum laufen bringen

Spoiler

2014/12/10 21:18:37 0 s signal handling initialized
2014/12/10 21:18:37 0 s 159 service-id's loaded in 8 ms
2014/12/10 21:18:37 0 s 177 tier-id's loaded
2014/12/10 21:18:37 0 s 4 provid's loaded
2014/12/10 21:18:37 0 s cccam: initialized (fd=6, port=33333)
2014/12/10 21:18:37 0 s skyv14 [smartreader] creating thread for device SRv2;Serial:smargo01
2014/12/10 21:18:37 0 s emulator [emu] creating thread for device emulator
2014/12/10 21:18:37 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/10 21:18:37 0 s waiting for local card init
2014/12/10 21:18:37 535290 r skyv14 [smartreader] Reader initialized (device=SRv2;Serial:smargo01, detect=cd, mhz= AUTO, cardmhz=369)
2014/12/10 21:18:37 53DF60 h webif: decompressed 115678 bytes back into 280444 bytes
2014/12/10 21:18:37 53DF60 h HTTP Server running. ip=0.0.0.0 port=17000
2014/12/10 21:18:37 537098 r key file not found in: /data/addon/oscam
2014/12/10 21:18:37 537098 r cannot open key file path: /var/keys
2014/12/10 21:18:37 537098 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2014/12/10 21:18:38 537098 r emulator [emu] card detected
2014/12/10 21:18:38 535290 r skyv14 [smartreader] card detected
2014/12/10 21:18:39 537098 r emulator [emu] found card system emu
2014/12/10 21:18:39 537098 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/10 21:18:39 537098 r key file not found in: /data/addon/oscam
2014/12/10 21:18:39 537098 r cannot open key file path: /var/keys
2014/12/10 21:18:42 535290 r skyv14 [smartreader] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/10 21:18:42 535290 r skyv14 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/12/10 21:18:42 535290 r skyv14 [smartreader] Calculated work ETU is 4.35 us reader mhz = 534
2014/12/10 21:18:42 535290 r skyv14 [smartreader] Effective reader settings mhz =534 F= 372 D= 16 N=2 T=0 inv=1 parity=ODD
2014/12/10 21:18:43 535290 r skyv14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/12/10 21:18:44 535290 r skyv14 [smartreader] Card type: P1TV
2014/12/10 21:18:44 535290 r skyv14 [smartreader] Rom version: 20AA
2014/12/10 21:18:45 535290 r skyv14 [smartreader] Credit available on card: 0 euro
2014/12/10 21:18:45 535290 r skyv14 [smartreader] Extended 4C detected
2014/12/10 21:18:45 535290 r skyv14 [smartreader] FuseByte: 00
2014/12/10 21:18:45 535290 r skyv14 [smartreader] Region Code:
2014/12/10 21:18:45 535290 r skyv14 [smartreader] Country Code: DEU
2014/12/10 21:18:46 535290 r skyv14 [smartreader] Pincode read: xxxx
2014/12/10 21:18:46 535290 r skyv14 [smartreader] PCB settings: FF FF FF FF
2014/12/10 21:18:46 535290 r skyv14 [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/12/10 21:18:46 535290 r skyv14 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2014/12/10 21:18:46 535290 r skyv14 [smartreader] ready for requests
2014/12/10 21:18:46 535290 r skyv14 [smartreader] found card system videoguard2
2014/12/10 21:18:46 535290 r skyv14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/10 21:18:46 535290 r skyv14 [videoguard2] card detected
2014/12/10 21:18:46 535290 r skyv14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/12/10 21:19:02 0 s init for all local cards done
2014/12/10 21:19:02 0 s anti cascading disabled ​

 

[linux-manni]

AW: Optimuss OS1 mit Oscam zum laufen bringen

nix hell

Spoiler

2014/12/10 21:18:37 0 s 4 provid's loaded
2014/12/10 21:18:37 0 s cccam: initialized (fd=6, port=33333)
2014/12/10 21:18:37 0 s skyv14 [smartreader] creating thread for device SRv2;Serial:smargo01
2014/12/10 21:18:37 0 s emulator [emu] creating thread for device emulator
2014/12/10 21:18:37 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/10 21:18:37 0 s waiting for local card init
2014/12/10 21:18:37 535290 r skyv14 [smartreader] Reader initialized (device=SRv2;Serial:smargo01, detect=cd, mhz= AUTO, cardmhz=369)
2014/12/10 21:18:37 53DF60 h webif: decompressed 115678 bytes back into 280444 bytes
2014/12/10 21:18:37 53DF60 h HTTP Server running. ip=0.0.0.0 port=17000
2014/12/10 21:18:37 537098 r key file not found in: /data/addon/oscam
2014/12/10 21:18:37 537098 r cannot open key file path: /var/keys
2014/12/10 21:18:37 537098 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2014/12/10 21:18:38 537098 r emulator [emu] card detected
2014/12/10 21:18:38 535290 r skyv14 [smartreader] card detected
2014/12/10 21:18:39 537098 r emulator [emu] found card system emu
2014/12/10 21:18:39 537098 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/10 21:18:39 537098 r key file not found in: /data/addon/oscam
2014/12/10 21:18:39 537098 r cannot open key file path: /var/keys
2014/12/10 21:18:42 535290 r skyv14 [smartreader] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/10 21:18:42 535290 r skyv14 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/12/10 21:18:42 535290 r skyv14 [smartreader] Calculated work ETU is 4.35 us reader mhz = 534
2014/12/10 21:18:42 535290 r skyv14 [smartreader] Effective reader settings mhz =534 F= 372 D= 16 N=2 T=0 inv=1 parity=ODD
2014/12/10 21:18:43 535290 r skyv14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/12/10 21:18:44 535290 r skyv14 [smartreader] Card type: P1TV
2014/12/10 21:18:44 535290 r skyv14 [smartreader] Rom version: 20AA
2014/12/10 21:18:45 535290 r skyv14 [smartreader] Credit available on card: 0 euro
2014/12/10 21:18:45 535290 r skyv14 [smartreader] Extended 4C detected
2014/12/10 21:18:45 535290 r skyv14 [smartreader] FuseByte: 00
2014/12/10 21:18:45 535290 r skyv14 [smartreader] Region Code:
2014/12/10 21:18:45 535290 r skyv14 [smartreader] Country Code: DEU
2014/12/10 21:18:46 535290 r skyv14 [smartreader] Pincode read: xxxx
2014/12/10 21:18:46 535290 r skyv14 [smartreader] PCB settings: FF FF FF FF
2014/12/10 21:18:46 535290 r skyv14 [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/12/10 21:18:46 535290 r skyv14 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2014/12/10 21:18:46 535290 r skyv14 [smartreader] ready for requests
2014/12/10 21:18:46 535290 r skyv14 [smartreader] found card system videoguard2
2014/12/10 21:18:46 535290 r skyv14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/10 21:18:46 535290 r skyv14 [videoguard2] card detected
2014/12/10 21:18:46 535290 r skyv14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/12/10 21:19:02 0 s init for all local cards done
2014/12/10 21:19:02 0 s anti cascading disabled
2014/12/10 21:40:33 551200 c encrypted cccam-client 192.168.178.25 rejected (invalid access)
2014/12/10 21:40:33 551200 c account 'User' not found!
2014/12/10 21:40:33 551200 c anonymous disconnected from 192.168.178.25 ​

 

[dia]

AW: Optimuss OS1 mit Oscam zum laufen bringen

die karte läuft nichts
gehe mal unter reader und links auf die zwei striche klicken
einmal aus dann wieder an
jetzt sollte sich mehr im livelog tuen

da ist mir ein fehler unterlaufen
gib das mal in dem client cccam.cfg ein

c:192.168.178.1:33333 user pass

 

[Derek Buegel]

AW: Optimuss OS1 mit Oscam zum laufen bringen

192.168.178.25 rejected (invalid access)​

Da stimmt was mit User und Pass nicht. Noch mal genau schauen. - Groß-/Kleinschreibung, falsche Leerzeichen oder ähnliches.

MfG

P.S. Bitte Linksbündig, oder das Log aus Files - logfile

@dia, Er hat/will oscam auf dem Client installieren