Openelec + vrd-sc + ORF?

[losh]

Hallo!

ich brauche dringend eure hilfe, sonst dreh ich bald durch!

das problem: so um die weihnachtszeit hatte ich noch OpenElec 3.2.4 mit vdr 2.0.1 und sc-plugin am laufen und konnte so mit relativ wenig aufwand die österreichischen erhellen.

seit dem umstieg auf OE 3.95.2, welche die version 2.1.5 von vdr verwendet, sind diese sender wieder dunkel...ich kämpf jetzt schon einige tage mit diesem problem...ohne nennenswerten erfolg. was kann sich denn da geändert haben?

ich hätte ja an sich noch ne ICE-Karte, die ich verwenden könnte und ein DD Octopus Twin CI, allerdings hab ich von OSCam (welches ich dafür ja bräuchte?) noch weniger ahnung...

ich würde mich über jeden hinweis wahnsinnig freuen!!

händischer start von vdr:

Spoiler

LOSH-HTPC:~ # vdr.start
Mar 23 21:54:04.144 [general.debug] using new 1.7.11+ capture code
Mar 23 21:54:04.147 [general.debug] capturing device 0/0 (subsystem ID dd010040)
Mar 23 21:54:04.147 [general.debug] creating standard device 0/0
Mar 23 21:54:04.163 [general.debug] capturing device 1/0 (subsystem ID dd010040)
Mar 23 21:54:04.163 [general.debug] creating standard device 1/0
Mar 23 21:54:04.179 [general.debug] capturing device 2/0 (subsystem ID dd010040)
Mar 23 21:54:04.179 [general.debug] creating standard device 2/0
Mar 23 21:54:04.195 [general.debug] capturing device 3/0 (subsystem ID dd010040)
Mar 23 21:54:04.195 [general.debug] creating standard device 3/0
Mar 23 21:54:04.212 [general.info] SC version 1.0.0pre-Unknown initializing (VDR 2.1.5)
Mar 23 21:54:04.213 [general.info] SC version 1.0.0pre-Unknown starting (VDR 2.1.5)
Mar 23 21:54:04.213 [core.load] ** Plugin config:
Mar 23 21:54:04.213 [core.load] ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Mar 23 21:54:04.213 [core.load] ** Local systems DON'T take priority over cached remote
Mar 23 21:54:04.213 [core.load] ** Concurrent FF recordings are NOT allowed
Mar 23 21:54:04.213 [core.load] ** Force transfermode with digital audio
Mar 23 21:54:04.213 [core.load] ** ECM cache is set to enabled
Mar 23 21:54:04.213 [core.load] ** TsBufferSize is 4 MB
Mar 23 21:54:04.213 [core.load] ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Mar 23 21:54:04.213 [general.error] failed open /storage/.xbmc/userdata/addon_data/service.multimedia.vdr-addon/config/plugins/sc/cardclient.conf: No such file or directory
Mar 23 21:54:04.213 [general.info] loading keys from /storage/.xbmc/userdata/addon_data/service.multimedia.vdr-addon/config/plugins/sc/SoftCam.Key
Mar 23 21:54:04.214 [core.load] loaded 2 keys from /storage/.xbmc/userdata/addon_data/service.multimedia.vdr-addon/config/plugins/sc/SoftCam.Key
Mar 23 21:54:04.214 [general.error] failed open /storage/.xbmc/userdata/addon_data/service.multimedia.vdr-addon/config/plugins/sc/smartcard.conf: No such file or directory
Mar 23 21:54:04.214 [general.error] failed open /storage/.xbmc/userdata/addon_data/service.multimedia.vdr-addon/config/plugins/sc/cardslot.conf: No such file or directory
Mar 23 21:54:04.214 [general.error] failed open /storage/.xbmc/userdata/addon_data/service.multimedia.vdr-addon/config/plugins/sc/override.conf: No such file or directory
Mar 23 21:54:04.214 [core.load] ** registered systems:
Mar 23 21:54:04.214 [core.load] ** Viaccess (pri -10)
Mar 23 21:54:04.214 [core.load] ** Cryptoworks (pri -10)
Mar 23 21:54:04.214 [core.load] ** Cardclient (pri -15)
Mar 23 21:54:04.214 [core.load] ** SC-Conax (pri -5)
Mar 23 21:54:04.214 [core.load] ** Seca (pri -10)
Mar 23 21:54:04.214 [core.load] ** Nagra (pri -10)
Mar 23 21:54:04.214 [core.load] ** Nagra2 (pri -10)
Mar 23 21:54:04.214 [core.load] ** Fake-NDS (pri -12)
Mar 23 21:54:04.214 [core.load] ** Irdeto (pri -10)
Mar 23 21:54:04.214 [core.load] ** Irdeto2 (pri -8)
Mar 23 21:54:04.214 [core.load] ** Conax (pri -10)
Mar 23 21:54:04.214 [core.load] ** SC-Nagra (pri -5)
Mar 23 21:54:04.214 [core.load] ** SC-Seca (pri -5)
Mar 23 21:54:04.214 [core.load] ** SC-VideoGuard2 (pri -5)
Mar 23 21:54:04.214 [core.load] ** SC-Cryptoworks (pri -5)
Mar 23 21:54:04.214 [core.load] ** ConstCW (pri -20)
Mar 23 21:54:04.214 [core.load] ** SC-Irdeto (pri -5)
Mar 23 21:54:04.214 [core.load] ** SC-Viaccess (pri -5)
Mar 23 21:54:04.214 [general.info] Using software decryption on card 3/0
Mar 23 21:54:04.220 [core.ci] card 3/0, slot 0 (v= 1) caids: 098c 09c4 1833 1702 09af 0100 0648 09c7 0d05 0d95 1722 1834 1861 0500 0622 0650 0d98 1811 1812 1836 1863
Mar 23 21:54:04.220 [core.ci] 3/0: reset of slot 0 requested
Mar 23 21:54:04.220 [general.info] Using software decryption on card 2/0
Mar 23 21:54:04.224 [core.ci] card 2/0, slot 0 (v= 1) caids: 098c 09c4 1833 1702 09af 0100 0648 09c7 0d05 0d95 1722 1834 1861 0500 0622 0650 0d98 1811 1812 1836 1863
Mar 23 21:54:04.224 [core.ci] 2/0: reset of slot 0 requested
Mar 23 21:54:04.224 [general.info] Using software decryption on card 1/0
Mar 23 21:54:04.225 [core.ci] card 1/0, slot 0 (v= 1) caids: 098c 09c4 1833 1702 09af 0100 0648 09c7 0d05 0d95 1722 1834 1861 0500 0622 0650 0d98 1811 1812 1836 1863
Mar 23 21:54:04.225 [core.ci] 1/0: reset of slot 0 requested
Mar 23 21:54:04.225 [general.info] Using software decryption on card 0/0
Mar 23 21:54:04.226 [core.ci] card 0/0, slot 0 (v= 1) caids: 098c 09c4 1833 1702 09af 0100 0648 09c7 0d05 0d95 1722 1834 1861 0500 0622 0650 0d98 1811 1812 1836 1863
Mar 23 21:54:04.226 [core.ci] 0/0: reset of slot 0 requested
Mar 23 21:54:05.129 [core.ci] 0/0.0: doReply changed, reset triggered
Mar 23 21:54:05.129 [core.ci] 0/0.0: now using CAIDs version 1
Mar 23 21:54:05.129 [core.ci] 0/0.0: status 'present'
Mar 23 21:54:05.278 [core.ci] 1/0.0: doReply changed, reset triggered
Mar 23 21:54:05.278 [core.ci] 1/0.0: now using CAIDs version 1
Mar 23 21:54:05.278 [core.ci] 1/0.0: status 'present'
Mar 23 21:54:05.278 [core.ci] 1/0.0: status 'reset'
Mar 23 21:54:05.279 [core.ci] 0/0.0: status 'reset'
Mar 23 21:54:05.881 [core.ci] 0/0.0: status 'ready'
Mar 23 21:54:06.280 [core.ci] 1/0.0: status 'ready'
Mar 23 21:54:06.330 [core.ci] 1/0.0 -> 00 01 82 01 01
Mar 23 21:54:06.331 [core.ci] 1/0.0 <- 00 01 83 01 01 80 02 01 80
Mar 23 21:54:06.331 [core.ci] 1/0.0 -> 00 01 81 01 01
Mar 23 21:54:06.331 [core.ci] 1/0.0 <- 00 01 a0 07 01 91 04 00 03 00 41 80 02 01 00
Mar 23 21:54:06.331 [core.ci] 1/0.0 -> 00 01 a0 0a 01 92 07 00 00 03 00 41 00 01
Mar 23 21:54:06.331 [core.ci] 1/0.0 -> 00 01 a0 09 01 90 02 00 01 9f 80 30 00
Mar 23 21:54:06.331 [core.ci] 1/0.0 sending CA info
Mar 23 21:54:06.331 [core.ci] 1/0.0 -> 00 01 81 01 01
Mar 23 21:54:06.331 [core.ci] 1/0.0 <- 00 01 a0 33 01 90 02 00 01 9f 80 31 2a 09 8c 09 c4 18 33 17 02 09 af 01 00 06 48 09 c7 0d 05 0d 95 17 22 18 34 18 61 05 00 06 22 06 50 0d 98 18 11 18 12 18 36 18 63 80 02 01 00
Mar 23 21:54:06.332 [core.ci] 0/0.0 -> 00 01 82 01 01
Mar 23 21:54:06.332 [core.ci] 0/0.0 <- 00 01 83 01 01 80 02 01 80
Mar 23 21:54:06.332 [core.ci] 0/0.0 -> 00 01 81 01 01
Mar 23 21:54:06.332 [core.ci] 0/0.0 <- 00 01 a0 07 01 91 04 00 03 00 41 80 02 01 00
Mar 23 21:54:06.332 [core.ci] 0/0.0 -> 00 01 a0 0a 01 92 07 00 00 03 00 41 00 01
Mar 23 21:54:06.332 [core.ci] 0/0.0 -> 00 01 a0 09 01 90 02 00 01 9f 80 30 00
Mar 23 21:54:06.332 [core.ci] 0/0.0 sending CA info
Mar 23 21:54:06.332 [core.ci] 0/0.0 -> 00 01 81 01 01
Mar 23 21:54:06.332 [core.ci] 0/0.0 <- 00 01 a0 33 01 90 02 00 01 9f 80 31 2a 09 8c 09 c4 18 33 17 02 09 af 01 00 06 48 09 c7 0d 05 0d 95 17 22 18 34 18 61 05 00 06 22 06 50 0d 98 18 11 18 12 18 36 18 63 80 02 01 00
Mar 23 21:54:07.333 [core.ci] 1/0.0 -> 00 01 a0 10 01 90 02 00 01 9f 80 32 07 03 00 00 01 00 01 03
Mar 23 21:54:07.333 [core.ci] 1/0.0 CA_PMT decoding len=7 lm=3 prg=0 len=1/1 ci_cmd(G)=03
Mar 23 21:54:07.333 [core.ci] 1/0.0 got CA pmt ciCmd=3 caLm=3
Mar 23 21:54:07.333 [core.ci] 1/0.0 answer to query
Mar 23 21:54:07.333 [core.ci] 1/0.0 no action taken
Mar 23 21:54:07.334 [core.ci] 1/0.0 -> 00 01 81 01 01
Mar 23 21:54:07.334 [core.ci] 1/0.0 <- 00 01 a0 0d 01 90 02 00 01 9f 80 33 04 00 00 00 81 80 02 01 00
Mar 23 21:54:07.334 [core.ci] 0/0.0 -> 00 01 a0 10 01 90 02 00 01 9f 80 32 07 03 00 00 01 00 01 03
Mar 23 21:54:07.334 [core.ci] 0/0.0 CA_PMT decoding len=7 lm=3 prg=0 len=1/1 ci_cmd(G)=03
Mar 23 21:54:07.334 [core.ci] 0/0.0 got CA pmt ciCmd=3 caLm=3
Mar 23 21:54:07.334 [core.ci] 0/0.0 answer to query
Mar 23 21:54:07.334 [core.ci] 0/0.0 no action taken
Mar 23 21:54:07.334 [core.ci] 0/0.0 -> 00 01 81 01 01
Mar 23 21:54:07.334 [core.ci] 0/0.0 <- 00 01 a0 0d 01 90 02 00 01 9f 80 33 04 00 00 00 81 80 02 01 00
Mar 23 21:54:07.435 [core.pids] 0/0: now tuned to source 530000c0(S19.2E) transponder 1b63b

wechsel auf ORF1 HD:

Spoiler

Mar 23 21:55:10.617 [core.pids] 1/0: now tuned to source 530000c0(S19.2E) transponder 1b2c6
Mar 23 21:55:10.667 [core.ci] 1/0.0 -> 00 01 a0 23 01 90 02 00 01 9f 80 32 1a 04 13 2f 01 00 00 02 07 80 00 00 04 07 81 00 00 04 07 82 00 00 06 07 83 00 00
Mar 23 21:55:10.667 [core.ci] 1/0.0 CA_PMT decoding len=1a lm=4 prg=4911 len=0/14 pid=2,780 len=0/f pid=4,781 len=0/a pid=4,782 len=0/5 pid=6,783 len=0/0
Mar 23 21:55:10.667 [core.ci] 1/0.0 got CA pmt ciCmd=-1 caLm=4
Mar 23 21:55:10.667 [core.ci] 1/0.0 answer to query surpressed
Mar 23 21:55:10.667 [core.ci] 1/0.0 set CAM decrypt (prg 4911)
Mar 23 21:55:10.667 [core.pids] 1/0: add SID 4911 (zero=0 noshift=1)
Mar 23 21:55:10.667 [core.pids] 1/0: pids VIDEO=0780 AUDIO=0781 AUDIO=0782 DOLBY=0783
Mar 23 21:55:10.667 [core.pids] Ca descriptors after simplify (pidCa=0)
Mar 23 21:55:10.667 [core.pids] prgca: <empty>
Mar 23 21:55:10.667 [core.pids] pidca 0780: <empty>
Mar 23 21:55:10.667 [core.pids] pidca 0781: <empty>
Mar 23 21:55:10.667 [core.pids] pidca 0782: <empty>
Mar 23 21:55:10.667 [core.pids] pidca 0783: <empty>
Mar 23 21:55:10.667 [core.pids] 1/0: SID=4911 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-
Mar 23 21:55:10.668 [core.pids] 1/0: found handler for SID 4911 (1/0.1 idle=1 idx=1)
Mar 23 21:55:10.668 [core.ecm] 1/0.1: setting new SID 4911
Mar 23 21:55:10.668 [core.pids] 1/0.1: pids on entry
Mar 23 21:55:10.668 [core.pids] 1/0.1: pids after delete
Mar 23 21:55:10.668 [core.pids] 1/0: descrambling pid 0780 on index 1
Mar 23 21:55:10.668 [core.pids] 1/0: descrambling pid 0781 on index 1
Mar 23 21:55:10.668 [core.pids] 1/0: descrambling pid 0782 on index 1
Mar 23 21:55:10.668 [core.pids] 1/0: descrambling pid 0783 on index 1
Mar 23 21:55:10.668 [core.pids] 1/0.1: pids after add VIDEO=0780 AUDIO=0781 AUDIO=0782 DOLBY=0783
Mar 23 21:55:10.668 [core.ecm] 1/0.1: is no longer idle
Mar 23 21:55:10.728 [core.ecm] 1/0.1: triggered SID -1/4911 idx -1/1 mode -1/0 -

ahja, falls jemand (zurecht) fragt, warum ich nicht auf die vorige, funktionierende version zurückgehe: seit 3.95.1 funktioniert der touchscreen meines gehäuses!

 

[hemonu]

AW: Openelec + vrd-sc + ORF?

Im VDR 2.1.5 ist die Schnittstelle zum CAM geändert. Dazu passt SC nicht.

 

[Daggi_Duck]

AW: Openelec + vrd-sc + ORF?

Frei nach dem Grundsatz: Never change a running system.

 

[losh]

AW: Openelec + vrd-sc + ORF?

Ok, meine Vermutung hat sich also bestätigt...gibt es ne Möglichkeit, das ganze mit OSCam hinzukriegen? Wie gesagt, ich hätte auch ne freigeschaltete ICE Karte, weiss aber nicht, wie ich OSCam konfigurieren muss, damit es klappt.

 

[mafe68]

AW: Openelec + vrd-sc + ORF?

Wenn man den yavdr 5.0a installiert hat und am aktuellen Stand das System ist, hat man die VDR Version 2.0.3 drauf. Das sind die yavdr stable repository und da geht auch das Sc-Plugin und der ORF

 

[legenwaitforitdary]

AW: Openelec + vrd-sc + ORF?

Nur gehts hier um OpenELEC und nicht yaVDR

Da ich OE nicht nutze, welche VDR Plugins sind denn dort integriert?
Ist das dvbapi Plugin auch an Bord?



edit:

Ich hab jetzt mal im github geschaut, das dvbapi Plugin sollte dabei sein.
Das sc Plugin wurde

Sie müssen registriert sein, um Links zu sehen.

.

Brauchts also nur das dvbapi + Oscam.
Die Konfiguration für deine Karte kannst du dir auch mit dem OscamConfigCreator erstellen lassen, gibts in der Database.

 

[losh]

AW: Openelec + vrd-sc + ORF?

super, danke!

werde mir dieses tool anschauen, sobald ich mal wieder ne windoof-kiste im zugriff hab :emoticon-0125-mmm:

 

[losh]

AW: Openelec + vdr-sc + ORF?

Ok ich hab mir von diesem tool jetzt folgende config generieren lassen:

oscam.conf:

Spoiler

[global]
logfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscam.log
nice = -1
preferlocalcards = 1
usrfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscamuser.log
cwlogdir = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/cw

[cache]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
user = DVBApi
boxtype = pc

[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httprefresh = 5
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 15

oscam.server:

Spoiler

[reader]
label = ORFIce
protocol = internal
device = /dev/dvb/adapter4/ca0
caid = 0D95
boxid = 12345678
detect = cd
cardmhz = 368
group = 2
emmcache = 1,1,2

oscam.user:

Spoiler

[account]
User = DVBApi
AU = 1
emmreassembly = 1
Group = 2

Produziert folgendes beim Start:

oscam.log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Apr 13 18:33:52 2014
-------------------------------------------------------------------------------
2014/04/13 18:33:52 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9597 (x86_64-openelec-linux-gnu)
2014/04/13 18:33:52 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 701
2014/04/13 18:33:52 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/04/13 18:33:52 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/04/13 18:33:52 0 s signal handling initialized
2014/04/13 18:33:52 0 s monitor: initialized (fd=6, port=988)
2014/04/13 18:33:52 0 s ORFIce [internal] creating thread for device /dev/dvb/adapter4/ca0
2014/04/13 18:33:52 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/04/13 18:33:52 0 s waiting for local card init
2014/04/13 18:33:52 24D8360 r ORFIce [internal] Reader initialized (device=/dev/dvb/adapter4/ca0, detect=cd, mhz=357, cardmhz=368)
2014/04/13 18:33:52 F0001B80 h webif: decompressed 144904 bytes back into 354120 bytes
2014/04/13 18:33:52 F0001B80 h HTTP Server running. ip=0.0.0.0 port=8888
2014/04/13 18:33:54 0 s init for all local cards done
2014/04/13 18:33:54 0 s anti cascading disabled
2014/04/13 18:33:54 24DD370 c plain dvbapi-client granted (DVBApi, au=auto (1 reader))
2014/04/13 18:33:54 24DD370 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 11

und beim Wechsel auf ORF1 HD:

oscam.log:

Spoiler

2014/04/13 18:38:44 24DD370 c [DVBAPI] Receiver sends PMT command 3 for channel 132F
2014/04/13 18:38:44 24DD370 c [DVBAPI] Receiver wants to demux srvid 132F on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/04/13 18:38:44 24DD370 c [ADD PID 0] CAID: 0D05 ECM_PID: 00DC PROVID: 000000
2014/04/13 18:38:44 24DD370 c [ADD PID 1] CAID: 0D95 ECM_PID: 010E PROVID: 000000
2014/04/13 18:38:44 24DD370 c [ADD PID 2] CAID: 0648 ECM_PID: 0078 PROVID: 000000
2014/04/13 18:38:44 24DD370 c [ADD PID 3] CAID: 1702 ECM_PID: 0140 PROVID: 000000
2014/04/13 18:38:44 24DD370 c [ADD PID 4] CAID: 1833 ECM_PID: 01A4 PROVID: 000000
2014/04/13 18:38:44 24DD370 c [ADD PID 5] CAID: 09C4 ECM_PID: 01E0 PROVID: 000000
2014/04/13 18:38:44 24DD370 c [ADD PID 6] CAID: 098C ECM_PID: 01EA PROVID: 000000
2014/04/13 18:38:44 24DD370 c [ADD PID 7] CAID: 0D98 ECM_PID: 0110 PROVID: 000000
2014/04/13 18:38:44 24DD370 c [ADD PID 8] CAID: 0650 ECM_PID: 007A PROVID: 000000
2014/04/13 18:38:44 24DD370 c Found 9 ECMpids and 4 STREAMpids in PMT
2014/04/13 18:38:44 24DD370 c [DVBAPI] Receiver wants to demux srvid 132F on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/04/13 18:38:44 24DD370 c New program number: 132F (0D05:132F unknown) [pmt_list_management 3]
2014/04/13 18:38:44 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:44 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:44 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:44 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:45 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:45 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:45 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:46 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:46 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:46 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:47 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:47 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:47 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:47 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:48 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:48 24DD370 c [DVBAPI] Receiver sends PMT command 3 for channel 132F
2014/04/13 18:38:48 24DD370 c [DVBAPI] Receiver wants to demux srvid 132F on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/04/13 18:38:48 24DD370 c [ADD PID 0] CAID: 0D05 ECM_PID: 00DC PROVID: 000000
2014/04/13 18:38:48 24DD370 c [ADD PID 1] CAID: 0D95 ECM_PID: 010E PROVID: 000000
2014/04/13 18:38:48 24DD370 c [ADD PID 2] CAID: 0648 ECM_PID: 0078 PROVID: 000000
2014/04/13 18:38:48 24DD370 c [ADD PID 3] CAID: 1702 ECM_PID: 0140 PROVID: 000000
2014/04/13 18:38:48 24DD370 c [ADD PID 4] CAID: 1833 ECM_PID: 01A4 PROVID: 000000
2014/04/13 18:38:48 24DD370 c [ADD PID 5] CAID: 09C4 ECM_PID: 01E0 PROVID: 000000
2014/04/13 18:38:48 24DD370 c [ADD PID 6] CAID: 098C ECM_PID: 01EA PROVID: 000000
2014/04/13 18:38:48 24DD370 c [ADD PID 7] CAID: 0D98 ECM_PID: 0110 PROVID: 000000
2014/04/13 18:38:48 24DD370 c [ADD PID 8] CAID: 0650 ECM_PID: 007A PROVID: 000000
2014/04/13 18:38:48 24DD370 c Found 9 ECMpids and 4 STREAMpids in PMT
2014/04/13 18:38:48 24DD370 c [DVBAPI] Receiver wants to demux srvid 132F on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/04/13 18:38:48 24DD370 c New program number: 132F (0D05:132F unknown) [pmt_list_management 3]
2014/04/13 18:38:48 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:48 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:48 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:48 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:49 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:49 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:49 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:49 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:50 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:50 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:50 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:51 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:51 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:51 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:51 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:52 24DD370 c [DVBAPI] Receiver sends PMT command 3 for channel 132F
2014/04/13 18:38:52 24DD370 c [DVBAPI] Receiver wants to demux srvid 132F on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/04/13 18:38:52 24DD370 c [ADD PID 0] CAID: 0D05 ECM_PID: 00DC PROVID: 000000
2014/04/13 18:38:52 24DD370 c [ADD PID 1] CAID: 0D95 ECM_PID: 010E PROVID: 000000
2014/04/13 18:38:52 24DD370 c [ADD PID 2] CAID: 0648 ECM_PID: 0078 PROVID: 000000
2014/04/13 18:38:52 24DD370 c [ADD PID 3] CAID: 1702 ECM_PID: 0140 PROVID: 000000
2014/04/13 18:38:52 24DD370 c [ADD PID 4] CAID: 1833 ECM_PID: 01A4 PROVID: 000000
2014/04/13 18:38:52 24DD370 c [ADD PID 5] CAID: 09C4 ECM_PID: 01E0 PROVID: 000000
2014/04/13 18:38:52 24DD370 c [ADD PID 6] CAID: 098C ECM_PID: 01EA PROVID: 000000
2014/04/13 18:38:52 24DD370 c [ADD PID 7] CAID: 0D98 ECM_PID: 0110 PROVID: 000000
2014/04/13 18:38:52 24DD370 c [ADD PID 8] CAID: 0650 ECM_PID: 007A PROVID: 000000
2014/04/13 18:38:52 24DD370 c Found 9 ECMpids and 4 STREAMpids in PMT
2014/04/13 18:38:52 24DD370 c [DVBAPI] Receiver wants to demux srvid 132F on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/04/13 18:38:52 24DD370 c New program number: 132F (0D05:132F unknown) [pmt_list_management 3]
2014/04/13 18:38:52 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:52 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:52 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:52 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:53 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:53 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:53 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:54 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:54 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:54 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:55 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:55 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:55 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:55 24DD370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/04/13 18:38:56 24DD370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/13 18:38:56 24DD370 c [DVBAPI] Receiver sends PMT command 3 for channel 132F
2014/04/13 18:38:56 24DD370 c [DVBAPI] Receiver wants to demux srvid 132F on adapter 0000 camask 0001 index 0000 pmtpid 0000
switch log file

Ich weiss echt nicht mehr weiter...bin für JEDEN Tip dankbar!

- - - - - - - - - -

Btw mittlerweile könnte man das hier glaub ich schon ins OSCam-Forum verschieben...

 

[legenwaitforitdary]

AW: Openelec + vrd-sc + ORF?

Ich denke, dass das am DD CI Modul liegt, zumoindest lief das mit vdr 2.0.x noch nicht, oder nur durch irgendwelche

Sie müssen registriert sein, um Links zu sehen.

.
=> Die einfachste Lösung für dich wäre ein gepatchtes Oscam oder ein USB-Cardreader a la Easymouse2 für deine ICE.

Da der oscam-emu Patch wohl die günstigere Variante ist, kannst du vorerst die ja mal probieren.
Den Patch gibts

Sie müssen registriert sein, um Links zu sehen.

, falls du keinen Plan hast wie du den anwendest oder Oscam überhaupt baust, kann ich das auch machen, falls du mir die Architektur deiner Openelec Kiste nennst.

 

[legenwaitforitdary]

AW: Openelec + vrd-sc + ORF?

Übrigens, um ein CI zu nutzen braucht es kein Oscam extra, der VDR kann direkt darauf zugreifen, sofern das CI überhaupt unter Linux läuft, das scheint bei den DD CIs wohl (noch ?) nicht der Fall zu sein.

Falls du ein 64bit Openelec Generic Build nutzt, kannst du

Sie müssen registriert sein, um Links zu sehen.

probieren, der passende Eintrag für die oscam.server ist mit enthalten.

 

[Wickie1]

AW: Openelec + vrd-sc + ORF?

Nur mal so zur Info:
Ich benutze ein normales Gentoo mit vdr-2.1.5 und dem sc-Plugin. Und es läuft bei mir wunderbar mit ORF. Und in Deinem Logfile wurde das sc-Plugin und mit der SoftCam.Key ja auch geladen.

Mein Logfile:

Spoiler

Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: triggered SID -1/4911 idx 1/1 mode -1/0 -
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: new caDescr: 09 04 0D 05 E0 DC 09 04 17 02 E1 40 09 04 18 33 E1 A4 09 04 0D 98 E1 10 09 04 06 50 E0 7A
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] from cache: system Cryptoworks (0d05) id 0000 with ecm dc/80
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.override] ecmprio: 0d05/0 pri 0
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: CA descriptors for SID 4911 (len=30)
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: descriptor 0d 05 e0 dc
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.override] ecmprio: 0d05/0 pri 0
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: found 0d05(0000) (Cryptoworks) id 0000 with ecm dc/80 (already present)
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: descriptor 17 02 e1 40
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.override] ecmprio: 1702/0 pri -4
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: found 1702(0000) (Irdeto) id 0000 with ecm 140/80 (new)
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: descriptor 18 33 e1 a4
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.override] tunnel: to 1702 (1001)
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.override] ecmprio: 1702/0 pri -4
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: found 1702(1833) (Nagra2) id 0000 with ecm 1a4/80 (new)
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: descriptor 0d 98 e1 10
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.override] ecmprio: 0d98/0 pri -5
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: found 0d98(0000) (Cryptoworks) id 0000 with ecm 110/80 (new)
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: descriptor 06 50 e0 7a
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.override] ecmprio: 0650/0 pri -5
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: found 0650(0000) (Irdeto2) id 0000 with ecm 7a/80 (new)
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: try system Cryptoworks (0d05) id 0000 with ecm dc (cached) (pri=-10)
Apr 15 21:26:16 htpc vdr[4538]: Apr 15 21:26:16.140 [core.ecm] 0/0.1: is no longer idle
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] system: using key W 0D05 04 20 00 A9D7...
Apr 15 21:26:16 htpc vdr[4538]: [4562] [core.ecm] 0/0.1: correct key found

 

[losh]

AW: Openelec + vrd-sc + ORF?

Danke für den Tip mit der USB-Cardreader. Ich würde aber gern erst mit Sicherheit wissen, dass das mit meinem CI nicht zu bewerkstelligen ist. Immerhin hab ich nen Haufen Geld dafür gezahlt...
Von OpenElec wird das CI offenbar erkannt:

LOSH-HTPC:~ # dmesg |grep Digital
[    2.366757] Digital Devices PCIE bridge driver 0.9.9, Copyright (C) 2010-13 Digital Devices GmbH
[    2.367032] DDBridge driver detected: Digital Devices Octopus CI

Wo sehe ich, ob vdr mit dem CI kann oder nicht?

Aktuelle Systeminfo:

OpenELEC (official) - Version: 3.95.5 (ich verwende das Generic 64Bit build)
vdr (2.1.6/2.1.6) - The Video Disk Recorder

 

[legenwaitforitdary]

AW: Openelec + vrd-sc + ORF?

Wenn du wirklich das CI Modul benutzen möchtest, es gibt ein Plugin in Alpha Status, jedoch müsstest du das entweder selbst in Openelec integrieren, oder machst einen Feature Request bei den OE Entwicklern, um das

Sie müssen registriert sein, um Links zu sehen.

aufzunehmen.

 

[losh]

AW: Openelec + vrd-sc + ORF?

Sorry, dass ich den hier aus der Versenkung hole...hatte die letzten Monate viel um die Ohren.
Nachdem die OE Entwickler offenbar nicht gewillt sind, das Plugin einzubauen

short answer: no
long answer: we don't even pick the en50221 part from media_build_experimental (as it's a bit too intrusive). so the CI slot is unlikely to work even with /sys/class/ddbridge/ddbridge0/redirect method anyway (I dont have a dd card nor ci module+smartcard to test it)
if TS redirection works for you, good, use it, if not - sorry

und ich es selbst nicht hinbekomme, hab ich nun endgültig kapituliert und mir diesen

Sie müssen registriert sein, um Links zu sehen.

bestellt. Ich hoffe, dass zumindest das kein Fehlkauf war.
Wäre echt nett, wenn mir jemand (vielleicht per PM?) eine Config zukommen lassen könnte, mit der ich endlich ORF usw. hell bekomme.

Danke!