I tested this on my own Sunray dm800se with tripple tuner and sim a8p inserted, it works fine !
For both a8p and original boxes you can also update to the latest (non patched) drivers, just telnet or ssh to your box and enter the following command:
The image is build on daily base, I don't check every day of the images work.
It's possible some changes were done in the source code which can cause problems.
hello, I see the black starting logo then sparische and you can not see it anymore
it does not stop loading my box .DM 800SE SIM 2.10.
6.1 works perfectly !!
ciao yes this work: 20180107
all perfectlly thanks a lot
Frank
The image 20181101 will work again (upload tonight)
Previous versions didn't work because there was not enough space left to start the box, somehow the defaultsat plugin was back in the image.
For now it works again, but the free space is at a crtical point.
When you run in the situation where the box doesn't boot, you can remove the not needed languages manually in a telnet or ssh console:
Oh OK, i tried i 2 times with my 800se clone and it stucks on R01 error.... maybe i will flash it again. Now it runs a other image on the box. Will test it next wek again. thanks
Hi ihr hab mega problem "R01: NO CA FOUND" und zwar wollt ich meine Dreambox 800HD SE SIM A8P mit diesem Image geflasht, danach wollt ich mit telnet "
wget -qO-
Hi ihr hab mega problem "R01: NO CA FOUND" und zwar wollt ich meine Dreambox 800HD SE SIM A8P mit diesem Image geflasht, danach wollt ich mit telnet "
wget -qO-
You didn't flash the original SSL.
Please follow this very careful:
Flash this image and before you press reboot goto the flash webpage again and flash the original ssl84 on top. You can find the original ssl here:
The part you are struggling with is just to update the drivers to the latest available version(this only works on original or sim a8p boxes), this has nothing to do with NO CA FOUND !
Hello, is this image stabil, because I have on my dream clone a openatv installed and sometimes when i watch iptv the screen freeze and the clone start again with a crash log.