"not able to decode" ACamd oder OScam das Problem?

[hampeli]

Hallo,

Nach 5 Tagen Frust mit OSCam unter Windows und Vplug Server Zusammenspiel mit einem Smargo habe ich nun unter Ubuntu mein Glück versucht und siehe da, die Karte scheint gelesen zu werden.
Es handelt sich hierbei um die weiße hd01 HD+ Karte und einem smargo von Maxdigital und der FW 1.5.

Nachdem ich dann endlich soweit war. dachte ich, das Acamd und Dvbviewer nun das kleinste Problem wären. Aber ich erhalte bei einem HD+ Sender nur die Meldung "not able to decode". Google schmeißt leider nicht viel verwertbares aus. Daher wende ich mich nun an euch und hoffe ihr könnt mir helfen. Besonders bei den ACamd Einstellungen bin ich mir so gar nicht sicher als ohnehin schon und sind auch nur irgendwie zusammengetragen.


ACamd Ausgabe

Spoiler

18:30:51.603: ACamd v0.6.1.8
18:30:51.683: systems: registering CA system Cardclient, pri -15, ident 1000
18:30:51.683: structloaders: registering loader cardclient config
18:30:51.683: cardclients: registering cardclient Newcamd
18:30:51.683: cardclients: registering cardclient Newcamd2
18:30:51.683: cardclients: registering cardclient CCcamN
18:30:51.683: cardclients: registering cardclient Radegast
18:30:51.683: cardclients: registering cardclient Camd35
18:30:51.683: cardclients: registering cardclient EmuBox03
18:30:51.683: cardclients: registering cardclient Gbox
18:30:51.683: cardclients: registering cardclient GboxN
18:30:51.683: cardclients: registering cardclient MboxN
18:30:51.683: structloaders: registering loader smartcard data
18:30:51.684: systems: registering CA system SC-Irdeto, pri -10, ident 1001
18:30:51.684: feature: using feature SMARTCARD
18:30:51.684: registering Irdeto smartcard (id 49726474)
18:30:51.684: systems: registering CA system SC-Seca, pri -10, ident 1002
18:30:51.684: registering Seca smartcard (id 53656361)
18:30:51.684: systems: registering CA system SC-Viaccess, pri -10, ident 1003
18:30:51.684: registering Viaccess smartcard (id 56696173)
18:30:51.684: systems: registering CA system SC-Conax, pri -10, ident 1004
18:30:51.684: registering Conax smartcard (id 436f6e78)
18:30:51.684: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
18:30:51.684: registering Cryptoworks smartcard (id 4372576f)
18:30:51.684: systems: registering CA system SC-Nagra, pri -10, ident 1006
18:30:51.684: registering Nagra smartcard (id 4e616772)
18:30:51.684: systems: registering CA system SC-NDS, pri -10, ident 1007
18:30:51.684: registering NDS smartcard (id 56694732)
18:30:51.687: Monitor listen on port 55595
18:30:51.727: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
18:30:51.727: Preferred, CAID 1702 with Provider 00000000
18:30:51.727: Preferred, CAID 0B00 with Provider 00000000
18:30:51.727: I:Ignore, CAID 1722 with Provider 00000000
18:30:51.727: I:Ignore, CAID 1834 with Provider 00000000
18:30:51.727: I:Ignore, CAID 09AF with Provider 00000000
18:30:51.727: I:Ignore, CAID 09C4 with Provider 00000000
18:30:51.727: I:Ignore, CAID 09C7 with Provider 00000000
18:30:51.727: I:Ignore, CAID 1861 with Provider 00000000
18:30:51.727: I:Ignore, CAID 1837 with Provider 00000000
18:30:51.727: I:Ignore, CAID 0648 with Provider 00000000
18:30:51.727: I:Ignore, CAID 09C4 with Provider 00000000
18:30:51.727: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
18:30:51.727: Engine [DVB Viewer Pro]
18:30:51.729: loading smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
18:30:51.730: loaded 9 smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
18:30:51.730: loading cardclient config from C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf
18:30:51.730: now using protocol version 525 (cdLen=8)
18:30:51.730: hostname=192.168.2.120 port=678 emm=1 emmCaids 0000/0000
18:30:51.730: Newcamd: username=hdplus password=hdplus key=0102030405060708091011121314 providers=none
18:30:51.730: client 'Newcamd' ready
18:30:51.730: ** registered systems:
18:30:51.730: ** SC-NDS (pri -10)
18:30:51.730: ** SC-Nagra (pri -10)
18:30:51.730: ** SC-Cryptoworks (pri -10)
18:30:51.730: ** SC-Conax (pri -10)
18:30:51.730: ** SC-Viaccess (pri -10)
18:30:51.730: ** SC-Seca (pri -10)
18:30:51.730: ** SC-Irdeto (pri -10)
18:30:51.730: ** Cardclient (pri -15)
18:30:51.730: no smartcard interface defined!
18:30:52.828:
18:30:52.828: Ch: 96 - RTL HD
18:30:52.828: Programm crc: 6E5BA267
18:30:52.829: I: 09C4:00000000
18:30:52.829: I: 0648:00000000
18:30:52.829: I: 09C4:00000000
18:30:52.829: PMT: ACamd_PMT.txt, search, not found PMT=0060 (AND SID=EF10)
18:30:52.829: 0x0060 0xEF10 0x1860 0x00000000 0x1ECC 0x1007 11100000
18:30:52.967: I: 09C4:00000000
18:30:52.967: I: 0648:00000000
18:30:52.990: Incomming PackageSize [188]
18:30:53.200: Login attemp (1)
18:30:53.201: connecting to 192.168.2.120:678/tcp (192.168.2.120)
18:30:53.231: Newcamd 0: CaID=1830 admin=1 srvUA=0000000048EAEB4F provider 008011/0000000048EA0000 <unhandled> 000000/0000000048EA0000 <unhandled> 003411/0000000048EA0000 <unhandled>
18:30:53.233: Newcamd 0: ECM [1ECC][1860/00000000] Pro (0.002)
18:30:53.233: Newcamd 0: ECM [1ECC][1860/00000000] not able to decode
18:30:53.459: Newcamd 0: ECM [1ECC][1860/00000000] Pro (0.003)
18:30:53.459: Newcamd 0: ECM [1ECC][1860/00000000] not able to decode
18:30:58.731: Newcamd 0: ECM [1ECC][1860/00000000] Pro (0.003)
18:30:58.731: Newcamd 0: ECM [1ECC][1860/00000000] not able to decode
18:30:58.866: Newcamd 0: EMM [1007][1860/00000000] Pro (0.003)

ACamd.ini

Spoiler

[ACamd]
DisableClientOnBadConnection=0
DisKeyDelay=1
Only184=1
DisableEmmCache=0
DisableDCWCache=0
DisableEcmCache=0
DisplayFilterActions=0
ShowMonitor=1
Active=1
ReadPmtFile=1
DisplayCCcamNShare=0
ReadPMT=1
DeleteUnusedEcm=1
AutoSearch=0
MultiEcm=0
UseChCacheIni=0
DisplayChameleon2Share=0
LockOnConnectionId=1
DCWTweak=1
UseCHIDCacheIni=0
ReadCAT=1

ACamd_PMT

Spoiler

P:1702:00000000:caid only
P:0B00:00000000:caid only
I:1722:00000000:Test
I:1834:00000000:Test
I:09AF:00000000:Test
I:09C4:00000000:Test
I:09C7:00000000:Test
I:1861:00000000:Test
I:1837:00000000:Test
I:0648:00000000:Test
I:09C4:00000000:Test
B:1833:00000000:1702:00000000:HD-Mapping

cardclient

Spoiler

newcamd:192.168.2.120:678:1/0000/0000:hdplus:hdplus:0102030405060708091011121314

#############################
#############################


Oscam Log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sun Aug 19 18:17:27 2012
-------------------------------------------------------------------------------
2012/08/19 18:17:26 0 s Starting listener 0
2012/08/19 18:17:26 0 s pandora: disabled
2012/08/19 18:17:26 0 s Starting listener 0
2012/08/19 18:17:26 0 s csp: disabled
2012/08/19 18:17:26 0 s Starting listener 0
2012/08/19 18:17:26 0 s radegast: disabled
2012/08/19 18:17:26 0 s starting thread http
2012/08/19 18:17:26 0 s http thread started
2012/08/19 18:17:26 0 s starting thread reader check
2012/08/19 18:17:26 0 s reader check thread started
2012/08/19 18:17:26 0 s starting thread check
2012/08/19 18:17:26 0 s check thread started
2012/08/19 18:17:26 0 s hdplus [smartreader] creating thread for device 002:003
2012/08/19 18:17:26 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/08/19 18:17:26 0 s waiting for local card init
2012/08/19 18:17:26 8F46D00 r hdplus [smartreader] Using 0x82 as endpoint for smartreader hardware detection
2012/08/19 18:17:26 8F46D00 r Found smartreader device 002:003
2012/08/19 18:17:26 8F486E8 h HTTP Server listening on port 8989
2012/08/19 18:17:26 8F46D00 r hdplus [smartreader] Reader initialized (device=002:003, detect=cd, mhz=369, cardmhz=369)
2012/08/19 18:17:27 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7271 (i686-linux-gnu)
2012/08/19 18:17:27 0 version=1.20-unstable_svn, build #7271, system=i686-linux-gnu, nice=-1
2012/08/19 18:17:27 0 client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/08/19 18:17:27 0 max. logsize=10 Kb, loghistorysize=4096 bytes
2012/08/19 18:17:27 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/08/19 18:17:27 8F46D00 r hdplus [smartreader] card detected
2012/08/19 18:17:31 8F46D00 r hdplus [smartreader] ATR: 3F FFxxxx3
2012/08/19 18:17:31 8F46D00 r hdplus [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/08/19 18:17:32 8F46D00 r hdplus [smartreader] detect native nagra card
2012/08/19 18:17:32 8F46D00 r hdplus [smartreader] type: NAGRA, caid: 1830, IRD ID: ############
2012/08/19 18:17:32 8F46D00 r hdplus [smartreader] ProviderID: 00 00 34 11
2012/08/19 18:17:32 8F46D00 r hdplus [smartreader] active to: 2012/10/08 12:59
2012/08/19 18:17:33 8F46D00 r hdplus [smartreader] -----------------------------------------
2012/08/19 18:17:33 8F46D00 r hdplus [smartreader] |id |tier |valid from |valid to |
2012/08/19 18:17:33 8F46D00 r hdplus [smartreader] +----+--------+------------+------------+
2012/08/19 18:17:33 8F46D00 r hdplus [smartreader] |8011|0064 |2012/08/17 |2013/08/18 |
2012/08/19 18:17:33 8F46D00 r hdplus [smartreader] |8011|0065 |1992/01/01 |1993/01/01 |
2012/08/19 18:17:33 8F46D00 r hdplus [smartreader] -----------------------------------------
2012/08/19 18:17:34 8F46D00 r hdplus [smartreader] found cardsystem nagra
2012/08/19 18:17:34 8F46D00 r hdplus [nagra] ROM: D N A S P 1 4 2
2012/08/19 18:17:34 8F46D00 r hdplus [nagra] REV: R e v G C 4
2012/08/19 18:17:34 8F46D00 r hdplus [nagra] SER: ############
2012/08/19 18:17:34 8F46D00 r hdplus [nagra] CAID: 1830
2012/08/19 18:17:34 8F46D00 r hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2012/08/19 18:17:34 8F46D00 r hdplus [nagra] Prv.ID: 00 00 00 00
2012/08/19 18:17:34 8F46D00 r hdplus [nagra] Prv.ID: 00 00 80 11
2012/08/19 18:17:34 8F46D00 r hdplus [nagra] ready for requests
2012/08/19 18:17:35 0 s init for all local cards done
2012/08/19 18:17:35 0 s anti cascading disabled
2012/08/19 18:30:52 8F50350 c client connected to 678 port
2012/08/19 18:30:52 8F50350 c encrypted newcamd:678-client 192.168.2.113 granted (hdplus, au=on (1 reader))
2012/08/19 18:30:52 8F50350 c user hdplus authenticated successfully (ACamd)
2012/08/19 18:30:52 8F50350 c AU enabled for user hdplus on reader hdplus

oscam.conf

Spoiler

[global]
usrfile = /var/log/oscam/oscamuser.log
logfile = /var/log/oscam/oscam.log
cwlogdir = /var/log/oscam/cw
nice = -1

[monitor]
port = 988
aulow = 120
hideclient_to = 15
monlevel = 1
appendchaninfo = 0

[newcamd]
port = 678@1830:000000,003411,00008011
key = 0102030405060708091011121314


[webif]
#port for frontend in webbrowser
httpport = 8989
httprefresh = 2
#ip's for web access
httpallowed = 255.255.255.255,255.255.255.255,127.0.0.1,192.168.2.0-192.168.2.255

[anticasc]
enabled = 0
numusers = 1
samples = 5
penalty = 1
aclogfile = /var/log/oscam/aclog.log
denysamples = 4

oscam.server

Spoiler

# HD+
[reader]
Label = hdplus
Protocol = smartreader
Device = 002:003
Detect = CD
EmmCache = 1,3,2
Group = 1
rsakey = BF35xxxDD5
boxkey = AxxxC
CAID = 1830
MHZ = 369
cardmhz = 369
ident = 1830:003411,000000

oscam.user

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn build #7271
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = hdplus
pwd = hdplus
group = 1
monlevel = 4
au = hdplus
services = hdplus

oscam.srvid

Spoiler

##
## Astra HD+ - Astra 19.2E
##
1830,1843,09C4:1519|Astra HD+|Tele5 HD|TV|
1830,1843,09C4:151A|Astra HD+|DMAX HD|TV|
1830,1843,09C4:5273|Astra HD+|NICK/CC HD|TV|
1830,1843,09C4:5274|Astra HD+|N24 HD|TV|
1830,1843,09C4:EF10|Astra HD+|RTL HD|TV|
1830,1843,09C4:EF11|Astra HD+|VOX HD|TV|
1830,1843,09C4:EF14|Astra HD+|Sport1 HD|TV|
1830,1843,09C4:EF15|Astra HD+|RTL2 HD|TV|
1830,1843,09C4:EF74|Astra HD+|SAT.1 HD|TV|
1830,1843,09C4:EF75|Astra HD+|ProSieben HD|TV|
1830,1843,09C4:EF76|Astra HD+|kabel eins HD|TV|
1830,1843,09C4:EF77|Astra HD+|Sixx HD|TV|
1830,1843,09C4:2E9A|Astra HD+|Super RTL HD|TV|
1830,1843,09C4:277E|Astra HD+|. (SD)|TV|

oscam.services

Spoiler

[hdplus]
caid = 1843
provid = 000000,003411,008011
srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,277E,5273,5274,1519

[hdplus]
caid = 1830
provid = 000000,003411,008011
srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,277E,5273,5274,1519

oscam.provid

Spoiler

################################################## #########################
########### edited by krimou #######################################
########################## 20.08.2011 #####################################

0100:00002F |Orbit [S2 2F]|
0100:000030 |RAI [S1 30]|
0100:000065 |Cyfra+ [S2 65]|
0100:000068 |Cyfra+ [S3 68]|
0100:000068 |Cyfra+ [S3 68]|
0100:00006A |Canal Digitaal [S3 6A]|
0100:00006C |TV Vlaanderen [S2 6C]|
0100:00006D |Telesat [S2 6D]|
0100:000074 |TVB Super Channel [S3 0074]|
0100:000080 |CanalSat [S2 80]|
0100:000084 |Numéricable [S2 84]|
0100:000086 |PMU [S3 86]|
0100:00009b |BeTV [S2 9b]|
0100:00009b |Voo [S2 9b]|
0100:0000B1 |Mediaset [S1 B1]|
0100:003311 |CanalSat [S3 3311]|
0100:003315 |CanalSat [S3 3315]|
0100:003317 |CanalSat [S3 3317]|
0100:004106 |Digital+ 19.2E [S2 4106]|
0100:005221 |Meo [S2 5221]|
0100:00A821 |Numéricable [S3 A821]|
0500:020710 |HTB+ [V2 20710]|
0500:020800 |AB Sat [V2 20800]|
0500:020820 |Bis [V2 20820]|
0500:020a00 |HRT [V2 20A00]|
0500:021100 |NetMed [V2 21100]|
0500:021110 |Arabesque [V2 21110]|
0500:021110 |Canal+ [V2 21110]|
0500:021200 |Asianet [V2 21200]|
0500:021700 |Harmonic [V2 21700]|
0500:021700 |digital media [V2 21700]|
0500:021900 |BHT TV [V2 21900]|
0500:022610 |C-Sat [V2 22610]|
0500:022C00 |RTVi [V2 22C00]|
0500:022E00 |Hayat TV [V2 22E00]|
0500:022F00 |Akta [V2 22F00]|
0500:023100 |RTVi [V2 23100]|
0500:023700 |HTB+ HD [V2 23700]|
0500:023800 |SSR/SRG [V2 23800]|
0500:024300 |Asianet [V2 24300]|
0500:024B00 |RTVi [V2 24B00]|
0500:024F00 |Akta [V2 24F00]|
0500:024F00 |N [V2 24F00]|
0500:024f00 |EuroSport [V2 24F00]|
0500:024f00 |EuroSport [V2 24F00]|
0500:030700 |Al Jazeera [V3 30700]|
0500:030A00 |HRT [V3 30A00]|
0500:030B00 |TNTSAT [V3 30B00]|
0500:032500 |Harmonic [V3 32500]|
0500:032820 |CanalSat [V3 32820]|
0500:032830 |CanalSat [V3 32830]|
0500:032920 |Orange [V3 32920]|
0500:032940 |CanalSat [V3 32940]|
0500:032a00 |Orange P. [V3 32a00]|
0500:040810 |SSR/SRG [V4 40810]|
0500:041140 |Canal+ Maghreb [V4 41140]|
0500:041500 |JSC Sports [V4 41500]|
0500:041700 |Red Hot [V4 41700]|
0500:042200 |Dolly Buster [V4 42200]|
0500:042400 |JSC Sports [V4 42400]|
0500:042700 |SCT/PH Media [V4 42700]|
0500:042700 |SCT [V4 42700]|
0500:042800 |Bis [V4 42800]|
0500:043800 |SCT [V4 43800]|
0500:043800 |Telespazio [V4 43800]|
0602:000000 |Pink [I2 0602]|
0602:000000 |NetMed [I2 0602]|
0603:000000 | Al Jazeera Sport [I2 0603]|
0604:000000 |Nova - ADD - Bulsatcom - SCT [I2 0604]|
0608:000000 |Belgacom [I2 0608]|
0614:000000 |World TV [I2 0614]|
0614:000000 |GlobeCast [I2 0614]|
0616:000000 |RR Sat [I2 0616]|
0622:000000 |C. Digitaal [I2 0622]|
0628:000000 |SCT [I2 0628]|
0640:000000 |GlobeCast UK [I 0640]|
0648:000000 |ORF Digital -AustriaSat [I 0648]|
0664:000000 |Digitürk [I2 0664]|
0668:000000 |Orbit [I2 0668]|
090F:000000 |Viasat [NDS 090F]|
0919:000000 |Sky Italia [NDS2 0919]|
091F:000000 |Total TV [NDS 091F]|
0929:000000 |Boom [NDS 0929]|
092B:000000 |D-Smart [NDS 092B]|
092F:000000 |Dolce TV [NDS 092F]|
0931:000000 |VisionTV [NDS 0931]|
093B:000000 |Sky Italia [NDS3 093B]|
093e:000000 |Viasat [NDS3 093E]|
0963:000000 |SkyUK [NDS3 0963]|
098E:000000 |Sky Deutschland [NDS BW 098E]|
098E:000000 |Kabel BW [NDS BW 098E]|
09AF:000000 |Kabelkiosk [NDS3 09AF]|
09C4:000000 |Sky Deutschland [NDS 09C4]|
09C4:000000 |ORF Digital [NDS 09C4]|
09c4:000000 |HD+ Germany [NDS 09C4]|
09c7:000000 |Kabel Deutschland [NDS KD 09c7]|
0B00:000000 |MTV Network - Focus Sat - Akta - T-System - Wilhelmtel - Kabelkiosk - DigitAlb - Canal Digital Nordic - TVN - Scopus Net - RTVi - TnK - intertainment.tv - Telewizja [C 00]|
0B01:000000 |Telenor - N - Conto TV [C 01]|
0B02:000000 |UPC Ro - ESS (UPC Ro) - Telenor (UPC Ro) [C 02]|
0BAA:000000 |Hello HD - Tring - Filmbox HD [C AA]|
0D00:000000 |Digitürk - Arqiva - MTV Network - Romantica 1 [CW 0D00]|
0D01:000000 |GlobeCast [CW 0D01]|
0D02:000000 |UPC Direct [CW2 0D02]|
0D03:000000 |Skylink [CW 0D03]|
0D04:000400 |DMC [CW 0D04]|
0D05:000000 |ORF Digital - AustriaSat [CW 0D05]|
0D05:000004 |ORF Digital - AustriaSat [CW 0D05]|
0D05:000010 |ORF Digital - AustriaSat [CW 0D05]|
0D06:000000 |ITV Partner [CW 0D06]|
0D07:000000 |BFBS [CW 0D07]|
0d08:000000 |ALmajd [CW 0D08]|
0D0F:000000 |CS Link [CW2 0D0F]|
0d70:000000 |Skylink [CW 0d70]|
0D95:000000 |ORF Digital - AustriaSat [CW 0D05]|
0D95:000004 |AustriaSat [CW 04 0D95]|
0D95:000010 |AustriaSat [CW 10 0D95]|
1702:000000 |Sky Deutschland [B sat 1702]|
1702:000000 |ORF Digital [B sat 1702]|
1722:000000 |Sky Deutschland [B kab 1722]|
1722:000000 |UnityMedia - Kabel Deutschland [B kab 1722]|
1800:002201 |Multicanal [N1 1800]|
1800:002301 |Multicanal [N1 1800]|
1800:003b01 |TeleClub [N1 1800]|
1800:007301 |Cablecom [N1 1800]|
1801:000000 |Sky Deutschland [N-UM01 kab]|
1801:000000 |UnityMedia [N-UM01]|
1801:000000 |Kabel Deutschland [N2 1801]|
1801:001102 |UnityMedia [N2 1102]|
1801:002111 |RCS DigiTV [N2 2111]|
1801:00c102 |GlobeCast [N C102]|
1802:000000 |TV Cabo - DIGI TV [N3 1802]|
1803:000000 |MediasetPrem - Cyfr Polsat - Eurosport [N3 1803]|
1810:000000 |Digital+ 19.2E [N3 1810]|
1830:000000 |HD+ Germany [N3 1830]|
1831:000000 |Sky Deutschland [N-UM01 kab]|
1831:000000 |UnityMedia [N-UM01]|
1833:000000 |Sky Deutschland [N3 1833]|
1833:000000 |ORF Digital [N3 1833]|
1834:000000 |Sky Deutschland [N3 1834]|
1834:000000 |Kabel Deutschland [N3 1834]|
1834:000401 |Kabel Deutschland [N3 D09]|
1835:000000 |Sky Deutschland [N-UM02 kab]|
1835:000000 |UnityMedia [N-UM02]|
1837:000000 |BetaDigital [N2 1837]|
1838:000000 |Sky Deutschland [N-UM02 kab]|
1838:000000 |UnityMedia [N-UM02]|
183D:000000 |TivùSat [N3 183D]|
1843:000000 |HD+ Germany [N3 1843]|
1880:000000 |DIGI TV [N3 1880]|
4AE0:000000 |Tricolor [DRE 4AE0]|
4AE1:000000 |PH Media [DRE 4AE1]|
4AE1:000000 |Platforma HD [DRE 4AE1]|

 

[Kermit]

AW: "not able to decode" ACamd oder OScam das Problem?

Hi,

setze mal in deine ACamd_PMT noch ein
P: 1830
I: 1860
und vor allem poste deine Sachen bitte in Spoiler.

Grüße

Kermit

 

[hampeli]

AW: "not able to decode" ACamd oder OScam das Problem?

Danke schonmal für die Hilfe.

Wenn ich die Werte in der Form analog wie die anderen Werte eintrage, dann bewirken die beiden Zeilen nur ein vollspammen des Logs. Es steht dann zwar kein "can not decode" mehr drin, entschlüsselt wird aber auch nicht.

 

[Kermit]

AW: "not able to decode" ACamd oder OScam das Problem?

Hi,

das Logfile wäre aber nicht schlecht um sehen zu können was ACamd nicht passt. Am besten auch noch zu dem selben Zeitpunkt das Logfile von OScam.

Grüße

Kermit

 

[hampeli]

AW: "not able to decode" ACamd oder OScam das Problem?

Das OSCam log sieht mit den neuen Einträgen so aus

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sun Aug 19 20:08:42 2012
-------------------------------------------------------------------------------
2012/08/19 20:08:42 8F46D00 r dropping client data for hdplus time 8s
2012/08/19 20:08:42 0 --- Skipped 167 duplicated log lines ---
2012/08/19 20:08:42 8F46D00 r dropping client data for hdplus time 7s
2012/08/19 20:08:42 8F46D00 r dropping client data for hdplus time 7s
2012/08/19 20:08:42 0 --- Skipped 162 duplicated log lines ---
2012/08/19 20:08:42 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7271 (i686-linux-gnu)
2012/08/19 20:08:42 0 version=1.20-unstable_svn, build #7271, system=i686-linux-gnu, nice=-1
2012/08/19 20:08:42 0 client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/08/19 20:08:42 0 max. logsize=10 Kb, loghistorysize=4096 bytes
2012/08/19 20:08:42 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/08/19 20:08:43 8F46D00 r dropping client data for hdplus time 7s
2012/08/19 20:09:35 0 --- Skipped 5356 duplicated log lines ---
2012/08/19 20:09:35 8F50350 c WARNING: invalid client
2012/08/19 20:09:35 8F50350 c hdplus disconnected from 192.168.2.113
-----ab hier-----
2012/08/19 20:45:43 8F50350 c client connected to 678 port
2012/08/19 20:45:43 8F50350 c encrypted newcamd:678-client 192.168.2.113 granted (hdplus, au=on (1 reader))
2012/08/19 20:45:43 8F50350 c user hdplus authenticated successfully (ACamd)
2012/08/19 20:45:43 8F50350 c AU enabled for user hdplus on reader hdplus
2012/08/19 20:45:54 8F46D00 r dropping client data for hdplus time 7s
2012/08/19 20:45:54 0 --- Skipped 1 duplicated log lines ---
2012/08/19 20:46:54 0 --- Skipped 8155 duplicated log lines ---
2012/08/19 20:46:57 0 --- Skipped 146 duplicated log lines ---
2012/08/19 20:46:57 8F46D00 r dropping client data for hdplus time 9s
2012/08/19 20:46:57 8F46D00 r dropping client data for hdplus time 9s
2012/08/19 20:46:57 0 --- Skipped 200 duplicated log lines ---
2012/08/19 20:46:57 8F46D00 r dropping client data for hdplus time 8s
2012/08/19 20:46:57 8F46D00 r dropping client data for hdplus time 8s
2012/08/19 20:46:57 0 --- Skipped 201 duplicated log lines ---
2012/08/19 20:46:57 8F46D00 r dropping client data for hdplus time 7s
2012/08/19 20:46:57 8F46D00 r dropping client data for hdplus time 7s

Die ACamd Ausagbe ist folgende, wobei ich dann die letzten taused Zeilen weggelassen habe, da sich die Ausgabe einfach nur fortführt.
Ein separates Logfile bei ACamd kann man nicht erstellen oder? Habs nun simple per C&P rausgeholt

Spoiler

20:45:24.902: ACamd v0.6.1.8
20:45:24.992: systems: registering CA system Cardclient, pri -15, ident 1000
20:45:24.992: structloaders: registering loader cardclient config
20:45:24.992: cardclients: registering cardclient Newcamd
20:45:24.992: cardclients: registering cardclient Newcamd2
20:45:24.992: cardclients: registering cardclient CCcamN
20:45:24.992: cardclients: registering cardclient Radegast
20:45:24.992: cardclients: registering cardclient Camd35
20:45:24.992: cardclients: registering cardclient EmuBox03
20:45:24.992: cardclients: registering cardclient Gbox
20:45:24.992: cardclients: registering cardclient GboxN
20:45:24.992: cardclients: registering cardclient MboxN
20:45:24.992: structloaders: registering loader smartcard data
20:45:24.992: systems: registering CA system SC-Irdeto, pri -10, ident 1001
20:45:24.992: feature: using feature SMARTCARD
20:45:24.992: registering Irdeto smartcard (id 49726474)
20:45:24.992: systems: registering CA system SC-Seca, pri -10, ident 1002
20:45:24.992: registering Seca smartcard (id 53656361)
20:45:24.992: systems: registering CA system SC-Viaccess, pri -10, ident 1003
20:45:24.992: registering Viaccess smartcard (id 56696173)
20:45:24.992: systems: registering CA system SC-Conax, pri -10, ident 1004
20:45:24.992: registering Conax smartcard (id 436f6e78)
20:45:24.992: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
20:45:24.992: registering Cryptoworks smartcard (id 4372576f)
20:45:24.992: systems: registering CA system SC-Nagra, pri -10, ident 1006
20:45:24.992: registering Nagra smartcard (id 4e616772)
20:45:24.992: systems: registering CA system SC-NDS, pri -10, ident 1007
20:45:24.992: registering NDS smartcard (id 56694732)
20:45:24.995: Monitor listen on port 51395
20:45:25.039: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
20:45:25.039: Preferred, CAID 1702 with Provider 00000000
20:45:25.039: Preferred, CAID 0B00 with Provider 00000000
20:45:25.039: I:Ignore, CAID 1722 with Provider 00000000
20:45:25.039: I:Ignore, CAID 1834 with Provider 00000000
20:45:25.039: I:Ignore, CAID 09AF with Provider 00000000
20:45:25.039: I:Ignore, CAID 09C4 with Provider 00000000
20:45:25.039: I:Ignore, CAID 09C7 with Provider 00000000
20:45:25.039: I:Ignore, CAID 1861 with Provider 00000000
20:45:25.039: I:Ignore, CAID 1837 with Provider 00000000
20:45:25.039: I:Ignore, CAID 0648 with Provider 00000000
20:45:25.039: I:Ignore, CAID 09C4 with Provider 00000000
20:45:25.039: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
20:45:25.039: Preferred, CAID 1830 with Provider 00000000
20:45:25.039: I:Ignore, CAID 1860 with Provider 00000000
20:45:25.039: Engine [DVB Viewer Pro]
20:45:25.044: loading smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
20:45:25.044: loaded 9 smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
20:45:25.044: loading cardclient config from C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf
20:45:25.045: now using protocol version 525 (cdLen=8)
20:45:25.045: hostname=192.168.2.120 port=678 emm=1 emmCaids 0000/0000
20:45:25.045: Newcamd: username=hdplus password=hdplus key=0102030405060708091011121314 providers=none
20:45:25.045: client 'Newcamd' ready
20:45:25.045: ** registered systems:
20:45:25.045: ** SC-NDS (pri -10)
20:45:25.045: ** SC-Nagra (pri -10)
20:45:25.045: ** SC-Cryptoworks (pri -10)
20:45:25.045: ** SC-Conax (pri -10)
20:45:25.045: ** SC-Viaccess (pri -10)
20:45:25.045: ** SC-Seca (pri -10)
20:45:25.045: ** SC-Irdeto (pri -10)
20:45:25.045: ** Cardclient (pri -15)
20:45:25.045: no smartcard interface defined!
20:45:26.126:
20:45:26.126: Ch: 97 - ProSieben
20:45:26.126: Programm crc: D6FA9E1D
20:45:26.127: PMT: ACamd_PMT.txt, search, not found PMT=0061 (AND SID=445D)
20:45:26.127: B: 1833:00000000 -> 1702:00000000
20:45:26.127: 0x0061 0x445D 0x1702 0x00000000 0x0000 0x1002 11100000
20:45:26.127: Error start ECM Filter
20:45:26.226: Incomming PackageSize [188]
20:45:43.142:
20:45:43.142: Ch: 96 - RTL HD
20:45:43.142: Programm crc: 6E5BA267
20:45:43.142: I: 09C4:00000000
20:45:43.142: I: 0648:00000000
20:45:43.142: I: 1860:00000000
20:45:43.142: I: 09C4:00000000
20:45:43.142: I: 1860:00000000
20:45:43.142: PMT: ACamd_PMT.txt, search, not found PMT=0060 (AND SID=EF10)
20:45:43.142: 0x0060 0xEF10 0x098C 0x00000000 0x1ACC 0x1008 11100000
20:45:43.151: I: 09C4:00000000
20:45:43.151: I: 0648:00000000
20:45:43.151: I: 1860:00000000
20:45:43.265: Login attemp (1)
20:45:43.265: connecting to 192.168.2.120:678/tcp (192.168.2.120)
20:45:43.293: Newcamd 0: CaID=1830 admin=1 srvUA=0000000048EAEB4F provider 008011/0000000048EA0000 <unhandled> 000000/0000000048EA0000 <unhandled> 003411/0000000048EA0000 <unhandled>
20:45:43.295: Newcamd 0: ECM [1ACC][098C/00000000] Pro (0.002)
20:45:43.295: Newcamd 0: ECM [1ACC][098C/00000000] not able to decode
20:45:43.512: Newcamd 0: ECM [1ACC][098C/00000000] Pro (0.002)
20:45:43.512: Newcamd 0: ECM [1ACC][098C/00000000] not able to decode
20:45:45.247: Newcamd 0: EMM [1008][098C/00000000] Pro (0.002)
20:45:45.248: Newcamd 0: EMM [1008][098C/00000000] Pro (0.001)
20:45:45.250: Newcamd 0: EMM [1008][098C/00000000] Pro (0.002)
20:45:45.251: Newcamd 0: EMM [1008][098C/00000000] Pro (0.001)
20:45:45.263: Newcamd 0: EMM [1008][098C/00000000] Pro (0.002)
Blocked 1 same messages...
20:45:45.277: Newcamd 0: EMM [1008][098C/00000000] Pro (0.001)
20:45:45.280: Newcamd 0: EMM [1008][098C/00000000] Pro (0.003)
20:45:45.281: Newcamd 0: EMM [1008][098C/00000000] Pro (0.001)
Blocked 1 same messages...
20:45:45.295: Newcamd 0: EMM [1008][098C/00000000] Pro (0.002)
20:45:45.296: Newcamd 0: EMM [1008][098C/00000000] Pro (0.001)
20:45:45.298: Newcamd 0: EMM [1008][098C/00000000] Pro (0.002)
20:45:45.309: Newcamd 0: EMM [1008][098C/00000000] Pro (0.001)
20:45:45.311: Newcamd 0: EMM [1008][098C/00000000] Pro (0.002)
20:45:45.312: Newcamd 0: EMM [1008][098C/00000000] Pro (0.001)
20:45:45.326: Newcamd 0: EMM [1008][098C/00000000] Pro (0.002)
20:45:45.327: Newcamd 0: EMM [1008][098C/00000000] Pro (0.001)
20:45:45.329: Newcamd 0: EMM [1008][098C/00000000] Pro (0.002)
20:45:45.330: Newcamd 0: EMM [1008][098C/00000000] Pro (0.001)
Blocked 1 same messages...
20:45:45.343: Newcamd 0: EMM [1008][098C/00000000] Pro (0.002)
Blocked 1 same messages...
20:45:45.346: Newcamd 0: EMM [1008][098C/00000000] Pro (0.001)

 

[Kermit]

AW: "not able to decode" ACamd oder OScam das Problem?

Hi,

bau deine ACamd_PMT mal in der Form um

Spoiler

P:1830
I:1702:00000000:caid only
I:0B00:00000000:caid only
I:1722:00000000:Test
I:1834:00000000:Test
I:09AF:00000000:Test
I:09C4:00000000:Test
I:09C7:00000000:Test
I:1861:00000000:Test
I:1837:00000000:Test
I:0648:00000000:Test
I:098C
I:1860
I:1843
B:1833:00000000:1702:00000000:HD-Mapping

Grüße

Kermit

 

[hampeli]

AW: "not able to decode" ACamd oder OScam das Problem?

Dann kommen wieder die "unable to decode" Ausgaben. Vielleicht ist ja etwas in den OScam Einträgen verkehrt?

acamd Ausgabe

Spoiler

07:47:24.770: ACamd v0.6.1.8
07:47:24.862: systems: registering CA system Cardclient, pri -15, ident 1000
07:47:24.862: structloaders: registering loader cardclient config
07:47:24.862: cardclients: registering cardclient Newcamd
07:47:24.862: cardclients: registering cardclient Newcamd2
07:47:24.862: cardclients: registering cardclient CCcamN
07:47:24.862: cardclients: registering cardclient Radegast
07:47:24.862: cardclients: registering cardclient Camd35
07:47:24.862: cardclients: registering cardclient EmuBox03
07:47:24.862: cardclients: registering cardclient Gbox
07:47:24.862: cardclients: registering cardclient GboxN
07:47:24.862: cardclients: registering cardclient MboxN
07:47:24.862: structloaders: registering loader smartcard data
07:47:24.862: systems: registering CA system SC-Irdeto, pri -10, ident 1001
07:47:24.862: feature: using feature SMARTCARD
07:47:24.862: registering Irdeto smartcard (id 49726474)
07:47:24.862: systems: registering CA system SC-Seca, pri -10, ident 1002
07:47:24.862: registering Seca smartcard (id 53656361)
07:47:24.863: systems: registering CA system SC-Viaccess, pri -10, ident 1003
07:47:24.863: registering Viaccess smartcard (id 56696173)
07:47:24.863: systems: registering CA system SC-Conax, pri -10, ident 1004
07:47:24.863: registering Conax smartcard (id 436f6e78)
07:47:24.863: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
07:47:24.863: registering Cryptoworks smartcard (id 4372576f)
07:47:24.863: systems: registering CA system SC-Nagra, pri -10, ident 1006
07:47:24.863: registering Nagra smartcard (id 4e616772)
07:47:24.863: systems: registering CA system SC-NDS, pri -10, ident 1007
07:47:24.863: registering NDS smartcard (id 56694732)
07:47:24.865: Monitor listen on port 62738
07:47:24.909: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
07:47:24.909: I:Ignore, CAID 1702 with Provider 00000000
07:47:24.909: I:Ignore, CAID 0B00 with Provider 00000000
07:47:24.909: I:Ignore, CAID 1722 with Provider 00000000
07:47:24.909: I:Ignore, CAID 1834 with Provider 00000000
07:47:24.909: I:Ignore, CAID 09AF with Provider 00000000
07:47:24.909: I:Ignore, CAID 09C4 with Provider 00000000
07:47:24.909: I:Ignore, CAID 09C7 with Provider 00000000
07:47:24.909: I:Ignore, CAID 1861 with Provider 00000000
07:47:24.909: I:Ignore, CAID 1837 with Provider 00000000
07:47:24.909: I:Ignore, CAID 0648 with Provider 00000000
07:47:24.909: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
07:47:24.909: Engine [DVB Viewer Pro]
07:47:24.914: loading smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
07:47:24.915: loaded 9 smartcard data from C:\Program Files (x86)\DVBViewer\Plugins\smartcard.conf
07:47:24.915: loading cardclient config from C:\Program Files (x86)\DVBViewer\Plugins\cardclient.conf
07:47:24.915: now using protocol version 525 (cdLen=8)
07:47:24.915: hostname=192.168.2.120 port=678 emm=1 emmCaids 0000/0000
07:47:24.915: Newcamd: username=hdplus password=hdplus key=0102030405060708091011121314 providers=none
07:47:24.915: client 'Newcamd' ready
07:47:24.915: ** registered systems:
07:47:24.915: ** SC-NDS (pri -10)
07:47:24.915: ** SC-Nagra (pri -10)
07:47:24.915: ** SC-Cryptoworks (pri -10)
07:47:24.915: ** SC-Conax (pri -10)
07:47:24.915: ** SC-Viaccess (pri -10)
07:47:24.915: ** SC-Seca (pri -10)
07:47:24.915: ** SC-Irdeto (pri -10)
07:47:24.915: ** Cardclient (pri -15)
07:47:24.915: no smartcard interface defined!
07:47:26.008:
07:47:26.008: Ch: 96 - RTL HD
07:47:26.008: Programm crc: 6E5BA267
07:47:26.008: I: 09C4:00000000
07:47:26.008: I: 0648:00000000
07:47:26.008: I: 09C4:00000000
07:47:26.008: PMT: ACamd_PMT.txt, search, not found PMT=0060 (AND SID=EF10)
07:47:26.008: 0x0060 0xEF10 0x1860 0x00000000 0x1ECC 0x1007 11100000
07:47:26.077: I: 09C4:00000000
07:47:26.077: I: 0648:00000000
07:47:26.114: Incomming PackageSize [188]
07:47:26.314: Login attemp (1)
07:47:26.314: connecting to 192.168.2.120:678/tcp (192.168.2.120)
07:47:26.344: Newcamd 0: CaID=1830 admin=1 srvUA=0000000048EAEB4F provider 008011/0000000048EA0000 <unhandled> 000000/0000000048EA0000 <unhandled> 003411/0000000048EA0000 <unhandled>
07:47:26.347: Newcamd 0: ECM [1ECC][1860/00000000] Pro (0.003)
07:47:26.347: Newcamd 0: ECM [1ECC][1860/00000000] not able to decode
07:47:26.551: Newcamd 0: ECM [1ECC][1860/00000000] Pro (0.003)
07:47:26.551: Newcamd 0: ECM [1ECC][1860/00000000] not able to decode
07:47:29.788: Newcamd 0: EMM [1007][1860/00000000] Pro (0.003)

oscam log

Spoiler

2012/08/20 07:47:26 8F51B90 c client connected to 678 port
2012/08/20 07:47:26 8F51B90 c encrypted newcamd:678-client 192.168.2.113 granted (hdplus, au=on (1 reader))
2012/08/20 07:47:26 8F51B90 c user hdplus authenticated successfully (ACamd)
2012/08/20 07:47:26 8F51B90 c AU enabled for user hdplus on reader hdplus
2012/08/20 07:49:36 8F51B90 c user hdplus reached 120 sec idle limit.

 

[Kermit]

AW: "not able to decode" ACamd oder OScam das Problem?

Hi,

dann versuch mal die Verbindung über eine C-Line herzustellen.

Grüße

Kermit

 

[hampeli]

AW: "not able to decode" ACamd oder OScam das Problem?

Habe jetzt cccam probiert jeweils einzeln ACamd, Hadu und FLYCCCAM
Camd35 mit ACamd.
Verbinden tun die sich alle. Entschlüsselt wird aber leider kein Sender

 

[Kermit]

AW: "not able to decode" ACamd oder OScam das Problem?

Hi,

ich könnte mir in den ... treten. Sehe erst jetzt, du hast 2 Services mit dem Namen hdplus angelegt. Lösch mal den mit der Caid 1843.

Grüße

Kermit

 

[hampeli]

AW: "not able to decode" ACamd oder OScam das Problem?

Hi.
das hilft leider auch nicht. Habs nur mit caid 1830 probiert sowie ganz ohne Einträge in der oscam.services

 

[elute]

AW: "not able to decode" ACamd oder OScam das Problem?

Na deine Karte wurde schon ewig nicht mehr genuzt (REV: R e v G C 4) und somit auch nicht upgedatet.Erst mal in einem zertifizierten Receiver testen ob sie hell wird

 

[hampeli]

AW: "not able to decode" ACamd oder OScam das Problem?

Hallo, danke für die Antwort.
Allerdings wurde die Karte sogar erst letzte Woche aktiviert. In einem Diablo2 funktioniert die Karte auch.

 

[elute]

AW: "not able to decode" ACamd oder OScam das Problem?

Irgendwie vermisse ich in deinem lezten acamd log:
Preferred, CAID 1830 with Provider 00000000

Hast du in der acamd_pmt.txt das eingetragen?
P:1830:000000:0000 # HD+ - Ses Astra

 

[hampeli]

AW: "not able to decode" ACamd oder OScam das Problem?

Meine PMT sieht aktuell so aus wie kermit vorgeschlagen hatte.

Spoiler

P:1830
I:1702:00000000:caid only
I:0B00:00000000:caid only
I:1722:00000000:Test
I:1834:00000000:Test
I:09AF:00000000:Test
I:09C4:00000000:Test
I:09C7:00000000:Test
I:1861:00000000:Test
I:1837:00000000:Test
I:0648:00000000:Test
I:098C
I:1860
I:1843
B:1833:00000000:1702:00000000:HD-Mapping

Aber auch wenn ich die erste Zeile entprechend deinem Tipp modifiziere, wird kein HD+ Sender entschlüsselt. Es bleibt leider beim "not able to decode"