Newcs newcs win32 : card failed

[cs2908]

Hallo Leute,

newcs ist zwar neu für mich, aber bisher habe ich mich auch nicht soo blöd angestellt.
Ich bekomme keine vernünftige Kommunikation mit der Karte (S02) hin.
Als eine der letzten Meldungen während der Initialisierung bekomme ich immer :
[ Loader ] Card 1722 on port COM1 failed.
Betriebssystem ist XP SP2.I
ch füge hier mal das log und die config ein.
Vielleicht hat jemand eine Idee dazu, was mich sehr freuen würde

log:

type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 19:22:32 ] [ Box detect ] Windows XP Build 2600
[ 19:22:32 ] [ Config ] Option <blockc0> for device 0 (testcs) not present, defaulting to NO
[ 19:22:32 ] [ Config ] Value in <ipk> for device 0 (testcs) is INVALID, skipping...
[ 19:22:32 ] [ Config ] Value in <ucpk> for device 0 (testcs) is INVALID, skipping...
[ 19:22:32 ] [ Config ] Pincode for device 0 (testcs): 0000
[ 19:22:32 ] [ Config ] COM1 ECM priority: hard
[ 19:22:32 ] [ EMM Cache ] Initialising dynamic Cache
[ 19:22:32 ] [ ECM Cache ] Initialising dynamic Cache
[ 19:22:32 ] [ Loader ] Starting Telnet on port 1001
[ 19:22:32 ] [ Loader ] Reader type 2 on node COM1
[ 19:22:32 ] [ Phoenix ] Opening device COM1
[ 19:22:32 ] [ Phoenix ] Setting parity to NONE on node COM1
[ 19:22:32 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 19:22:32 ] [ Phoenix ] Setting baud to 16457
[ 19:22:33 ] [ Loader ] Unknown card
[ 19:22:33 ] [ Loader ] Trying Irdeto (T=14)
[ 19:22:33 ] [ Loader ] Reader type 2 on node COM1
[ 19:22:34 ] [ Phoenix ] Opening device COM1
[ 19:22:34 ] [ Phoenix ] Setting parity to NONE on node COM1
[ 19:22:34 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 19:22:34 ] [ Phoenix ] Setting baud to 9600
[ 19:22:35 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 19:22:35 ] [ ATR ] Historical bytes: I R D E T O A C S [03] [84] U [FF] [80]
[ 19:22:35 ] [ Loader ] Init Irdeto card
[ 19:22:35 ] [ Phoenix ] Setting parity to NONE on node COM1
[ 19:22:35 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 19:22:35 ] [ Phoenix ] Setting baud to 9600
[ 19:22:35 ] [ Keyman ] Adding key 6D81D6 type 0 on Provider 000000 for caid 1722 ID=0
[ 19:22:35 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000000 for caid 1722 ID=0
[ 19:22:36 ] [ Keyman ] Skipping duplicate irdeto
[ 19:22:36 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000001 for caid 1722 ID=1
[ 19:22:36 ] [ Keyman ] Skipping duplicate irdeto
[ 19:22:36 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000002 for caid 1722 ID=2
[ 19:22:36 ] [ Keyman ] Skipping duplicate irdeto
[ 19:22:36 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000003 for caid 1722 ID=3
[ 19:22:37 ] [ Loader ] Card 1722 on port COM1 failed
[ 19:22:37 ] [ Loader ] Starting Newcamd Server on port 15000
[ 19:22:37 ] [ Newcamd ] Newcamd thread Server started on port 15000

config:

<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>COM1</node>
<parity>none</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>

Besten Dank schon mal

 

[@nd1]

AW: newcs win32 : card failed

Du hast aber deinen Kartenleser schon im 6 Mhz Modus stehen?

 

[cs2908]

AW: newcs win32 : card failed

Na sicher, sonst würde ja die Initialisierung soweit gar nicht funktionieren...

 

[@nd1]

AW: newcs win32 : card failed

Versuch die Karte mal im Nagra Modus zu booten, anstatt im Irdeto Modus, ich glaub Nagravision läuft mit 3,68 Mhz

 

[Klo]

AW: newcs win32 : card failed

Hi...

genau dieses Problem tritt bei mir auch auf !

Weiß jemand Rat ?

Gruß
Klo

 

[DerSpassmacher]

AW: newcs win32 : card failed

<parity>none</parity> mal ändern zu:
<parity>odd</parity>

und dies auch mal probieren: <carddetect>yes</carddetect>

auf "no" ändern

Gruß
Spaßmacher