Newcs newcs mit s02 mit ipbox 910 sifteam image

schnuffy1de · 11. Januar 2011

hi

ich habe das aktuelle sifteam (dgs basierend) im meiner ipbox 910hd.

habe, dank diesem forum, die mgcamd1.33_newcs1.67 in das sifteam mit dem total commander eingespielt. diese dann irgendwie auch "installiert".

habe dann die newscs.xml in var/tuxbox/config geändert in dieses.

Code:

<xml> 
<newCSconfig> 
   <readers> 
      <device> 
         <name>intern1702</name> 
         <type>sci</type> 
         <mhz>600</mhz> 
         <node>/dev/sci0</node> 
         <export>yes</export> 
         <enabled>yes</enabled> 
         <blocksa>No</blocksa> 
         <blockua>No</blockua> 
         <blockga>No</blockga> 
         <blockC0>Yes</blockC0> 
         <!-- <irdeto>0000000000000000</irdeto> 
         <irdeto>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto> 
         <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk> 
         <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk> --> 
         <boxkey>0000000000</boxkey> 
         <rsa>0000000000</rsa> 
         <PTShandshake>no</PTShandshake> 
         <crypto>no</crypto> 
         <carddetect>yes</carddetect> 
         <newcamd_port>34300</newcamd_port> 
         <autosid>Yes</autosid> 
         <priority>round</priority> 
         <reset>normal</reset> 
         <Seca>no</Seca> 
         <pincode>0000</pincode> 
      </device> 
    </readers> 
      <cache> 
         <emm>20</emm> 
         <ecm>-1</ecm> 
      </cache> 
   <httpd> 
      <server> 
         <port>8080</port> 
         <enabled>yes</enabled> 
      </server> 
      <user> 
         <name>newcs</name> 
         <password>newcs</password> 
         <accesslevel>admin</accesslevel> 
      </user> 
   </httpd> 
   <debug> 
         <password>newcs</password> 
         <level>normal</level> 
         <type>init,emm</type> 
         <output>console,tcp</output> 
         <console_options>normal,init</console_options> 
         <tcp_port>1001</tcp_port> 
         <tcp_options>normal,init</tcp_options> 
   </debug> 
   <newcamdserver> 
      <enabled>yes</enabled> 
      <name>cardserv</name> 
      <deskey>11 12 13 14 15 16 17 18 19 10 11 12 13 14</deskey> 
      <user> 
         <name>user1</name> 
         <password>pass1</password> 
         <hostname></hostname> 
         <port></port> 
         <au>yes</au> 
         <spider>no</spider> 
         <sidoverride>no</sidoverride> 
         <rate>2</rate> 
      </user>    
      <user> 
         <name>user2</name> 
         <password>pass2</password> 
         <hostname></hostname> 
         <port></port> 
         <au>yes</au> 
         <spider>no</spider> 
         <sidoverride>no</sidoverride> 
         <rate>2</rate> 
      </user>    
   </newcamdserver> 
</newCSconfig>

leider bleibt meine s02 im internen reader der ipbox 910hd dunkel. zeigt verschlüsselt an

was ist falsch?

lg

goofy81 · 11. Januar 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

schnuffy1de schrieb:

hi

ich habe das aktuelle sifteam (dgs basierend) im meiner ipbox 910hd.

habe, dank diesem forum, die mgcamd1.33_newcs1.67 in das sifteam mit dem total commander eingespielt. diese dann irgendwie auch "installiert".

habe dann die newscs.xml in var/tuxbox/config geändert in dieses.

Code:

<xml> 
<newCSconfig> 
   <readers> 
      <device> 
         <name>intern1702</name> 
         <type>sci</type> 
         <mhz>600</mhz> 
         <node>/dev/sci0</node> 
         <export>yes</export> 
         <enabled>yes</enabled> 
         <blocksa>No</blocksa> 
         <blockua>No</blockua> 
         <blockga>No</blockga> 
         <blockC0>Yes</blockC0> 
         <!-- <irdeto>0000000000000000</irdeto> 
         <irdeto>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto> 
         <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk> 
         <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk> --> 
         <boxkey>0000000000</boxkey> 
         <rsa>0000000000</rsa> 
         <PTShandshake>no</PTShandshake> 
         <crypto>no</crypto> 
         <carddetect>yes</carddetect> 
         <newcamd_port>34300</newcamd_port> 
         <autosid>Yes</autosid> 
         <priority>round</priority> 
         <reset>normal</reset> 
         <Seca>no</Seca> 
         <pincode>0000</pincode> 
      </device> 
    </readers> 
      <cache> 
         <emm>20</emm> 
         <ecm>-1</ecm> 
      </cache> 
   <httpd> 
      <server> 
         <port>8080</port> 
         <enabled>yes</enabled> 
      </server> 
      <user> 
         <name>newcs</name> 
         <password>newcs</password> 
         <accesslevel>admin</accesslevel> 
      </user> 
   </httpd> 
   <debug> 
         <password>newcs</password> 
         <level>normal</level> 
         <type>init,emm</type> 
         <output>console,tcp</output> 
         <console_options>normal,init</console_options> 
         <tcp_port>1001</tcp_port> 
         <tcp_options>normal,init</tcp_options> 
   </debug> 
   <newcamdserver> 
      <enabled>yes</enabled> 
      <name>cardserv</name> 
      <deskey>11 12 13 14 15 16 17 18 19 10 11 12 13 14</deskey> 
      <user> 
         <name>user1</name> 
         <password>pass1</password> 
         <hostname></hostname> 
         <port></port> 
         <au>yes</au> 
         <spider>no</spider> 
         <sidoverride>no</sidoverride> 
         <rate>2</rate> 
      </user>    
      <user> 
         <name>user2</name> 
         <password>pass2</password> 
         <hostname></hostname> 
         <port></port> 
         <au>yes</au> 
         <spider>no</spider> 
         <sidoverride>no</sidoverride> 
         <rate>2</rate> 
      </user>    
   </newcamdserver> 
</newCSconfig>

leider bleibt meine s02 im internen reader der ipbox 910hd dunkel. zeigt verschlüsselt an

was ist falsch?

lg

versuche es mal so

newcs
CWS = 127.0.0.1 34000 nameserverbox pwserverbox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs

goofy81 · 11. Januar 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

tschuldigung für meine erste antwort habe ein fehler gemacht

newcs

<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>00000000</boxkey>

<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

<name>upper</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>00000000</boxkey>

<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>

</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> 
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>newcs</name>


<password>newcs</password>


<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>nameserverbox</name>
<password>pwserverbox</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
<user>
<name>nameclientbox</name>
<password>pwclientbox</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
</newcamdserver>
</newCSconfig>
newcam.dlist
CWS = 127.0.0.1 34000 nameserverbox pwserverbox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs

mg_cfg

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E

time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }

schnuffy1de · 14. Januar 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

hi

habe mal deine config eingespielt
nun komm ich schonmal mit ip:8080 auf das newcs if

ich kann auch alles anklicken und immer erscheint was im browser fenster, außer wenn ich auf "NewCS Status" klicke. dann passiert nichts (seite kann nicht angezeigt werden)...

leider bleibt die s02 card immer noch dunkel

steht scramble oder nicht verfügbar (empfang ist aber da)
also denke ich eher, das noch was nicht ganz stimmt.
muss ich denn irgendwie was mit der mgcamd machen?

goofy81 · 17. Januar 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

und box type gibst dann 12 ein

kopier die neue version von mgcamd 1.35 bennene sie wie das alte bin

schnuffy1de · 19. Januar 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

hi

habe ich beides getan. leider immer noch scrambled

ich weiß langsam nicht mehr weiter. kann ich denn irgendwie logfiles ziehen um zu schauen, ob die karte angesprochen wird, oder der reader irgendwie noch deaktiviert ist?
komisch finde ich auch, das wenn ich über ip-adresse:8080 auf das newcs zugreife, ich mich einloggen kann. aber unter newcs status immer bekomme "diese seite kann nicht angezeigt werden". also genauso, als wenn man versucht in internet zu gehen aber keine internetverbindung vorhanden ist

unter newcamd-user habe ich einmal nameserverbox und nameclientbox. beider status offline.
unter readers habe ich einen grünen haken /dev/sci0 Reader 0 (lower) / 357 MHz
statistik: newcamd mit drei roten x
blocker drei grüne haken
entitlements for Reader 0 not found

Sie müssen registriert sein, um Links zu sehen.

Code:

<newCSconfig>
    <readers name="Card Readers">
        <device>
            <name>lower</name>
            <type>sci</type>
            <mhz>357</mhz>
            <node>/dev/sci0</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <boxkey>00000000</boxkey>
            <!-- <rsa>0000000000</rsa> -->
            <irdeto-camkey>0000000000000000</irdeto-camkey>
            <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
            <crypto-special>No</crypto-special>
            <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
            <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>34000</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode> 
            <priority>round</priority>
        </device>
        <!-- <device> -->
            <name>upper</name>
            <type>sci</type>
            <mhz>357</mhz>
            <node>/dev/sci1</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <boxkey>00000000</boxkey>
            <!-- <rsa>0000000000</rsa> -->
            <irdeto-camkey>0000000000000000</irdeto-camkey>
            <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
            <crypto-special>No</crypto-special>
            <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
            <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>34001</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode> 
            <priority>round</priority>
        <!-- </device> -->
    </readers>
    <cache>
            <emm>20</emm>
            <ecm>-1</ecm>
    </cache>
    <httpd>
        <server> <!-- Port to accept connections on -->
            <port>8080</port>
            <enabled>yes</enabled>
        </server>
        <user>
            <!-- valid value for userfile are:
             Any username you'd like - Used for browser to logon (its case sensitive).    -->
            <name>newcs</name>
 
            <!-- valid value for password are:
             Any password you'd like - Used for browser to logon (its case sensitive).    -->
            <password>newcs</password>
 
            <!-- valid value for accesslevel are:
             admin, stats - Define what rights the user has in the web-console    -->
            <accesslevel>admin</accesslevel>
        </user>
    </httpd>    
    <debug>
            <password>NewCSpwd</password>    
            <level>normal</level>
            <type>init</type>
            <output>console,tcp</output>
            <console_options>normal,init</console_options>
            <tcp_port>1001</tcp_port>
            <tcp_options>normal,init</tcp_options>
    </debug>
    <newcamdserver>
            <enabled>Yes</enabled>
            <name>newcs</name>
            <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
            <user>
                <name>nameserverbox</name>
                <password>pwserverbox</password>
                <hostname>localhost</hostname>
                <port>12000</port>
                <au>on</au>
                <sidoverride>off</sidoverride>
                <spider>No</spider>
            </user>
            <user>
                <name>nameclientbox</name>
                <password>pwclientbox</password>
                <hostname>localhost</hostname>
                <port>12000</port>
                <au>on</au>
                <sidoverride>off</sidoverride>
                <spider>No</spider>
            </user>
    </newcamdserver>
</newCSconfig>
newcam.dlist
CWS = 127.0.0.1 34000 nameserverbox pwserverbox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
 
mg_cfg
 
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
 
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
 
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
 
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }
 
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
 
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
 
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
 
# network ecm timeout in seconds
K: { 05 }
 
# newcamd dead routes connect retry, sec
Q: { 600 }
 
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
 
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
 
# on screen display Options, summ of:
# 01 show emu ecm 
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
 
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
 
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
 
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time 
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
 
# reread files, summ of: 
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
 
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
 
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 12 }

Uploaded with

Sie müssen registriert sein, um Links zu sehen.

goofy81 · 19. Januar 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

schnuffy1de schrieb:

hi

habe ich beides getan. leider immer noch scrambled

ich weiß langsam nicht mehr weiter. kann ich denn irgendwie logfiles ziehen um zu schauen, ob die karte angesprochen wird, oder der reader irgendwie noch deaktiviert ist?
komisch finde ich auch, das wenn ich über ip-adresse:8080 auf das newcs zugreife, ich mich einloggen kann. aber unter newcs status immer bekomme "diese seite kann nicht angezeigt werden". also genauso, als wenn man versucht in internet zu gehen aber keine internetverbindung vorhanden ist

unter newcamd-user habe ich einmal nameserverbox und nameclientbox. beider status offline.
unter readers habe ich einen grünen haken /dev/sci0 Reader 0 (lower) / 357 MHz
statistik: newcamd mit drei roten x
blocker drei grüne haken
entitlements for Reader 0 not found

Sie müssen registriert sein, um Links zu sehen.

Code:

<newCSconfig>
    <readers name="Card Readers">
        <device>
            <name>lower</name>
            <type>sci</type>
            <mhz>357</mhz>
            <node>/dev/sci0</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <boxkey>00000000</boxkey>
            <!-- <rsa>0000000000</rsa> -->
            <irdeto-camkey>0000000000000000</irdeto-camkey>
            <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
            <crypto-special>No</crypto-special>
            <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
            <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>34000</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode> 
            <priority>round</priority>
        </device>
        <!-- <device> -->
            <name>upper</name>
            <type>sci</type>
            <mhz>357</mhz>
            <node>/dev/sci1</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <boxkey>00000000</boxkey>
            <!-- <rsa>0000000000</rsa> -->
            <irdeto-camkey>0000000000000000</irdeto-camkey>
            <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
            <crypto-special>No</crypto-special>
            <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
            <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>34001</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode> 
            <priority>round</priority>
        <!-- </device> -->
    </readers>
    <cache>
            <emm>20</emm>
            <ecm>-1</ecm>
    </cache>
    <httpd>
        <server> <!-- Port to accept connections on -->
            <port>8080</port>
            <enabled>yes</enabled>
        </server>
        <user>
            <!-- valid value for userfile are:
             Any username you'd like - Used for browser to logon (its case sensitive).    -->
            <name>newcs</name>
 
            <!-- valid value for password are:
             Any password you'd like - Used for browser to logon (its case sensitive).    -->
            <password>newcs</password>
 
            <!-- valid value for accesslevel are:
             admin, stats - Define what rights the user has in the web-console    -->
            <accesslevel>admin</accesslevel>
        </user>
    </httpd>    
    <debug>
            <password>NewCSpwd</password>    
            <level>normal</level>
            <type>init</type>
            <output>console,tcp</output>
            <console_options>normal,init</console_options>
            <tcp_port>1001</tcp_port>
            <tcp_options>normal,init</tcp_options>
    </debug>
    <newcamdserver>
            <enabled>Yes</enabled>
            <name>newcs</name>
            <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
            <user>
                <name>nameserverbox</name>
                <password>pwserverbox</password>
                <hostname>localhost</hostname>
                <port>12000</port>
                <au>on</au>
                <sidoverride>off</sidoverride>
                <spider>No</spider>
            </user>
            <user>
                <name>nameclientbox</name>
                <password>pwclientbox</password>
                <hostname>localhost</hostname>
                <port>12000</port>
                <au>on</au>
                <sidoverride>off</sidoverride>
                <spider>No</spider>
            </user>
    </newcamdserver>
</newCSconfig>
newcam.dlist
CWS = 127.0.0.1 34000 nameserverbox pwserverbox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
 
mg_cfg
 
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
 
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
 
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
 
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }
 
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
 
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
 
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
 
# network ecm timeout in seconds
K: { 05 }
 
# newcamd dead routes connect retry, sec
Q: { 600 }
 
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
 
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
 
# on screen display Options, summ of:
# 01 show emu ecm 
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
 
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
 
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
 
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time 
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
 
# reread files, summ of: 
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
 
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
 
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 12 }

Uploaded with

Sie müssen registriert sein, um Links zu sehen.

kannst mal newcs mit incubuscamd
versuchen viell läuft die mgcamd nicht richtig mit dem neuen image nicht richtig

schnuffy1de · 21. Januar 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

hi

ich habe alle neu gemacht

hab mir das vodka 0.0.9 geflasht

Description: Based on r13469.
****************************

- Newcs 1.67, mgcamd Incubuscamd-1.35 and 1.21 are already installed
- Default PIN code: 1111

Configuration
=============

/ Var / keys: config data as newcamd.list newcs.xml incubusCamd.conf
/ Var / bin: export files as incubusCamd, mgcamd, newcs.

damit läuft nun auch im internen reader die s02.

was muss noch wo eingeben werden, damit der opti per dlan auf die s02 card (oder von der s02 card an den opti) greifen kann und das bild hell wird... (also bild in der ipbox und im opticum über dlan)?

cccam.cfg

Code:

C: 192.168.1.1 20000 user pass

cccamd.list

Code:

#C: url port username password

newcamd.list

Code:

CWS_KEEPALIVE = 300 
CWS = 127.0.0.1 10100 localuser1 localuser1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver 
CWS = 127.0.0.1 10101 localuser2 localuser2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver

newcs.xml

Code:

<newCSconfig> 
    <readers> 
        <device> 
            <name>lower</name> 
            <type>sci</type> 
         <mhz>357</mhz> 
         <node>/dev/sci0</node> 
         <parity>odd</parity> 
         <reset>normal</reset> 
         <export>Yes</export> 
         <enabled>Yes</enabled> 
         <blocksa>No</blocksa> 
         <blockua>No</blockua> 
         <blockga>No</blockga> 
         <boxkey>0000000000</boxkey> 
         <PTShandshake>No</PTShandshake> 
         <carddetect>yes</carddetect> 
         <newcamd_port>10100</newcamd_port> 
         <autosid>Yes</autosid> 
         <Seca>no</Seca> 
         <pincode>0000</pincode> 
         <priority>round</priority> 
        </device> 

        <device> 
            <name>upper</name> 
            <type>sci</type> 
         <mhz>357</mhz> 
         <node>/dev/sci1</node> 
         <parity>odd</parity> 
         <reset>normal</reset> 
         <export>Yes</export> 
         <enabled>No</enabled> 
         <blocksa>No</blocksa> 
         <blockua>No</blockua> 
         <blockga>No</blockga> 
         <boxkey>0000000000</boxkey> 
         <PTShandshake>No</PTShandshake> 
         <carddetect>yes</carddetect> 
         <newcamd_port>10101</newcamd_port> 
         <autosid>Yes</autosid> 
         <Seca>no</Seca> 
         <pincode>0000</pincode> 
         <priority>round</priority> 
         </device> 
   </readers> 

        <cache> 
                <emm>10</emm> 
                <ecm>10</ecm> 
        </cache> 
        <httpd> 
                <server> <Port> 
                        <port>11000</port> 
                        <enabled>yes</enabled> 
                </server> 
                <user> 
                        <name>root</name> 
                        <password>relook</password> 
                        <accesslevel>admin</accesslevel> 
                </user> 
        </httpd> 
        <debug> 
                <level>normal</level> 
                <type>init</type> 
                <output>console</output> 
                <logfile></logfile> 
                <console_options></console_options> 
                <file_options></file_options> 
        </debug> 
        <newcamdserver> 
                <enabled>yes</enabled> 
                <name>cardserv</name> 
      <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey> 
                <!-- <userfile>/tmp/users.txt</userfile> --> 

                <user> 
                        <name>localuser1</name> 
                        <password>localuser1</password> 
                        <au>on</au> 
                </user> 
             
                <user> 
                        <name>localuser2</name> 
                        <password>localuser2</password> 
                        <au>on</au> 
                </user> 
        </newcamdserver> 
</newCSconfig>

goofy81 · 21. Januar 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

mit mgcamd habe ich es nie versucht nur mit oscam.

kannst es mal so mit versuchen

https://www.digital-eliteboard.com/f494/cs-mgcamd-to-mgcamd-24973/

schnuffy1de · 22. Januar 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

hi

goofy

schönen dank für deine hilfe

nun klappt es, danke
mit newcs
war eine defekte datei drin

danke

schnuffy1de · 30. Mai 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

hi

ich bins wieder
so, hab nun die ipbox hier
kann also jetzt erst die config dateien auslesen

also, ich habe eine s02 im internen reader auf der ipbox 910hd (vodka image) drauf.
da ist autom newcs und mgcamd installiert. das war für mich wichtig, da ich leider die ipbox (warum auch immer) nicht ins internet bekomme.

meine s02 möchte ich im internen reader hell bekommen.
das klappt auch alles soweit. total super.
was nicht klappt ist folgendes.
die karte wird wohl nicht wieder "neu" aktiviert (wenn ich das richtig verstanden habe).
also sky läuft, und nach x wochen (z.b. 2monaten, neuerdings ein paar tage), ist die karte dann dunkel (sender verschlüsselt). man bekommt das dann nicht hell. auch nicht auf sport info (oder wie der kanal genau heißt). dann steck ich die s02 in die dbox2, stell sport info ein und nach spätestens einer stunde ist diese wieder hell und läuft dann auch in der ipbox. bis diese dann irgendwann wieder dunkel wird...

viel geändert habe ich nicht. sind eigentlich die configs, die im vodka image enthalten sind.
cs/hs wird nicht betrieben. nur die karte im internen reader soll laufen

newcs.xml

Code:

<newCSconfig>
    <readers name="Card Readers">
        <device>
            <name>lower</name>
            <type>sci</type>
            <mhz>357</mhz>
            <node>/dev/sci0</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <boxkey>0000000000</boxkey>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>10100</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode>
            <priority>round</priority>
        </device>

        
    </readers>

        <cache>
                <emm>10</emm>
                <ecm>10</ecm>
        </cache>
        <httpd>
                <server> <!-- Port to accept connections on -->
                        <port>11000</port>
                        <enabled>yes</enabled>
                </server>
                <user>
                        <name>root</name>
                        <password>relook</password>
                        <accesslevel>admin</accesslevel>
                </user>
        </httpd>
        <debug>
                <level>normal</level>
                <type>init</type>
                <output>console</output>
                <logfile></logfile>
                <console_options></console_options>
                <file_options></file_options>
        </debug>
        <newcamdserver>
                <enabled>yes</enabled>
                <name>cardserv</name>
        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
                <!-- <userfile>/tmp/users.txt</userfile> -->

                <user>
                        <name>localuser1</name>
                        <password>localuser1</password>
                        <au>on</au>
                
                </user>
        </newcamdserver>
</newCSconfig>

mg_cfg

Code:

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 02 }

# *** update (sum 01 or 02 with 04)
#    01 update only new ****, default setting
#    02 update all **** (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/****
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32    cccamd netclient, card list saved as /tmp/cccamd.info 
#        (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 02 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 01 } root newcs

# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm **** update
#    + web port to use for osd
S: { 03 } 8080

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.*** on channel change
#    04 reread SoftCam.*** if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 12 }

# map all 180x nagra caids to 1801
# default is 01
F: { 01 }

goofy81 · 30. Mai 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

versuch es mal so

mg.cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E

Du musst angemeldet sein, um Bilder zu sehen.

time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 12 }

# map all 180x nagra caids to 1801
# default is 01
F: { 01 }

schnuffy1de · 30. Mai 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

goofy81 schrieb:
versuch es mal so
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

hi, erstmal schönen dank
was muss denn als username passwort dahin?

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

ist die letzte Zeile richtig? ist ja ne andere ip als die box.

werd auf jeden fall die einstellungen mal testen

goofy81 · 30. Mai 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

schnuffy1de schrieb:
hi, erstmal schönen dank
was muss denn als username passwort dahin?

ist die letzte Zeile richtig? ist ja ne andere ip als die box.

werd auf jeden fall die einstellungen mal testen

das sind die gleiche mgcamd einstellungen mit denen ich meine tivusat am anfang immer aktiviert habe.

tut mir leid aber mehr weis ichuber mgcamd nicht da ich nur noch die oscam nutze

schnuffy1de · 30. Mai 2011

AW: newcs mit s02 mit ipbox 910 sifteam image

hi

schon einmal danke schön
nun komme ich wenigstens wieder ins webif

da kommt dann folgendes

Sie müssen registriert sein, um Links zu sehen.

ist das richtig?
oder stimmt da was nicht?
auf jeden fall hab ich wieder bild

und das OHNE dbox2

Suche

Suche

Newcs newcs mit s02 mit ipbox 910 sifteam image

schnuffy1de

Hacker

goofy81

Ist gelegentlich hier

goofy81

Ist gelegentlich hier

schnuffy1de

Hacker

goofy81

Ist gelegentlich hier

schnuffy1de

Hacker

goofy81

Ist gelegentlich hier

schnuffy1de

Hacker

goofy81

Ist gelegentlich hier

schnuffy1de

Hacker

schnuffy1de

Hacker

goofy81

Ist gelegentlich hier

schnuffy1de

Hacker

goofy81

Ist gelegentlich hier

schnuffy1de

Hacker

Ähnliche Themen

Spenden Unterstützung