Newcs newcs mit s02 mit ipbox 910 sifteam image

<xml> 
<newCSconfig> 
   <readers> 
      <device> 
         <name>intern1702</name> 
         <type>sci</type> 
         <mhz>600</mhz> 
         <node>/dev/sci0</node> 
         <export>yes</export> 
         <enabled>yes</enabled> 
         <blocksa>No</blocksa> 
         <blockua>No</blockua> 
         <blockga>No</blockga> 
         <blockC0>Yes</blockC0> 
         <!-- <irdeto>0000000000000000</irdeto> 
         <irdeto>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto> 
         <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk> 
         <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk> --> 
         <boxkey>0000000000</boxkey> 
         <rsa>0000000000</rsa> 
         <PTShandshake>no</PTShandshake> 
         <crypto>no</crypto> 
         <carddetect>yes</carddetect> 
         <newcamd_port>34300</newcamd_port> 
         <autosid>Yes</autosid> 
         <priority>round</priority> 
         <reset>normal</reset> 
         <Seca>no</Seca> 
         <pincode>0000</pincode> 
      </device> 
    </readers> 
      <cache> 
         <emm>20</emm> 
         <ecm>-1</ecm> 
      </cache> 
   <httpd> 
      <server> 
         <port>8080</port> 
         <enabled>yes</enabled> 
      </server> 
      <user> 
         <name>newcs</name> 
         <password>newcs</password> 
         <accesslevel>admin</accesslevel> 
      </user> 
   </httpd> 
   <debug> 
         <password>newcs</password> 
         <level>normal</level> 
         <type>init,emm</type> 
         <output>console,tcp</output> 
         <console_options>normal,init</console_options> 
         <tcp_port>1001</tcp_port> 
         <tcp_options>normal,init</tcp_options> 
   </debug> 
   <newcamdserver> 
      <enabled>yes</enabled> 
      <name>cardserv</name> 
      <deskey>11 12 13 14 15 16 17 18 19 10 11 12 13 14</deskey> 
      <user> 
         <name>user1</name> 
         <password>pass1</password> 
         <hostname></hostname> 
         <port></port> 
         <au>yes</au> 
         <spider>no</spider> 
         <sidoverride>no</sidoverride> 
         <rate>2</rate> 
      </user>    
      <user> 
         <name>user2</name> 
         <password>pass2</password> 
         <hostname></hostname> 
         <port></port> 
         <au>yes</au> 
         <spider>no</spider> 
         <sidoverride>no</sidoverride> 
         <rate>2</rate> 
      </user>    
   </newcamdserver> 
</newCSconfig>

<newCSconfig>
    <readers name="Card Readers">
        <device>
            <name>lower</name>
            <type>sci</type>
            <mhz>357</mhz>
            <node>/dev/sci0</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <boxkey>00000000</boxkey>
            <!-- <rsa>0000000000</rsa> -->
            <irdeto-camkey>0000000000000000</irdeto-camkey>
            <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
            <crypto-special>No</crypto-special>
            <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
            <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>34000</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode> 
            <priority>round</priority>
        </device>
        <!-- <device> -->
            <name>upper</name>
            <type>sci</type>
            <mhz>357</mhz>
            <node>/dev/sci1</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <boxkey>00000000</boxkey>
            <!-- <rsa>0000000000</rsa> -->
            <irdeto-camkey>0000000000000000</irdeto-camkey>
            <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
            <crypto-special>No</crypto-special>
            <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
            <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>34001</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode> 
            <priority>round</priority>
        <!-- </device> -->
    </readers>
    <cache>
            <emm>20</emm>
            <ecm>-1</ecm>
    </cache>
    <httpd>
        <server> <!-- Port to accept connections on -->
            <port>8080</port>
            <enabled>yes</enabled>
        </server>
        <user>
            <!-- valid value for userfile are:
             Any username you'd like - Used for browser to logon (its case sensitive).    -->
            <name>newcs</name>
 
            <!-- valid value for password are:
             Any password you'd like - Used for browser to logon (its case sensitive).    -->
            <password>newcs</password>
 
            <!-- valid value for accesslevel are:
             admin, stats - Define what rights the user has in the web-console    -->
            <accesslevel>admin</accesslevel>
        </user>
    </httpd>    
    <debug>
            <password>NewCSpwd</password>    
            <level>normal</level>
            <type>init</type>
            <output>console,tcp</output>
            <console_options>normal,init</console_options>
            <tcp_port>1001</tcp_port>
            <tcp_options>normal,init</tcp_options>
    </debug>
    <newcamdserver>
            <enabled>Yes</enabled>
            <name>newcs</name>
            <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
            <user>
                <name>nameserverbox</name>
                <password>pwserverbox</password>
                <hostname>localhost</hostname>
                <port>12000</port>
                <au>on</au>
                <sidoverride>off</sidoverride>
                <spider>No</spider>
            </user>
            <user>
                <name>nameclientbox</name>
                <password>pwclientbox</password>
                <hostname>localhost</hostname>
                <port>12000</port>
                <au>on</au>
                <sidoverride>off</sidoverride>
                <spider>No</spider>
            </user>
    </newcamdserver>
</newCSconfig>
newcam.dlist
CWS = 127.0.0.1 34000 nameserverbox pwserverbox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
 
mg_cfg
 
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
 
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
 
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
 
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }
 
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
 
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
 
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
 
# network ecm timeout in seconds
K: { 05 }
 
# newcamd dead routes connect retry, sec
Q: { 600 }
 
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
 
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
 
# on screen display Options, summ of:
# 01 show emu ecm 
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
 
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
 
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
 
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time 
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
 
# reread files, summ of: 
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
 
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
 
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 12 }

C: 192.168.1.1 20000 user pass

#C: url port username password

CWS_KEEPALIVE = 300 
CWS = 127.0.0.1 10100 localuser1 localuser1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver 
CWS = 127.0.0.1 10101 localuser2 localuser2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver

<newCSconfig> 
    <readers> 
        <device> 
            <name>lower</name> 
            <type>sci</type> 
         <mhz>357</mhz> 
         <node>/dev/sci0</node> 
         <parity>odd</parity> 
         <reset>normal</reset> 
         <export>Yes</export> 
         <enabled>Yes</enabled> 
         <blocksa>No</blocksa> 
         <blockua>No</blockua> 
         <blockga>No</blockga> 
         <boxkey>0000000000</boxkey> 
         <PTShandshake>No</PTShandshake> 
         <carddetect>yes</carddetect> 
         <newcamd_port>10100</newcamd_port> 
         <autosid>Yes</autosid> 
         <Seca>no</Seca> 
         <pincode>0000</pincode> 
         <priority>round</priority> 
        </device> 

        <device> 
            <name>upper</name> 
            <type>sci</type> 
         <mhz>357</mhz> 
         <node>/dev/sci1</node> 
         <parity>odd</parity> 
         <reset>normal</reset> 
         <export>Yes</export> 
         <enabled>No</enabled> 
         <blocksa>No</blocksa> 
         <blockua>No</blockua> 
         <blockga>No</blockga> 
         <boxkey>0000000000</boxkey> 
         <PTShandshake>No</PTShandshake> 
         <carddetect>yes</carddetect> 
         <newcamd_port>10101</newcamd_port> 
         <autosid>Yes</autosid> 
         <Seca>no</Seca> 
         <pincode>0000</pincode> 
         <priority>round</priority> 
         </device> 
   </readers> 

        <cache> 
                <emm>10</emm> 
                <ecm>10</ecm> 
        </cache> 
        <httpd> 
                <server> <Port> 
                        <port>11000</port> 
                        <enabled>yes</enabled> 
                </server> 
                <user> 
                        <name>root</name> 
                        <password>relook</password> 
                        <accesslevel>admin</accesslevel> 
                </user> 
        </httpd> 
        <debug> 
                <level>normal</level> 
                <type>init</type> 
                <output>console</output> 
                <logfile></logfile> 
                <console_options></console_options> 
                <file_options></file_options> 
        </debug> 
        <newcamdserver> 
                <enabled>yes</enabled> 
                <name>cardserv</name> 
      <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey> 
                <!-- <userfile>/tmp/users.txt</userfile> --> 

                <user> 
                        <name>localuser1</name> 
                        <password>localuser1</password> 
                        <au>on</au> 
                </user> 
             
                <user> 
                        <name>localuser2</name> 
                        <password>localuser2</password> 
                        <au>on</au> 
                </user> 
        </newcamdserver> 
</newCSconfig>

<newCSconfig>
    <readers name="Card Readers">
        <device>
            <name>lower</name>
            <type>sci</type>
            <mhz>357</mhz>
            <node>/dev/sci0</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <boxkey>0000000000</boxkey>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>10100</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode>
            <priority>round</priority>
        </device>

        
    </readers>

        <cache>
                <emm>10</emm>
                <ecm>10</ecm>
        </cache>
        <httpd>
                <server> <!-- Port to accept connections on -->
                        <port>11000</port>
                        <enabled>yes</enabled>
                </server>
                <user>
                        <name>root</name>
                        <password>relook</password>
                        <accesslevel>admin</accesslevel>
                </user>
        </httpd>
        <debug>
                <level>normal</level>
                <type>init</type>
                <output>console</output>
                <logfile></logfile>
                <console_options></console_options>
                <file_options></file_options>
        </debug>
        <newcamdserver>
                <enabled>yes</enabled>
                <name>cardserv</name>
        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
                <!-- <userfile>/tmp/users.txt</userfile> -->

                <user>
                        <name>localuser1</name>
                        <password>localuser1</password>
                        <au>on</au>
                
                </user>
        </newcamdserver>
</newCSconfig>

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 02 }

# *** update (sum 01 or 02 with 04)
#    01 update only new ****, default setting
#    02 update all **** (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/****
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32    cccamd netclient, card list saved as /tmp/cccamd.info 
#        (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 02 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 01 } root newcs

# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm **** update
#    + web port to use for osd
S: { 03 } 8080

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.*** on channel change
#    04 reread SoftCam.*** if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 12 }

# map all 180x nagra caids to 1801
# default is 01
F: { 01 }