Neue V14 freischalten während noch die alte S02 läuft. Wie?

dodo83 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

Karte richtig rum im Slot?
poste bitte auch mal die Kompletten Configs und ein log ab start der OScam

luke1984 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

Ja Karte steckt mit dem Chip nach unten im Slot genau wie die S02.
Hier die kompletten Configs:

[global]
logfile = /tmp/oscam.log
clienttimeout = 9000
unlockparental = 1
nice = -1
maxlogsize = 200
waitforcards = 0
dropdups = 1
lb_mode = 1
lb_save = 100
lb_min_ecmcount = 4
lb_savepath = /tmp/.oscam/oscam.stat
failbantime = 15
failbancount = 3

[dvbapi]
enabled = 1
au = 1
user = meinebox
boxtype = dreambox

[cccam]
port = 12000
reshare = 1
version = 2.3.0
keepconnected = 1
stealth = 1

[webif]
httpport = 83
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.1-10.255.255.255
appendchaninfo = 1

[account]
user = meinebox
uniq = 3
au = 1
betatunnel = 1833.FFFF:1702
group = 1
cccmaxhops = 15
cccreshare = 15
cccignorereshare = 1

[account]
user = wohnzimmer
pwd = rudi
uniq = 3
group = 1,2
caid = 1702,1833,1830
services = S02

[reader]
label = v14
description = V14-Sky
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-unknown = 1
ndsversion = 2

# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = S02
protocol = internal
device = /dev/sci1
caid = 1702,1833
detect = cd
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 0
blockemm-g = 1
blockemm-u = 1

P: 0D05 1
# Read more:

Sie müssen registriert sein, um Links zu sehen.

P: 098C
# Read more:

Sie müssen registriert sein, um Links zu sehen.

P: 1702

Brauch man die oscam.srvid??

Hier das Log:

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.

2015/06/17 20:06:51 76E0B5D8 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/17 20:06:51 76E0B5D8 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/06/17 20:06:51 76E0B5D8 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75131
2015/06/17 20:06:52 76E0B5D8 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/06/17 20:06:53 76E0B5D8 r (reader) v14 [internal] Card type: P1TV
2015/06/17 20:06:53 76E0B5D8 r (reader) v14 [internal] Rom version: 20AA
2015/06/17 20:06:53 76E0B5D8 r (reader) v14 [internal] Credit available on card: 0 euro
2015/06/17 20:06:53 76E0B5D8 r (reader) v14 [internal] Extended 4C detected
2015/06/17 20:06:53 76E0B5D8 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/06/17 20:06:53 76E0B5D8 r (reader) v14 [internal] found card system videoguard2
2015/06/17 20:06:53 76E0B5D8 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/17 20:06:53 76E0B5D8 r (reader) v14 [videoguard2] card detected
2015/06/17 20:06:53 76E0B5D8 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/17 20:06:54 76E0B5D8 r (reader) v14 [videoguard2] Deactivating card
2015/06/17 20:06:54 76E0B5D8 r (reader) v14 [videoguard2] creating thread for device /dev/sci0
2015/06/17 20:06:54 76D07FA0 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/06/17 20:06:54 76D07FA0 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et10000
2015/06/17 20:06:55 76D07FA0 r (reader) v14 [videoguard2] card detected
2015/06/17 20:07:03 76D07FA0 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/17 20:07:03 76D07FA0 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/17 20:07:03 76D07FA0 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/06/17 20:07:03 76D07FA0 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75127
2015/06/17 20:07:04 76D07FA0 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/06/17 20:07:05 76D07FA0 r (reader) v14 [internal] Card type: P1TV
2015/06/17 20:07:05 76D07FA0 r (reader) v14 [internal] Rom version: 20AA
2015/06/17 20:07:05 76D07FA0 r (reader) v14 [internal] Credit available on card: 0 euro
2015/06/17 20:07:05 76D07FA0 r (reader) v14 [internal] Extended 4C detected
2015/06/17 20:07:05 76D07FA0 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/06/17 20:07:05 76D07FA0 r (reader) v14 [internal] found card system videoguard2
2015/06/17 20:07:05 76D07FA0 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/17 20:07:05 76D07FA0 r (reader) v14 [videoguard2] card detected
2015/06/17 20:07:05 76D07FA0 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/17 20:07:06 76D07FA0 r (reader) v14 [videoguard2] Deactivating card
2015/06/17 20:07:06 76D07FA0 r (reader) v14 [videoguard2] creating thread for device /dev/sci0
2015/06/17 20:07:06 76E06788 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/06/17 20:07:06 76E06788 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et10000
2015/06/17 20:07:07 76E06788 r (reader) v14 [videoguard2] card detected
2015/06/17 20:07:15 76E06788 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/17 20:07:15 76E06788 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/17 20:07:15 76E06788 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/06/17 20:07:15 76E06788 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75127
2015/06/17 20:07:16 76E06788 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/06/17 20:07:17 76E06788 r (reader) v14 [internal] Card type: P1TV
2015/06/17 20:07:17 76E06788 r (reader) v14 [internal] Rom version: 20AA
2015/06/17 20:07:17 76E06788 r (reader) v14 [internal] Credit available on card: 0 euro
2015/06/17 20:07:17 76E06788 r (reader) v14 [internal] Extended 4C detected
2015/06/17 20:07:17 76E06788 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/06/17 20:07:17 76E06788 r (reader) v14 [internal] found card system videoguard2
2015/06/17 20:07:17 76E06788 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/17 20:07:17 76E06788 r (reader) v14 [videoguard2] card detected
2015/06/17 20:07:17 76E06788 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/17 20:07:18 76E06788 r (reader) v14 [videoguard2] Deactivating card
2015/06/17 20:07:18 76E06788 r (reader) v14 [videoguard2] creating thread for device /dev/sci0
2015/06/17 20:07:18 76E0B578 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/06/17 20:07:18 76E0B578 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et10000
2015/06/17 20:07:19 76E0B578 r (reader) v14 [videoguard2] card detected
2015/06/17 20:07:27 76E0B578 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/17 20:07:27 76E0B578 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/17 20:07:27 76E0B578 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/06/17 20:07:27 76E0B578 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75131
2015/06/17 20:07:28 76E0B578 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/06/17 20:07:29 76E0B578 r (reader) v14 [internal] Card type: P1TV
2015/06/17 20:07:29 76E0B578 r (reader) v14 [internal] Rom version: 20AA
2015/06/17 20:07:29 76E0B578 r (reader) v14 [internal] Credit available on card: 0 euro
2015/06/17 20:07:29 76E0B578 r (reader) v14 [internal] Extended 4C detected
2015/06/17 20:07:29 76E0B578 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/06/17 20:07:29 76E0B578 r (reader) v14 [internal] found card system videoguard2
2015/06/17 20:07:29 76E0B578 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/17 20:07:29 76E0B578 r (reader) v14 [videoguard2] card detected
2015/06/17 20:07:29 76E0B578 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/17 20:07:30 76E0B578 r (reader) v14 [videoguard2] Deactivating card
2015/06/17 20:07:30 76E0B578 r (reader) v14 [videoguard2] creating thread for device /dev/sci0
2015/06/17 20:07:30 76E090A0 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/06/17 20:07:30 76E090A0 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et10000
2015/06/17 20:07:31 76E090A0 r (reader) v14 [videoguard2] card detected
2015/06/17 20:07:39 76E090A0 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/17 20:07:39 76E090A0 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/17 20:07:39 76E090A0 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/06/17 20:07:39 76E090A0 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75131
2015/06/17 20:07:40 76E090A0 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/06/17 20:07:41 76E090A0 r (reader) v14 [internal] Card type: P1TV
2015/06/17 20:07:41 76E090A0 r (reader) v14 [internal] Rom version: 20AA
2015/06/17 20:07:41 76E090A0 r (reader) v14 [internal] Credit available on card: 0 euro
2015/06/17 20:07:41 76E090A0 r (reader) v14 [internal] Extended 4C detected
2015/06/17 20:07:41 76E090A0 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/06/17 20:07:41 76E090A0 r (reader) v14 [internal] found card system videoguard2
2015/06/17 20:07:41 76E090A0 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/17 20:07:41 76E090A0 r (reader) v14 [videoguard2] card detected
2015/06/17 20:07:41 76E090A0 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/17 20:07:42 76E090A0 r (reader) v14 [videoguard2] Deactivating card
2015/06/17 20:07:42 76E090A0 r (reader) v14 [videoguard2] creating thread for device /dev/sci0
2015/06/17 20:07:42 76E06710 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/06/17 20:07:42 76E06710 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et10000
2015/06/17 20:07:43 76E06710 r (reader) v14 [videoguard2] card detected
2015/06/17 20:07:51 76E06710 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/17 20:07:51 76E06710 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/17 20:07:51 76E06710 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/06/17 20:07:51 76E06710 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75132
2015/06/17 20:07:52 76E06710 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/06/17 20:07:53 76E06710 r (reader) v14 [internal] Card type: P1TV
2015/06/17 20:07:53 76E06710 r (reader) v14 [internal] Rom version: 20AA
2015/06/17 20:07:53 76E06710 r (reader) v14 [internal] Credit available on card: 0 euro
2015/06/17 20:07:53 76E06710 r (reader) v14 [internal] Extended 4C detected
2015/06/17 20:07:53 76E06710 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/06/17 20:07:53 76E06710 r (reader) v14 [internal] found card system videoguard2
2015/06/17 20:07:53 76E06710 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/17 20:07:53 76E06710 r (reader) v14 [videoguard2] card detected
2015/06/17 20:07:53 76E06710 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/17 20:07:54 76E06710 r (reader) v14 [videoguard2] Deactivating card
2015/06/17 20:07:54 76E06710 r (reader) v14 [videoguard2] creating thread for device /dev/sci0
2015/06/17 20:07:54 76E0B560 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/06/17 20:07:54 76E0B560 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et10000
2015/06/17 20:07:55 76E0B560 r (reader) v14 [videoguard2] card detected
2015/06/17 20:08:03 76E0B560 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/17 20:08:03 76E0B560 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/17 20:08:03 76E0B560 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/06/17 20:08:03 76E0B560 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75129
2015/06/17 20:08:04 76E0B560 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/06/17 20:08:05 76E0B560 r (reader) v14 [internal] Card type: P1TV
2015/06/17 20:08:05 76E0B560 r (reader) v14 [internal] Rom version: 20AA
2015/06/17 20:08:05 76E0B560 r (reader) v14 [internal] Credit available on card: 0 euro
2015/06/17 20:08:05 76E0B560 r (reader) v14 [internal] Extended 4C detected
2015/06/17 20:08:05 76E0B560 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/06/17 20:08:05 76E0B560 r (reader) v14 [internal] found card system videoguard2
2015/06/17 20:08:05 76E0B560 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/17 20:08:05 76E0B560 r (reader) v14 [videoguard2] card detected
2015/06/17 20:08:05 76E0B560 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/17 20:08:06 76E0B560 r (reader) v14 [videoguard2] Deactivating card
2015/06/17 20:08:06 76E0B560 r (reader) v14 [videoguard2] creating thread for device /dev/sci0
2015/06/17 20:08:06 76E08F08 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/06/17 20:08:06 76E08F08 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et10000
2015/06/17 20:08:07 76E08F08 r (reader) v14 [videoguard2] card detected

dia · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

group ist nich 1
sondern eine bekommt group 1
der andere group 2

dodo83 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

hier sieht das log schon ganz anders aus
nimm mal raus

Code:

[COLOR=#333333]ins7e11 = 15[/COLOR]

und starte die Box neu
eventuell mal mit CARDMHZ auf 357 testen
AUTOSPEED auch mal auf 1 setzen

luke1984 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

Soll ich Group 2 beim V14 Reader machen?

dodo83 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

kannst auch 3 oder 4 eintragen
erstmal sollte die Karte aber richtig eingelesen werden
laut deinem log wird die es andauernd neu

luke1984 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

Kann es vielleicht sein das die von Sky mir bereits eine gepairte Karte geschickt haben?
Habe nämlich folgende E-mail von Sky erhalten:

"sehr geehrter Kunde,
Ihre neue Smartcard wurde bereits aktiviert. Sollten Sie einen neuen Receiver von uns erhalten haben, nehmen Sie diesen bitte gemäß Anleitung in Betrieb, stecken Sie die Smartcard in Ihren Receiver und schalten Sie auf einen abonnierten Sender von Sky (z. B. Sky Sport News HD). Sie sehen auf dem Bildschirm den Hinweis "Ihre Smartcard ist nicht freigeschaltet." Innerhalb von 30 Minuten empfängt Ihre Smartcard automatisch das Freischaltsignal und der Hinweis verschwindet. Sobald dieser ausgeblendet ist, können Sie alle von Ihnen abonnierten Sender von Sky empfangen."

Kann man das überprüfen ob eventuell die Karte bereits gepairt ist?

dodo83 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

nein
kann nicht sein
laut deinem letztem Log wird diese nur ständig neu eingelesen

wie wär es wenn du jetzt einfach mal die Vorschläge ausprobierst

luke1984 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

Ok hier eine neues log; den S02 Reader hab ich auf pausieren gestellt)

2015/06/17 20:59:30 0 s (anticasc) anti cascading disabled
2015/06/17 20:59:30 58A1F8 p (reader) ORF_EMU [constcw] proxy initialized, server /usr/keys/SoftCam.Key:0
2015/06/17 20:59:30 58A7E8 c (client) plain dvbapi-client granted (meinebox, au=auto (3 reader))
2015/06/17 20:59:30 58A7E8 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
2015/06/17 20:59:30 58A7E8 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/06/17 20:59:30 58AEF8 h (webif) webif: decompressed 159525 bytes back into 381832 bytes
2015/06/17 20:59:30 58AEF8 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/06/17 20:59:31 58A7E8 c (dvbapi) Demuxer 0 found 0 ECMpids and 4 STREAMpids in PMT
2015/06/17 20:59:31 58A7E8 c (dvbapi) Demuxer 0 serving srvid C60C (FFFE:C60C unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0068
2015/06/17 20:59:31 589BE8 r (reader) v14 [internal] card detected
2015/06/17 20:59:31 589BE8 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/17 20:59:31 589BE8 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/17 20:59:31 589BE8 r (reader) v14 [internal] Calculated work ETU is 18.60 us reader mhz = 500
2015/06/17 20:59:35 590C18 c (client) encrypted cccam-client 192.168.178.64 granted (wohnzimmer, au=off)
2015/06/17 20:59:37 589BE8 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 5999340
2015/06/17 20:59:38 589BE8 r (reader) v14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] Card type: P1TV
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] Rom version: 20AA
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] Credit available on card: 0 euro
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] Extended 4C detected
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] FuseByte: 00
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] Region Code:
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] Country Code: DEU
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] Pincode read: 8106
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] PCB settings: FF FF FF FF
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] Parental control disabled
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] ready for requests
2015/06/17 20:59:39 589BE8 r (reader) v14 [internal] found card system videoguard2
2015/06/17 20:59:39 589BE8 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/17 20:59:39 589BE8 r (reader) v14 [videoguard2] card detected
2015/06/17 20:59:39 589BE8 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/17 20:59:39 589BE8 r (reader) v14 [videoguard2] ------------------------------------------------------------------
2015/06/17 20:59:39 589BE8 r (reader) v14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/06/17 20:59:39 589BE8 r (reader) v14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/06/17 20:59:39 589BE8 r (reader) v14 [videoguard2] |------- This card is not active, so no package available! ------|
2015/06/17 20:59:40 589BE8 r (reader) v14 [videoguard2] ------------------------------------------------------from-ins70--

Wird die Karte jetzt richtig eingelesen?

dia · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

sieht super aus

luke1984 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

Na endlich, Danke für eure Hilfe:emoticon-0157-sun:
Hab jetzt den V14 Reader so:
[reader]
label = v14
description = V14-Sky
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 500
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

Das mit mhz auf 500 hab ich in einem anderen Forum gelesen.

Wie muss ich jetzt weitervorgehen um die Karte erfolgreich zu aktivieren?

dia · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

jetzt sollte der user so aussehen

[account]
user = local
caid = 098C
au = v14
group = 2

dodo83 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

die ET hat eher ein Problem mit dem Fastmode

um die Karte zu aktivieren musst du die 2 richtigen EMM manuell schreiben

luke1984 · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

Muss ich den S02 Reader deaktivieren und ein Freischaltsignal von Sky anfordern und warten bis die 2 richtigen EMM's kommen? Oder kann der S02 Reader auch aktiviert bleiben damit ich in der Zeit sky schauen kann?

dia · 17. Juni 2015

AW: Neue V14 freischalten während noch die alte S02 läuft. Wie?

lass die s02 noch raus
mach doch erst das eine zu ende

sieht dein localer user so aus

Suche

Suche

Neue V14 freischalten während noch die alte S02 läuft. Wie?

dodo83

luke1984

Freak

dia

DEB Inventar

dodo83

luke1984

Freak

dodo83

luke1984

Freak

dodo83

luke1984

Freak

dia

DEB Inventar

luke1984

Freak

dia

DEB Inventar

dodo83

luke1984

Freak

dia

DEB Inventar

Ähnliche Themen

Spenden Unterstützung