adventure
Stamm User
- Registriert
- 24. Oktober 2009
- Beiträge
- 1.112
- Reaktionspunkte
- 64
- Punkte
- 935
Hallo
ich habe das Probleme dass nach gewisser Zeit Mgcamd einfriert und nichts geht mehr
Zur Hardware:
- Dreambox 7020HD OE 2.0 CVS Image
- Mgcamd 1.38 als Softcam
- Oscam r8699 auf Igel Pc als Server
Mgcamd.cfg
Mgcamd.log
oscam log
ich habe das Probleme dass nach gewisser Zeit Mgcamd einfriert und nichts geht mehr
Zur Hardware:
- Dreambox 7020HD OE 2.0 CVS Image
- Mgcamd 1.38 als Softcam
- Oscam r8699 auf Igel Pc als Server
Mgcamd.cfg
Code:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 04 } 127.0.0.1 27002 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }Mgcamd.log
Code:
[mg0] WARNING, both cws changed !
[mg0] 291 msec -- Fri Mar 21 12:57:00 2014
system: Cryptoworks
caid: 0x0D00
pid: 0x182e
prov: 0000C0
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[mg0] <- CW from newcamd xxxx.dlinkddns.com:27002 (2636ms)
[mg0] 2636 msec -- Fri Mar 21 12:57:14 2014
system: Cryptoworks
caid: 0x0D00
pid: 0x182e
prov: 0000C0
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[newcamd] EMM-S -> xxxx.dlinkddns.com:27002
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[newcamd] EMM answer from xxxx.dlinkddns.com:27002, 3:84
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[newcamd] EMM-S -> xxxx.dlinkddns.com:27002
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[newcamd] EMM answer from xxxx.dlinkddns.com:27002, 3:84
[mg0] <- CW from newcamd xxxx.dlinkddns.com:27002 (2447ms)
[mg0] WARNING, both cws changed !
[mg0] 2447 msec -- Fri Mar 21 12:58:12 2014
system: Cryptoworks
caid: 0x0D00
pid: 0x182e
prov: 0000C0
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002
[mg0] <- CW from newcamd xxxx.dlinkddns.com:27002(1108ms)
[mg0] 1108 msec -- Fri Mar 21 12:58:17 2014
system: Cryptoworks
caid: 0x0D00
pid: 0x182e
prov: 0000C0
[mg0] -> ECM to newcamd xxxx.dlinkddns.com:27002oscam log
Code:
2014/03/21 13:40:10 93DFD88 c client connected to 27002 port
2014/03/21 13:40:10 93DFD88 c encrypted newcamd:27002-client xxxx.dlinkddns.com:27002 granted (test, au=auto (2 reader))
2014/03/21 13:40:10 93DFD88 c user test authenticated successfully (mgcamd)
2014/03/21 13:40:10 93DFD88 c AU enabled for user test on reader digiturk
2014/03/21 13:40:10 93DFD88 c SID list will not be send to mgcamd client.
