Information ausblenden
Das Digital Eliteboard ist ein Kostenloses Forum. Wenn du alle Bereiche sehen möchtest oder Fragen hast, musst du dich zunächst Registrieren.

Jetzt Registrieren

Problem log cfe error!!

Dieses Thema im Forum "Cloud Ibox" wurde erstellt von MANIAS21, 25. Dezember 2013.

  1. MANIAS21

    MANIAS21 Newbie

    15. Februar 2011
    Punkte für Erfolge:
    Linux version 3.1.1 ( (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #1 Sat Nov 2 17:12:37 CET 2013
    Fetching vars from bootloader... found 7 vars.
    Options: sata=0 enet=1 emac_1=0 no_mdio=0 docsis=0 pci=1 smp=0 moca=0 usb=1
    Using 256 MB RAM (from straps)
    CPU revision is: 0101954c (Brcm4380)
    FPU revision is: 01739300
    Determined physical RAM map:
    memory: 10000000 @ 00000000 (usable)
    bmem: adding 144 MB RESERVED region at 112 MB (0x09000000@0x07000000)
    Zone PFN ranges:
    Normal 0x00000000 -> 0x00010000
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00010000
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
    Kernel command line: bmem=144M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw console=ttyS0,115200n8 rootflags=sync
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
    Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
    MIPS secondary cache 128kB, 8-way, linesize 128 bytes.
    Writing ErrCtl register=0080000e
    Readback ErrCtl register=0080000e
    L2 cache parity protection enabled
    Memory: 106036k/262144k available (4855k kernel code, 156108k reserved, 1174k data, 208k init, 0k highmem)
    Detected MIPS clock frequency: 332 MHz (166.499 MHz counter)
    Console: colour dummy device 80x25
    Calibrating delay loop... 220.16 BogoMIPS (lpj=110080)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 512
    devtmpfs: initialized
    NET: Registered protocol family 16
    PCI2.3->SDRAM window: 512 MB
    bio: create slab <bio-0> at 0
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Advanced Linux Sound Architecture Driver Version 1.0.24.
    Bluetooth: Core ver 2.16
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    Switching to clocksource upg
    NET: Registered protocol family 2
    IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
    TCP: Hash tables configured (established 8192 bind 8192)
    TCP reno registered
    UDP hash table entries: 256 (order: 0, 4096 bytes)
    UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    Installing knfsd (copyright (C) 1996
    fuse init (API version 7.17)
    msgmni has been set to 207
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
    console [ttyS0] enabled
    serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
    loop: module loaded
    Broadcom STB NAND controller (BrcmNand Controller)
    bcmemac: Broadcom STB 10/100 EMAC driver v3.0
    bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1d:ec:00:37:34)
    usbcore: registered new interface driver zd1201
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    brcm-pm: enabling usb clocks
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    ehci-brcm ehci-brcm.1: irq 63, io mem 0x10480500
    ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
    ohci-brcm ohci-brcm.0: irq 64, io mem 0x10480400
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 0
    ohci-brcm ohci-brcm.1: irq 59, io mem 0x10480600
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 1 port detected
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    lirc_dev: IR Remote Control driver registered, major 254
    IR NEC protocol handler initialized
    IR RC5(x) protocol handler initialized
    IR RC6 protocol handler initialized
    IR JVC protocol handler initialized
    IR Sony protocol handler initialized
    IR RC5 (streamzap) protocol handler initialized
    IR MCE Keyboard/mouse protocol handler initialized
    IR LIRC bridge handler initialized
    Bluetooth: Generic Bluetooth USB driver ver 0.6
    usbcore: registered new interface driver btusb
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    ALSA device list:
    No soundcards found.
    TCP cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    lib80211: common routines for IEEE802.11 drivers
    Registering the dns_resolver key type
    EBI CS0: setting up NAND flash (primary)
    mtd->oobsize=0, mtd->eccOobSize=0
    B4: NandSelect=40000101, nandConfig=55042200, chipSelect=0
    brcmnand_read_id: CS0: dev_id=ecf18015
    After: NandSelect=40000101, nandConfig=55042200
    Block size=00020000, erase shift=17
    NAND Config: Reg=55042200, chipSize=128 MB, blockSize=128K, erase_shift=11
    busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
    BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS0

    Found NAND on CS0: ACC=d3000000, cfg=55042200, flashId=ecf10015, tim1=4232222d, tim2=00000d94
    BrcmNAND version = 0x0200 128MB @00000000
    B4: NandSelect=40000101, nandConfig=55042200, chipSelect=0
    brcmnand_read_id: CS0: dev_id=ecf18015
    After: NandSelect=40000101, nandConfig=55042200
    Found NAND flash on Chip Select 0, chipSize=128MB, usable size=128MB, base=0
    brcmnand_scan: B4 nand_select = 40000101
    brcmnand_scan: After nand_select = 40000101
    page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
    Brcm NAND controller version = 2.0 NAND flash size 128MB @18000000
    ECC layout=brcmnand_oob_bch4_4k
    brcmnand_scan: mtd->oobsize=64
    brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
    brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
    brcmnand_default_bbt: bbt_td = bbt_main_descr
    Creating 7 MTD partitions on "brcmnand.0":
    0x000000000000-0x000007400000 : "rootfs"
    0x000007400000-0x000007800000 : "kernel"
    0x000007800000-0x000007c00000 : "boot"
    0x000007c00000-0x000007d00000 : "cfe"
    0x000007d00000-0x000007d80000 : "mac"
    0x000007d80000-0x000007e00000 : "env"
    0x000007e00000-0x000007f00000 : "nvm"
    UBI: attaching mtd0 to ubi0
    UBI: physical eraseblock size: 131072 bytes (128 KiB)
    UBI: logical eraseblock size: 126976 bytes
    UBI: smallest flash I/O unit: 2048
    UBI: VID header offset: 2048 (aligned 2048)
    UBI: data offset: 4096
    UBI: max. sequence number: 130
    UBI: attached mtd0 to ubi0
    UBI: MTD device name: "rootfs"
    UBI: MTD device size: 116 MiB
    UBI: number of good PEBs: 928
    UBI: number of bad PEBs: 0
    UBI: number of corrupted PEBs: 0
    UBI: max. allowed volumes: 128
    UBI: wear-leveling threshold: 4096
    UBI: number of internal volumes: 1
    UI: number of user volumes: 1
    UBI: available PEBs: 0
    UBI: total number of reserved PEBs: 928
    UBI: number of PEBs reserved for bad PEB handling: 9
    UBI: max/mean erase counter: 2/0
    UBI: image sequence number: 754986340
    UBIFS: parse sync
    UBI: background thread "ubi_bgt0d" started, PID 37
    UBIFS: recovery needed
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: file system size: 114786304 bytes (112096 KiB, 109 MiB, 904 LEBs)
    UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
    UBIFS: media format: w4/r0 (latest is w4/r0)
    UBIFS: default compressor: lzo
    UBIFS: reserved for root: 0 bytes (0 KiB)
    VFS: Mounted root (ubifs filesystem) on device 0:13.
    devtmpfs: mounted
    Freeing unused kernel memory: 208k freed
    INIT: version 2.88 booting
    dvb_bcm7325: module license 'Proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    DVB: registering new adapter (vusolo)
    bcm7325: hotplug_callback():
    Hotplug - status.connected 0
    CPU 0 Unable to handle kernel paging request at virtual address c074b2b0, epc == c074b2b0, ra == 8005c850
    Cpu 0
    $ 0 : 00000000 fffffff8 c074b2b0 00000000
    $ 4 : 0000000d c0bac354 00020000 8603a774
    $ 8 : 31008400 1000001f 00000000 f0000000
    $12 : 00000000 00000000 00000001 7faec518
    $16 : 8620ef00 00010000 00000000 00000000
    $20 : 0000000d 805b071c 805b0000 80620000
    $24 : 00000123 77648710
    $28 : 86046000 86047bc0 8053e438 8005c850
    Hi : 00000390
    Lo : 0001b79c
    epc : c074b2b0 0xc074b2b0
    Tainted: P
    ra : 8005c850 handle_irq_event_percpu+0x78/0x298
    Status: 31008002 KERNEL EXL
    Cause : 10800008
    BadVA : c074b2b0
    @rId : 0101954c (Brcm4380)
    Modules linked in: procmk
    Process mdev (pid: 70, threadinfo=86046000, task=864145a8, tls=77740490)
    Stack : 805adc80 00000000 805afa40 8000af24 00000003 3b9aca00 805b071c 00010000
    00000020 00000000 b000 000 00000002 fffffbff 00000000 00000000 8005caa8
    26ed0797 00000009 26fb3f80 00000009 805b071c 8005ed24 86c184e0 86c18468
    805b38b8 00000003 00000000 00000000 00000001 8005c138 805afa40 805b0000
    00000068 805b2d80 00000000 80005568 7fffffff 8004606c 86c18468 00000001
    Call Trace:
    [<8000af24>] mips_next_event+0x14/0x40
    [<8005caa8>] handle_irq_event+0x38/0x60
    [<8005ed24>] handle_level_irq+0x98/0x134
    [<8005c138>] generic_handle_irq+0x48/0x58
    [<80005568>] do_IRQ+0x18/0x30
    [<8004606c>] hrtimer_interrupt+0x1bc/0x480
    [<80001fe8>] plat_irq_dispatch+0xf0/0x1a4
    [<8001e5b4>] activate_task.constprop.112+0x68/0x90
    [<80003a6c>] ret_from_irq+0x0/0x4
    [<80066938>] filemap_fault+0x0/0x4e0
    [<80080f90>] __do_fault+0x88/0x608
    [<8006694c>] filemap_fault+0x14/0x4e0
    [<8005268c>] tick_dev_program_event+0x7c/0x1d8
    [<80080f90>] __do_fault+0x88/0x608
    [<80084634>] handle_pte_fault+0xa4/0x89c
    [<80087a30>] unlink_file_vma+0x44/0x70
    [<80084edc>] handle_mm_fault+0xb0/0xf4
    [<8000e088>] do_page_fault+0x128/0x320
    [<800876bc>] remove_vma+0x64/0xac
    [<800887bc>] do_munmap+0x1d0/0x30c
    [<80089d68>] sys_munmap+0x4c/0x68
    [<80003a60>] ret_from_exception+0x0/0xc

    Code: (Bad address in epc)

    ---[ end trace d885bd57fafe464d ]---
    Kernel panic - not syncing: Fatal exception in interrupt
    Rebooting in 180 seconds..

Direkt Antworten

Der Entwurf wurde gespeichert Der Entwurf wurde gelöscht

Diese Seite empfehlen

OK Mehr information

Diese Seite verwendet Cookies. Mit Ihrem Klick auf OK stimmen Sie der Verwendung von Cookies zu. Andernfalls ist die Funktionalität dieser Website beschränkt.