-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Feb 13 22:45:18 2014
-------------------------------------------------------------------------------
2014/02/13 22:45:18 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9474 (arm-linux-gnueabi)
2014/02/13 22:45:18 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 9018
2014/02/13 22:45:18 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/02/13 22:45:18 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2014/02/13 22:45:18 0 s signal handling initialized
2014/02/13 22:45:18 0 s 126 service-id's loaded in 1ms
2014/02/13 22:45:18 0 s cccam: initialized (fd=5, port=xxxxxxx)
2014/02/13 22:45:18 0 s SKYV14 [
smartreader] creating thread for device Serial:Reader xxxxxxx
2014/02/13 22:45:18 0 s smargohdplus [
smartreader] creating thread for device Serial:Reader xxxxxxxx
2014/02/13 22:45:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/02/13 22:45:18 0 s waiting for local card init
2014/02/13 22:45:18 332C18 r SKYV14 [
smartreader] De SR_init
2014/02/13 22:45:18 332C18 r SKYV14 [
smartreader] initing smargo type SR
2014/02/13 22:45:18 332C18 r SKYV14 [
smartreader] Using 0x01/0x82 as endpoint for
smartreader hardware detection
2014/02/13 22:45:18 334918 r smargohdplus [
smartreader] De SR_init
2014/02/13 22:45:18 3455D8 h webif: decompressed 66339 bytes back into 194020 bytes
2014/02/13 22:45:18 3455D8 h WARNING: Your http disk template /var/etc/picons/HEADER.tpl was created for an older revision of OSCam and was changed in original OSCam (1.20-unstable_svn,r8938). Please consider upgrading it!
2014/02/13 22:45:18 3455D8 h If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;2860674195;1.20-unstable_svn;9474;-->
2014/02/13 22:45:18 332C18 r Found reader with serial Reader xxxxxxxx at 001:007
2014/02/13 22:45:18 332C18 r Found
smartreader device Serial:Reader xxxxxxxx
2014/02/13 22:45:18 3455D8 h HTTP Server running. ip
2014/02/13 22:45:18 334918 r smargohdplus [
smartreader] initing smargo type SR
2014/02/13 22:45:18 334918 r smargohdplus [
smartreader] Using 0x01/0x82 as endpoint for
smartreader hardware detection
2014/02/13 22:45:18 332C18 r SKYV14 [
smartreader] Creating
smartreader thread.
2014/02/13 22:45:18 332C18 r SKYV14 [
smartreader] clocking for
smartreader with
smartreader protocol
2014/02/13 22:45:18 332C18 r SKYV14 [
smartreader] Reader initialized (device=Serial:Reader xxxxxxxx, detect=cd, mhz= AUTO, cardmhz=369)
2014/02/13 22:45:18 334918 r Found reader with serial Reader xxxxxxxxx at 001:004
2014/02/13 22:45:18 334918 r Found
smartreader device Serial:Reader xxxxxxxx
2014/02/13 22:45:18 334918 r smargohdplus [
smartreader] Creating
smartreader thread.
2014/02/13 22:45:18 334918 r smargohdplus [
smartreader] clocking for
smartreader with
smartreader protocol
2014/02/13 22:45:18 334918 r smargohdplus [
smartreader] Reader initialized (device=Serial:Reader xxxxxxxxxx, detect=cd, mhz= AUTO, cardmhz=343)
2014/02/13 22:45:19 334918 r smargohdplus [
smartreader] card detected
2014/02/13 22:45:19 334918 r smargohdplus [
smartreader] init card at 369 mhz
2014/02/13 22:45:19 332C18 r SKYV14 [
smartreader] card detected
2014/02/13 22:45:19 332C18 r SKYV14 [
smartreader] init card at 369 mhz
2014/02/13 22:45:23 332C18 r SKYV14 [
smartreader] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/02/13 22:45:23 332C18 r SKYV14 [
smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/02/13 22:45:23 332C18 r SKYV14 [
smartreader] Calculated work ETU is 17.42 us reader mhz = 534
2014/02/13 22:45:23 332C18 r SKYV14 [
smartreader] autospeed = 1
2014/02/13 22:45:23 332C18 r SKYV14 [
smartreader] Effective reader settings mhz =534 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
2014/02/13 22:45:24 334918 r smargohdplus [
smartreader] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/02/13 22:45:24 334918 r smargohdplus [
smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/02/13 22:45:24 334918 r smargohdplus [
smartreader] Calculated work ETU is 5.99 us reader mhz = 534
2014/02/13 22:45:24 334918 r smargohdplus [
smartreader] autospeed = 1
2014/02/13 22:45:24 334918 r smargohdplus [
smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2014/02/13 22:45:24 332C18 r SKYV14 [
smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for
smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/02/13 22:45:24 334918 r smargohdplus [
smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for
smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/02/13 22:45:24 334918 r smargohdplus [
smartreader] Card responded ok for ifsd request of 28
2014/02/13 22:45:25 332C18 r SKYV14 [
smartreader] Card type: P1TV
2014/02/13 22:45:25 332C18 r SKYV14 [
smartreader] Rom version: 20AA
2014/02/13 22:45:25 332C18 r SKYV14 [
smartreader] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2014/02/13 22:45:25 332C18 r SKYV14 [
smartreader] found card system videoguard2
2014/02/13 22:45:25 332C18 r SKYV14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/02/13 22:45:25 332C18 r SKYV14 [videoguard2] card detected
2014/02/13 22:45:25 332C18 r SKYV14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/02/13 22:45:25 332C18 r SKYV14 [
smartreader] Doing fast reset
2014/02/13 22:45:25 334918 r smargohdplus [
smartreader] detect native nagra card
2014/02/13 22:45:26 334918 r smargohdplus [
smartreader] found card system nagra
2014/02/13 22:45:26 334918 r smargohdplus [nagra] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/02/13 22:45:26 334918 r smargohdplus [nagra] ROM: D N A S P 1 4 2
2014/02/13 22:45:26 334918 r smargohdplus [nagra] REV: R e v G C 6
2014/02/13 22:45:26 334918 r smargohdplus [nagra] SER: ############
2014/02/13 22:45:26 334918 r smargohdplus [nagra] CAID: 1830
2014/02/13 22:45:26 334918 r smargohdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/02/13 22:45:26 334918 r smargohdplus [nagra] Prv.ID: 00 00 00 00
2014/02/13 22:45:26 334918 r smargohdplus [nagra] IRD ID: ############
2014/02/13 22:45:26 334918 r smargohdplus [nagra] active to: 2014/04/06 12:59
2014/02/13 22:45:26 334918 r smargohdplus [nagra] -----------------------------------------
2014/02/13 22:45:26 334918 r smargohdplus [nagra] |id |tier |valid from |valid to |
2014/02/13 22:45:26 334918 r smargohdplus [nagra] +----+--------+------------+------------+
2014/02/13 22:45:26 334918 r smargohdplus [nagra] |8011|0BEA |2013/09/05 |2014/10/11 |
2014/02/13 22:45:26 334918 r smargohdplus [nagra] |8011|0064 |2012/09/05 |2013/09/06 |
2014/02/13 22:45:26 334918 r smargohdplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/02/13 22:45:26 334918 r smargohdplus [nagra] -----------------------------------------
2014/02/13 22:45:26 332C18 r SKYV14 [
smartreader] Error activating card.
2014/02/13 22:45:26 334918 r smargohdplus [nagra] ready for requests
2014/02/13 22:45:27 332C18 r SKYV14 [
smartreader] Doing fast reset
2014/02/13 22:45:28 332C18 r SKYV14 [
smartreader] Error activating card.
2014/02/13 22:45:28 332C18 r SKYV14 [
smartreader] Doing fast reset
2014/02/13 22:45:29 332C18 r SKYV14 [
smartreader] Error activating card.
2014/02/13 22:45:30 332C18 r SKYV14 [
smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/02/13 22:45:30 332C18 r SKYV14 [
smartreader] card initializing error
2014/02/13 22:45:30 0 s init for all local cards done
2014/02/13 22:45:30 0 s anti cascading disabled