Laberthread : Neue Board-Image mit Oscam-1.3.1

ricohs · 18. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

So, hier die ergebnisse:

FDI ist aktiviert,

Log nach Oscam start mit smartreader und Serial:

2014/09/18 19:44:29 0 s >> OSCam << cardserver started, version 1.20-emu, build r9848 (mips-linux-uclibc-libusb)
2014/09/18 19:44:29 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 4426
2014/09/18 19:44:29 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/09/18 19:44:29 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/18 19:44:29 0 s signal handling initialized
2014/09/18 19:44:29 0 s 159 service-id's loaded in 8 ms
2014/09/18 19:44:29 0 s 161 tier-id's loaded
2014/09/18 19:44:29 0 s 4 provid's loaded
2014/09/18 19:44:29 0 s cccam: initialized (fd=6, port=12002)
2014/09/18 19:44:29 0 s Emulator [emu] creating thread for device Emulator
2014/09/18 19:44:29 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/18 19:44:29 0 s waiting for local card init
2014/09/18 19:44:29 581470 h webif: decompressed 153722 bytes back into 361960 bytes
2014/09/18 19:44:29 581470 h HTTP Server running. ip=0.0.0.0 port=16000
2014/09/18 19:44:29 554490 r Emulator [emu] Reader initialized (device=Emulator, detect=cd, mhz=357, cardmhz=357)
2014/09/18 19:44:30 0 s init for all local cards done
2014/09/18 19:44:30 0 s anti cascading disabled
2014/09/18 19:44:42 581470 h S02 [smartreader] Restarting reader
2014/09/18 19:44:42 581470 h S02 [smartreader] creating thread for device Serial:Reader 20BF866
2014/09/18 19:44:42 577340 r S02 [smartreader] Reader initialized (device=Serial:Reader 20BF866, detect=cd, mhz=600, cardmhz=600)
2014/09/18 19:45:05 577340 r S02 [smartreader] card detected
2014/09/18 19:45:11 577340 r S02 [smartreader] Error activating card.

nach Box start:

2014/09/18 19:49:45 0 s >> OSCam << cardserver started, version 1.20-emu, build r9848 (mips-linux-uclibc-libusb)
2014/09/18 19:49:45 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3245
2014/09/18 19:49:45 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/09/18 19:49:45 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/18 19:49:45 0 s signal handling initialized
2014/09/18 19:49:45 0 s 159 service-id's loaded in 10 ms
2014/09/18 19:49:45 0 s 161 tier-id's loaded
2014/09/18 19:49:45 0 s 4 provid's loaded
2014/09/18 19:49:45 0 s cccam: initialized (fd=6, port=12002)
2014/09/18 19:49:45 0 s Emulator [emu] creating thread for device Emulator
2014/09/18 19:49:45 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/18 19:49:45 0 s waiting for local card init
2014/09/18 19:49:45 554490 h webif: decompressed 153722 bytes back into 361960 bytes
2014/09/18 19:49:45 554490 h HTTP Server running. ip=0.0.0.0 port=16000
2014/09/18 19:49:45 565D18 r Emulator [emu] Reader initialized (device=Emulator, detect=cd, mhz=357, cardmhz=357)
2014/09/18 19:49:47 0 s init for all local cards done
2014/09/18 19:49:47 0 s anti cascading disabled
2014/09/18 19:50:07 554490 h S02 [smartreader] Restarting reader
2014/09/18 19:50:07 554490 h S02 [smartreader] creating thread for device Serial:Reader 20BF866
2014/09/18 19:50:07 5791D8 r S02 [smartreader] Reader initialized (device=Serial:Reader 20BF866, detect=cd, mhz=600, cardmhz=600)
2014/09/18 19:50:28 5791D8 r S02 [smartreader] card detected
2014/09/18 19:50:35 5791D8 r S02 [smartreader] Error activating card.
2014/09/18 19:50:49 0 --- Skipped 2 duplicated log lines ---
2014/09/18 19:50:49 5791D8 r S02 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/18 19:50:49 5791D8 r S02 [smartreader] card initializing error

musste reader Manuel starten.

Log mit Mouse einstellungen:

nach Oscam start:

2014/09/18 19:52:33 0 s >> OSCam << cardserver started, version 1.20-emu, build r9848 (mips-linux-uclibc-libusb)
2014/09/18 19:52:33 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3883
2014/09/18 19:52:33 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/09/18 19:52:33 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/18 19:52:33 0 s signal handling initialized
2014/09/18 19:52:33 0 s 159 service-id's loaded in 7 ms
2014/09/18 19:52:33 0 s 161 tier-id's loaded
2014/09/18 19:52:33 0 s 4 provid's loaded
2014/09/18 19:52:33 0 s cccam: initialized (fd=6, port=12002)
2014/09/18 19:52:33 0 s S02 [mouse] creating thread for device /dev/ttyUSB0
2014/09/18 19:52:33 0 s Emulator [emu] creating thread for device Emulator
2014/09/18 19:52:33 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/18 19:52:33 0 s waiting for local card init
2014/09/18 19:52:33 565D38 r S02 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=19 No such device)
2014/09/18 19:52:33 565D38 r S02 [mouse] Cannot open device: /dev/ttyUSB0
2014/09/18 19:52:33 554490 h webif: decompressed 153722 bytes back into 361960 bytes
2014/09/18 19:52:33 554490 h HTTP Server running. ip=0.0.0.0 port=16000
2014/09/18 19:52:33 567B68 r Emulator [emu] Reader initialized (device=Emulator, detect=cd, mhz=357, cardmhz=357)

log nach Box start:

2014/09/18 19:54:51 0 s >> OSCam << cardserver started, version 1.20-emu, build r9848 (mips-linux-uclibc-libusb)
2014/09/18 19:54:51 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3132
2014/09/18 19:54:51 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/09/18 19:54:51 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/18 19:54:51 0 s signal handling initialized
2014/09/18 19:54:51 0 s 159 service-id's loaded in 10 ms
2014/09/18 19:54:51 0 s 161 tier-id's loaded
2014/09/18 19:54:51 0 s 4 provid's loaded
2014/09/18 19:54:51 0 s cccam: initialized (fd=6, port=12002)
2014/09/18 19:54:51 0 s S02 [mouse] creating thread for device /dev/ttyUSB0
2014/09/18 19:54:51 0 s Emulator [emu] creating thread for device Emulator
2014/09/18 19:54:51 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/18 19:54:51 0 s waiting for local card init
2014/09/18 19:54:51 554490 h webif: decompressed 153722 bytes back into 361960 bytes
2014/09/18 19:54:51 554490 h HTTP Server running. ip=0.0.0.0 port=16000
2014/09/18 19:54:51 565D38 r S02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2014/09/18 19:54:51 567B68 r Emulator [emu] Reader initialized (device=Emulator, detect=cd, mhz=357, cardmhz=357)
2014/09/18 19:54:53 0 s init for all local cards done
2014/09/18 19:54:53 0 s anti cascading disabled
2014/09/18 19:55:08 565D38 r S02 [mouse] card detected
2014/09/18 19:55:10 565D38 r S02 [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/09/18 19:55:10 565D38 r S02 [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/09/18 19:55:10 565D38 r S02 [mouse] Calculated work ETU is 93.00 us reader mhz = 600
2014/09/18 19:55:10 565D38 r S02 [mouse] ATR Fsmax is 6 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/09/18 19:55:11 565D38 r S02 [mouse] detect irdeto tunneled nagra card
2014/09/18 19:55:11 565D38 r S02 [mouse] no rsa key configured -> using irdeto mode
2014/09/18 19:55:11 565D38 r S02 [mouse] detect irdeto card
2014/09/18 19:55:11 565D38 r S02 [mouse] caid: 1702, acs: 3.84, country code: GER
2014/09/18 19:55:11 565D38 r S02 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/09/18 19:55:14 565D38 r S02 [mouse] active providers: 2 (000000,000000)
2014/09/18 19:55:14 565D38 r S02 [mouse] found card system irdeto
2014/09/18 19:55:14 565D38 r S02 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/18 19:55:15 565D38 r S02 [irdeto] entitlements for provider: 2, id: 000000
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 0107, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 0108, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 7D2B, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 7D24, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 7D23, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 61BD, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 04BA, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 04C4, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 7D2C, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 7D2D, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 7D22, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03FF, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 05DC, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03F4, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03EC, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03EF, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03E9, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03ED, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03F3, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03F5, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03EB, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03F6, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03F9, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 0401, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 0402, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03F7, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 0403, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 0404, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03FA, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 041A, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 000F, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 7D21, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03DE, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03DF, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 0400, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03F1, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03EA, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03F2, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 7D27, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:15 565D38 r S02 [irdeto] chid: 03FD, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 00F0, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0515, date: 2008/01/19 - 2008/09/29
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 03E8, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0514, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 044C, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 00F5, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0069, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0102, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 026C, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 028B, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 028C, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 028D, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 028E, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 028F, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0290, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 029E, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0291, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0292, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0293, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0294, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0295, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 028A, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0298, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0299, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 029A, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 029B, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 029D, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 0103, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:16 565D38 r S02 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 0104, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 0105, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 0276, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 05F1, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 05FB, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 05DF, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 0607, date: 2014/05/12 - 2014/11/09
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 05E7, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 04CE, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 05DD, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 0608, date: 2014/05/12 - 2014/11/09
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 05E8, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:17 565D38 r S02 [irdeto] chid: 05DE, date: 2013/12/14 - 2014/08/25
2014/09/18 19:55:18 565D38 r S02 [irdeto] ready for requests

client ist hell

rolu2 · 18. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

Dann haben wir schon mal einen teilerfolg. Jetzt die HD+ dazu und wieder die Fritzbox neu starten
da auch mouseprotokoll

ricohs · 18. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

Karte läuft nicht, reader bringt bei mouse einstellungen fehler:

2014/09/18 21:12:14 0 s >> OSCam << cardserver started, version 1.20-emu, build r9848 (mips-linux-uclibc-libusb)
2014/09/18 21:12:14 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3006
2014/09/18 21:12:14 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/09/18 21:12:14 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/18 21:12:14 0 s signal handling initialized
2014/09/18 21:12:14 0 s 159 service-id's loaded in 10 ms
2014/09/18 21:12:14 0 s 161 tier-id's loaded
2014/09/18 21:12:14 0 s 4 provid's loaded
2014/09/18 21:12:14 0 s cccam: initialized (fd=6, port=12002)
2014/09/18 21:12:14 0 s HD01 [mouse] creating thread for device /dev/ttyUSB1
2014/09/18 21:12:14 0 s Emulator [emu] creating thread for device Emulator
2014/09/18 21:12:14 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/18 21:12:14 0 s waiting for local card init
2014/09/18 21:12:14 565D38 r HD01 [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
2014/09/18 21:12:14 565D38 r HD01 [mouse] Cannot open device: /dev/ttyUSB1
2014/09/18 21:12:14 554490 h webif: decompressed 153722 bytes back into 361960 bytes
2014/09/18 21:12:14 554490 h HTTP Server running. ip=0.0.0.0 port=16000
2014/09/18 21:12:14 567B68 r Emulator [emu] Reader initialized (device=Emulator, detect=cd, mhz=357, cardmhz=357)

bei smartreader einstellungen bringt er kein fehler aber Karte wird nicht aktiviert.

2014/09/18 21:17:25 0 s >> OSCam << cardserver started, version 1.20-emu, build r9848 (mips-linux-uclibc-libusb)
2014/09/18 21:17:25 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2980
2014/09/18 21:17:25 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/09/18 21:17:25 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/18 21:17:25 0 s signal handling initialized
2014/09/18 21:17:25 0 s 159 service-id's loaded in 10 ms
2014/09/18 21:17:25 0 s 161 tier-id's loaded
2014/09/18 21:17:25 0 s 4 provid's loaded
2014/09/18 21:17:25 0 s cccam: initialized (fd=6, port=12002)
2014/09/18 21:17:25 0 s HD01 [smartreader] creating thread for device Serial:Reader F3F61E3
2014/09/18 21:17:25 0 s Emulator [emu] creating thread for device Emulator
2014/09/18 21:17:25 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/18 21:17:25 554490 r HD01 [smartreader] Reader initialized (device=Serial:Reader F3F61E3, detect=cd, mhz=369, cardmhz=369)
2014/09/18 21:17:25 0 s waiting for local card init
2014/09/18 21:17:25 5838C0 h webif: decompressed 153722 bytes back into 361960 bytes
2014/09/18 21:17:25 5838C0 h HTTP Server running. ip=0.0.0.0 port=16000
2014/09/18 21:17:25 565CB8 r Emulator [emu] Reader initialized (device=Emulator, detect=cd, mhz=357, cardmhz=357)
2014/09/18 21:17:26 0 s init for all local cards done
2014/09/18 21:17:26 0 s anti cascading disabled
2014/09/18 21:17:43 554490 r HD01 [smartreader] card detected

2014/09/18 21:17:49 554490 r HD01 [smartreader] Error activating card

jeweils die Box neu gestartet.

rolu2 · 18. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

du sollst beide karte gleichzeitig testen. Wenn du die HD+ einzeln testen muss der device: /dev/ttyUSB0 sein

ricohs · 20. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

Hallo, ich habe jetzt mal den Reader gewechselt und mir eine Easymouse zugelegt, hier das ergebniss vom Log:

2014/09/20 13:45:11 0 s >> OSCam << cardserver started, version 1.20-emu, build r9848 (mips-linux-uclibc-libusb)
2014/09/20 13:45:11 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 4719
2014/09/20 13:45:11 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/09/20 13:45:11 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/20 13:45:11 0 s signal handling initialized
2014/09/20 13:45:11 0 s 171 service-id's loaded in 9 ms
2014/09/20 13:45:11 0 s 161 tier-id's loaded
2014/09/20 13:45:11 0 s 4 provid's loaded
2014/09/20 13:45:11 0 s cccam: initialized (fd=6, port=xxxx02)
2014/09/20 13:45:11 0 s hdplussat [mouse] creating thread for device /dev/ttyUSB0
2014/09/20 13:45:11 0 s Emulator [emu] creating thread for device Emulator
2014/09/20 13:45:11 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/20 13:45:11 0 s waiting for local card init
2014/09/20 13:45:11 554490 h webif: decompressed 153722 bytes back into 361960 bytes
2014/09/20 13:45:11 554490 h HTTP Server running. ip=0.0.0.0 port=16000
2014/09/20 13:45:11 567E50 r Emulator [emu] Reader initialized (device=Emulator, detect=cd, mhz=357, cardmhz=357)
2014/09/20 13:45:12 566020 r hdplussat [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2014/09/20 13:45:12 566020 r hdplussat [mouse] card detected
2014/09/20 13:45:14 566020 r hdplussat [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/20 13:45:14 566020 r hdplussat [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/20 13:45:14 566020 r hdplussat [mouse] Setting baudrate to 115200 bps
2014/09/20 13:45:14 566020 r hdplussat [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/20 13:45:14 566020 r hdplussat [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/09/20 13:45:14 566020 r hdplussat [mouse] Card responded ok for ifsd request of 28
2014/09/20 13:45:15 566020 r hdplussat [mouse] detect native nagra card
2014/09/20 13:45:16 566020 r hdplussat [mouse] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2014/09/20 13:45:16 566020 r hdplussat [mouse] found card system emu
2014/09/20 13:45:16 566020 r hdplussat [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/20 13:45:17 0 s init for all local cards done
2014/09/20 13:45:17 0 s anti cascading disabled
2014/09/20 13:53:53 5787C0 c encrypted cccam-client 217.246.90.145 granted (usxx, au=on (1 reader))
2014/09/20 13:54:11 0 --- Skipped 1 duplicated log lines ---
2014/09/20 13:54:11 56CB48 c usxx (1830/EF74/92): rejected group (1 ms) - SAT.1 HD (no matching reader)

als Karte wurde jetzt erkannt, nur bleiben die Programme dunkel.

hier mal die Oscam Server.

[reader]
label = S02
enable = 0
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1702,1833
boxkey = 1122334455667788
ecmwhitelist = 1702:93
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

[reader]
label = hdplussat
protocol = mouse
device = /dev/ttyUSB0
services = hdplus
smargopatch = 1
caid = 1830
rsakey = BF3xxxxx4DD5
boxkey = A76xxxxxx37C
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,3,2

[reader]
label = Emulator
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00

denke ist nur noch ne Einstellungssache.

Pilot · 20. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

Fehlermeldung: 2014/09/20 13:45:16 566020 r hdplussat [mouse] Negotiate sessionkey was not successful! Please check rsa key and boxkey

Das bedeutet: dein box keys und/ oder rsa keys haben Fehler drin.
Entweder:
- falsche keys
- oder Leerstell drin.
Wenn ja: Lererstellen entfernen und oscam neu starten.

jorgo · 20. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

Und setz mal bei device den hdplussat auf /dev/tty/USB1......

ricohs · 20. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

ok. danke

hab jetzt mal die Leerstellen raus gemacht, :emoticon-0157-sun: und der Resi ist hell. so jetzt werde ich noch die S02 mit Smargo dazu nehmen und hoffe das dann beide laufen. Werde mich dann wieder melden.

Danke schonmal

- - - - - - - - - -

dev/tty/USB1...... brauch ich doch nur bei 2 Reader wenn ich Smargo dazu nehme werde ich das natürlich ändern

jorgo · 20. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

jo... steht ja bei sky auf enable=0.
hab ich übersehen......

ricohs · 21. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

zu früh gefreut, hab jetzt beide karten am start und habe problemem

hier der log:

2014/09/21 00:53:18 0 s >> OSCam << cardserver started, version 1.20-emu, build r9848 (mips-linux-uclibc-libusb)
2014/09/21 00:53:18 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3614
2014/09/21 00:53:18 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/09/21 00:53:18 0 s userdb reloaded: 12 accounts loaded, 0 expired, 8 disabled
2014/09/21 00:53:18 0 s signal handling initialized
2014/09/21 00:53:18 0 s 171 service-id's loaded in 8 ms
2014/09/21 00:53:18 0 s 161 tier-id's loaded
2014/09/21 00:53:18 0 s 4 provid's loaded
2014/09/21 00:53:18 0 s cccam: initialized (fd=6, port=12000)
2014/09/21 00:53:18 0 s hdplussat [mouse] creating thread for device /dev/ttyUSB1
2014/09/21 00:53:18 0 s S02 [mouse] creating thread for device /dev/ttyUSB0
2014/09/21 00:53:18 0 s Emulator [emu] creating thread for device Emulator
2014/09/21 00:53:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/21 00:53:18 0 s waiting for local card init
2014/09/21 00:53:18 577048 h webif: decompressed 153722 bytes back into 361960 bytes
2014/09/21 00:53:18 577048 h HTTP Server running. ip=0.0.0.0 port=16000
2014/09/21 00:53:18 554490 r hdplussat [mouse] WARNING: Cant get readerstatus!
2014/09/21 00:53:18 57ACA8 r Emulator [emu] Reader initialized (device=Emulator, detect=cd, mhz=357, cardmhz=357)
2014/09/21 00:53:18 554490 r hdplussat [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=368, cardmhz=368)
2014/09/21 00:53:19 578E78 r S02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2014/09/21 00:53:19 554490 r hdplussat [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/21 00:53:19 554490 r hdplussat [mouse] Error getting card status.
2014/09/21 00:53:19 578E78 r S02 [mouse] card detected
2014/09/21 00:53:20 554490 r hdplussat [mouse] card detected
2014/09/21 00:53:23 578E78 r S02 [mouse] Error activating card.
2014/09/21 00:53:24 554490 r hdplussat [mouse] Error activating card.
2014/09/21 00:53:24 554490 r hdplussat [mouse] WARNING: Cant get readerstatus!
2014/09/21 00:53:25 578E78 r S02 [mouse] WARNING: Cant get readerstatus!
2014/09/21 00:53:26 578E78 r S02 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/21 00:53:26 578E78 r S02 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/21 00:53:26 578E78 r S02 [mouse] Setting baudrate to 187500 bps
2014/09/21 00:53:26 578E78 r S02 [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2014/09/21 00:53:26 578E78 r S02 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/09/21 00:53:27 578E78 r S02 [mouse] Warning: Card returned error on setting ifsd value to 251
2014/09/21 00:53:28 554490 r hdplussat [mouse] Error activating card.
2014/09/21 00:53:28 578E78 r S02 [mouse] detect native nagra card
2014/09/21 00:53:29 578E78 r S02 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/21 00:53:30 578E78 r S02 [mouse] T1 Resync command error, trying to reactivate!
2014/09/21 00:53:32 554490 r hdplussat [mouse] Error activating card.
2014/09/21 00:53:32 578E78 r S02 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/21 00:53:32 578E78 r S02 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255

und hier nochmal meine oscam server:

[reader]
label = hdplussat
protocol = mouse
device = /dev/ttyUSB1
services = hdplus
smargopatch = 1
caid = 1830
boxkey = A7**********7C
rsakey = BF********D5
detect = cd
mhz = 368
cardmhz = 368
ident =
group = 2
emmcache = 1,3,2

[reader]
label = S02
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1702,1833
boxkey = 1122334455667788
ecmwhitelist = 1702:93
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

hat jemand ne Idee?

spydd · 21. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

Kommentiere bei HD+ mal Services und smargopatch aus.
# davor und Neustart.
LG
spydd

kuhundkuh1 · 21. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

Hallo freetz-team, habe ein Problem (?) mit dem Client-image auf meiner fritzbox 7270-V2: nach der Installation zeigt er mir das an:
Eingehängte Partitionen [TABLE="class: mounted"]
[TR]
[TD="class: path"]/*data[/TD]
[TD="class: device"]/*dev/*mtdblock5[/TD]
[TD="class: fstype"]jffs2[/TD]
[TD="class: actions"]Mountoptionen:[/TD]
[/TR]
[TR]
[TD="class: free, colspan: 3"]452,0 kB von 768,0 kB belegt, 316,0 kB frei[/TD]
[TD="class: actions"][/TD]
[/TR]
[TR]
[TD="colspan: 4"][TABLE="class: bar rw"]
[TR]
[TD="class: part1"]59%[/TD]
[TD="class: part0"]41%[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
Sollte da nicht 1MB statt 768kb sein ? wie soll/ kann ich nun weiter installieren ? habe die ios. 6.05 und auch das passende client-image genommen.

Das habe ich unter oscam stehen:

StarttypVersion: NFR-OSCam Addon Version: 1.3.1
Automatisch Manuell

Startmodus (Intern uStor)

Hilfe intern modus
Hilfe usb modus

spydd · 21. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

Trunkimage installieren und dann nochmal das CI Image.
Anleitung zu Internmodus genau lesen.
LG
spydd

rolu2 · 21. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

Geh mal so vor wie in der Anleitung zum SI-3MB. Nur das du zum Schluss das CI flasht

Gesendet von meinem JY-G3 mit Tapatalk

prodb · 21. September 2014

AW: Laberthread : Neue Board-Image mit Oscam-1.3.1

Gismotro schrieb:
Liegen schon seit Tagen auf dem Teamserver :emoticon-0103-cool: . Aber aktuell nur als oRK.

Blöde frage: was heißt den oRK?

Ich kann wieder hier noch in google, was darüber finden.
Welche Nachteile hat ein oRK Image?
danke

Suche

Suche

Laberthread : Neue Board-Image mit Oscam-1.3.1

ricohs

Ist gelegentlich hier

rolu2

ricohs

Ist gelegentlich hier

rolu2

ricohs

Ist gelegentlich hier

Pilot

jorgo

Elite User

ricohs

Ist gelegentlich hier

jorgo

Elite User

ricohs

Ist gelegentlich hier

spydd

Freak

kuhundkuh1

Newbie

spydd

Freak

rolu2

prodb

Ist oft hier

Ähnliche Themen

Spenden Unterstützung