Kriege V14 im internen Slot nicht zum Laufen

bubbl · 17. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

Aktualisier mal auf die r1105
Damit sollte das Problem behoben sein:emoticon-0122-itwas

Ducktrick · 18. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

und um den externen Reader nutzen zu können musst du im TeamCS Menü -> die USBtoSerial Treiber Aktivieren und die Box rebooten, nur dann kannst du auch das usbtoserial device verwenden, was das oscam betrifft sollte es mit der oscam emu oder anderen eigentlich klappen mit der karte, wobei ich auch mal nen test Treiber im Board bei mir hochgeladen hatte der uns verrät womit die karte wirklich getakktet wird und dann kann man da was dran amchen, V14 war ja immer nen Problem

Pilot · 18. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

die modern Art 1105 habe ich im Netz nicht gefunden.
Aber die 9850 von hier:

Sie müssen registriert sein, um Links zu sehen.

auch die neue 9852 getestet: gleicher Fehler:
leider selber Fehler:

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.

2014/09/18 00:15:04 0 s 48 entries read from oscam.whitelist
2014/09/18 00:15:04 0 s monitor: initialized (fd=3, port=19006)
2014/09/18 00:15:04 0 s cs357x: initialized (fd=4, port=56700)
2014/09/18 00:15:04 0 s cs378x: initialized (fd=5, port=64000)
2014/09/18 00:15:04 0 s v14sat2 [internal] creating thread for device /dev/sci0
2014/09/18 00:15:04 5B8410 r v14sat2 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=2700, cardmhz=5)
2014/09/18 00:15:05 5B8410 r v14sat2 [internal] card detected
2014/09/18 00:15:05 0 s anti cascading disabled
2014/09/18 00:15:05 5BC280 c plain dvbapi-client granted (lokal, au=on (1 reader))
2014/09/18 00:15:05 58DC60 h webif: decompressed 154457 bytes back into 363760 bytes
2014/09/18 00:15:05 5BC280 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/09/18 00:15:06 5B8410 r v14sat2 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/18 00:15:06 5B8410 r v14sat2 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/09/18 00:15:06 5B8410 r v14sat2 [internal] Calculated work ETU is 3.44 us reader mhz = 2700
2014/09/18 00:15:06 5B8410 r v14sat2 [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/18 00:15:07 5B8410 r v14sat2 [internal] card system not supported
2014/09/18 00:15:07 5B8410 r v14sat2 [internal] Normal mode failed, reverting to Deprecated Mode
2014/09/18 00:15:08 5B8410 r v14sat2 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/18 00:15:08 5B8410 r v14sat2 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/09/18 00:15:08 5B8410 r v14sat2 [internal] Calculated work ETU is 13.78 us reader mhz = 2700
2014/09/18 00:15:08 5B8410 r v14sat2 [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/18 00:15:08 58DC60 h HTTP Server running. ip=0.0.0.0 port=83
2014/09/18 00:15:09 5BC280 c Found 0 ECMpids and 9 STREAMpids in PMT
2014/09/18 00:15:09 5BC280 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0001 index 0000 pmtpid 13EC
2014/09/18 00:15:09 5BC280 c New program number: 283D (Das Erste HD) [pmt_list_management 3]
2014/09/18 00:15:09 5B8410 r v14sat2 [internal] card system not supported
2014/09/18 00:15:09 5B8410 r v14sat2 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/18 00:15:09 5B8410 r v14sat2 [internal] card initializing error
2014/09/18 00:15:37 58DC60 h >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9850 (sh4-streamboard-linux-gnu-stapi)
2014/09/18 00:15:48 58DC60 h v14sat2 [internal] Restarting reader
2014/09/18 00:15:48 58DC60 h v14sat2 [internal] creating thread for device /dev/sci0
2014/09/18 00:15:48 5C48F8 r v14sat2 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=2700, cardmhz=5)
2014/09/18 00:15:48 5C48F8 r v14sat2 [internal] card detected
2014/09/18 00:15:49 5C48F8 r v14sat2 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/18 00:15:49 5C48F8 r v14sat2 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/09/18 00:15:49 5C48F8 r v14sat2 [internal] Calculated work ETU is 3.44 us reader mhz = 2700
2014/09/18 00:15:49 5C48F8 r v14sat2 [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/18 00:15:50 5C48F8 r v14sat2 [internal] card system not supported
2014/09/18 00:15:50 5C48F8 r v14sat2 [internal] Normal mode failed, reverting to Deprecated Mode
2014/09/18 00:15:51 5C48F8 r v14sat2 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/18 00:15:51 5C48F8 r v14sat2 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/09/18 00:15:51 5C48F8 r v14sat2 [internal] Calculated work ETU is 13.78 us reader mhz = 2700
2014/09/18 00:15:51 5C48F8 r v14sat2 [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/18 00:15:52 5C48F8 r v14sat2 [internal] card system not supported
2014/09/18 00:15:52 5C48F8 r v14sat2 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/18 00:15:52 5C48F8 r v14sat2 [internal] card initializing error

OSCAM Webinterface developed by Streamboard Team
Current Time: 18.09.14 | 00:16:21 Start Time: 18.09.14 | 00:15:03 Up Time: 00:01:18
Process ID: 1091 Access from: 192.168.178.44 Run as: root
OSCAM: 1.20-unstable_svn Build: r9850 Compiler: sh4-streamboard-linux-gnu-stapi
WebIf Style by

bubbl · 18. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

Du hast die Modern , und die must dir per Simplebuild von Gorgone kompilieren
Zurück zu deinem Problem

Mach mal folgendes:
- karte raus
-oscam killen
- oscam starten
- warten bis oscam zu sich gekommen ist
- karte rein

Pilot · 19. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

leider kein Erfolg damit.

Hab jetzt diese oscam Versin im hdfreaksboard gefunden: Version: oscam-1.20-modern-r1105
Bekomme ein cardok.
CARDOK

Sie müssen registriert sein, um Links zu sehen.

Aber mit Entis wie von einem Emu reader:

Entitlements for v14sat2

[TABLE="class: stats"]
[TR]
[TH="colspan: 3"]Cardsystem[/TH]
[TH="colspan: 2"]Valid To[/TH]
[TH]IRD ID (nagra)[/TH]
[TH="colspan: 2"]Provider[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 3"]emu[/TD]
[TD="colspan: 2"]n/a[/TD]
[TD]FF FF FF FF[/TD]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Serial[/TH]
[TH="colspan: 2"]Rom[/TH]
[TH="colspan: 4"]ATR[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 2"]00 00 00 00[/TD]
[TD="colspan: 2"][/TD]
[TD="colspan: 4"]3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03[/TD]
[/TR]
[TR]
[TH]Type[/TH]
[TH]Caid[/TH]
[TH]Provid[/TH]
[TH]ID[/TH]
[TH]Class[/TH]
[TH]Start Date[/TH]
[TH]Expire Date[/TH]
[TH]Name[/TH]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D00[/TD]
[TD]000020[/TD]
[TD]00[/TD]
[TD]A40403143ECB6220DA180E54851451EF[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D00[/TD]
[TD]000020[/TD]
[TD]06[/TD]
[TD]239091781C7E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D00[/TD]
[TD]000030[/TD]
[TD]00[/TD]
[TD]BDD3A8E93764FFDB1D3866CF974A4077[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D00[/TD]
[TD]000030[/TD]
[TD]06[/TD]
[TD]239091781C7E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D05[/TD]
[TD]000004[/TD]
[TD]00[/TD]
[TD]A9D732F5E738E48A91C8638B12746661[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D05[/TD]
[TD]000004[/TD]
[TD]06[/TD]
[TD]0987CF2A611D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D05[/TD]
[TD]000010[/TD]
[TD]00[/TD]
[TD]00006AB325E6ABF4DA47280F35294B5C[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D05[/TD]
[TD]000010[/TD]
[TD]01[/TD]
[TD]0000000000000000307E4DAC065BA686[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D05[/TD]
[TD]000010[/TD]
[TD]06[/TD]
[TD]0987CF2A611D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D03[/TD]
[TD]000004[/TD]
[TD]06[/TD]
[TD]27B488348D54[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D03[/TD]
[TD]000004[/TD]
[TD]00[/TD]
[TD]000000000000000019E8F524C6C053E4[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D03[/TD]
[TD]000008[/TD]
[TD]06[/TD]
[TD]27B488348D54[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D03[/TD]
[TD]000008[/TD]
[TD]01[/TD]
[TD]000000000000000042F07BE920C7E0F3[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]007400[/TD]
[TD]08[/TD]
[TD]2FB60239D4D8C4D6[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]023800[/TD]
[TD]D1[/TD]
[TD]0B552C11AF0A2FB8[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]023800[/TD]
[TD]X1[/TD]
[TD]3D1229C2ED29C130[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]023800[/TD]
[TD]P1[/TD]
[TD]0304000207050106[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]023800[/TD]
[TD]C1[/TD]
[TD]DA4E0B42134F433B[/TD]
[/TR]
[/TABLE]
[TABLE="class: stats"]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]023800[/TD]
[TD]T1[/TD]
[TD]495EE3839DD6544AF23FC1EC7C684D973CF873926F1CF0F586DA31A1156B[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]T1[/TD]
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
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]D1[/TD]
[TD]89CBB54EEB94E350[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]X1[/TD]
[TD]8B2908AE39B0101A[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]P1[/TD]
[TD]0704020305000601[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]C1[/TD]
[TD]FC3C5F15D7A0B437[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]E0[/TD]
[TD]439726EBB6A939A456C05FF6AA606C43[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]E1[/TD]
[TD]A79AC0DBEC9C9251D1915F058862AF26[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]EC[/TD]
[TD]9A3EAB0203EBFFCA85B4F18280749F56[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]ED[/TD]
[TD]2504B382B16D8C6758DB960E311E9351[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]EE[/TD]
[TD]349883E54D58336DCA750A878ACC5CD5[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]E14[/TD]
[TD]6B1B024D36F60974973CB81FA5E8F01C[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]E15[/TD]
[TD]127003F8E95100367A556121C779FB6E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]E2[/TD]
[TD]EF3CB8D36A862097A33FC47101041BE3[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]08[/TD]
[TD]D92A82E3111C9AFDED4626AD0B542E5B[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]09[/TD]
[TD]CC72AAFE5265D6D04608E832CEB9EC4D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]0A[/TD]
[TD]EE2679604A7DDD32E4F8CB913500D38E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]0B[/TD]
[TD]7C6A2428C020023B163E4FE024FF5D9D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]T1[/TD]
[TD]D6B456127B1032D86067DF48284A9C6C05E4036DBC33D48E53654BAA6A57C263C0434F5E69F434B80C6FE57C58CF9697C86E0615263CBB7F9D81945535E6B9865BD5E02168D7B0A80BBD0D1AC680CA2290A5AE18893B021D2CC18540778A2361085F751F8219B30944241CBA0F133129E38FD1DEF062F25C93EBEC042B83D9374D39647D8D5A3FD3F8545DDDF784177150DC9E783AEA2E2FE8CBE9B10E3892E2BFC5BEE7B251DAB647D21BFDEEC952FB469BA46601E1A7CE273E6B361449A2A020591EEFFEA14CDB30AD4E99FFEDB72DFC72A98716410045077EA6C7918B730A42B59F70112A3DA3989A95797ACDACC374F676F525F3F18C88FAF9AFD0ABC4CC[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]D1[/TD]
[TD]536D1D0DC041D468[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]X1[/TD]
[TD]8DE3666B8CB0B00B[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]P1[/TD]
[TD]0106000203050407[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]C1[/TD]
[TD]1332DB1E6775561E[/TD]
[/TR]
[/TABLE]
[TABLE="class: stats"]
[TR="class: e_valid"]
[TD]ey[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]08[/TD]
[TD]DFB61C951AE2C57BDE0D4887B9614295[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]09[/TD]
[TD]6585A93F605B570F2D2C2FC1926BAB65[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]0C[/TD]
[TD]A1EE84B9498D875B68AD6C98B425C50D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]003A01[/TD]
[TD]00[/TD]
[TD]6FCAEDFBBE4A97BB[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]003A01[/TD]
[TD]01[/TD]
[TD]CFFCAE4981431683[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]003B01[/TD]
[TD]00[/TD]
[TD]6FCAEDFBBE4A97BB[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]003B01[/TD]
[TD]01[/TD]
[TD]CFFCAE4981431683[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]007301[/TD]
[TD]M1[/TD]
[TD]7544E982065D53E7CF049AF2E725544A50268DA1462F15D8A197ECE4B80FE221122F92AD56324380A04878EBF563427DD85C38645907583E23AC5153E300CF84[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]007301[/TD]
[TD]00[/TD]
[TD]79E8FDEB4EAB120892F68D6319993283[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]007301[/TD]
[TD]01[/TD]
[TD]67268A474ED5A53867A2813A639D0F6A[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]001101[/TD]
[TD]M1[/TD]
[TD]C75C2FECF494F6DD71BBF898C63F7FEBA11345DF14C71EE656BC23016C2F90A881429B82A68C095E472C997752D5890341CF9E06691672482718750B918AAE92[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]001101[/TD]
[TD]00[/TD]
[TD]9AF11CE0871C97911FFF4099851B867D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]001101[/TD]
[TD]01[/TD]
[TD]FAD9E99827B3D66B624FA382E52615E1[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]00C102[/TD]
[TD]M1[/TD]
[TD]3122D1C22907B398DC253FEA29D03385971FD3DFBBD5235A531959E94C86637847DDE58E6E8997A411D7031F8AA0CB0A3EBB7C420E043B31F6EADA31100C2AA0[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]00C102[/TD]
[TD]00[/TD]
[TD]5BCE65625FA4ED509594CE7C4B907ECB[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]00C102[/TD]
[TD]01[/TD]
[TD]D7CBE93D30E2C9139107387457DB9023[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]004B11[/TD]
[TD]M1[/TD]
[TD]3D4737225FFC0A5727425FFA34122F04022F02053544532502D52454C5F312E312E330020222F262E0220222F28240C60BB7776262599A444B522F07824A8783[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]004B11[/TD]
[TD]00[/TD]
[TD]E91C4FB7A66BF0AD478B0A1C45BDDFB4[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]004B11[/TD]
[TD]01[/TD]
[TD]2266AF30B15420796AB3BB6717625902[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0604[/TD]
[TD]000000[/TD]
[TD]M1[/TD]
[TD]98B4DCAD44E8C9504C3F4E51692A7047[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0604[/TD]
[TD]000000[/TD]
[TD]M2[/TD]
[TD]AE652B210BF89FC69507609842FD303E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0604[/TD]
[TD]000000[/TD]
[TD]02[/TD]
[TD]DFDD0C4B92B4ABD26514B9AF9F0C79C4[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0604[/TD]
[TD]000000[/TD]
[TD]04[/TD]
[TD]731BB81185609CFA22F8B039C253E3BD[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0604[/TD]
[TD]000000[/TD]
[TD]06[/TD]
[TD]DB88B668A980CDBBCD8B06CE49A0BA6B[/TD]
[/TR]
[/TABLE]

reader

[reader]
label = v14sat
enable = 0
protocol = mouse
device = /dev/ttyUSB0
services = skybuli,skysporthd,eurosport_360_hd,skysport,skyextra,skyfilm,skywelt,skyhd,skyselect,hdplus,bluemovie
lb_whitelist_services = skybuli,skysporthd,eurosport_360_hd,skysport,skyextra,skyfilm,skywelt,skyhd,skyselect,hdplus,bluemovie
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 1
cardmhz = 2700
group = 9
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Hab einen neuen USB Hub bestellt, um extern weiterzukommen.
Hab meinen USB Hub in Verdacht im A. zu sein

joopastron · 19. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

Hi

ins7e11 bitte auf 13 abändern und intern noch einmal testen.

Sent from my iPhone using Tapatalk

Pilot · 19. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

Hab es so gesetzt.
Da bekomme ich ein needinit.
Bleibt auch da stehen.
Lass jetzt den Reciver neu booten....

joopastron · 19. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

Da poste mal bitte den Log

Sent from my iPhone using Tapatalk

Pilot · 19. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

das steht im log

2014/09/19 19:21:00 513A28 h >> OSCam << cardserver log switched, version 1.20-modern, build r1105 (sh4-streamboard-linux-gnu-libusb)
2014/09/19 19:21:12 513A28 h WARNING lock system_lock (WRITELOCK) timed out.
2014/09/19 19:21:18 513A28 h WARNING lock http_lock (WRITELOCK) timed out.
2014/09/19 19:21:23 0 --- Skipped 2 duplicated log lines ---
2014/09/19 19:21:23 513A28 h WARNING lock system_lock (WRITELOCK) timed out.
2014/09/19 19:21:23 513A28 h WARNING lock http_lock (WRITELOCK) timed out.

Das steht im livelog

2014/09/19 19:21:39 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1906
2014/09/19 19:21:39 0 s services reloaded: 0 services freed, 22 services loaded, rejected 0
2014/09/19 19:21:39 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/19 19:21:39 0 s signal handling initialized
2014/09/19 19:21:39 0 s 485 service-id's loaded in 63 ms
2014/09/19 19:21:39 0 s 55 tier-id's loaded
2014/09/19 19:21:39 0 s 13 provid's loaded
2014/09/19 19:21:39 0 s 48 entries read from oscam.whitelist
2014/09/19 19:21:39 0 s monitor: initialized (fd=3, port=19006)
2014/09/19 19:21:39 0 s cs357x: initialized (fd=4, port=56700)
2014/09/19 19:21:39 0 s cs378x: initialized (fd=5, port=64000)
2014/09/19 19:21:39 0 s v14sat2 [internal] creating thread for device /dev/sci0
2014/09/19 19:21:39 513A18 r v14sat2 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2014/09/19 19:21:39 513A18 r v14sat2 [internal] card detected
2014/09/19 19:21:39 4EEB08 h webif: decompressed 112007 bytes back into 280176 bytes
2014/09/19 19:21:39 516F20 c plain dvbapi-client granted (lokal, au=on (1 reader))
2014/09/19 19:21:39 516F20 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/09/19 19:21:40 513A18 r v14sat2 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/19 19:21:40 513A18 r v14sat2 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/09/19 19:21:40 513A18 r v14sat2 [internal] TEST tempo mhz check = 1 mhz
2014/09/19 19:21:40 513A18 r v14sat2 [internal] Calculated work ETU is 9300.00 us reader mhz = 1
2014/09/19 19:21:40 4EEB08 h HTTP Server running. ip=0.0.0.0 port=83
2014/09/19 19:21:40 516F20 c Found 0 ECMpids and 9 STREAMpids in PMT
2014/09/19 19:21:40 516F20 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0001 index 0000 pmtpid 13EC
2014/09/19 19:21:40 516F20 c New program number: 283D (Das Erste HD) [pmt_list_management 3]
2014/09/19 19:21:40 513A18 r v14sat2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 0.01 Mhz (nearest possible mhz specified reader->cardmhz)

Ducktrick · 20. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

schallte das auto detect der mhz wieder aus indem du die mhz wieder einträgst. dann verwende bitte den smartcard treiber aus meinen board da es so scheint das die karte nur nicht richtig getaktet wird. dann poste bitte nen oscam log und auch ne dmesg ausgabe

Pilot · 20. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

Treiber ausgetauscht. Hoffe das ich es richtig gemacht hab.
Hier der dmesg:

Normal zone: 0 pages reserved
Normal zone: 32512 pages, LIFO batch:7
Edision Argus Reference board initialisation
STx7109 version 3.x
Chip version 3.4
Setting version to 4.0 to match commercial branding
bpa2: partition 'LMI_VID' created at 0x10800000, size 90112 kB (0x05800000 B)
bpa2: partition 'LMI_SYS' created at 0x0462b000, size 15360 kB (0x00f00000 B)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: console=ttyAS0,115200 root=/dev/sda1 rw mem=128m bigpysarea
=4000 coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:00
:80:E1:12:06:30 init=/bin/devinit printk
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
PVR=04061100 CVR=30480000 PRR=00009300
I-cache : n_ways=2 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Memory: 109140k/131072k available (2701k kernel code, 807k data, 1616k init)
Hierarchical RCU implementation.
NR_IRQS:600
console [ttyAS0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop... 264.19 BogoMIPS (lpj=528384)
Mount-cache hash table entries: 512
CPU: STx7109
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
Generic PHY: Registered new driver (0xffffffff)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
NET: Registered protocol family 8
NET: Registered protocol family 20
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
sq: Registering store queue API.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 213
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
lirc_dev: IR Remote Control driver registered, major 61
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0x18032000 (irq = 121) is a stm-asc
stm-asc.1: ttyAS1 at MMIO 0x18033000 (irq = 120) is a stm-asc
loop: module loaded
sata-stm version 0.8
sata-stm using hardware scatter/gather
sata-stm SATA version 1.00 DMA version 2.02
MiPHY driver style MiPHY-DUMMY probed successfully
MiPHY-DUMMY, c0.0 Claimed by sata-stm
scsi0 : sata-stm
ata1: SATA max UDMA/133 irq 170
physmap platform flash device: 00800000 at 00000000
physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
Searching for RedBoot partition table in physmap-flash at offset 0x7f0000
No RedBoot partition table detected in physmap-flash
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash":
0x000000000000-0x000000040000 : "Boot (RO)"
0x000000040000-0x0000006a0000 : "jffs2 (RW)"
0x000000700000-0x000000800000 : "NAND-END (RO)"
0x000000000000-0x000000800000 : "Kompletter Nand Flash (RW) - Loeschen ohne neue
Firmware - JTAG noetig"
slram: not enough parameters.
STe100p: Registered new driver (0x1c040011)
STe101p: Registered new driver (0x00061c50)
DWMAC100
No HW DMA feature register supported
Normal descriptors
nwhw_config: (eth0) setting mac address: 00:80:e1:12:06:30
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm_usb_probe: usb_48_clk clock not found for stm-usb.0
stm_usb_probe: usb_phy_clk clock not found for stm-usb.0
ata1: SATA link down (SStatus 0 SControl 0)
stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0x191ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0x191ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i2c /dev entries driver
i2c_st40_pio: ST40 PIO based I2C Driver for STM24
Linux video capture interface: v2.00
usbcore: registered new interface driver ushc
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
STMicroelectronics - Coprocessors st231 Init
st231.0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0000000 size 0x00400000
cop. addr 0x10000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231.1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0400000 size 0x00400000
cop. addr 0x10400000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
DMA: Registering fdma_dmac handler (16 channels).
IRQ 140/fdma_dmac: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma: firmware: using built-in firmware fdma_STx7109_0.elf
platform fdma_dmac: SLIM hw 0.0, FDMA fw 4.6
Advanced Linux Sound Architecture Driver Version 1.0.21.
ALSA device list:
#0: STMicroelectronics STx7109 cut 4.0 SOC audio subsystem
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
usb 1-1: new high speed USB device using stm-ehci and address 2
Freeing unused kernel memory: 1616k freed
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 5 ports detected
Fulan front panel driver
YWPANEL_VFD_DETECT: Frontcontroller I2C: 02:28 @2652
YWPANEL_VFD_DETECT: result=1, vfd_type=2
VfdType = 2
YWPANEL_VFD_Init: YWPANEL_VFD_Initialize(): 0 @2829
CpuType = -2077631140
DisplayInfo = 0
scankeyNum = 160
swMajorVersion = 8
swSubVersion = 193
usb 1-1.1: new high speed USB device using stm-ehci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.4: new high speed USB device using stm-ehci and address 4
usb 1-1.4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: wait 0 seconds on usb port 1.4
scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 2.01 PQ: 0 ANSI: 6
sd 1:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
usb-storage: device scan complete
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI disk
input: fulan front panel buttons as /devices/virtual/input/input0
usb 1-1.5: new high speed USB device using stm-ehci and address 5
usb 1-1.5: configuration #1 chosen from 1 choice
hub 1-1.5:1.0: USB hub found
hub 1-1.5:1.0: 5 ports detected
usb 1-1.5.1: new high speed USB device using stm-ehci and address 6
usb 1-1.5.1: configuration #1 chosen from 1 choice
usb 1-1.5.2: new full speed USB device using stm-ehci and address 7
usb 1-1.5.2: configuration #1 chosen from 1 choice
aotom_vip1: exports duplicate symbol I2C_bus_add (owned by aotom)
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
fsck.ext2: sending ioctl 127c to a partition!
fsck.ext2: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
EXT2-fs: sda2: couldn't mount because of unsupported optional features (244).
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode
Slow work thread pool: Starting up
Slow work thread pool: Ready
EXT2-fs: sda4: couldn't mount because of unsupported optional features (244).
EXT4-fs (sda4): recovery complete
EXT4-fs (sda4): mounted filesystem with ordered data mode
stmcore-display: STx7109c3 display: probed
device probe found 2 display pipelines
stmfb: Starting HDMI Output hdmi = 8adc0000
[DETECT] -> Boxdetect for Argus Boxes
[DETECT] -> Boxtype = Vip2
[DETECT] -> Tuner1 = sharp7306
[DETECT] -> Tuner2 = lg031
[AVS]: A/V switch handling for vip2_avs
[AVS]: init success
[AVS]: Set Encoder = (1)ON
snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw
pti: module license 'NO' taints kernel.
Disabling lock debugging due to kernel taint
pti loaded (videoMem = 2048, waitMS = 20, camRouting = 0, enableStatistic = 0)
DVB: registering new adapter (STM Streamer)
Load real TC Code
TC_Data = b9238000, TC_Code = b923c000
Readback TC ... successfull
using videoMem = 385024 (packets = 2048)
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(0) base = 525b000, top = 52b9000, buffer = 525b000, size 385024
freeBuffer(): free = 1
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(1) base = 5400000, top = 545e000, buffer = 5400000, size 385024
freeBuffer(): free = 2
pti_task: using 2 dma channel
DVB: registering adapter 0 frontend 0 (Sharp7306 Plug&Play (VIP2) )...
DVB: registering adapter 0 frontend 1 (Philips TDA10023 DVB-C)...
Free session: 0
Using session 0
Free session: 1
Using session 1
Free session: 2
Using session 2
input: TDT RC event driver as /devices/virtual/input/input1
lirc_dev: lirc_register_driver: sample_rate: 0
[AVS]: avs_command_kernel (10)
[AVS]: vip2_avs_command_kernel: SAA command (10)
[AVS]: vip2_avs_command_kernel SAAIOSMODE set wss
[AVS]: vip2_avs_set_wss
[AVS]: avs_set_wss SAA_WSS_169F = (1)
Adding 69184k swap on /dev/sda3. Priority:-1 extents:1 across:69184k
eth0: device MAC address 00:80:e1:12:06:30
STMMAC MII Bus: probed
eth0: PHY ID 0181b8a0 at 2 IRQ 11 (0:02) active
stmmac_timer: (eth0) sh_tmu Timer (freq 256Hz)
No MAC Management Counters available
PHY: 0:02 - Link is Up - 100/Full
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
[AVS]: avs_command_kernel (5)
[AVS]: vip2_avs_command_kernel: SAA command (5)
[AVS]: vip2_avs_command_kernel SAAIOSMODE set mode
[AVS]: vip2_avs_set_mode RGB 1
[AVS]: avs_command_kernel (11)
[AVS]: vip2_avs_command_kernel: SAA command (11)
[AVS]: vip2_avs_command_kernel SAAIOSMODE src sel
[AVS]: Not Supported (vip2_avs_src_sel)
[AVS]: avs_command_kernel (4103)
[AVS]: vip2_avs_command_kernel: AVSIOSET command
[AVS]: vip2_avs_command_kernel AVSIOSVOL set volume
[AVS]: vip2_avs_set_volume (0)
[AVS]: vip2_avs_set_volume: c = (62)
stmhdmiio_set_audio_source - 8adc0000
stmfb: Starting HDMI Output hdmi = 8adc0000
stmfb: Starting HDMI Output hdmi = 8adc0000
[AVS]: avs_command_kernel (4104)
[AVS]: vip2_avs_command_kernel: AVSIOSET command
[AVS]: vip2_avs_command_kernel AVSIOSVOL set mute
[AVS]: type Mute 0 (SCART_AUDHI=0 Kackt beim Zappen)
[AVS]: vip2_avs_set_mute: t_mute = (0)
[AVS]: Hier Knackt es wenn SCART_AUDHI auf 0 gestellt wird f r lauteren Sound..
.pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8b0722e8
(da 0, 1)(da 0, 2)(da 0, 3)(da 0, 3)[AVS]: avs_command_kernel (10)
[AVS]: vip2_avs_command_kernel: SAA command (10)
[AVS]: vip2_avs_command_kernel SAAIOSMODE set wss
[AVS]: vip2_avs_set_wss
[AVS]: avs_set_wss SAA_WSS_169F = (1)
ArgusVIP:~#

Ducktrick · 20. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

ist oscam an und was sagt die karte

tom_63 · 20. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

ich würde mal den MHz-Wert korrekt setzen. 2700 ist Unsinn und nur für Dreamboxen geeignet. Da du eine SH4-Prozessorarchitektur hast, ist es zumindest mal keine Dreambox.
Somit kommt "MHz = 500" für 5 MHz in Frage.

Gruß
TOM

Pilot · 20. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

Ducktrick schrieb:
ist oscam an und was sagt die karte

Oscam läuft:

Sie müssen registriert sein, um Links zu sehen.
Link ist nicht mehr aktiv.
Sie müssen registriert sein, um Links zu sehen.

Karte:
[TABLE="class: status"]
[TR="class: r"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol4"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol5 statuscol5ON"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol15"]00:06:24
00:06:24[/TD]
[TD="class: statuscol16 statuscol16CARDOK"]CARDOK

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[/TABLE]

Log:

-------------------------------------------------------------------------------
2014/09/20 14:09:17 526710 h >> OSCam << cardserver log switched, version 1.20-EMU-HDSC build #60-9053 (sh4-linux)
2014/09/20 14:09:22 526710 h Restart requested by WebIF from 192.168.178.44
2014/09/20 14:09:22 526710 h restart oscam requested
2014/09/20 14:09:22 0 s init for all local cards done
2014/09/20 14:09:22 0 s anti cascading disabled
2014/09/20 14:09:22 567B10 c plain dvbapi-client granted (lokal, au=on (1 reader))
2014/09/20 14:09:22 567B10 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/09/20 14:09:22 526710 h HTTP Server stopped
2014/09/20 14:09:22 0 s loadbalancer: statistic saved 19 records to /var/keys/lb in 21ms
2014/09/20 14:09:22 0 s stats saved to file /var/keys/lb
2014/09/20 14:09:22 0 s killing client lokal
2014/09/20 14:09:22 0 s v14sat2 [mouse] Killing reader
2014/09/20 14:09:22 0 s cccam_server1 [cccam] Killing reader
2014/09/20 14:09:22 0 s userdb 1 accounts freed
2014/09/20 14:09:22 0 s readerdb 6 readers freed
2014/09/20 14:09:22 0 s cardserver down

livelog

2014/09/20 23:12:04 511478 h skyde [emu] Restarting reader
2014/09/20 23:12:04 511478 h skyde [emu] creating thread for device /dev/sci1
2014/09/20 23:12:04 29A24BD0 r skyde [emu] Reader initialized (device=/dev/sci1, detect=cd, mhz=375, cardmhz=375)
2014/09/20 23:12:05 29A24BD0 r skyde [emu] card detected
2014/09/20 23:12:05 29A24BD0 r skyde [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/20 23:12:05 29A24BD0 r skyde [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/09/20 23:12:05 29A24BD0 r skyde [internal] Calculated work ETU is 24.80 us reader mhz = 375
2014/09/20 23:12:06 29A24BD0 r skyde [internal] ATR Fsmax is 5 MHz, clocking card to 3.75 (specified in reader->mhz)
2014/09/20 23:12:09 29A24BD0 r skyde [internal] found card system emu
2014/09/20 23:12:09 29A24BD0 r skyde [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

readerconfig

[reader]
label = skyde
protocol = internal
device = /dev/sci1
autospeed = 0
detect = cd
mhz = 375
cardmhz = 375
group = 2
emmcache = 1,1,2

Ducktrick · 21. September 2014

AW: Kriege V14 im internen Slot nicht zum Laufen

na das sieht doch so aus als würde da alles ok sein

Code:

[LIST]
[*]2014/09/20 23:12:05 29A24BD0 r skyde [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03 
[*]2014/09/20 23:12:05 29A24BD0 r skyde [internal] Init card protocol T0, FI=1, F=372, D=4, N=2 
[*]2014/09/20 23:12:05 29A24BD0 r skyde [internal] Calculated work ETU is 24.80 us reader mhz = 375 
[*]2014/09/20 23:12:06 29A24BD0 r skyde [internal] ATR Fsmax is 5 MHz, clocking card to 3.75 (specified in reader->mhz) 
[*]2014/09/20 23:12:09 29A24BD0 r skyde [internal] found card system emu 
[*]2014/09/20 23:12:09 29A24BD0 r skyde [emu] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1 
[/LIST]

steht doch auch CARDOK, wo liegt denn nun das Problem ?

Und @Tom
das mit den 2700 funktioniert mit den neueren oscam bei s02 und hd+ Weiss Problemlos nur die V14 und V13 spacken damit rum

Suche

Suche

Kriege V14 im internen Slot nicht zum Laufen

bubbl

DEB König

Ducktrick

Super Elite User

Pilot

bubbl

DEB König

Pilot

joopastron

Pilot

joopastron

Pilot

Ducktrick

Super Elite User

Pilot

Ducktrick

Super Elite User

tom_63

Meister

Pilot

Ducktrick

Super Elite User

Ähnliche Themen

Spenden Unterstützung