Komme mit den MHZ und Log Einstellungen nicht klar

renerocker · 22. März 2015

Ich benutze einen Spark One dvb-c mit oscam 10615. Ich hatte gestern schon das Problem, für meine p02 Karte die richtigen mhz Einstellungen zu finden. Funtioniert hat es dann mit 500 mhz und 2700 cardmhz.

Jetzt habe ich das gleiche Problem mit der v14:

Log:

2015/03/22 20:26:27 50BD40 r (reader) Intern_Upper_V14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/03/22 20:26:29 50BD40 r (reader) Intern_Upper_V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/03/22 20:26:29 50BD40 r (reader) Intern_Upper_V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/03/22 20:26:29 50BD40 r (reader) Intern_Upper_V14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/03/22 20:26:29 50BD40 r (reader) Intern_Upper_V14 [internal] Buffers readed 0 bytes total time_us 79369
2015/03/22 20:26:31 50BD40 r (reader) Intern_Upper_V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/03/22 20:26:34 50BD40 r (reader) Intern_Upper_V14 [internal] card system not supported
2015/03/22 20:26:34 50BD40 r (reader) Intern_Upper_V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/03/22 20:26:34 50BD40 r (reader) Intern_Upper_V14 [internal] card initializing error
2015/03/22 20:26:35 0 s (main) init for all local cards done
2015/03/22 20:26:35 0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/03/22 20:26:35 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/03/22 20:26:35 0 s (anticasc) anti cascading disabled
2015/03/22 20:26:35 50F198 c (client) plain dvbapi-client granted (dvbapi, au=auto (1 reader))
2015/03/22 20:26:35 50F198 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam.ccache
2015/03/22 20:26:35 50F198 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2015/03/22 20:26:38 50F198 c (dvbapi) Demuxer 0 impossible to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/03/22 20:26:39 50F198 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/03/22 20:26:39 50F198 c (dvbapi) Demuxer 0 impossible to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/03/22 20:26:39 50F198 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/03/22 20:26:39 50F198 c (dvbapi) Demuxer 0 impossible to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/03/22 20:26:39 50F198 c (dvbapi) Demuxer 0 impossible to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/03/22 20:26:40 50F198 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/03/22 20:26:40 50F198 c (dvbapi) Demuxer 0 impossible to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/03/22 20:26:40 50F198 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/03/22 20:26:40 50F198 c (dvbapi) Demuxer 0 impossible to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/03/22 20:26:40 50F198 c (dvbapi) Demuxer 0 impossible to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)

Hier meine Aktuellen OSCam Konfigurationsdateien

oscam.conf

Code:

##################   General Instruction  -  oscam.conf ####################
#                                                                          #
#              per default no changes from the user are needed             #
#               but verify the IP-range oh your local Network              #
#                                                                          #
############################################################################
[global]
nice                          = -10
disablelog                    = 1
loghistorysize                = 200
logfile                       = /usr/keys/oscam.log
usrfile                       = /usr/keys/oscamuserfile






[monitor]
nocrypt                       = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo                = 1


[webif]
httpport                      = 8888
httpuser                      = root
httppwd                       = oscam
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255


[dvbapi]
enabled             = 1
au                  = 1
decodeforever                 = 1
boxtype             = duckbox
user                = dvbapi


pmt_mode         = 0

oscam.user

Code:

##################   General Instruction  -  oscam.user ####################
#                                                                          #
#              per default no changes from the user are needed             #
#                                                                          #
############################################################################
[account]
user = dvbapi
pwd = dvbapi
group  = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702,1834.FFFF:1722


########  end of file ########

oscam.server

Code:

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10615
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt


[reader]
label                         = Intern_Upper_V14
description                   = Set as Sky V14
protocol                      = internal
device                        = /dev/sci0
caid                          = 098C
ins7e11                       = 15
detect                        = cd
mhz                           = 1
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,1,2,0
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-unknown               = 1
saveemm-u                     = 1
saveemm-s                     = 1
saveemm-g                     = 1
ndsversion                    = 2

oscam.srvid

Code:

oscam.dcbapi

Code:

P: 098C 1
I: 0














[SIZE=-3][B][I]Generiert mit Shamrock's OSCAM Confi Forum Helper am 22.03.2015 um 20:23:46 Uhr [/I][/B][/SIZE]
[/SPOILER]

Er schreibt mir auch kein Log mehr in den Ordner, da habe ich also auch irgendwas vermurkst.

Kann da wer helfen?

Shamrock · 22. März 2015

AW: Komme mit den MHZ und Log Einstellungen nicht klar

Ja weil dein log sicher schon überläuft.

Lösch mal das alles raus

Saveemm-unknown = 1
saveemm-g = 1
saveemm-s = 1

Bei meiner V14 in Dreambox intern hab ich die mhz

mhz = 450
cardmhz = 2700

Mfg Shamrock

Ein klick auf "Danke" unten links tut nicht weh ;-)

dodo83 · 22. März 2015

AW: Komme mit den MHZ und Log Einstellungen nicht klar

hi,
bei Sh4 Receivern würde ich die Standard CARDMHZ setzen, 600 für die P02/S02
die 2700 gelten eigentlich für MIPS Boxen

renerocker · 24. März 2015

AW: Komme mit den MHZ und Log Einstellungen nicht klar

Also die P02 Karte hat bei dieser oscam Version mit mhz 500 und cardmhz 2700 funktioniert. Aber jetzt benutze ich ja eine v14. Welche Werte sind denn da Standard?

Die mhz 450 cardmhz 2700 funktionieren nicht.

Mit den vorgegebenen Einstellungen sieht es so aus:
Hier meine Aktuellen OSCam Konfigurationsdateien

oscam.conf

Code:

##################   General Instruction  -  oscam.conf ####################
#                                                                          #
#              per default no changes from the user are needed             #
#               but verify the IP-range oh your local Network              #
#                                                                          #
############################################################################
[global]
nice                          = -10
disablelog                    = 1
loghistorysize                = 200
logfile                       = /usr/keys/oscam.log
usrfile                       = /usr/keys/oscamuserfile



[monitor]
nocrypt                       = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo                = 1

[webif]
httpport                      = 8888
httpuser                      = root
httppwd                       = oscam
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled             = 1
au                  = 1
decodeforever                 = 1
boxtype             = dreambox
user                = dvbapi

pmt_mode         = 0

oscam.user

Code:

##################   General Instruction  -  oscam.user ####################
#                                                                          #
#              per default no changes from the user are needed             #
#                                                                          #
############################################################################
[account]
user = dvbapi
pwd = dvbapi
group  = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702,1834.FFFF:1722

########  end of file ########

oscam.server

Code:

###############   General Instruction  -  oscam.server   ###################
# To activate/deactivate the reader set enable = 1/0                       #
#                                                                          #
# You might specify further entries in each reader section                 #
# such as "caid =________" and/or "services = _________"  but you needn´t  #
# For further details see the OSCAM documentation                          #
############################################################################


######################### Internal Readers   ###############################
# Default Config should work with Seca, Conax, Cryptoworks, Viaccess, NDS  #
#                                                                          #
# For Irdeto, Betacrypt just activate "cardmhz=600" by removing the "#"    #
#                                                                          #
# For Nagra activate and set the correct "rsakey = " and "boxkey = " en    #
# examples for HDplus HD02 and Sky S02 are included                                           #
#                                                                          #
# for specific Smartcards such as TIGER or Viaccess with AES-Key           #
# see the OSCAM documentation                                              #
############################################################################

[reader]
enable                        = 0
description                   = Set as Sky V14
label                         = Intern_Upper_V14
protocol                      = internal
device                        = /dev/sci0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
detect                        = CD
# card not init. use other mhz 343,357,480,500 or 686....
mhz                           = 343
cardmhz                       = 357
group                         = 1
emmcache                      = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

oscam.srvid

Code:

oscam.dcbapi

Code:

P: 098C
I: 0

[SIZE=-3]Generiert mit Shamrock's OSCAM Confi Forum Helper am 24.03.2015 um 20:18:58 Uhr [/SIZE]

Ein Log schreibt er mir immer noch nicht:

2015/03/24 20:20:33 50BD80 h (reader) Intern_Upper_V14 [internal] Restarting reader
2015/03/24 20:20:33 50BD80 h (reader) Intern_Upper_V14 [internal] creating thread for device /dev/sci0
2015/03/24 20:20:33 553B30 r (reader) Intern_Upper_V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=343, cardmhz=357)
2015/03/24 20:20:33 553B30 r (reader) Intern_Upper_V14 [internal] Reader sci internal, detected box type: spark7162
2015/03/24 20:20:34 553B30 r (reader) Intern_Upper_V14 [internal] card detected
2015/03/24 20:20:36 50F048 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/24 20:20:36 553B30 r (reader) Intern_Upper_V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/03/24 20:20:36 553B30 r (reader) Intern_Upper_V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/03/24 20:20:36 553B30 r (reader) Intern_Upper_V14 [internal] Calculated work ETU is 18.60 us reader mhz = 500
2015/03/24 20:20:36 553B30 r (reader) Intern_Upper_V14 [internal] Buffers readed 0 bytes total time_us 79272
2015/03/24 20:20:37 553B30 r (reader) Intern_Upper_V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/03/24 20:20:38 553B30 r (reader) Intern_Upper_V14 [internal] Credit available on card: 0 euro
2015/03/24 20:20:38 553B30 r (reader) Intern_Upper_V14 [internal] Extended 4C detected
2015/03/24 20:20:39 553B30 r (reader) Intern_Upper_V14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/03/24 20:20:39 553B30 r (reader) Intern_Upper_V14 [internal] found card system videoguard2
2015/03/24 20:20:39 553B30 r (reader) Intern_Upper_V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/24 20:20:39 553B30 r (reader) Intern_Upper_V14 [videoguard2] card detected
2015/03/24 20:20:39 553B30 r (reader) Intern_Upper_V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/03/24 20:20:39 50F048 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/24 20:20:40 553B30 r (reader) Intern_Upper_V14 [videoguard2] Deactivating card
2015/03/24 20:20:40 553B30 r (reader) Intern_Upper_V14 [videoguard2] creating thread for device /dev/sci0
2015/03/24 20:20:40 54FA18 r (reader) Intern_Upper_V14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2015/03/24 20:20:40 54FA18 r (reader) Intern_Upper_V14 [videoguard2] Reader sci internal, detected box type: spark7162
2015/03/24 20:20:40 54FA18 r (reader) Intern_Upper_V14 [videoguard2] card detected
2015/03/24 20:20:42 50F048 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/24 20:20:43 54FA18 r (reader) Intern_Upper_V14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/03/24 20:20:43 54FA18 r (reader) Intern_Upper_V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/03/24 20:20:43 54FA18 r (reader) Intern_Upper_V14 [internal] Calculated work ETU is 4.65 us reader mhz = 500
2015/03/24 20:20:43 54FA18 r (reader) Intern_Upper_V14 [internal] Buffers readed 0 bytes total time_us 79447
2015/03/24 20:20:45 54FA18 r (reader) Intern_Upper_V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/03/24 20:20:46 50F048 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/24 20:20:48 54FA18 r (reader) Intern_Upper_V14 [internal] card system not supported
2015/03/24 20:20:48 54FA18 r (reader) Intern_Upper_V14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/03/24 20:20:49 50F048 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/24 20:20:52 54FA18 r (reader) Intern_Upper_V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/03/24 20:20:52 54FA18 r (reader) Intern_Upper_V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/03/24 20:20:52 54FA18 r (reader) Intern_Upper_V14 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/03/24 20:20:52 54FA18 r (reader) Intern_Upper_V14 [internal] Buffers readed 0 bytes total time_us 79416
2015/03/24 20:20:52 50F048 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/24 20:20:52 54FA18 r (reader) Intern_Upper_V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/03/24 20:20:55 50F048 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/24 20:20:55 54FA18 r (reader) Intern_Upper_V14 [internal] card system not supported
2015/03/24 20:20:55 54FA18 r (reader) Intern_Upper_V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/03/24 20:20:55 54FA18 r (reader) Intern_Upper_V14 [internal] card initializing error
2015/03/24 20:20:58 50F048 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/24 20:20:55 54FA18 r (reader) Intern_Upper_V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/03/24 20:20:55 54FA18 r (reader) Intern_Upper_V14 [internal] card initializing error
2015/03/24 20:20:58 50F048 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/24 20:21:35 50F048 c (-) -- Skipped 11 duplicated log lines --
2015/03/24 20:22:35 50F048 c (-) -- Skipped 20 duplicated log lines --
2015/03/24 20:22:54 50BD80 h (-) -- Skipped 7 duplicated log lines --
2015/03/24 20:22:54 50BD80 h >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10615 (sh4-streamboard-linux-gnu)
2015/03/24 20:22:57 50F048 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Ich glaube, daß mit den Einstellungen insgesamt irgendwas nicht in Ordnung ist.

motek10 · 25. März 2015

AW: Komme mit den MHZ und Log Einstellungen nicht klar

dein Reader cfg

enable = 0 # Reader aus

dodo83 · 25. März 2015

AW: Komme mit den MHZ und Log Einstellungen nicht klar

dann würde auch das nicht kommen im log

2015/03/24 20:20:33 50BD80 h (reader) Intern_Upper_V14 [internal] creating thread for device /dev/sci0
2015/03/24 20:20:33 553B30 r (reader) Intern_Upper_V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=343, cardmhz=357)
2015/03/24 20:20:33 553B30 r (reader) Intern_Upper_V14 [internal] Reader sci internal, detected box type: spark7162
2015/03/24 20:20:34 553B30 r (reader) Intern_Upper_V14 [internal] card detected

wenn er aus wär

Suche

Suche

Komme mit den MHZ und Log Einstellungen nicht klar

renerocker

Ist oft hier

Shamrock

Spezialist

dodo83

renerocker

Ist oft hier

motek10

Ist gelegentlich hier

dodo83

Ähnliche Themen

Spenden Unterstützung