Könnte vielleicht mal jemand von euch mit rein schauen

[mr.nice53]

Ich bekomme denn Pingulux nicht so richtig zum laufen zum laufen vielleicht kann ja wer von euch helfen hier mal der

oscam.log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:35:01 2000
-------------------------------------------------------------------------------
2000/01/01 0:35:01 1369 s version=0.99.4svn, build #2781, system=sh4-stb-linux, nice=-1
2000/01/01 0:35:01 1369 s max. clients=29, client max. idle=120 sec
2000/01/01 0:35:01 1369 s max. logsize=unlimited
2000/01/01 0:35:01 1369 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:35:01 1369 s shared memory initialized (size=491914, fd=3)
2000/01/01 0:35:01 1369 s auth size=4764
2000/01/01 0:35:01 1369 s services reloaded: 0 services freed, 2 services loaded
2000/01/01 0:35:01 1369 s userdb reloaded: 0 accounts freed, 5 accounts loaded, 0 expired, 1 disabled
2000/01/01 0:35:01 1369 s signal handling initialized (type=sysv)
2000/01/01 0:35:01 1369 s 772 service-id's loaded
2000/01/01 0:35:01 1369 s 4 provid's loaded
2000/01/01 0:35:01 1369 s 1 lengths for caid guessing loaded
2000/01/01 0:35:01 1369 s monitor: initialized (fd=8, port=988)
2000/01/01 0:35:01 1369 s camd 3.3x: disabled
2000/01/01 0:35:01 1369 s camd 3.5x: disabled
2000/01/01 0:35:01 1369 s cs378x: disabled
2000/01/01 0:35:01 1369 s newcamd: initialized (fd=9, port=10000, crypted)
2000/01/01 0:35:01 1369 s CAID: 0100
2000/01/01 0:35:01 1369 s provid #0: FFFFFF
2000/01/01 0:35:01 1369 s newcamd: initialized (fd=10, port=10001, crypted)
2000/01/01 0:35:01 1369 s CAID: 0200
2000/01/01 0:35:01 1369 s provid #0: FFF000
2000/01/01 0:35:01 1369 s provid #1: FFFF00
2000/01/01 0:35:01 1369 s newcamd: initialized (fd=11, port=10002, crypted)
2000/01/01 0:35:01 1369 s CAID: 0300
2000/01/01 0:35:01 1369 s provid #0: FFFFFF
2000/01/01 0:35:01 1369 s cccam: initialized (fd=12, port=40000, crypted)
2000/01/01 0:35:01 1369 s radegast: disabled
2000/01/01 0:35:01 1369 s logger started (pid=1370)
2000/01/01 0:35:01 1369 s reader started (pid=1371, device=/dev/sci0)
2000/01/01 0:35:01 1369 s waiting for local card init
2000/01/01 0:35:01 1371 r01 card detected
2000/01/01 0:35:06 1371 r01 Error activating card. this is justdddddddddddddddddddddddddddddddddddddddddddddddddddddd
2000/01/01 0:35:11 1371 r01 Error activating card. this is justdddddddddddddddddddddddddddddddddddddddddddddddddddddd
2000/01/01 0:35:16 1371 r01 Error activating card. this is justdddddddddddddddddddddddddddddddddddddddddddddddddddddd
2000/01/01 0:35:22 1371 r01 Error activating card. this is justdddddddddddddddddddddddddddddddddddddddddddddddddddddd
2000/01/01 0:35:27 1371 r01 Error activating card. this is justdddddddddddddddddddddddddddddddddddddddddddddddddddddd
2000/01/01 0:35:28 1371 r01 card initializing error
2000/01/01 0:35:28 1369 s init for all local cards done
2000/01/01 0:35:28 1369 s anti cascading disabled
2000/01/01 0:35:28 1369 s dvbapi: dvbapi disabled
2000/01/01 0:39:27 1369 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:40:15 2000
-------------------------------------------------------------------------------
2000/01/01 0:40:15 1374 s version=0.99.4svn, build #2781, system=sh4-stb-linux, nice=-1
2000/01/01 0:40:15 1374 s max. clients=29, client max. idle=120 sec
2000/01/01 0:40:15 1374 s max. logsize=unlimited
2000/01/01 0:40:15 1374 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:40:15 1374 s shared memory initialized (size=491914, fd=3)
2000/01/01 0:40:15 1374 s auth size=4764
2000/01/01 0:40:15 1374 s services reloaded: 0 services freed, 2 services loaded
2000/01/01 0:40:16 1374 s userdb reloaded: 0 accounts freed, 5 accounts loaded, 0 expired, 1 disabled
2000/01/01 0:40:16 1374 s signal handling initialized (type=sysv)
2000/01/01 0:40:16 1374 s 772 service-id's loaded
2000/01/01 0:40:16 1374 s 4 provid's loaded
2000/01/01 0:40:16 1374 s 1 lengths for caid guessing loaded
2000/01/01 0:40:16 1374 s monitor: initialized (fd=8, port=988)
2000/01/01 0:40:16 1374 s camd 3.3x: disabled
2000/01/01 0:40:16 1374 s camd 3.5x: disabled
2000/01/01 0:40:16 1374 s cs378x: disabled
2000/01/01 0:40:16 1374 s newcamd: initialized (fd=9, port=10000, crypted)
2000/01/01 0:40:16 1374 s CAID: 0100
2000/01/01 0:40:16 1374 s provid #0: FFFFFF
2000/01/01 0:40:16 1374 s newcamd: initialized (fd=10, port=10001, crypted)
2000/01/01 0:40:16 1374 s CAID: 0200
2000/01/01 0:40:16 1374 s provid #0: FFF000
2000/01/01 0:40:16 1374 s provid #1: FFFF00
2000/01/01 0:40:16 1374 s newcamd: initialized (fd=11, port=10002, crypted)
2000/01/01 0:40:16 1374 s CAID: 0300
2000/01/01 0:40:16 1374 s provid #0: FFFFFF
2000/01/01 0:40:16 1374 s cccam: initialized (fd=12, port=40000, crypted)
2000/01/01 0:40:16 1374 s radegast: disabled
2000/01/01 0:40:16 1374 s logger started (pid=1375)
2000/01/01 0:40:16 1374 s reader started (pid=1376, device=/dev/sci0)
2000/01/01 0:40:16 1374 s waiting for local card init
2000/01/01 0:40:16 1376 r01 card detected
2000/01/01 0:40:21 1376 r01 Error activating card.
2000/01/01 0:40:26 1376 r01 Error activating card.
2000/01/01 0:40:31 1376 r01 Error activating card.
2000/01/01 0:40:36 1376 r01 Error activating card.
2000/01/01 0:40:42 1376 r01 Error activating card.
2000/01/01 0:40:42 1376 r01 card initializing error
2000/01/01 0:40:42 1374 s init for all local cards done
2000/01/01 0:40:42 1374 s anti cascading disabled
2000/01/01 0:40:42 1374 s dvbapi: dvbapi disabled
2000/01/01 0:45:57 1374 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:05:53 2000
-------------------------------------------------------------------------------
2000/01/01 0:05:53 296BB000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4638 (sh4-stb-linux)
2000/01/01 0:05:53 296BB000 s version=1.00-unstable_svn, build #4638, system=sh4-stb-linux, nice=-1
2000/01/01 0:05:53 296BB000 s client max. idle=120 sec, debug level=0
2000/01/01 0:05:53 296BB000 s max. logsize=unlimited
2000/01/01 0:05:53 296BB000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:05:53 296BB000 s auth size=4968
2000/01/01 0:05:53 296BB000 s services reloaded: 0 services freed, 4 services loaded
2000/01/01 0:05:53 296BB000 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:05:53 296BB000 s signal handling initialized (type=sysv)
2000/01/01 0:05:54 296BB000 s 9296 service-id's loaded
2000/01/01 0:05:54 296BB000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2000/01/01 0:05:54 296BB000 s 4 provid's loaded
2000/01/01 0:05:54 296BB000 s 1 lengths for caid guessing loaded
2000/01/01 0:05:54 296BB000 s monitor: initialized (fd=7, port=988)
2000/01/01 0:05:54 296BB000 s camd33: disabled
2000/01/01 0:05:54 296BB000 s camd35: disabled
2000/01/01 0:05:54 296BB000 s cs378x: disabled
2000/01/01 0:05:54 296BB000 s newcamd: disabled
2000/01/01 0:05:54 296BB000 s cccam: disabled
2000/01/01 0:05:54 296BB000 s radegast: disabled
2000/01/01 0:05:54 296BB000 s http thread started
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:05:54 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:05:54 296BB000 s waiting for local card init
2000/01/01 0:05:54 296BB000 s init for all local cards done
2000/01/01 0:05:54 296BB000 s anti cascading disabled
2000/01/01 0:05:54 2AED44E8 c plain dvbapi-client granted (local, au=1)
2000/01/01 0:05:54 2AED44E8 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2000/01/01 0:05:54 2A6D44E8 h HTTP Server couldn't bind on port 8888 (errno=98). Not starting HTTP!
2000/01/01 0:06:06 2AED44E8 c dvbapi: [ADD PID 0] CAID: 1833 ECM_PID: 1809 PROVID: 000000
2000/01/01 0:06:06 2AED44E8 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C09 PROVID: 000000
2000/01/01 0:06:06 2AED44E8 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1B09 PROVID: 000000
2000/01/01 0:06:06 2AED44E8 c dvbapi: [ADD PID 3] CAID: 09C7 ECM_PID: 1D09 PROVID: 000000
2000/01/01 0:06:06 2AED44E8 c dvbapi: [ADD PID 4] CAID: 09AF ECM_PID: 1F09 PROVID: 000000
2000/01/01 0:06:06 2AED44E8 c dvbapi: [ADD PID 5] CAID: 1861 ECM_PID: 1909 PROVID: 000000
2000/01/01 0:06:06 2AED44E8 c dvbapi: new program number: 006A (1833:006A unknown)
2000/01/01 0:06:06 2AED44E8 c local (1833&000000/006A/93:8D87): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:07 2AED44E8 c local (1834&000000/006A/89:00A9): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:07 2AED44E8 c local (09C4&000000/006A/90:4FAD): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:07 2AED44E8 c local (09C7&000000/006A/A6:E1C6): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:07 2AED44E8 c local (09AF&000000/006A/8D:0A4B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:07 2AED44E8 c dvbapi: try pids again #1
2000/01/01 0:06:07 2AED44E8 c local (1861&000000/006A/8E:EB31): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:08 2AED44E8 c local (1833&000000/006A/93:8D87): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:08 2AED44E8 c local (1834&000000/006A/89:00A9): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:08 2AED44E8 c local (09C4&000000/006A/90:4FAD): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:09 2AED44E8 c local (09C7&000000/006A/A6:E1C6): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:09 2AED44E8 c local (09AF&000000/006A/8D:0A4B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:09 2AED44E8 c dvbapi: try pids again #2
2000/01/01 0:06:09 2AED44E8 c local (1861&000000/006A/8E:EB31): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:09 2AED44E8 c local (1833&000000/006A/93:8D87): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:09 2AED44E8 c local (1834&000000/006A/89:00A9): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:10 2AED44E8 c local (09C4&000000/006A/90:4FAD): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:10 2AED44E8 c local (09C7&000000/006A/A6:E1C6): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:10 2AED44E8 c local (09AF&000000/006A/8D:0A4B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:10 2AED44E8 c dvbapi: try pids again #3
2000/01/01 0:06:10 2AED44E8 c dvbapi: can't decode channel
2000/01/01 0:06:10 2AED44E8 c local (1861&000000/006A/8E:EB31): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:48 2AED44E8 c dvbapi: [ADD PID 0] CAID: 1833 ECM_PID: 1809 PROVID: 000000
2000/01/01 0:06:48 2AED44E8 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C09 PROVID: 000000
2000/01/01 0:06:48 2AED44E8 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1B09 PROVID: 000000
2000/01/01 0:06:48 2AED44E8 c dvbapi: [ADD PID 3] CAID: 09C7 ECM_PID: 1D09 PROVID: 000000
2000/01/01 0:06:48 2AED44E8 c dvbapi: [ADD PID 4] CAID: 09AF ECM_PID: 1F09 PROVID: 000000
2000/01/01 0:06:48 2AED44E8 c dvbapi: [ADD PID 5] CAID: 1861 ECM_PID: 1909 PROVID: 000000
2000/01/01 0:06:48 2AED44E8 c dvbapi: new program number: 006A (1833:006A unknown)
2000/01/01 0:06:48 2AED44E8 c local (1833&000000/006A/93:9A8B): rejected group (2 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:48 2AED44E8 c local (1834&000000/006A/89:441B): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:48 2AED44E8 c local (09C4&000000/006A/90:607F): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:49 2AED44E8 c local (09C7&000000/006A/A6:A0D3): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:49 2AED44E8 c local (09AF&000000/006A/8D:7638): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:49 2AED44E8 c dvbapi: try pids again #1
2000/01/01 0:06:49 2AED44E8 c local (1861&000000/006A/8E:1C0A): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:49 2AED44E8 c local (1833&000000/006A/93:9A8B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:50 2AED44E8 c local (1834&000000/006A/89:441B): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:50 2AED44E8 c local (09C4&000000/006A/90:607F): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:50 2AED44E8 c local (09C7&000000/006A/A6:A0D3): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:51 2AED44E8 c local (09AF&000000/006A/8D:7638): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:51 2AED44E8 c dvbapi: try pids again #2
2000/01/01 0:06:51 2AED44E8 c local (1861&000000/006A/8E:1C0A): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:51 2AED44E8 c local (1833&000000/006A/93:9A8B): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:51 2AED44E8 c local (1834&000000/006A/89:441B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:51 2AED44E8 c local (09C4&000000/006A/90:607F): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:52 2AED44E8 c local (09C7&000000/006A/A6:A0D3): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:52 2AED44E8 c local (09AF&000000/006A/8D:7638): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:06:52 2AED44E8 c dvbapi: try pids again #3
2000/01/01 0:06:52 2AED44E8 c dvbapi: can't decode channel
2000/01/01 0:06:52 2AED44E8 c local (1861&000000/006A/8E:1C0A): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:23:29 296BB000 s exit with signal 15
2000/01/01 0:23:29 296BB000 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:23:32 2000
-------------------------------------------------------------------------------
2000/01/01 0:23:32 296BB000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4638 (sh4-stb-linux)
2000/01/01 0:23:32 296BB000 s version=1.00-unstable_svn, build #4638, system=sh4-stb-linux, nice=-1
2000/01/01 0:23:32 296BB000 s client max. idle=120 sec, debug level=0
2000/01/01 0:23:32 296BB000 s max. logsize=unlimited
2000/01/01 0:23:32 296BB000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:23:32 296BB000 s auth size=4968
2000/01/01 0:23:32 296BB000 s services reloaded: 0 services freed, 4 services loaded
2000/01/01 0:23:32 296BB000 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:23:32 296BB000 s signal handling initialized (type=sysv)
2000/01/01 0:23:33 296BB000 s 9296 service-id's loaded
2000/01/01 0:23:33 296BB000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2000/01/01 0:23:33 296BB000 s 4 provid's loaded
2000/01/01 0:23:33 296BB000 s 1 lengths for caid guessing loaded
2000/01/01 0:23:33 296BB000 s monitor: initialized (fd=7, port=988)
2000/01/01 0:23:33 296BB000 s camd33: disabled
2000/01/01 0:23:33 296BB000 s camd35: disabled
2000/01/01 0:23:33 296BB000 s cs378x: disabled
2000/01/01 0:23:33 296BB000 s newcamd: disabled
2000/01/01 0:23:33 296BB000 s cccam: disabled
2000/01/01 0:23:33 296BB000 s radegast: disabled
2000/01/01 0:23:33 2A6D44E8 h HTTP Server couldn't bind on port 8888 (errno=98). Not starting HTTP!
2000/01/01 0:23:33 296BB000 s http thread started
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:33 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:33 296BB000 s waiting for local card init
2000/01/01 0:23:33 296BB000 s init for all local cards done
2000/01/01 0:23:33 296BB000 s anti cascading disabled
2000/01/01 0:23:33 2A6D44E8 c plain dvbapi-client granted (local, au=1)
2000/01/01 0:23:33 2A6D44E8 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2000/01/01 0:23:39 296BB000 s exit with signal 15
2000/01/01 0:23:39 296BB000 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:23:42 2000
-------------------------------------------------------------------------------
2000/01/01 0:23:42 296BB000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4638 (sh4-stb-linux)
2000/01/01 0:23:42 296BB000 s version=1.00-unstable_svn, build #4638, system=sh4-stb-linux, nice=-1
2000/01/01 0:23:42 296BB000 s client max. idle=120 sec, debug level=0
2000/01/01 0:23:42 296BB000 s max. logsize=unlimited
2000/01/01 0:23:42 296BB000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:23:42 296BB000 s auth size=4968
2000/01/01 0:23:42 296BB000 s services reloaded: 0 services freed, 4 services loaded
2000/01/01 0:23:42 296BB000 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:23:42 296BB000 s signal handling initialized (type=sysv)
2000/01/01 0:23:43 296BB000 s 9296 service-id's loaded
2000/01/01 0:23:43 296BB000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2000/01/01 0:23:43 296BB000 s 4 provid's loaded
2000/01/01 0:23:43 296BB000 s 1 lengths for caid guessing loaded
2000/01/01 0:23:43 296BB000 s monitor: initialized (fd=7, port=988)
2000/01/01 0:23:43 296BB000 s camd33: disabled
2000/01/01 0:23:43 296BB000 s camd35: disabled
2000/01/01 0:23:43 296BB000 s cs378x: disabled
2000/01/01 0:23:43 296BB000 s newcamd: disabled
2000/01/01 0:23:43 296BB000 s cccam: disabled
2000/01/01 0:23:43 296BB000 s radegast: disabled
2000/01/01 0:23:43 2A6D44E8 h HTTP Server couldn't bind on port 8888 (errno=98). Not starting HTTP!
2000/01/01 0:23:43 296BB000 s http thread started
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:43 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:43 296BB000 s waiting for local card init
2000/01/01 0:23:43 296BB000 s init for all local cards done
2000/01/01 0:23:43 296BB000 s anti cascading disabled
2000/01/01 0:23:43 2A6D44E8 c plain dvbapi-client granted (local, au=1)
2000/01/01 0:23:43 2A6D44E8 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2000/01/01 0:23:49 296BB000 s exit with signal 15
2000/01/01 0:23:49 296BB000 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:23:52 2000
-------------------------------------------------------------------------------
2000/01/01 0:23:52 296BB000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4638 (sh4-stb-linux)
2000/01/01 0:23:52 296BB000 s version=1.00-unstable_svn, build #4638, system=sh4-stb-linux, nice=-1
2000/01/01 0:23:52 296BB000 s client max. idle=120 sec, debug level=0
2000/01/01 0:23:52 296BB000 s max. logsize=unlimited
2000/01/01 0:23:52 296BB000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:23:52 296BB000 s auth size=4968
2000/01/01 0:23:52 296BB000 s services reloaded: 0 services freed, 4 services loaded
2000/01/01 0:23:52 296BB000 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:23:52 296BB000 s signal handling initialized (type=sysv)
2000/01/01 0:23:53 296BB000 s 9296 service-id's loaded
2000/01/01 0:23:53 296BB000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2000/01/01 0:23:53 296BB000 s 4 provid's loaded
2000/01/01 0:23:53 296BB000 s 1 lengths for caid guessing loaded
2000/01/01 0:23:53 296BB000 s monitor: initialized (fd=7, port=988)
2000/01/01 0:23:53 296BB000 s camd33: disabled
2000/01/01 0:23:53 296BB000 s camd35: disabled
2000/01/01 0:23:53 296BB000 s cs378x: disabled
2000/01/01 0:23:53 296BB000 s newcamd: disabled
2000/01/01 0:23:53 296BB000 s cccam: disabled
2000/01/01 0:23:53 296BB000 s radegast: disabled
2000/01/01 0:23:53 2A6D44E8 h HTTP Server couldn't bind on port 8888 (errno=98). Not starting HTTP!
2000/01/01 0:23:53 296BB000 s http thread started
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:53 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:23:53 296BB000 s waiting for local card init
2000/01/01 0:23:53 296BB000 s init for all local cards done
2000/01/01 0:23:53 296BB000 s anti cascading disabled
2000/01/01 0:23:53 2A6D44E8 c plain dvbapi-client granted (local, au=1)
2000/01/01 0:23:53 2A6D44E8 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2000/01/01 0:23:59 296BB000 s exit with signal 15
2000/01/01 0:23:59 296BB000 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:24:01 2000
-------------------------------------------------------------------------------
2000/01/01 0:24:01 296BB000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4638 (sh4-stb-linux)
2000/01/01 0:24:01 296BB000 s version=1.00-unstable_svn, build #4638, system=sh4-stb-linux, nice=-1
2000/01/01 0:24:01 296BB000 s client max. idle=120 sec, debug level=0
2000/01/01 0:24:01 296BB000 s max. logsize=unlimited
2000/01/01 0:24:01 296BB000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:24:01 296BB000 s auth size=4968
2000/01/01 0:24:01 296BB000 s services reloaded: 0 services freed, 4 services loaded
2000/01/01 0:24:01 296BB000 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:24:01 296BB000 s signal handling initialized (type=sysv)
2000/01/01 0:24:02 296BB000 s 9296 service-id's loaded
2000/01/01 0:24:02 296BB000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2000/01/01 0:24:02 296BB000 s 4 provid's loaded
2000/01/01 0:24:02 296BB000 s 1 lengths for caid guessing loaded
2000/01/01 0:24:02 296BB000 s monitor: initialized (fd=7, port=988)
2000/01/01 0:24:02 296BB000 s camd33: disabled
2000/01/01 0:24:02 296BB000 s camd35: disabled
2000/01/01 0:24:02 296BB000 s cs378x: disabled
2000/01/01 0:24:02 296BB000 s newcamd: disabled
2000/01/01 0:24:02 296BB000 s cccam: disabled
2000/01/01 0:24:02 296BB000 s radegast: disabled
2000/01/01 0:24:02 2A6D44E8 h HTTP Server couldn't bind on port 8888 (errno=98). Not starting HTTP!
2000/01/01 0:24:02 296BB000 s http thread started
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:02 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:02 296BB000 s waiting for local card init
2000/01/01 0:24:02 296BB000 s init for all local cards done
2000/01/01 0:24:02 296BB000 s anti cascading disabled
2000/01/01 0:24:02 2A6D44E8 c plain dvbapi-client granted (local, au=1)
2000/01/01 0:24:02 2A6D44E8 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2000/01/01 0:24:08 296BB000 s exit with signal 15
2000/01/01 0:24:08 296BB000 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:24:11 2000
-------------------------------------------------------------------------------
2000/01/01 0:24:11 296BB000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4638 (sh4-stb-linux)
2000/01/01 0:24:11 296BB000 s version=1.00-unstable_svn, build #4638, system=sh4-stb-linux, nice=-1
2000/01/01 0:24:11 296BB000 s client max. idle=120 sec, debug level=0
2000/01/01 0:24:11 296BB000 s max. logsize=unlimited
2000/01/01 0:24:11 296BB000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:24:11 296BB000 s auth size=4968
2000/01/01 0:24:11 296BB000 s services reloaded: 0 services freed, 4 services loaded
2000/01/01 0:24:11 296BB000 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:24:11 296BB000 s signal handling initialized (type=sysv)
2000/01/01 0:24:12 296BB000 s 9296 service-id's loaded
2000/01/01 0:24:12 296BB000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2000/01/01 0:24:12 296BB000 s 4 provid's loaded
2000/01/01 0:24:12 296BB000 s 1 lengths for caid guessing loaded
2000/01/01 0:24:12 296BB000 s monitor: initialized (fd=7, port=988)
2000/01/01 0:24:12 296BB000 s camd33: disabled
2000/01/01 0:24:12 296BB000 s camd35: disabled
2000/01/01 0:24:12 296BB000 s cs378x: disabled
2000/01/01 0:24:12 296BB000 s newcamd: disabled
2000/01/01 0:24:12 296BB000 s cccam: disabled
2000/01/01 0:24:12 296BB000 s radegast: disabled
2000/01/01 0:24:12 2A6D44E8 h HTTP Server couldn't bind on port 8888 (errno=98). Not starting HTTP!
2000/01/01 0:24:12 296BB000 s http thread started
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:12 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:12 296BB000 s waiting for local card init
2000/01/01 0:24:12 296BB000 s init for all local cards done
2000/01/01 0:24:12 296BB000 s anti cascading disabled
2000/01/01 0:24:12 2A6D44E8 c plain dvbapi-client granted (local, au=1)
2000/01/01 0:24:12 2A6D44E8 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2000/01/01 0:24:16 2A6D44E8 c dvbapi: [ADD PID 0] CAID: 1833 ECM_PID: 1809 PROVID: 000000
2000/01/01 0:24:16 2A6D44E8 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C09 PROVID: 000000
2000/01/01 0:24:16 2A6D44E8 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1B09 PROVID: 000000
2000/01/01 0:24:16 2A6D44E8 c dvbapi: [ADD PID 3] CAID: 09C7 ECM_PID: 1D09 PROVID: 000000
2000/01/01 0:24:16 2A6D44E8 c dvbapi: [ADD PID 4] CAID: 09AF ECM_PID: 1F09 PROVID: 000000
2000/01/01 0:24:16 2A6D44E8 c dvbapi: [ADD PID 5] CAID: 1861 ECM_PID: 1909 PROVID: 000000
2000/01/01 0:24:16 2A6D44E8 c dvbapi: new program number: 006A (1833:006A unknown)
2000/01/01 0:24:17 2A6D44E8 c local (1833&000000/006A/93:0814): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:17 2A6D44E8 c local (1834&000000/006A/89:8BD6): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:17 2A6D44E8 c local (09C4&000000/006A/90:319B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:17 2A6D44E8 c local (09C7&000000/006A/A6:FC71): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:17 2A6D44E8 c local (09AF&000000/006A/8D:56E3): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:17 2A6D44E8 c dvbapi: try pids again #1
2000/01/01 0:24:18 2A6D44E8 c local (1861&000000/006A/8E:A52D): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:18 2A6D44E8 c local (1833&000000/006A/93:7890): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:18 2A6D44E8 c local (1834&000000/006A/895A1): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:18 2A6D44E8 c local (09C4&000000/006A/90:319B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:18 2A6D44E8 c local (09C7&000000/006A/A6:FC71): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:19 2A6D44E8 c local (09AF&000000/006A/8D:56E3): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:19 2A6D44E8 c dvbapi: try pids again #2
2000/01/01 0:24:19 2A6D44E8 c local (1861&000000/006A/8E:C78C): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:19 2A6D44E8 c local (1833&000000/006A/93:7890): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:19 2A6D44E8 c local (1834&000000/006A/895A1): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:19 2A6D44E8 c local (09C4&000000/006A/90:319B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:20 2A6D44E8 c local (09C7&000000/006A/A6:FC71): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:20 2A6D44E8 c local (09AF&000000/006A/8D:56E3): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:20 2A6D44E8 c dvbapi: try pids again #3
2000/01/01 0:24:20 2A6D44E8 c dvbapi: can't decode channel
2000/01/01 0:24:20 2A6D44E8 c local (1861&000000/006A/8E:C78C): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:35 296BB000 s exit with signal 15
2000/01/01 0:24:35 296BB000 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:24:37 2000
-------------------------------------------------------------------------------
2000/01/01 0:24:37 296BB000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4638 (sh4-stb-linux)
2000/01/01 0:24:37 296BB000 s version=1.00-unstable_svn, build #4638, system=sh4-stb-linux, nice=-1
2000/01/01 0:24:37 296BB000 s client max. idle=120 sec, debug level=0
2000/01/01 0:24:37 296BB000 s max. logsize=unlimited
2000/01/01 0:24:37 296BB000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:24:37 296BB000 s auth size=4968
2000/01/01 0:24:37 296BB000 s services reloaded: 0 services freed, 4 services loaded
2000/01/01 0:24:37 296BB000 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:24:37 296BB000 s signal handling initialized (type=sysv)
2000/01/01 0:24:38 296BB000 s 9296 service-id's loaded
2000/01/01 0:24:38 296BB000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2000/01/01 0:24:38 296BB000 s 4 provid's loaded
2000/01/01 0:24:38 296BB000 s 1 lengths for caid guessing loaded
2000/01/01 0:24:38 296BB000 s monitor: initialized (fd=7, port=988)
2000/01/01 0:24:38 296BB000 s camd33: disabled
2000/01/01 0:24:38 296BB000 s camd35: disabled
2000/01/01 0:24:38 296BB000 s cs378x: disabled
2000/01/01 0:24:38 296BB000 s newcamd: disabled
2000/01/01 0:24:38 296BB000 s cccam: disabled
2000/01/01 0:24:38 296BB000 s radegast: disabled
2000/01/01 0:24:38 2A6D44E8 h HTTP Server couldn't bind on port 8888 (errno=98). Not starting HTTP!
2000/01/01 0:24:38 296BB000 s http thread started
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for cccam
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:38 296BB000 s loadbalancer: statistics could not be loaded for server
2000/01/01 0:24:38 296BB000 s waiting for local card init
2000/01/01 0:24:38 296BB000 s init for all local cards done
2000/01/01 0:24:38 296BB000 s anti cascading disabled
2000/01/01 0:24:38 2A6D44E8 c plain dvbapi-client granted (local, au=1)
2000/01/01 0:24:38 2A6D44E8 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2000/01/01 0:24:41 2A6D44E8 c dvbapi: [ADD PID 0] CAID: 1833 ECM_PID: 1809 PROVID: 000000
2000/01/01 0:24:41 2A6D44E8 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C09 PROVID: 000000
2000/01/01 0:24:41 2A6D44E8 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1B09 PROVID: 000000
2000/01/01 0:24:41 2A6D44E8 c dvbapi: [ADD PID 3] CAID: 09C7 ECM_PID: 1D09 PROVID: 000000
2000/01/01 0:24:41 2A6D44E8 c dvbapi: [ADD PID 4] CAID: 09AF ECM_PID: 1F09 PROVID: 000000
2000/01/01 0:24:41 2A6D44E8 c dvbapi: [ADD PID 5] CAID: 1861 ECM_PID: 1909 PROVID: 000000
2000/01/01 0:24:41 2A6D44E8 c dvbapi: new program number: 006A (1833:006A unknown)
2000/01/01 0:24:42 2A6D44E8 c local (1833&000000/006A/93:E372): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:42 2A6D44E8 c local (1834&000000/006A/89:11DD): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:42 2A6D44E8 c local (09C4&000000/006A/90:6A90): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:42 2A6D44E8 c local (09C7&000000/006A/A6:00BE): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:42 2A6D44E8 c local (09AF&000000/006A/8D:123F): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:43 2A6D44E8 c dvbapi: try pids again #1
2000/01/01 0:24:43 2A6D44E8 c local (1861&000000/006A/8E:C77A): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:43 2A6D44E8 c local (1833&000000/006A/93:E372): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:43 2A6D44E8 c local (1834&000000/006A/89:11DD): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:43 2A6D44E8 c local (09C4&000000/006A/90:6A90): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:43 2A6D44E8 c local (09C7&000000/006A/A6:00BE): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:44 2A6D44E8 c local (09AF&000000/006A/8D:123F): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:44 2A6D44E8 c dvbapi: try pids again #2
2000/01/01 0:24:44 2A6D44E8 c local (1861&000000/006A/8E:C77A): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:44 2A6D44E8 c local (1833&000000/006A/93:E372): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:44 2A6D44E8 c local (1834&000000/006A/89:11DD): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:44 2A6D44E8 c local (09C4&000000/006A/90:6A90): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:45 2A6D44E8 c local (09C7&000000/006A/A6:E72A): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:45 2A6D44E8 c local (09AF&000000/006A/8D:8002): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:24:45 2A6D44E8 c dvbapi: try pids again #3
2000/01/01 0:24:45 2A6D44E8 c dvbapi: can't decode channel
2000/01/01 0:24:45 2A6D44E8 c local (1861&000000/006A/8E:C77A): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:22 2A6D44E8 c dvbapi: [ADD PID 0] CAID: 1833 ECM_PID: 1809 PROVID: 000000
2000/01/01 0:25:22 2A6D44E8 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C09 PROVID: 000000
2000/01/01 0:25:22 2A6D44E8 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1B09 PROVID: 000000
2000/01/01 0:25:22 2A6D44E8 c dvbapi: [ADD PID 3] CAID: 09C7 ECM_PID: 1D09 PROVID: 000000
2000/01/01 0:25:22 2A6D44E8 c dvbapi: [ADD PID 4] CAID: 09AF ECM_PID: 1F09 PROVID: 000000
2000/01/01 0:25:22 2A6D44E8 c dvbapi: [ADD PID 5] CAID: 1861 ECM_PID: 1909 PROVID: 000000
2000/01/01 0:25:22 2A6D44E8 c dvbapi: new program number: 006A (1833:006A unknown)
2000/01/01 0:25:22 2A6D44E8 c local (1833&000000/006A/93:827C): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:23 2A6D44E8 c local (1834&000000/006A/89:690B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:23 2A6D44E8 c local (09C4&000000/006A/90282): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:23 2A6D44E8 c local (09C7&000000/006A/A6:4B23): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:24 2A6D44E8 c local (09AF&000000/006A/8D1BC): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:24 2A6D44E8 c dvbapi: try pids again #1
2000/01/01 0:25:24 2A6D44E8 c local (1861&000000/006A/8EC8C): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:24 2A6D44E8 c local (1833&000000/006A/93:827C): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:24 2A6D44E8 c local (1834&000000/006A/89:690B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:24 2A6D44E8 c local (09C4&000000/006A/90282): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:25 2A6D44E8 c local (09C7&000000/006A/A6:4B23): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:25 2A6D44E8 c local (09AF&000000/006A/8D1BC): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:25 2A6D44E8 c dvbapi: try pids again #2
2000/01/01 0:25:25 2A6D44E8 c local (1861&000000/006A/8EC8C): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:25 2A6D44E8 c local (1833&000000/006A/93:827C): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:25 2A6D44E8 c local (1834&000000/006A/89:690B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:26 2A6D44E8 c local (09C4&000000/006A/90282): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:26 2A6D44E8 c local (09C7&000000/006A/A6:4B23): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:26 2A6D44E8 c local (09AF&000000/006A/8D1BC): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:26 2A6D44E8 c dvbapi: try pids again #3
2000/01/01 0:25:26 2A6D44E8 c dvbapi: can't decode channel
2000/01/01 0:25:26 2A6D44E8 c local (1861&000000/006A/8EC8C): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:25:32 296BB000 s exit with signal 15
2000/01/01 0:25:32 296BB000 s cardserver down

 

[szonic]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

Hi,

das liegt weniger am Pingu, eher an fehlerhaften configs...so mal ins Blaue geraten.

Zeige sie uns, dann können wir bestimmt helfen. ;-)

Grüsse
szonic

 

[Pilot]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

Hallo mr.nice

es fehlen mir noch ein Infos.
1. Hast du die Karte im Pingulux oder hast eine Line
2. deine Configs fehlen mir auch

Als Fehler fehlt mir sofort das auf:
2000/01/01 0:35:11 1371 r01 Error activating card. this is
2000/01/01 0:35:28 1371 r01 card initializing error

Könnte sein, dass deine Karte noch nicht aktiviert wurde?
Um welche Karte handelt es sich?

Mlg piloten

 

[mr.nice53]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

ich habe eine V13 sie ist im pingu
meine Karte ist aktiviert sie geht schon seit eine halben Jahr vorher im Opticum
und dazu habe ich eine Line bekommen die geht auch

oscam.conf

Spoiler

[global]
nice = -1
WaitForCards = 1
saveinithistory = 1
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_reopen_seconds = 200

# logging

logfile = stdout
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw

# monitor

[monitor]
port = 9999
aulow = 120
monlevel = 1

# Web Interface

[webif]
httpport = 8888
httpuser = alien
httppwd = alien
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254


[dvbapi]
enabled = 1
user = alien
priority = 09C4,0D05,1702,1880,1830,1833,1801,0963,0B02,0100:003311,093B,0BAA,0D03:000008


[global]
usrfile = (null)
logfile = 09C7
cwlogdir = (null)
disablelog = 1
disableuserfile = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 0
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 100
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
resolvegethostbyname = 0

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 0
monlevel = 4
appendchaninfo = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = ines
pmt_mode = 1
priority = 09C4,1833,1830C
ignore = 1702

[webif]
httpport = 8888
httpuser = ines
httppwd = pass
httprefresh = 1
httpallowed = 0.0.0.0-255.255.255.254-192.168.254.254,10.0.0.1-10.0.254.254
httphideidleclients = 1
httpreadonly = 0


logfile = /var/log/oscam.log

 

[Pilot]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

Wenn du die Karte im pungu hast must du den internen Reder ansprechen:
oscam.server im pingulux mit einer HD+ Karte bei mir:

Spoiler

[reader]
label = reader
enable = 1
protocol = internal
device = /dev/sci0
services = hdplus
caid = 1830
rsakey = BF...............................................4DD5
boxkey = A................7C
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:000000,003411,008011
group = 1
emmcache = 1,2,3
lb_weight = 100

auf deine V13 Karte angepasst müsste der interne Reader so aus sehen:

Spoiler

[reader]
label = reader
enable = 1
protocol = internal
device = /dev/sci0
services = skysat
caid = 09C4
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:000000
group = 1
emmcache = 1,2,3
lb_weight = 100

oscam services dann so:

Spoiler

[skyfilm]
caid = 09C4,1833
provid = 000000
srvid = 000A,000B,002B,0009,0029,0014,0204,0203,0019,0008,1742,1744,1746,1748,171C,1718,174C,1728,17AC,174E,1842,1844,1848,181C,1818,184C,1828,18AC,184E,1846,18C0,18C2

[skywelt]
caid = 09C4,1833
provid = 000000
srvid = 002A,0015,0018,000E,0022,001C,0010,0013,00A8,000D,000C,001D,001A,001B,0024,0034,0032,0017,174A,171E,1740,1782,1772,175E,179C,17A0,1720,1722,1766,1768,176C,1764,176E,1770,1700,177E,1760,1762,0206,184A,181E,1840,1882,1872,185E,189C,18A0,1820,1822,1866,1868,186C,1864,186E,1870,1800,187E,1860,1862,0206,18A6,7001,7009,000F,2EFE

[skyhd]
caid = 09C4,1833
provid = 000000
srvid = 0081,0082,0083,0084,18B6,18BC,18B4,18B8,18BA,18B2,18B0,18B6,18C0,18C2,18C2,18BE,18BA,1807,1801,1809,180B,1805,1707,1701,1707,170B,1705,006A,006B,0071,0070,0072,006F,18B6,18BA,189A,1803,18B6,18B4,189A,0077,0084

[skyextra]
caid = 09C4,1833
provid = 000000
srvid = 3393,003E,3398,0042,3394,0043,3331,3395,0044,4462,003C,7009,700A,003F,3397,17E0,0148,17D6,17D2,17D0,17C6,17D4,0157,17C4,184E,17DC,003D,4461,700A,6FF1,3395,0016,18E0,0148,18D6,18D2,18D0,18C6,18D4,0157,18C4,184E,18DC,003D,4461,700A,6FF1,3395,0016,001B,01AC,1859,01BA,01BB,01B9,1859,6FF1,044D,18DE,18D8,0781,18DA

[skybulli]
caid = 09C4,1833
provid = 000000
srvid = 180C,170C,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,00FC

[skysport]
caid = 09C4,1833
provid = 000000
srvid = 0011,00DD,00DE,00FD,014D,0143,0139,012F,0125,011B,0107,0111,016B,0175,0035,176A,178E,0154,0158,186A,188E,186A,176A,178C,18E2,18BE,18BA,186A,118C,186A,188C,188E,0084,0077,3331,3335,0041

[skymce]
caid = 09C4,1833
provid = 000000
srvid = 0096,0097,0098,0099,009A,009B,009C,1750,1752,1754,1756,1758,175A,175C,1850,1852,1854,1856,1858,185A,185C

Oscam.user so:

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.00-unstable_svn build #4685
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = ines #hier natürlich deine User Name
pwd = pass # hier natürlich dein passwort
disabled = 0
expdate =
allowedtimeframe =
group = 1,2
hostname =
uniq = 0
sleep = 0
monlevel = 4
au = 1
services = hdplus,orf,austria_sat,skyfilm,skywelt,skyhd,skyextra,skybulli,skysport,skymce
caid = 09C4,1833
betatunnel = 1833.0072:1702,1833.006A:1702,1833.006B:1702,1833.006F:1702,1833.0070:1702,1833.0071:1702,1833.0075:1702,1833.007A:1702,1833.007B:1702,1833.007C:1702,1833.007E:1702,1833.007F:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702
ident = 0000:000000,003411,008011,041700,FFF400,020810,020820,024400,023800,030700,030B00,023B00,021110,040810,000000,000004,000010,FFFAA0,042200,042210
chid = 0604:000014,000069,0000F4,0000F5,0000FA
suppresscmd08 = 0
cccmaxhops = 3
cccreshare = 1
cccignorereshare = 0
sleepsend = 0
failban = 0
keepalive = 1

Oscam. config und hier speziell dvapi

Spoiler

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = ines #hier dein User Name rein.
pmt_mode = 1
priority = 09C4,1833

Das sind die Configs, die von dir erwartet hab vom pingulux.

Nach jeder Änderung der Configs oscam neu starten.
Den Reader für eine externe Line habe ich nicht rein gepackt, da die line ja alles hell macht bei dir.
Was noch wichtig ist. Jeder Reader hat eine group Nr.
Das mußt du natürlich beim User beachten. bei 2 Readern so group 1,2

Zum Schluß: jede oscam.services hab ich bei User und auch bei den Reader angehakt. Erst danach wurden die Sender hell bei mir.

Mlg piloten

 

[mr.nice53]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

mh so richtig geht das nicht habe dieses mal alles eingetragen von dir

bei mir schaut es jetzt so aus

oscam.server

Spoiler

##########################################################
# #
# All lines preceded by "#" are comment lines so #
# use this model for all your readers ( up to 32 ). #
# A C: line is a CCcam reader , a N: line is NewCamd #
# reader , the internal card readers are also shown. #
# A card reader must always to specify the CAID. #
# #
##########################################################
#
# this is an example of how to connect a CCcam server
# this line acts as a cccam 2.0.11 client ( recomended )
#
# [reader]
# label = cccam_server
# enable = 1
# protocol = cccam
# device = myserver.homelinux.com,12000
# account = username
# password = password
# cccversion = 2.0.11
# cccmaxhops = 2
# group = 1
#
# this is an example how to connect to a NewCamd server
#
#[reader]
#label = newcamd_server
#protocol = newcamd
#key = 0102030405060708091011121314
#device = xxxxxxx.dyndns.org,15050
#account = xxxxx,xxxxx
#group = 1

#
# this is an example how to "read" a na*ra card ( e.g. HD+ )
#
#
# [reader]
# Label = HD plus
# Protocol = internal
# Device = sci0
# detect = CD
# EMMCache = 1,1,2
# group = 1
# CAID = 1830
# n3_rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# n3_boxkey = A7642F57BC96D37C
#
#
# this is an example how to "read" a Viaccess card ( AKTA )
# the same rule apply to a Conax card replacing CAID with 0B02 ( Focus )
#
#
# [reader]
# Label = Akta
# Protocol = internal
# Device = sci0
# detect = CD
# EMMCache = 1,1,2
# group = 1
# CAID = 0500
#
#
# this is an example how to "read" a N*S card ( Dolce )
#
#
# [reader]
# Label = Dolce
# Protocol = internal
# Device = sci0
# detect = CD
# group = 1
# emmcache = 1,1,2
# caid = 092f
# boxid = 12345678
#


#[reader]
#label = cccam
#protocol = cccam
#device = xxxxxxxx.no-ip.org,12012
#account = xxxxxxx
#password = xxxxxxx
#emmcache = 1,1,2
#detect = cd
#group = 1,2
#caid = 1830,09C4

#[reader]
#label = server
#protocol = cccam
#device = xxxxxx.dyndns.org,12000
#account = xxxxxx
#password = xxxxxx
#group = 1,2,3
#fallback = 0
#cccmaxhop = 2
#caid = 09C4,1833,1830
#cccversion = 2.0.11
#cccbuild = 2892


[reader]
label = cccam_server
enable = 1
protocol = cccam
device = xxxxx.dyndns.org,15052
account = cccam
password = test
cccversion = 2.1.1
cccmaxhops = 2
group = 2

[reader]
label = reader
enable = 1
protocol = internal
device = /dev/sci0
services = skysat
caid = 09C4
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:000000
group = 1
emmcache = 1,2,3
lb_weight = 100

oscam.services
der bei mir aber unter root/plugin/var/tuxbox/config ist

Spoiler

#
# definition of services
#
# format:
# [name]
# caid = CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...

[services1]
caid = 0500
provid = 023700
srvid = 2775,2776,2777,2778,2779,277a,277b,277c,277d,278d

[services2]
caid = 0500
provid = 023800,040810,FFF430
srvid = 03de,038b,03b5,038b

[skyfilm]
caid = 09C4,1833
provid = 000000
srvid = 000A,000B,002B,0009,0029,0014,0204,0203,0019,0008, 1742,1744,1746,1748,171C,1718,174C,1728,17AC,174E, 1842,1844,1848,181C,1818,184C,1828,18AC,184E,1846, 18C0,18C2

[skywelt]
caid = 09C4,1833
provid = 000000
srvid = 002A,0015,0018,000E,0022,001C,0010,0013,00A8,000D, 000C,001D,001A,001B,0024,0034,0032,0017,174A,171E, 1740,1782,1772,175E,179C,17A0,1720,1722,1766,1768, 176C,1764,176E,1770,1700,177E,1760,1762,0206,184A, 181E,1840,1882,1872,185E,189C,18A0,1820,1822,1866, 1868,186C,1864,186E,1870,1800,187E,1860,1862,0206, 18A6,7001,7009,000F,2EFE

[skyhd]
caid = 09C4,1833
provid = 000000
srvid = 0081,0082,0083,0084,18B6,18BC,18B4,18B8,18BA,18B2, 18B0,18B6,18C0,18C2,18C2,18BE,18BA,1807,1801,1809, 180B,1805,1707,1701,1707,170B,1705,006A,006B,0071, 0070,0072,006F,18B6,18BA,189A,1803,18B6,18B4,189A, 0077,0084

[skyextra]
caid = 09C4,1833
provid = 000000
srvid = 3393,003E,3398,0042,3394,0043,3331,3395,0044,4462, 003C,7009,700A,003F,3397,17E0,0148,17D6,17D2,17D0, 17C6,17D4,0157,17C4,184E,17DC,003D,4461,700A,6FF1, 3395,0016,18E0,0148,18D6,18D2,18D0,18C6,18D4,0157, 18C4,184E,18DC,003D,4461,700A,6FF1,3395,0016,001B, 01AC,1859,01BA,01BB,01B9,1859,6FF1,044D,18DE,18D8, 0781,18DA

[skybulli]
caid = 09C4,1833
provid = 000000
srvid = 180C,170C,00DF,0106,0110,011A,0124,012E,0138,0142, 014C,0156,0160,00FC

[skysport]
caid = 09C4,1833
provid = 000000
srvid = 0011,00DD,00DE,00FD,014D,0143,0139,012F,0125,011B, 0107,0111,016B,0175,0035,176A,178E,0154,0158,186A, 188E,186A,176A,178C,18E2,18BE,18BA,186A,118C,186A, 188C,188E,0084,0077,3331,3335,0041

[skymce]
caid = 09C4,1833
provid = 000000
srvid = 0096,0097,0098,0099,009A,009B,009C,1750,1752,1754, 1756,1758,175A,175C,1850,1852,1854,1856,1858,185A, 185C

Oscam.user so:

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.00-unstable_svn build #4515
# Read more:

Sie müssen registriert sein, um Links zu sehen.

#[account]
#user = alien
#pwd = amiko
#group = 1
#au = 1
#betatunnel = 1833.FFFF:1702,1834.FFFF:1722



[account]
user = ines
pwd = pass
disabled = 0
expdate =
allowedtimeframe =
group = 1,2
hostname =
uniq = 0
sleep = 0
monlevel = 4
au = 1
services = skyfilm,skywelt,skyhd,skyex tra,skybulli,skysport,skymce
caid = 09C4,1833
betatunnel = 1833.0072:1702,1833.006A:1702,1833.006B:1702,1833. 006F:1702,1833.0070:1702,1833.0071:1702,1833.0075: 1702,1833.007A:1702,1833.007B:1702,1833.007C:1702, 1833.007E:1702,1833.007F:1702,1833.0080:1702,1833. 0081:1702,1833.0082:1702,1833.0083:1702,1833.0084: 1702
ident = 0000:000000,003411,008011,041700,FFF400,020810,020 820,024400,023800,030700,030B00,023B00,021110,0408 10,000000,000004,000010,FFFAA0,042200,042210
chid = 0604:000014,000069,0000F4,0000F5,0000FA
suppresscmd08 = 0
cccmaxhops = 3
cccreshare = 1
cccignorereshare = 0
sleepsend = 0
failban = 0
keepalive = 1

oscam.config

Spoiler

[global]
usrfile = (null)
logfile = 09C7
cwlogdir = (null)
disablelog = 1
disableuserfile = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 0
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 100
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
resolvegethostbyname = 0

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 0
monlevel = 4
appendchaninfo = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = ines
pmt_mode = 1
priority = 09C4,1833


[webif]
httpport = 8888
httpuser = ines
httppwd = pass
httprefresh = 1
httpallowed = 0.0.0.0-255.255.255.254-192.168.254.254,10.0.0.1-10.0.254.254
httphideidleclients = 1
httpreadonly = 0


logfile = /var/log/oscam.log


[/QUOTE]

newcamd.list

Spoiler

#CWS_KEEPALIVE = 300

#

#CWS_INCOMING_PORT = 21000

#
#This are the example lines
#
#
#
#CWS = myserver.dyndns.tv 22222 myuser mypassw 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server1

#
#CWS_MULTIPLE = myserver.dyndns.tv 20000:20005 myuser mypassw 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server2


F: cccam test 15052 2 1 1 { 0:0:2,09C4:0:0 }

CWS_KEEPALIVE = 300

CWS_INCOMING_PORT = 21000

CWS = xxxxxx.dyndns.org 34003 cccam test 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan

CWS = xxxxxx.dyndns.org 15052 cccam test 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan

CWS = xxxxxx.dyndns.org 34001 cccam test 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan

mg.cfg

Spoiler

#
# MgCamd 1.35 configuration file ( cccam netclient )
# CCcam 2.1.3 servers list in the file cccamd.list
#
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccam netclient
# 33 means CCcam and NewCamd client

G: { 32 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } ines pass

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 16 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 11 alien CSP or N: line
# 12 Fortis
B: { 11 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
# W: {

Sie müssen registriert sein, um Links zu sehen.

}

 

[Pilot]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

bevor ich mir das richtig in die Tiefe anschaue, beantworte mir bitte: Wieviel Lines bekommst von extern? Mit welchen Karten? Was sind das für Lines: C-Lines, N-Lines?

Mlg piloten

 

[mr.nice53]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

Ich bekomme eine C: Line von einer einer V13 denke ich mal es steht immer 09C4 beim log da.
Danke schon mal im voraus!

 

[Pilot]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

Hallo mr.nice,

hab jetzt ma deine Configs überarbeitet.
1. oscamserver: da du eine Karte im pingulux hast, brauchst einen internen Reader. Das ist der hier. Interner Reader:

Spoiler

[reader]
label = reader
enable = 1
protocol = internal
device = /dev/sci0
services = skysat
caid = 09C4
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:000000
group = 1
emmcache = 1,2,3
lb_weight = 100

Für deine externe Line brauchst du diesen Reader:

Spoiler

[reader]
label = cccam_server
enable = 1
protocol = cccam
device = xxxxx.dyndns.org,15052
account = cccam
password = test
cccversion = 2.1.1
cccmaxhops = 2
group = 2

Mehr brauchst du nicht. Ich hab bei den nicht gebrauchten Readern ein # Zeichen vorgemacht. Eigendlich kannst du die alle Löschn, wo ein # Zeichen vor ist.

oscam.user
Hier hast du meinen Bespiel User zusätzlich zu deinem dazu kopiert. Du brauchst nur einen User. Deshal hab ich vor deinem User ein # vorgestzt.
(Außer du willst den pingulux als Server einrichten)

oscam.config
Hier hast du meine oscam.config zu deiner dazu kopiert. Das geht so nicht.
Du solltest deine nur anpassen. Oder wenn du meine willst = deine vorher löschen.
Habs jetzt mal auf meine angepasst.

Wenn du jetzt ins Wi von oscam willst musst jetzt diese Namen und passwort nehmen: ines und pass

Spoiler

[webif]
httpport = 8888
httpuser = ines
httppwd = pass
httprefresh = 1
httpallowed = 0.0.0.0-255.255.255.254-192.168.254.254,10.0.0.1-10.0.254.254
httphideidleclients = 1
httpreadonly = 0

Mlg piloten

 

[mr.nice53]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

Ich möchte den pingu auch als Server nutzen vorerst
der Reader zeigt immer noch Error

 

[kenshiculus]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

wenn du ein E² image hast, dann geht im internen cardreader keine V13 im oscam, zwecks Treiberproblem

 

[Pilot]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

Kein Problem. Alles wie oben.
Zussätzlich in der oscam.config ein cccam Modul eintragen:

Spoiler

[cccam]
port = 33539
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.1.1
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
nodeid = 364A0E8E104613A6
reshare_mode = 0

So sieht dann die ganze oscam.config aus:

Spoiler

[global]
usrfile = (null)
logfile = 09C7
cwlogdir = (null)
disablelog = 1
disableuserfile = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 0
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 100
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
resolvegethostbyname = 0

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 0
monlevel = 4
appendchaninfo = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = ines
pmt_mode = 1
priority = 09C4,1833

[cccam]
port = 33539
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.1.1
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
nodeid = 364A0E8E104613A6
reshare_mode = 0


[webif]
httpport = 8888
httpuser = ines
httppwd = pass
httprefresh = 1
httpallowed = 0.0.0.0-255.255.255.254-192.168.254.254,10.0.0.1-10.0.254.254
httphideidleclients = 1
httpreadonly = 0


logfile = /var/log/oscam.log

Für jeden Clienten legst du im oscam.user einen account an.

Der jetzt im Moment da ist, den brauchst für den pingulux selbst.

Ein Hinweis: Owen Hart hat recht. Unter E2 bekommst du Ganze mit einer V13 Karte nicht zu laufen.
Aber unter Spark müsste es gehen.


Mlg piloten

 

[mr.nice53]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

Ich habe die Spark 1.1.42 wegen der V13 ja und der Reeder wird immer noch als Error angezeigt.
Kann das vielleicht an der oscam Version liegen ? Das sie nicht erkannt wird.

Kann der account genauso aussehen wie dieser
Dann muss ich dafür dann auch noch einen Reader hinzufügen in Server

 

[Pilot]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

Es könnte auch sein, dass deine Karte noch nicht aktiviert ist. Das habe ich dir hier schon geschrieben:

Stell mal Sky Sport info und lass dir ein Freischaltsignal von Sky schicken.
Du kannst die auch über das Internet Portal von Sky das Freischaltsignal schicken.
Dann lass die Finger von der Fernbedienung und lass es so lange auf Sky Sport Info stehen, bis das Bild annkommt. Auch wenns Stunden dauert.

Mlg piloten

 

[mr.nice53]

AW: Könnte vielleicht mal jemand von euch mit rein schauen

Ok das versuche ich gleich mal.