Keine Sender werden hell, obwohl Clients connected

[blade55]

Hallo,
ich habe mein system Igel Thinclient 4200 5/3 auf IPC 11.5 umgestellt,
Installation erfogreich verlaufen, ich habe alle Einstellungen machen können, die Clients (vu+solo + DM600) sind eingerichtet und connecten zum Oscam aber leider wird nichts hell.

Karten sind SO2 / HD+ (HD001) Reader sind beide Argolis smartreader

oscam.conf

Spoiler

global

logfile = /var/log/ipc/OScam.log
nice = -1
maxlogsize = 200

[cache]

[cccam]
port = 12000
serverip = 192.168.178.99
nodeid = EC2AFAA21024151A
version = 2.0.11
reshare = 0

[webif]
httpport = 15000
httpuser = admin
httppwd = post
httprefresh = 15
httppollrefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255

Oscam.user

Spoiler

account

user = vu+
pwd = sol
au = so2,hd+
group = 1,2

[account]
user = DM6
pwd = 000
au = so2
group = 1

oscam.reader

Spoiler

reader
label = so2
protocol = smartreader
device = Serial:Reader 5AD14D1
services = skysat
caid = 1702,1833
boxkey = 0815081508015
ecmwhitelist = 1702:93
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
saveemm-s = 1
saveemm-g = 1

[reader]
label = hd+
protocol = smartreader
device = Serial:Reader F065EAC
services = hd+
caid = 1830
boxkey = A7...
rsakey = BF...D5
ecmwhitelist = 1830:92
detect = cd
mhz = 534
cardmhz = 343
group = 2
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

auszug von oscam.log

Spoiler

2014/05/17 08:09:10 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9727 (i486-linux-gnu)
2014/05/17 08:09:10 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2521
2014/05/17 08:09:10 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/05/17 08:09:10 0 s userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled
2014/05/17 08:09:10 0 s signal handling initialized
2014/05/17 08:09:10 0 s 149 service-id's loaded in 2ms
2014/05/17 08:09:10 0 s 116 tier-id's loaded
2014/05/17 08:09:10 0 s 10 provid's loaded
2014/05/17 08:09:10 0 s cccam: initialized (fd=5, port=12000, ip=192.168.178.99)
2014/05/17 08:09:10 0 s Binary without Seca module - no EMM processing for Seca possible!
2014/05/17 08:09:10 0 s Binary without Viaccess module - no EMM processing for Viaccess possible!
2014/05/17 08:09:10 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2014/05/17 08:09:10 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2014/05/17 08:09:10 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2014/05/17 08:09:10 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2014/05/17 08:09:10 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2014/05/17 08:09:10 0 s so2 [smartreader] creating thread for device Serial:Reader 5AD14D1
2014/05/17 08:09:10 0 s hd+ [smartreader] creating thread for device Serial:Reader F065EAC
2014/05/17 08:09:10 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/05/17 08:09:10 0 s waiting for local card init
2014/05/17 08:09:10 896B158 r so2 [smartreader] De SR_init
2014/05/17 08:09:10 896B158 r so2 [smartreader] initing smargo type SR
2014/05/17 08:09:10 896B158 r so2 [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/05/17 08:09:10 896CCB8 r hd+ [smartreader] De SR_init
2014/05/17 08:09:10 896B158 r Found reader with serial Reader F065EAC at 004:003
2014/05/17 08:09:10 896B158 r Found smartreader device Serial:Reader F065EAC
2014/05/17 08:09:10 896B158 r so2 [smartreader] Creating smartreader thread.
2014/05/17 08:09:10 896CCB8 r hd+ [smartreader] initing smargo type SR
2014/05/17 08:09:10 896CCB8 r hd+ [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/05/17 08:09:10 896B158 r so2 [smartreader] clocking for smartreader with smartreader protocol
2014/05/17 08:09:10 896B158 r so2 [smartreader] Reader initialized (device=Serial:Reader F065EAC, detect=cd, mhz= AUTO, cardmhz=600)
2014/05/17 08:09:10 896CCB8 r Found reader with serial Reader 5AD14D1 at 004:002
2014/05/17 08:09:10 896CCB8 r Found smartreader device Serial:Reader F065EAC
2014/05/17 08:09:10 8987080 h webif: decompressed 146025 bytes back into 342892 bytes
2014/05/17 08:09:10 8987080 h HTTP Server running. ip=0.0.0.0 port=15000
2014/05/17 08:09:10 896CCB8 r hd+ [smartreader] Creating smartreader thread.
2014/05/17 08:09:10 896CCB8 r hd+ [smartreader] clocking for smartreader with smartreader protocol
2014/05/17 08:09:10 896CCB8 r hd+ [smartreader] Reader initialized (device=Serial:ReaderF065EAC, detect=cd, mhz= AUTO, cardmhz=343)
2014/05/17 08:09:11 896CCB8 r hd+ [smartreader] card detected
2014/05/17 08:09:11 896CCB8 r hd+ [smartreader] init card at 369 mhz
2014/05/17 08:09:11 896B158 r so2 [smartreader] card detected
2014/05/17 08:09:11 896B158 r so2 [smartreader] init card at 369 mhz
2014/05/17 08:09:16 896CCB8 r hd+ [smartreader] ATR: 5F BB 84 22 CC 74 56 24 DC 25 11 33 2A 69 35 05 13 43 23 02 25 56 67 74 34 65 82
2014/05/17 08:09:16 896CCB8 r hd+ [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/05/17 08:09:16 896CCB8 r hd+ [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
2014/05/17 08:09:16 896CCB8 r hd+ [smartreader] autospeed = 1
2014/05/17 08:09:16 896CCB8 r hd+ [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2014/05/17 08:09:16 896CCB8 r hd+ [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/05/17 08:09:16 896CCB8 r hd+ [smartreader] Card responded ok for ifsd request of 251
2014/05/17 08:09:17 896CCB8 r hd+ [smartreader] detect native nagra card
2014/05/17 08:09:19 896CCB8 r hd+ [smartreader] found card system nagra
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] ROM: C 0 B N 2 5 3
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] REV: R e v G C 6
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] SER: ############
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] CAID: 1830
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] Prv.ID: 11 11 45 22 (sysid)
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] Prv.ID: 00 00 00 00
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] IRD ID: ############
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] active to: 2014/07/07 12:59
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] -----------------------------------------
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] |id |tier |valid from |valid to |
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] +----+--------+------------+------------+
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] |8011|0064 |2011/08/18 |2012/08/18 |
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] |8011|0BEA |2012/08/23 |2014/10/13 |
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] -----------------------------------------
2014/05/17 08:09:19 896CCB8 r hd+ [nagra] ready for requests
2014/05/17 08:09:21 896B158 r so2 [smartreader] ATR: 4A 8G 10 1F 50 63 55 54 45 5G 31 52 34 35 92 73 44 GG 79 5C
2014/05/17 08:09:21 896B158 r so2 [smartreader] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/05/17 08:09:21 896B158 r so2 [smartreader] Calculated work ETU is 93.00 us reader mhz = 600
2014/05/17 08:09:21 896B158 r so2 [smartreader] autospeed = 1
2014/05/17 08:09:21 896B158 r so2 [smartreader] Effective reader settings mhz =600 F= 558 D= 1 N=0 T=14 inv=0 parity=NONE
2014/05/17 08:09:21 896B158 r so2 [smartreader] ATR Fsmax is 6 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 6.00 MHz (specified in reader->mhz)
2014/05/17 08:09:22 896B158 r so2 [smartreader] detect irdeto tunneled nagra card
2014/05/17 08:09:22 896B158 r so2 [smartreader] no rsa key configured -> using irdeto mode
2014/05/17 08:09:22 896B158 r so2 [smartreader] detect irdeto card
2014/05/17 08:09:22 896B158 r so2 [smartreader] caid: 1702, acs: 3.84, country code: GER
2014/05/17 08:09:22 896B158 r so2 [smartreader] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/05/17 08:09:25 896B158 r so2 [smartreader] active providers: 2 (000000,000000)
2014/05/17 08:09:25 896B158 r so2 [smartreader] found card system irdeto
2014/05/17 08:09:25 896B158 r so2 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/05/17 08:09:26 896B158 r so2 [irdeto] entitlements for provider: 2, id: 000000
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05DD, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05E7, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05F2, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 000F, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05E8, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0615, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05DF, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05FB, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05FC, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 7D23, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 00F0, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 7D27, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05DE, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 04CE, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05F1, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0276, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0609, date: 2012/11/25 - 2013/05/31
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0617, date: 2011/07/12 - 2012/03/22
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0605, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05F4, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05F5, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 05F6, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0606, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0612, date: 2013/08/06 - 2014/04/17
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0103, date: 2008/01/19 - 2008/01/21
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0104, date: 2008/01/19 - 2008/01/21
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0105, date: 2008/01/19 - 2008/01/21
2014/05/17 08:09:26 896B158 r so2 [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
2014/05/17 08:09:26 896B158 r so2 [irdeto] ready for requests
2014/05/17 08:09:27 0 s init for all local cards done
2014/05/17 08:09:27 0 s anti cascading disabled
2014/05/17 08:09:27 8996408 c anonymous disconnected from 192.168.178.26
2014/05/17 08:09:27 899B5B8 c encrypted cccam-client 192.168.178.35 granted (DM6, au=on (1 reader))
2014/05/17 08:09:27 89A58A0 c encrypted cccam-client 192.168.178.26 granted (vu+, au=on (2 reader))

Welche Files müsste ich noch posten ?

Hat jemand eine Idee, warum das nicht hell wird ?

mfg
blade55

 

[Bodo-1]

Zeig uns bitte mal ein Log , ab oscam Start bis Sender Anfrage !

Und nimm Box Key und rsa Key aus dem Hd+ Reader bitte raus , sind hier nicht erlaubt . Board Regeln .

In den User Accounts fehlt noch der Betatunnel für die s02 !


So bitte ; Betatunnel= 1833.FFFF:1702

Gruß Bodo


Sent from my iPhone using Tapatalk

 

[mxer]

AW: Keine Sender werden hell, obwohl Clients connected

Die Keys sind imaginär, also Entwarnung.
Die HD+ ist mit den eingestellten Werten etwas daneben, sollte 368 sein.
Laß erstmal die ECMWhitelist leer, kannst Du immer noch einrichten, wenn es erstmal rennt.

 

[blade55]

AW: Keine Sender werden hell, obwohl Clients connected

Hallo,
danke mxer, hast gut erkannt , das es fake serial und keys sind.
ECMWhitelist habe ich weggelassen und siehe da es funktioniert jetzt

mfg
blade55

 

[Jigsaw]

AW: Keine Sender werden hell, obwohl Clients connected

Betatunnel ist unnötig da beide Klienten "echtes" CCcam haben und warum so nen komischen boxkey bei der S02? Änder mal den Label Namen der s02, ich hätte mal ein Problem das die Karte nicht lief mit dem Namen S02 und komischerweise aber mit skyS02, Versuch ist es Wert.

 

[Bodo-1]

AW: Keine Sender werden hell, obwohl Clients connected

Im Log fehlt noch der Teil wo der Client den Sender anfragt , dieser wäre Intressant .




Sent from my iPhone using Tapatalk

 

[blade55]

AW: Keine Sender werden hell, obwohl Clients connected

Hallo,
danke für eure Antworten aber das Problem hat sich gelöst, habe ich in Post 4 geschrieben und auch den Präfix des Threads geändert.

mfg
blade55

 

[Alex]

AW: Keine Sender werden hell, obwohl Clients connected

Acuh wenn das Thema schon durch ist, hab ich es mal nach OScam verschoben, hat ja nix mit IPC zu tun.

al-x83