jetzt will ich einen weiter mouse betreiben mit einer orf ice.

[sevi_at]

Hallo,
habe seit kurzem probleme mit meinem system. ich habe derzeit eine Weiße HD+ Karte une eine A02 Karte mit easymouse2 am laufen. Dies funktioniert jetzt schon seit einigen monaten problemlos. jetzt will ich einen weiter mouse betreiben mit einer orf ice. das funktioniert aber nicht, da dann meine anderen reader nicht mehr problemlos funktionieren. Ich betreibe die reader mit einem externem powered usb hub. gehen beim rpi einfach nicht mehr als 2 reader? oder habe ich was falsch eingestellt? ohne orf ice geht wieder problemlos.

Log:

Spoiler

• 2015/06/30 21:23:45 187B7F8 c (ecm) fridl (1702&000000/0000/0008/93:A35B15D1A9FED383DD4EE1EDBA8F3D1D): found (619 ms) by A02 - Sky Comedy
• 2015/06/30 21:23:45 187B7F8 c (ecm) fridl (1830&000000/0000/151A/92:6D6C01048E642FE2452355E4D5503B99): rejected group (0 ms) - DMAX HD (no matching reader)
• 2015/06/30 21:23:47 1839D00 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:4D4677EA27C4A541C74FD6B1894CBDA0): rejected group (0 ms) - SAT.1 HD (no matching reader)
• 2015/06/30 21:23:51 1829598 r (reader) HD01 [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
• 2015/06/30 21:23:51 1829598 r (reader) HD01 [mouse] Error getting card status.
• 2015/06/30 21:23:52 1829598 r (reader) HD01 [mouse] card detected
• 2015/06/30 21:23:52 187B7F8 c (ecm) fridl (1702&000000/0000/0008/93:5C53214300935528775E5E3CE1555FF9): found (613 ms) by A02 - Sky Comedy
• 2015/06/30 21:23:52 1829598 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75262
• 2015/06/30 21:23:53 187B7F8 c (ecm) fridl (1830&000000/0000/151A/92:C35B8036EDFBFACBABC817C683D92EFF): rejected group (1 ms) - DMAX HD (no matching reader)
• 2015/06/30 21:23:53 1829598 r (reader) HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2015/06/30 21:23:53 1829598 r (reader) HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2015/06/30 21:23:53 1829598 r (reader) HD01 [mouse] Setting baudrate to 115200 bps
• 2015/06/30 21:23:53 1829598 r (reader) HD01 [mouse] Calculated work ETU is 8.67 us reader mhz = 369
• 2015/06/30 21:23:53 1829598 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75266
• 2015/06/30 21:23:53 1829598 r (reader) HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
• 2015/06/30 21:23:53 1829598 r (reader) HD01 [mouse] Card responded ok for ifsd request of 251
• 2015/06/30 21:23:54 1829598 r (reader) HD01 [mouse] detect native nagra card
• 2015/06/30 21:23:54 1829598 r (reader) HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/06/30 21:23:54 1829598 r (reader) HD01 [mouse] T1 Resync command succesfull ifsc = 251
• 2015/06/30 21:23:54 1829598 r (reader) HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/06/30 21:23:54 1829598 r (reader) HD01 [mouse] T1 Resync command succesfull ifsc = 251
• 2015/06/30 21:23:54 1829598 r (reader) HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/06/30 21:23:54 1829598 r (reader) HD01 [mouse] T1 Resync command succesfull ifsc = 251
• 2015/06/30 21:23:54 1829598 r (reader) HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/06/30 21:23:54 1829598 r (reader) HD01 [mouse] T1 Resync command succesfull ifsc = 251
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] T1 Resync command succesfull ifsc = 251
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] T1 Resync command succesfull ifsc = 251
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] T1 Resync command succesfull ifsc = 251
• 2015/06/30 21:23:55 1839D00 c (ecm) sevi_gigablue (1830&000000/0000/EF74/923CAF8E3E508C2C98E23E8DA242BAD11): rejected group (0 ms) - SAT.1 HD (no matching reader)
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] T1 Resync command succesfull ifsc = 251
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] T1 Resync command succesfull ifsc = 251
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] card system not supported
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] Normal mode failed, reverting to Deprecated Mode
• 2015/06/30 21:23:55 1829598 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75291
• 2015/06/30 21:23:56 1829598 r (reader) HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2015/06/30 21:23:56 1829598 r (reader) HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2015/06/30 21:23:56 1829598 r (reader) HD01 [mouse] Calculated work ETU is 100.81 us reader mhz = 369
• 2015/06/30 21:23:56 1829598 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75252
• 2015/06/30 21:23:56 1829598 r (reader) HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
• 2015/06/30 21:23:58 1829598 r (reader) HD01 [mouse] Warning: Card returned error on setting ifsd value to 251
• 2015/06/30 21:23:59 187B7F8 c (ecm) fridl (1702&000000/0000/0008/93:AB59E5C57B860D8469921DA9FFB049A3): found (611 ms) by A02 - Sky Comedy
• 2015/06/30 21:23:59 1829598 r (reader) HD01 [mouse] detect native nagra card
• 2015/06/30 21:24:01 1829598 r (reader) HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/06/30 21:24:01 187B7F8 c (ecm) fridl (1830&000000/0000/151A/92:58BE64ABF8ADDC9B885D7E245CF0AFF6): rejected group (1 ms) - DMAX HD (no matching reader)
• 2015/06/30 21:24:02 1829598 r (reader) HD01 [mouse] T1 Resync command error, trying to reactivate!
• 2015/06/30 21:24:02 1829598 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75256
• 2015/06/30 21:24:03 1839D00 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:6F09341F3B3CB14DD34CD510AB634892): rejected group (0 ms) - SAT.1 HD (no matching reader)
• 2015/06/30 21:24:03 1829598 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75254
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75259
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] ATR: 3F FF 95 00 FF 91 00 81 71 FE 00 47 00 44 4E 41 53 50 31 00 34 00 32 00 20 00 52 00
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] Init card protocol T0, FI=9, F=512, D=16, N=255
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] Setting baudrate to 115200 bps
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] Calculated work ETU is 8.67 us reader mhz = 369
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] Flush readed byte Nr 1 value 93 time_us 10216
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] Flush readed byte Nr 2 value 79 time_us 19704
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] Buffers readed 2 bytes total time_us 105953
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] card system not supported
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/06/30 21:24:05 1829598 r (reader) HD01 [mouse] card initializing error
• 2015/06/30 21:24:06 187B7F8 c (ecm) fridl (1702&000000/0000/0008/93:873B9A95E6AF75614F800FD1B824302F): found (615 ms) by A02 - Sky Comedy
• 2015/06/30 21:24:09 187B7F8 c (ecm) fridl (1830&000000/0000/151A/92:2C47C7274F6A8BCE5EDB9EE98472C6BD): rejected group (1 ms) - DMAX HD (no matching reader)

oscam.config

Spoiler

[reader]
label = HD01
protocol = mouse
device = /dev/ttyUSB1
caid = 1830
boxkey = A76XXXXXXXD37C
rsakey = BF358B5461XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
ecmwhitelist = 1830:92
detect = cd
mhz = 369
cardmhz = 368
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,3,2,0
auprovid = 003411


[reader]
label = A02
protocol = mouse
device = /dev/ttyUSB0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2,0


[reader]
label = orf-ice
enable = 0
protocol = mouse
device = /dev/ttyUSB2
services = orf
caid = 0D95
force_irdeto = 1
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2,0

auch services haben nichts gebracht!


Danke für eure hilfe!

 

[Radagast]

AW: jetzt will ich einen weiter mouse betreiben mit einer orf ice.

Hi,

der PI kann ohne weiteres mehr als nur 2 Cardreader ansprechen/verwalten.
Binde deine Cardreader aber am besten über udev ein. Ich fürchte bei dir liegt der Hund da begraben.

 

[sevi_at]

AW: jetzt will ich einen weiter mouse betreiben mit einer orf ice.

okay danke! wie geht das genau? mit

device = bus:device

hat das nicht funktioniert.

lsusb

Spoiler

Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 006: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

THX

 

[Radagast]

AW: jetzt will ich einen weiter mouse betreiben mit einer orf ice.

Hi,

na ganz so einfach geht das nicht ;-)
Schau dir mal dies hier https://www.digital-eliteboard.com/123204-faq-reader-ein-festen-port-zuweisen.html an. Das HowTo ist allerdings schon etwas älter und von daher gleich eine Anmerkung. Die anzulegende Datei sollte nicht 10-usbadapter.rules genannt werden sondern 99-usbadapter.rules da sich bei Linux doch ein paar Kleinigkeiten geändert haben.
Die iSerial des jeweiligen Cardreaders kannst du auch über das WebIf von OScam heraus finden -> Readers -> "Scan USB". Damit man nicht durcheinander kommt immer nur einen Reader anschließen um die iSerial zu ermitteln.

 

[sevi_at]

AW: jetzt will ich einen weiter mouse betreiben mit einer orf ice.

Servus, hab das jetzt mal gemacht. Udev funktioniert soweit doch leider ohne erfolg das log sieht noch genau so aus wie beim letztem post. Mir kommt vor als würden die reader beu starten... Eigentlich nur der HD01 reader

Was könnte da noch sein?

Danke!

 

[Radagast]

AW: jetzt will ich einen weiter mouse betreiben mit einer orf ice.

Wenn du udev erfolgreich eingerichtet hast und auch die dazu passenden Änderungen in der oscam.server vorgenommen hast, dann kann dein Log nicht mehr so aussehen wie vorher.
Poste es bitte mal.

 

[sevi_at]

AW: jetzt will ich einen weiter mouse betreiben mit einer orf ice.

Hy,
log wenn die easymouse der ORF-Karte auf pause steht:

Spoiler

• 2015/07/01 06:53:48 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:36178CA53C28FA9AD41121EB8817CF3E): found (308 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:53:55 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:0A53969F39DF49AA1B3563288968E89A): found (308 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:54:02 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:AFEC4B9CF25C2449FB1AF876E7B16E37): found (309 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:54:09 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:56C3E2867B11E824F7FB54289F4BD63E): found (308 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:54:16 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:B17E7040BA1BC0557841195078A9E147): found (309 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:54:23 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:4426AA4AA74DC839BDB7A1FDAEFDBCA4): found (309 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:54:30 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:9B02DDF29CA3A48826E76C385E95B6EA): found (309 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:54:37 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:1B02C4B0DEF22B8D6FDBC30B42717BDB): found (310 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:54:44 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:F326394AA9FC047D04389052E21E4C37): found (308 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:54:51 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:9695FA02A1766D06136B60B39815A3FB): found (309 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:54:58 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:23274B833884E81DF401FD1E3F5B7988): found (309 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:55:05 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:7A6021D4F6FB92E5A64C454C371C6280): found (309 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:55:12 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:967CE6B6024A2666FDDF6F3DA9421C9B): found (310 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:55:19 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:8577D33720C711BE797DDAA346C5FAD0): found (308 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:55:26 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:3FB64BC5AD7608E0B4A74A127C031BC3): found (309 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:55:33 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:A3EB766F0B6BA1C5A28D53954DFA4153): found (309 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:55:40 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:B30DDB7BD4ADF4AF13B5626BAD366024): found (331 ms) by HD01 - SAT.1 HD

log wenn die easymouse der ORF-Karte auf play steht:

Spoiler

• 2015/07/01 06:57:39 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:748732B61B0447F1E3F5AE9C3B10B5F7): found (323 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:57:46 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/922DEFA71FCF072AA3ADF80037D2D9ED4): found (310 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:57:53 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:2BCF9725AF67F58E94821012ED43249F): found (311 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:58:00 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:727D408B8D7C89137F8A8D6531F4809A): found (310 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:58:07 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:C3E6D6138E64B0510BCF990440BDA937): found (311 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:58:11 C86168 r (reader) orf-ice [cryptoworks] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
• 2015/07/01 06:58:11 C86168 r (reader) orf-ice [cryptoworks] Error getting card status.
• 2015/07/01 06:58:11 C86168 r (reader) orf-ice [cryptoworks] card ejected
• 2015/07/01 06:58:12 C86168 r (reader) orf-ice [mouse] card detected
• 2015/07/01 06:58:12 C86168 r (reader) orf-ice [mouse] Buffers readed 0 bytes total time_us 75255
• 2015/07/01 06:58:13 C86168 r (reader) orf-ice [mouse] ATR: 9E F8 80 78 86 C0 00 00 60 E6 60 F8 1E 00 00 FE
• 2015/07/01 06:58:13 C86168 r (reader) orf-ice [mouse] ERROR: Could not read reader->convention
• 2015/07/01 06:58:13 C86168 r (reader) orf-ice [mouse] Error activating card.
• 2015/07/01 06:58:14 C86168 r (reader) orf-ice [mouse] Buffers readed 0 bytes total time_us 75289
• 2015/07/01 06:58:14 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:F2EAC70C5F941A3DAB5135F46C6FA93B): found (315 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:58:15 C86168 r (reader) orf-ice [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
• 2015/07/01 06:58:15 C86168 r (reader) orf-ice [mouse] Buffers readed 0 bytes total time_us 75328
• 2015/07/01 06:58:15 C86168 r (reader) orf-ice [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
• 2015/07/01 06:58:15 C86168 r (reader) orf-ice [mouse] Setting baudrate to 19200 bps
• 2015/07/01 06:58:15 C86168 r (reader) orf-ice [mouse] Calculated work ETU is 31.00 us reader mhz = 600
• 2015/07/01 06:58:15 C86168 r (reader) orf-ice [mouse] Buffers readed 0 bytes total time_us 75351
• 2015/07/01 06:58:15 C86168 r (reader) orf-ice [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2015/07/01 06:58:16 C86168 r (reader) orf-ice [mouse] Hist. Bytes: TÄ
• 2015/07/01 06:58:16 C86168 r (reader) orf-ice [mouse] detect irdeto card
• 2015/07/01 06:58:16 C86168 r (reader) orf-ice [mouse] WARNING: ACS57 card can require the CamKey from config
• 2015/07/01 06:58:16 C86168 r (reader) orf-ice [mouse] caid: 0648, acs: 0.05, country code: AUT
• 2015/07/01 06:58:16 C86168 r (reader) orf-ice [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
• 2015/07/01 06:58:16 C86168 r (reader) orf-ice [mouse] You have a bad Cam Key set
• 2015/07/01 06:58:16 C86168 r (reader) orf-ice [mouse] card detected
• 2015/07/01 06:58:16 C86168 r (reader) orf-ice [mouse] type: CryptoWorks
• 2015/07/01 06:58:16 C86168 r (reader) orf-ice [mouse] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [mouse] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F20
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [mouse] providers: 4 (04,08,0C,10)
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [mouse] found card system cryptoworks
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] chid: 000D, date: 2015/06/24 - 2015/07/24, name: Product 000D
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] chid: 0002, date: 2015/06/28 - 2016/03/04, name: Product 0002
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] chid: 7FF7, date: 2015/06/28 - 2015/07/08, name: Product 7FF7
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] chid: 001D, date: 2015/06/24 - 2015/09/24, name: Product 001D
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] chid: 0031, date: 2015/06/24 - 2015/09/24, name: Product 0031
• 2015/07/01 06:58:17 C86168 r (reader) orf-ice [cryptoworks] ready for requests
• 2015/07/01 06:58:21 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:BC328411012F0BF099BBF0C6DDE7C4E3): found (311 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:58:28 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:E57616D0AF3DD39687F79B61C011387F): found (309 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:58:35 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:7169D32ABF80189E30C3E0DA99524070): found (311 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:58:41 C73540 r (reader) HD01 [nagra] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
• 2015/07/01 06:58:41 C73540 r (reader) HD01 [nagra] Error getting card status.
• 2015/07/01 06:58:41 C73540 r (reader) HD01 [nagra] card ejected
• 2015/07/01 06:58:42 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/9297E3F8833CB12DD16DDD8FE7FA7B907): not found (13 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:58:42 C73540 r (reader) HD01 [mouse] card detected
• 2015/07/01 06:58:42 C73540 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75365
• 2015/07/01 06:58:44 C73540 r (reader) HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2015/07/01 06:58:44 C73540 r (reader) HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2015/07/01 06:58:44 C73540 r (reader) HD01 [mouse] Setting baudrate to 115200 bps
• 2015/07/01 06:58:44 C73540 r (reader) HD01 [mouse] Calculated work ETU is 8.67 us reader mhz = 369
• 2015/07/01 06:58:44 C73540 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75724
• 2015/07/01 06:58:44 C73540 r (reader) HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
• 2015/07/01 06:58:44 C73540 r (reader) HD01 [mouse] Card responded ok for ifsd request of 251
• 2015/07/01 06:58:45 C73540 r (reader) HD01 [mouse] detect native nagra card
• 2015/07/01 06:58:45 C73540 r (reader) HD01 [mouse] ready for requests
• 2015/07/01 06:58:45 C73540 r (reader) HD01 [mouse] found card system nagra
• 2015/07/01 06:58:45 C73540 r (reader) HD01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/07/01 06:58:45 C73540 r (reader) HD01 [nagra] ROM: D N A S P 1 4 2
• 2015/07/01 06:58:45 C73540 r (reader) HD01 [nagra] REV: R e v G C 6
• 2015/07/01 06:58:45 C73540 r (reader) HD01 [nagra] SER: ############
• 2015/07/01 06:58:45 C73540 r (reader) HD01 [nagra] CAID: 1830
• 2015/07/01 06:58:45 C73540 r (reader) HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
• 2015/07/01 06:58:45 C73540 r (reader) HD01 [nagra] Prv.ID: 00 00 00 00
• 2015/07/01 06:58:46 C73540 r (reader) HD01 [nagra] IRD ID: ############
• 2015/07/01 06:58:46 C73540 r (reader) HD01 [nagra] active to: 2015/08/21 11:59
• 2015/07/01 06:58:46 C73540 r (reader) HD01 [nagra] -----------------------------------------
• 2015/07/01 06:58:46 C73540 r (reader) HD01 [nagra] |id |tier |valid from |valid to |
• 2015/07/01 06:58:46 C73540 r (reader) HD01 [nagra] +----+--------+------------+------------+
• 2015/07/01 06:58:46 C73540 r (reader) HD01 [nagra] |8011|0064 |2011/09/09 |2012/09/09 |
• 2015/07/01 06:58:46 C73540 r (reader) HD01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
• 2015/07/01 06:58:46 C73540 r (reader) HD01 [nagra] |8011|0BEA |2014/01/15 |2016/03/10 |
• 2015/07/01 06:58:46 C73540 r (reader) HD01 [nagra] -----------------------------------------
• 2015/07/01 06:58:50 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:4E807908CD1BF064DCF4085CA2614D53): found (308 ms) by HD01 - SAT.1 HD
• 2015/07/01 06:58:56 C86668 c (ecm) sevi_gigablue (1830&000000/0000/EF74/92:BECA889A4BA2CF5E71ED3AB3B962BBDA): found (310 ms) by HD01 - SAT.1 HD

es kommt immer wieder zu aussetzern!?

oscam.conf

Spoiler

[reader]
label = HD01
protocol = mouse
device = /dev/HD01
caid = 1830
boxkey = A7642F57XXXXX7C
rsakey = BF358B546186XXXXXXXXXXXXXXXXXXXXXXXX24156F9EB64E8168EF09E4D9C5CCA4DD5
ecmwhitelist = 1830:92
detect = cd
mhz = 369
cardmhz = 368
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,3,2,0
auprovid = 003411


[reader]
label = A02
protocol = mouse
device = /dev/A02
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2,0


[reader]
label = orf-ice
protocol = mouse
device = /dev/ORF
services = orf
caid = 0D95
force_irdeto = 1
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2,0

viell. hat ja noch jemand eine idee.... evtl. timeout? was wäre das für ein parameter in der oscam.conf?


DANKE!

 

[pehedima]

AW: jetzt will ich einen weiter mouse betreiben mit einer orf ice.

Das wird ein Spannungsversorgungsproblem sein.

Wie sind jetzt deine Reader angebunden?
Alle am externen aktiven HUB?
Was hängt dort für eine Netzteil dran (Leistungsdaten)?
Welches Netzteil hängt an der Raspel (Leistungsdaten)?

Evtl. mal einen Reader direkt an die Raspel stecken und die anderen beiden über den aktiven HUB.

 

[sevi_at]

AW: jetzt will ich einen weiter mouse betreiben mit einer orf ice.

hy,
an das hab ich auch son gedacht. Wenn meine config so passt (ich hoffe diese passt :_s: ) wird es am hub liegen. Ein reader hängt am Raspi direkt der mault ja nicht, komme ich gerade drauf... das ist nämlich meine A02.
die anderen beiden hängen am Hub vom amazon:

Sie müssen registriert sein, um Links zu sehen.

DANKE!