info smargo

[dragonball74]

Salve a tutti volevo chiedere se per far lavorare uno smargo argolis su raspberry pi 3 model b
bisogna avere un hub alimentato o puo bastare solo lo smargo ed un ultima richiesta se e possibile avere la sua configurazione per card Tivusat
un grazie a chiunque potra darmi qualsiasi aiuto,ciao.

 

[DEB ChatGPT]

Ciao! Per far funzionare lo Smargo su Raspberry Pi 3 Model B, è consigliabile utilizzare un hub USB alimentato. In questo modo si garantisce una corretta alimentazione dello Smargo e si evitano eventuali problemi di instabilità.

Per quanto riguarda la configurazione per la card Tivùsat, ecco i passaggi da seguire:

1. Collegare lo Smargo all'hub USB e l'hub USB al Raspberry Pi 3.
2. Installare il driver FTDI per lo Smargo seguendo le istruzioni del produttore.
3. Installare il software OSCam sul Raspberry Pi 3. È possibile farlo tramite il comando "sudo apt-get install oscam".
4. Creare un file di configurazione per OSCam. Ad esempio, è possibile creare un file chiamato "oscam.conf" nella cartella "/etc/tivusat" e inserire le seguenti righe:

`oscam.conf``

Spoiler

[global]
logfile = /var/log/oscam.log
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 1000
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 150
lb_savepath = /var/log/oscam/stat
lb_auto_timeout = 1000
lb_auto_timeshift = -1

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam

oscam.server

Spoiler

[reader]
label = tivusat
protocol = smartreader
device = /dev/ttyUSB0
caid = 183D
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

```

5. Salvare il file di configurazione e avviare OSCam tramite il comando "sudo oscam -c /etc/tivusat/oscam.conf".
6. Verificare che OSCam stia funzionando correttamente. È possibile farlo tramite l'interfaccia web di OSCam, che si trova all'indirizzo

Sie müssen registriert sein, um Links zu sehen.

.

Spero di esserti stato utile!

 

[dragonball74]

grazie al piu presto possibile lo provo un unica cosa non servono le rsakey nel file di configurazione ??

 

[sodex]

Salve a tutti volevo chiedere se per far lavorare uno smargo argolis su raspberry pi 3 model b
bisogna avere un hub alimentato o puo bastare solo lo smargo ed un ultima richiesta se e possibile avere la sua configurazione per card Tivusat
un grazie a chiunque potra darmi qualsiasi aiuto,ciao.

Spoiler: oscam.server

[reader]
label = Tivusat
description = Tivusat (Nagra)
protocol = smartreader
device = SRv2;Serial:12345678
smargopatch = 1
caid = 183E
rsakey = A92--------------4B5
detect = cd
mhz = 534
cardmhz = 600
group = 1
emmcache = 1,2,2,0

Spoiler: oscam.log

• 2023/03/15 14:38:37 00000000 s (main) System name = Linux
• 2023/03/15 14:38:37 00000000 s (main) Host name = ubuntu_pi
• 2023/03/15 14:38:37 00000000 s (main) Release = 4.15.0-1111-raspi2
• 2023/03/15 14:38:37 00000000 s (main) Version = #118-Ubuntu SMP PREEMPT Thu May 19 15:55:25 UTC 2022
• 2023/03/15 14:38:37 00000000 s (main) Machine = aarch64
• 2023/03/15 14:38:37 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 4138
• 2023/03/15 14:38:37 00000000 s (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
• 2023/03/15 14:38:37 00000000 s (main) signal handling initialized
• 2023/03/15 14:38:37 00000000 s (config) 162 service-id's loaded in 2 ms
• 2023/03/15 14:38:37 00000000 s (net) cs357x: initialized (fd=5, port=13000)
• 2023/03/15 14:38:37 00000000 s (net) cs378x: initialized (fd=6, port=15000)
• 2023/03/15 14:38:37 00000000 s (net) cccam: initialized (fd=7, port=12000)
• 2023/03/15 14:38:37 00000000 s (net) gbox: initialized (fd=8, port=38190)
• 2023/03/15 14:38:37 00000000 s (reader) Tivusat [smartreader] creating thread for device SRv2;Serial:12345678
• 2023/03/15 14:38:37 00000000 s (main) waiting for local card init
• 2023/03/15 14:38:37 017F7725 h (webif) webif: decompressed 200214 bytes back into 511792 bytes
• 2023/03/15 14:38:37 017F7725 h (webif) HTTP Server running. ip=0.0.0.0 port=17001
• 2023/03/15 14:38:37 06B02CC2 r (reader) Tivusat [smartreader] Reader initialized (device=SRv2;Serial:12345678, detect=cd, mhz= AUTO, cardmhz=600)
• 2023/03/15 14:38:38 06B02CC2 r (reader) Tivusat [smartreader] card detected
• 2023/03/15 14:38:42 06B02CC2 r (reader) Tivusat [smartreader] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
• 2023/03/15 14:38:42 06B02CC2 r (reader) Tivusat [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
• 2023/03/15 14:38:44 06B02CC2 r (reader) Tivusat [smartreader] detect nagra tiger card
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [smartreader] type: NAGRA, caid: 183E, IRD ID: ############
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [smartreader] ProviderID: 00 00 54 11
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [smartreader] ready for requests
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [smartreader] found card system nagra
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [nagra] ROM: T I G E R 6 0 1
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [nagra] REV: R e v M 8 7
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [nagra] SER: ############
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [nagra] CAID: 183E
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [nagra] Prv.ID: 00 00 54 11 (sysid)
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [nagra] Activation Date : 01/01/2009
• 2023/03/15 14:38:45 06B02CC2 r (reader) Tivusat [nagra] Expiry Date : 31/12/2099
• 2023/03/15 14:38:46 00000000 s (main) init for all local cards done
• 2023/03/15 14:38:46 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2023/03/15 14:38:46 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2023/03/15 14:38:46 00000000 s (anticasc) anti cascading disabled
• 2023/03/15 14:38:46 00000000 s (gbox) local gbox failed init
• 2023/03/15 14:42:27 31661F1C c (client) encrypted cs378x-client 192.168.178.23 granted (dream, au=auto (1 reader))
• 2023/03/15 14:42:27 31661F1C c (camd35) dream emm-request sent (reader=Tivusat, caid=183E, auprovid=005411)
• 2023/03/15 14:42:27 31661F1C c (ecm) dream (183E@000000/0000/007A/91:675F6517A123B38EE2A59A7B0CF7BE27): found (333 ms) by Tivusat - Canale5 HD (lg)
• 2023/03/15 14:42:36 31661F1C c (ecm) dream (183E@000000/0000/007A/91:F9BA5BA31F65BD0DFE1002904A9CC026): found (327 ms) by Tivusat - Canale5 HD (lg)
• 2023/03/15 14:42:51 31661F1C c (ecm) dream (183E@000000/0000/007A/91:B71C69AE9EF2B0A885504D6B20E00076): found (330 ms) by Tivusat - Canale5 HD (lg)
• 2023/03/15 14:43:06 31661F1C c (ecm) dream (183E@000000/0000/007A/91:F93BC2FA5F5BE50F429334D2C72C13A2): found (329 ms) by Tivusat - Canale5 HD (lg)
• 2023/03/15 14:43:18 06B02CC2 r (reader) Tivusat [nagra] dream emmtype=global, len=142 (hex: 0x8E), cnt=1: written (437 ms)
• 2023/03/15 14:43:21 31661F1C c (ecm) dream (183E@000000/0000/007A/91:4A0AED1D93BA6E559112A625E7DD0519): found (328 ms) by Tivusat - Canale5 HD (lg)
• 2023/03/15 14:43:26 31661F1C c (ecm) dream (183E@000000/0000/0D4E/91:298D540C0DDCB52432DA4D00EC769D9C): found (330 ms) by Tivusat - Rai Movie HD (lg)
• 2023/03/15 14:43:34 31661F1C c (ecm) dream (183E@000000/0000/0D4E/91:0305BF95906A384D8A5439EF747CE189): found (328 ms) by Tivusat - Rai Movie HD (lg)
• 2023/03/15 14:43:44 31661F1C c (ecm) dream (183E@000000/0000/0D4E/91C5450A00759DCE94DD18B480B2DC1D5): found (326 ms) by Tivusat - Rai Movie HD (lg)
• 2023/03/15 14:43:54 31661F1C c (ecm) dream (183E@000000/0000/0D4E/91:8832FE77A97E11F06DC4B593E8BE0E77): found (328 ms) by Tivusat - Rai Movie HD (lg)
• 2023/03/15 14:45:56 31661F1C c (work) user dream reached 120 sec idle limit.

MfG