Hallo ich musste vor kurzem meinen Server neu aufsetzten das leider die CF-Karte kaputt ging.
Nun habe ich seitdem das problem, das immer einer meiner 4 Smartmouse /Easymouse2
nicht erkannt wird.
Dieser Smartmouse /Easymouse 2 funktioniert dafor aber und wurde nur zu erweiterung angeschafft (soll heißen ich habe ihn nur getestete und dann Lief dieser auch nicht mehr)
Am Server läuft:
[TABLE="width: 100%, align: center"]
[TR]
[TD][SIZE=-1]Kernel Version[/SIZE][/TD]
[TD][SIZE=-1]2.6.32-5-686 (SMP)[/SIZE][/TD]
[/TR]
[TR]
[TD][SIZE=-1]Distro Name[/SIZE][/TD]
[TD]
[/SIZE][/TD]
[/TR]
[/TABLE]
IPC 11.5 aktuellsteer stand (07.11.2012) und oscam 7844
Verbunden sind die Reader via eines aktiven usb hub, somit ist strom kein problem.
anbei noch die konfigs:
Er erkennt lediglich:
udev rules habe ich bereits kontrolliert und die stimmen soweit auch:
Wie gesagt anfangs ging alles seit neuinstallation wird er scheinar nicht mehr erkannt.
Ab und an wenn ich mit i resetusb mache wird er danach kurzfristig mal erkannt, und dann auch mal ein anderer wieder nicht.
Wenn mir jemand sagen könnte was ich machen kann, welche logs noch gebraucht werden und wie ich dort ran komme -> ich bin leider ein wenig linux unerfahren (aber es wird besser) ;-)
Habe jetzt mal im BIOS nur USB1 eingestellt jedoch auch das hat nichte geändert, außer das meine wlan tastatur jetzt nicht funkt
/var/log/dmesg:
Hoffe irgendwer kann mir helfen...
glg
Nun habe ich seitdem das problem, das immer einer meiner 4 Smartmouse /Easymouse2
nicht erkannt wird.
Dieser Smartmouse /Easymouse 2 funktioniert dafor aber und wurde nur zu erweiterung angeschafft (soll heißen ich habe ihn nur getestete und dann Lief dieser auch nicht mehr)
Am Server läuft:
[TABLE="width: 100%, align: center"]
[TR]
[TD][SIZE=-1]Kernel Version[/SIZE][/TD]
[TD][SIZE=-1]2.6.32-5-686 (SMP)[/SIZE][/TD]
[/TR]
[TR]
[TD][SIZE=-1]Distro Name[/SIZE][/TD]
[TD]
Du musst angemeldet sein, um Bilder zu sehen.
[SIZE=-1]Debian GNU/Linux 6.0.6 (squeeze)[/SIZE][/TD]
[/TR]
[/TABLE]
IPC 11.5 aktuellsteer stand (07.11.2012) und oscam 7844
Verbunden sind die Reader via eines aktiven usb hub, somit ist strom kein problem.
anbei noch die konfigs:
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7819
# Read more:
[reader]
label = skyall1
description =
enable = 1
protocol = mouse
device = /dev/ABO_SKY_1
device_out_endpoint = 0x 0
key =
password =
pincode = *************
readnano =
services = skyall
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
logport = 0
caid = 1702,1833
boxid = ***********
fix9993 = 0
rsakey =
ins7e =
ins7e11 =
force_irdeto = 0
boxkey = **************
atr =
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 1
mhz = 1000
cardmhz = 600
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
[reader]
label = skyall2
description =
enable = 1
protocol = mouse
device = /dev/ABO_SKY_2
device_out_endpoint = 0x 0
key =
password =
pincode = *************
readnano =
services = skyall
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
logport = 0
caid = 1702,1833
boxid = ***************
fix9993 = 0
rsakey =
ins7e =
ins7e11 =
force_irdeto = 0
boxkey = ***************
atr =
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 1
mhz = 1000
cardmhz = 600
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
[reader]
label = orf1
description =
enable = 1
protocol = mouse
device = /dev/ABO_ORF_1
device_out_endpoint = 0x 0
key =
password =
pincode = none
readnano =
services = orf
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
logport = 0
caid = 0D95
boxid = 12345678
fix9993 = 0
rsakey =
ins7e =
ins7e11 =
force_irdeto = 0
boxkey =
atr =
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 1
mhz = 600
cardmhz = 600
ident = 0D95:000000,000004,000008,00000C,000010
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
[reader]
label = orf2
description =
enable = 1
protocol = mouse
device = /dev/ABO_ORF_2
device_out_endpoint = 0x 0
key =
password =
pincode = none
readnano =
services = orf
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
logport = 0
caid = 0D95
boxid = 12345678
fix9993 = 0
rsakey =
ins7e =
ins7e11 =
force_irdeto = 0
boxkey =
atr =
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 1
mhz = 600
cardmhz = 600
ident = 0D95:000000,000004,000008,00000C,000010
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
# Read more:
Sie müssen registriert sein, um Links zu sehen.
[reader]
label = skyall1
description =
enable = 1
protocol = mouse
device = /dev/ABO_SKY_1
device_out_endpoint = 0x 0
key =
password =
pincode = *************
readnano =
services = skyall
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
logport = 0
caid = 1702,1833
boxid = ***********
fix9993 = 0
rsakey =
ins7e =
ins7e11 =
force_irdeto = 0
boxkey = **************
atr =
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 1
mhz = 1000
cardmhz = 600
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
[reader]
label = skyall2
description =
enable = 1
protocol = mouse
device = /dev/ABO_SKY_2
device_out_endpoint = 0x 0
key =
password =
pincode = *************
readnano =
services = skyall
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
logport = 0
caid = 1702,1833
boxid = ***************
fix9993 = 0
rsakey =
ins7e =
ins7e11 =
force_irdeto = 0
boxkey = ***************
atr =
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 1
mhz = 1000
cardmhz = 600
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
[reader]
label = orf1
description =
enable = 1
protocol = mouse
device = /dev/ABO_ORF_1
device_out_endpoint = 0x 0
key =
password =
pincode = none
readnano =
services = orf
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
logport = 0
caid = 0D95
boxid = 12345678
fix9993 = 0
rsakey =
ins7e =
ins7e11 =
force_irdeto = 0
boxkey =
atr =
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 1
mhz = 600
cardmhz = 600
ident = 0D95:000000,000004,000008,00000C,000010
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
[reader]
label = orf2
description =
enable = 1
protocol = mouse
device = /dev/ABO_ORF_2
device_out_endpoint = 0x 0
key =
password =
pincode = none
readnano =
services = orf
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
logport = 0
caid = 0D95
boxid = 12345678
fix9993 = 0
rsakey =
ins7e =
ins7e11 =
force_irdeto = 0
boxkey =
atr =
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 1
mhz = 600
cardmhz = 600
ident = 0D95:000000,000004,000008,00000C,000010
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
Er erkennt lediglich:
ls -l /dev/ttyUSB*
crw-rw---- 1 root dialout 188, 0 7. Nov 16:41 /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 1 7. Nov 16:42 /dev/ttyUSB1
crw-rw---- 1 root dialout 188, 2 7. Nov 16:55 /dev/ttyUSB2
lrwxrwxrwx 1 root root 7 7. Nov 16:41 ABO_ORF_1 -> ttyUSB1
lrwxrwxrwx 1 root root 7 7. Nov 16:41 ABO_ORF_2 -> ttyUSB0
lrwxrwxrwx 1 root root 7 7. Nov 16:41 ABO_SKY_1 -> ttyUSB2
crw-rw---- 1 root dialout 188, 0 7. Nov 16:41 /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 1 7. Nov 16:42 /dev/ttyUSB1
crw-rw---- 1 root dialout 188, 2 7. Nov 16:55 /dev/ttyUSB2
lrwxrwxrwx 1 root root 7 7. Nov 16:41 ABO_ORF_1 -> ttyUSB1
lrwxrwxrwx 1 root root 7 7. Nov 16:41 ABO_ORF_2 -> ttyUSB0
lrwxrwxrwx 1 root root 7 7. Nov 16:41 ABO_SKY_1 -> ttyUSB2
udev rules habe ich bereits kontrolliert und die stimmen soweit auch:
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A900KX84", SYMLINK+="ABO_SKY_1"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="AH01B3UP", SYMLINK+="ABO_SKY_2"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A900eYdr", SYMLINK+="ABO_ORF_1"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="AH01B2YP", SYMLINK+="ABO_ORF_2"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="AH01B3UP", SYMLINK+="ABO_SKY_2"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A900eYdr", SYMLINK+="ABO_ORF_1"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="AH01B2YP", SYMLINK+="ABO_ORF_2"
Wie gesagt anfangs ging alles seit neuinstallation wird er scheinar nicht mehr erkannt.
Ab und an wenn ich mit i resetusb mache wird er danach kurzfristig mal erkannt, und dann auch mal ein anderer wieder nicht.
Wenn mir jemand sagen könnte was ich machen kann, welche logs noch gebraucht werden und wie ich dort ran komme -> ich bin leider ein wenig linux unerfahren (aber es wird besser) ;-)
Habe jetzt mal im BIOS nur USB1 eingestellt jedoch auch das hat nichte geändert, außer das meine wlan tastatur jetzt nicht funkt
/var/log/dmesg:
[16:41:50 07.11.2012] Initializing cgroup subsys cpuset
[16:41:50 07.11.2012] Initializing cgroup subsys cpu
[16:41:50 07.11.2012] Linux version 2.6.32-5-686 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 09:49:36 UTC 2012
[16:41:50 07.11.2012] KERNEL supported cpus:
[16:41:50 07.11.2012] Intel GenuineIntel
[16:41:50 07.11.2012] AMD AuthenticAMD
[16:41:50 07.11.2012] NSC Geode by NSC
[16:41:50 07.11.2012] Cyrix CyrixInstead
[16:41:50 07.11.2012] Centaur CentaurHauls
[16:41:50 07.11.2012] Transmeta GenuineTMx86
[16:41:50 07.11.2012] Transmeta TransmetaCPU
[16:41:50 07.11.2012] UMC UMC UMC UMC
[16:41:50 07.11.2012] BIOS-provided physical RAM map:
[16:41:50 07.11.2012] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[16:41:50 07.11.2012] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[16:41:50 07.11.2012] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[16:41:50 07.11.2012] BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
[16:41:50 07.11.2012] BIOS-e820: 000000000eff0000 - 000000000eff3000 (ACPI NVS)
[16:41:50 07.11.2012] BIOS-e820: 000000000eff3000 - 000000000f000000 (ACPI data)
[16:41:50 07.11.2012] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[16:41:50 07.11.2012] DMI 2.2 present.
[16:41:50 07.11.2012] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[16:41:50 07.11.2012] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[16:41:50 07.11.2012] last_pfn = 0xeff0 max_arch_pfn = 0x100000
[16:41:50 07.11.2012] MTRR default type: uncachable
[16:41:50 07.11.2012] MTRR fixed ranges enabled:
[16:41:50 07.11.2012] 00000-9FFFF write-back
[16:41:50 07.11.2012] A0000-BFFFF uncachable
[16:41:50 07.11.2012] C0000-CEFFF write-protect
[16:41:50 07.11.2012] CF000-FFFFF uncachable
[16:41:50 07.11.2012] MTRR variable ranges enabled:
[16:41:50 07.11.2012] 0 base 000000000 mask FF0000000 write-back
[16:41:50 07.11.2012] 1 base 00F000000 mask FFF000000 uncachable
[16:41:50 07.11.2012] 2 base 0E4000000 mask FFC000000 write-combining
[16:41:50 07.11.2012] 3 base 0E8000000 mask FFF000000 write-combining
[16:41:50 07.11.2012] 4 disabled
[16:41:50 07.11.2012] 5 disabled
[16:41:50 07.11.2012] 6 disabled
[16:41:50 07.11.2012] 7 disabled
[16:41:50 07.11.2012] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[16:41:50 07.11.2012] initial memory mapped : 0 - 01800000
[16:41:50 07.11.2012] init_memory_mapping: 0000000000000000-000000000eff0000
[16:41:50 07.11.2012] 0000000000 - 0000400000 page 4k
[16:41:50 07.11.2012] 0000400000 - 000ec00000 page 2M
[16:41:50 07.11.2012] 000ec00000 - 000eff0000 page 4k
[16:41:50 07.11.2012] kernel direct mapping tables up to eff0000 @ 10000-16000
[16:41:50 07.11.2012] RAMDISK: 0abe4000 - 0b433fd4
[16:41:50 07.11.2012] ACPI: RSDP 000f6690 00014 (v00 CLE266)
[16:41:50 07.11.2012] ACPI: RSDT 0eff3040 00028 (v01 CLE266 AWRDACPI 42302E31 AWRD 00000000)
[16:41:50 07.11.2012] ACPI: FACP 0eff30c0 00074 (v01 CLE266 AWRDACPI 42302E31 AWRD 00000000)
[16:41:50 07.11.2012] ACPI: DSDT 0eff3180 03DF8 (v01 CLE266 AWRDACPI 00001000 MSFT 0100000E)
[16:41:50 07.11.2012] ACPI: FACS 0eff0000 00040
[16:41:50 07.11.2012] 0MB HIGHMEM available.
[16:41:50 07.11.2012] 239MB LOWMEM available.
[16:41:50 07.11.2012] mapped low ram: 0 - 0eff0000
[16:41:50 07.11.2012] low ram: 0 - 0eff0000
[16:41:50 07.11.2012] node 0 low ram: 00000000 - 0eff0000
[16:41:50 07.11.2012] node 0 bootmap 00012000 - 00013e00
[16:41:50 07.11.2012] (9 early reservations) ==> bootmem [0000000000 - 000eff0000]
[16:41:50 07.11.2012] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[16:41:50 07.11.2012] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[16:41:50 07.11.2012] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[16:41:50 07.11.2012] #3 [0001000000 - 00014ccd0c] TEXT DATA BSS ==> [0001000000 - 00014ccd0c]
[16:41:50 07.11.2012] #4 [000abe4000 - 000b433fd4] RAMDISK ==> [000abe4000 - 000b433fd4]
[16:41:50 07.11.2012] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[16:41:50 07.11.2012] #6 [00014cd000 - 00014d308a] BRK ==> [00014cd000 - 00014d308a]
[16:41:50 07.11.2012] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[16:41:50 07.11.2012] #8 [0000012000 - 0000014000] BOOTMAP ==> [0000012000 - 0000014000]
[16:41:50 07.11.2012] Zone PFN ranges:
[16:41:50 07.11.2012] DMA 0x00000010 -> 0x00001000
[16:41:50 07.11.2012] Normal 0x00001000 -> 0x0000eff0
[16:41:50 07.11.2012] HighMem 0x0000eff0 -> 0x0000eff0
[16:41:50 07.11.2012] Movable zone start PFN for each node
[16:41:50 07.11.2012] early_node_map[2] active PFN ranges
[16:41:50 07.11.2012] 0: 0x00000010 -> 0x0000009f
[16:41:50 07.11.2012] 0: 0x00000100 -> 0x0000eff0
[16:41:50 07.11.2012] On node 0 totalpages: 61311
[16:41:50 07.11.2012] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5200
[16:41:50 07.11.2012] DMA zone: 32 pages used for memmap
[16:41:50 07.11.2012] DMA zone: 0 pages reserved
[16:41:50 07.11.2012] DMA zone: 3951 pages, LIFO batch:0
[16:41:50 07.11.2012] Normal zone: 448 pages used for memmap
[16:41:50 07.11.2012] Normal zone: 56880 pages, LIFO batch:15
[16:41:50 07.11.2012] Using APIC driver default
[16:41:50 07.11.2012] ACPI: PM-Timer IO Port: 0x4008
[16:41:50 07.11.2012] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[16:41:50 07.11.2012] No local APIC present or hardware disabled
[16:41:50 07.11.2012] APIC: disable apic facility
[16:41:50 07.11.2012] nr_irqs_gsi: 16
[16:41:50 07.11.2012] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[16:41:50 07.11.2012] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[16:41:50 07.11.2012] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[16:41:50 07.11.2012] Allocating PCI resources starting at f000000 (gap: f000000:f0ff0000)
[16:41:50 07.11.2012] Booting paravirtualized kernel on bare hardware
[16:41:50 07.11.2012] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[16:41:50 07.11.2012] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016 u4194304
[16:41:50 07.11.2012] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[16:41:50 07.11.2012] pcpu-alloc: [0] 0
[16:41:50 07.11.2012] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60831
[16:41:50 07.11.2012] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=04865907-b821-443f-ae07-d5c978baa15c ro quiet
[16:41:50 07.11.2012] PID hash table entries: 1024 (order: 0, 4096 bytes)
[16:41:50 07.11.2012] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[16:41:50 07.11.2012] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[16:41:50 07.11.2012] Enabling fast FPU save and restore... done.
[16:41:50 07.11.2012] Enabling unmasked SIMD FPU exception support... done.
[16:41:50 07.11.2012] Initializing CPU#0
[16:41:50 07.11.2012] Initializing HighMem for node 0 (00000000:00000000)
[16:41:50 07.11.2012] Memory: 229284k/245696k available (2506k kernel code, 15676k reserved, 1326k data, 380k init, 0k highmem)
[16:41:50 07.11.2012] virtual kernel memory layout:
[16:41:50 07.11.2012] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[16:41:50 07.11.2012] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[16:41:50 07.11.2012] vmalloc : 0xcf7f0000 - 0xff3fe000 ( 764 MB)
[16:41:50 07.11.2012] lowmem : 0xc0000000 - 0xceff0000 ( 239 MB)
[16:41:50 07.11.2012] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[16:41:50 07.11.2012] .data : 0xc1272b9b - 0xc13be4c4 (1326 kB)
[16:41:50 07.11.2012] .text : 0xc1000000 - 0xc1272b9b (2506 kB)
[16:41:50 07.11.2012] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[16:41:50 07.11.2012] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[16:41:50 07.11.2012] Hierarchical RCU implementation.
[16:41:50 07.11.2012] NR_IRQS:1280
[16:41:50 07.11.2012] Console: colour VGA+ 80x25
[16:41:50 07.11.2012] console [tty0] enabled
[16:41:50 07.11.2012] Fast TSC calibration using PIT
[16:41:50 07.11.2012] Detected 1000.408 MHz processor.
[16:41:50 07.11.2012] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.81 BogoMIPS (lpj=4001632)
[16:41:50 07.11.2012] Security Framework initialized
[16:41:50 07.11.2012] SELinux: Disabled at boot.
[16:41:50 07.11.2012] Mount-cache hash table entries: 512
[16:41:50 07.11.2012] Initializing cgroup subsys ns
[16:41:50 07.11.2012] Initializing cgroup subsys cpuacct
[16:41:50 07.11.2012] Initializing cgroup subsys devices
[16:41:50 07.11.2012] Initializing cgroup subsys freezer
[16:41:50 07.11.2012] Initializing cgroup subsys net_cls
[16:41:50 07.11.2012] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[16:41:50 07.11.2012] CPU: L2 Cache: 64K (32 bytes/line)
[16:41:50 07.11.2012] Performance Events:
[16:41:50 07.11.2012] Checking 'hlt' instruction... OK.
[16:41:50 07.11.2012] SMP alternatives: switching to UP code
[16:41:50 07.11.2012] Freeing SMP alternatives: 13k freed
[16:41:50 07.11.2012] ACPI: Core revision 20090903
[16:41:50 07.11.2012] ACPI: setting ELCR to 0200 (from 9a20)
[16:41:50 07.11.2012] Enabling APIC mode: Flat. Using 0 I/O APICs
[16:41:50 07.11.2012] weird, boot CPU (#0) not listed by the BIOS.
[16:41:50 07.11.2012] SMP motherboard not detected.
[16:41:50 07.11.2012] Local APIC not detected. Using dummy APIC emulation.
[16:41:50 07.11.2012] SMP disabled
[16:41:50 07.11.2012] Brought up 1 CPUs
[16:41:50 07.11.2012] Total of 1 processors activated (2000.81 BogoMIPS).
[16:41:50 07.11.2012] CPU0 attaching NULL sched-domain.
[16:41:50 07.11.2012] devtmpfs: initialized
[16:41:50 07.11.2012] regulator: core version 0.5
[16:41:50 07.11.2012] NET: Registered protocol family 16
[16:41:50 07.11.2012] ACPI: bus type pci registered
[16:41:50 07.11.2012] PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=2
[16:41:50 07.11.2012] PCI: Using configuration type 1 for base access
[16:41:50 07.11.2012] bio: create slab at 0
[16:41:50 07.11.2012] ACPI: EC: Look up EC in DSDT
[16:41:50 07.11.2012] ACPI: Interpreter enabled
[16:41:50 07.11.2012] ACPI: (supports S0 S1 S4 S5)
[16:41:50 07.11.2012] ACPI: Using PIC for interrupt routing
[16:41:50 07.11.2012] ACPI: No dock devices found.
[16:41:50 07.11.2012] ACPI: PCI Root Bridge [PCI0] (0000:00)
[16:41:50 07.11.2012] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe4000000-0xe7ffffff]
[16:41:50 07.11.2012] pci 0000:00:01.0: supports D1
[16:41:50 07.11.2012] pci 0000:00:09.0: reg 10 32bit mmio: [0xee000000-0xee000fff]
[16:41:50 07.11.2012] pci 0000:00:09.0: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[16:41:50 07.11.2012] pci 0000:00:09.0: PME# disabled
[16:41:50 07.11.2012] pci 0000:00:10.0: reg 20 io port: [0xe400-0xe41f]
[16:41:50 07.11.2012] pci 0000:00:10.0: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[16:41:50 07.11.2012] pci 0000:00:10.0: PME# disabled
[16:41:50 07.11.2012] pci 0000:00:10.3: reg 10 32bit mmio: [0xee005000-0xee0050ff]
[16:41:50 07.11.2012] pci 0000:00:10.3: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[16:41:50 07.11.2012] pci 0000:00:10.3: PME# disabled
[16:41:50 07.11.2012] HPET not enabled in BIOS. You might try hpet=force boot option
[16:41:50 07.11.2012] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
[16:41:50 07.11.2012] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
[16:41:50 07.11.2012] pci 0000:00:11.1: reg 20 io port: [0xe700-0xe70f]
[16:41:50 07.11.2012] pci 0000:00:11.5: reg 10 io port: [0xe800-0xe8ff]
[16:41:50 07.11.2012] pci 0000:00:11.5: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:12.0: reg 10 io port: [0xe900-0xe9ff]
[16:41:50 07.11.2012] pci 0000:00:12.0: reg 14 32bit mmio: [0xee006000-0xee0060ff]
[16:41:50 07.11.2012] pci 0000:00:12.0: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[16:41:50 07.11.2012] pci 0000:00:12.0: PME# disabled
[16:41:50 07.11.2012] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xebffffff]
[16:41:50 07.11.2012] pci 0000:01:00.0: reg 14 32bit mmio: [0xec000000-0xecffffff]
[16:41:50 07.11.2012] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[16:41:50 07.11.2012] pci 0000:01:00.0: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff]
[16:41:50 07.11.2012] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xebffffff]
[16:41:50 07.11.2012] pci_bus 0000:00: on NUMA node 0
[16:41:50 07.11.2012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[16:41:50 07.11.2012] ACPI Warning for \_SB_.PCI0._PRT: Return Package type mismatch at index 2 - found [NULL Object Descriptor], expected Integer/Reference (20090903/nspredef-1012)
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *15
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 *12)
[16:41:50 07.11.2012] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[16:41:50 07.11.2012] vgaarb: loaded
[16:41:50 07.11.2012] PCI: Using ACPI for IRQ routing
[16:41:50 07.11.2012] Switching to clocksource tsc
[16:41:50 07.11.2012] pnp: PnP ACPI init
[16:41:50 07.11.2012] ACPI: bus type pnp registered
[16:41:50 07.11.2012] pnp: PnP ACPI: found 12 devices
[16:41:50 07.11.2012] ACPI: ACPI bus type pnp unregistered
[16:41:50 07.11.2012] PnPBIOS: Disabled by ACPI PNP
[16:41:50 07.11.2012] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xeff0000-0xeffffff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0x100000-0xefeffff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[16:41:50 07.11.2012] system 00:02: ioport range 0x4000-0x407f has been reserved
[16:41:50 07.11.2012] system 00:02: ioport range 0x5000-0x500f has been reserved
[16:41:50 07.11.2012] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[16:41:50 07.11.2012] system 00:03: ioport range 0x294-0x297 has been reserved
[16:41:50 07.11.2012] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[16:41:50 07.11.2012] pci 0000:00:01.0: IO window: disabled
[16:41:50 07.11.2012] pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff
[16:41:50 07.11.2012] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xebffffff
[16:41:50 07.11.2012] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:02
[16:41:50 07.11.2012] pci 0000:00:09.0: IO window: 0x001000-0x0010ff
[16:41:50 07.11.2012] pci 0000:00:09.0: IO window: 0x001400-0x0014ff
[16:41:50 07.11.2012] pci 0000:00:09.0: PREFETCH window: 0x10000000-0x13ffffff
[16:41:50 07.11.2012] pci 0000:00:09.0: MEM window: 0x14000000-0x17ffffff
[16:41:50 07.11.2012] pci 0000:00:01.0: setting latency timer to 64
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[16:41:50 07.11.2012] PCI: setting IRQ 11 as level-triggered
[16:41:50 07.11.2012] pci 0000:00:09.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16:41:50 07.11.2012] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[16:41:50 07.11.2012] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[16:41:50 07.11.2012] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff]
[16:41:50 07.11.2012] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xebffffff]
[16:41:50 07.11.2012] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[16:41:50 07.11.2012] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[16:41:50 07.11.2012] pci_bus 0000:02: resource 2 pref mem [0x10000000-0x13ffffff]
[16:41:50 07.11.2012] pci_bus 0000:02: resource 3 mem: [0x14000000-0x17ffffff]
[16:41:50 07.11.2012] NET: Registered protocol family 2
[16:41:50 07.11.2012] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[16:41:50 07.11.2012] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[16:41:50 07.11.2012] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[16:41:50 07.11.2012] TCP: Hash tables configured (established 8192 bind 8192)
[16:41:50 07.11.2012] TCP reno registered
[16:41:50 07.11.2012] NET: Registered protocol family 1
[16:41:50 07.11.2012] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[16:41:50 07.11.2012] pci 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16:41:50 07.11.2012] pci 0000:00:10.0: VIA VLink IRQ fixup, from 15 to 11
[16:41:50 07.11.2012] pci 0000:00:10.0: PCI INT A disabled
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
[16:41:50 07.11.2012] PCI: setting IRQ 12 as level-triggered
[16:41:50 07.11.2012] pci 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[16:41:50 07.11.2012] pci 0000:00:10.3: PCI INT D disabled
[16:41:50 07.11.2012] pci 0000:01:00.0: Boot video device
[16:41:50 07.11.2012] Unpacking initramfs...
[16:41:51 07.11.2012] Freeing initrd memory: 8511k freed
[16:41:51 07.11.2012] audit: initializing netlink socket (disabled)
[16:41:51 07.11.2012] type=2000 audit(1352302910.304:1): initialized
[16:41:51 07.11.2012] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[16:41:51 07.11.2012] VFS: Disk quotas dquot_6.5.2
[16:41:51 07.11.2012] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[16:41:51 07.11.2012] msgmni has been set to 465
[16:41:51 07.11.2012] alg: No test for stdrng (krng)
[16:41:51 07.11.2012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[16:41:51 07.11.2012] io scheduler noop registered
[16:41:51 07.11.2012] io scheduler anticipatory registered
[16:41:51 07.11.2012] io scheduler deadline registered
[16:41:51 07.11.2012] io scheduler cfq registered (default)
[16:41:51 07.11.2012] isapnp: Scanning for PnP cards...
[16:41:51 07.11.2012] isapnp: No Plug & Play device found
[16:41:51 07.11.2012] Linux agpgart interface v0.103
[16:41:51 07.11.2012] agpgart: Detected VIA CLE266 chipset
[16:41:51 07.11.2012] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe4000000
[16:41:51 07.11.2012] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[16:41:51 07.11.2012] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[16:41:51 07.11.2012] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[16:41:51 07.11.2012] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[16:41:51 07.11.2012] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[16:41:51 07.11.2012] PNP: No PS/2 controller found. Probing ports directly.
[16:41:51 07.11.2012] serio: i8042 KBD port at 0x60,0x64 irq 1
[16:41:51 07.11.2012] mice: PS/2 mouse device common for all mice
[16:41:51 07.11.2012] rtc_cmos 00:05: RTC can wake from S4
[16:41:51 07.11.2012] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[16:41:51 07.11.2012] rtc0: alarms up to one year, y3k, 242 bytes nvram
[16:41:51 07.11.2012] cpuidle: using governor ladder
[16:41:51 07.11.2012] cpuidle: using governor menu
[16:41:51 07.11.2012] No iBFT detected.
[16:41:51 07.11.2012] TCP cubic registered
[16:41:51 07.11.2012] NET: Registered protocol family 10
[16:41:51 07.11.2012] Mobile IPv6
[16:41:51 07.11.2012] NET: Registered protocol family 17
[16:41:51 07.11.2012] Using IPI No-Shortcut mode
[16:41:51 07.11.2012] PM: Resume from disk failed.
[16:41:51 07.11.2012] registered taskstats version 1
[16:41:51 07.11.2012] rtc_cmos 00:05: setting system clock to 2012-11-07 15:41:51 UTC (1352302911)
[16:41:51 07.11.2012] Initalizing network drop monitor service
[16:41:51 07.11.2012] Freeing unused kernel memory: 380k freed
[16:41:51 07.11.2012] Write protecting the kernel text: 2508k
[16:41:51 07.11.2012] Write protecting the kernel read-only data: 920k
[16:41:52 07.11.2012] udev[46]: starting version 164
[16:41:52 07.11.2012] SCSI subsystem initialized
[16:41:52 07.11.2012] usbcore: registered new interface driver usbfs
[16:41:52 07.11.2012] usbcore: registered new interface driver hub
[16:41:52 07.11.2012] usbcore: registered new device driver usb
[16:41:52 07.11.2012] libata version 3.00 loaded.
[16:41:52 07.11.2012] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[16:41:52 07.11.2012] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[16:41:52 07.11.2012] ehci_hcd 0000:00:10.3: EHCI Host Controller
[16:41:52 07.11.2012] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[16:41:52 07.11.2012] ehci_hcd 0000:00:10.3: irq 12, io mem 0xee005000
[16:41:52 07.11.2012] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[16:41:52 07.11.2012] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[16:41:52 07.11.2012] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[16:41:52 07.11.2012] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[16:41:52 07.11.2012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[16:41:52 07.11.2012] usb usb1: Product: EHCI Host Controller
[16:41:52 07.11.2012] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[16:41:52 07.11.2012] usb usb1: SerialNumber: 0000:00:10.3
[16:41:52 07.11.2012] usb usb1: configuration #1 chosen from 1 choice
[16:41:52 07.11.2012] hub 1-0:1.0: USB hub found
[16:41:52 07.11.2012] hub 1-0:1.0: 2 ports detected
[16:41:52 07.11.2012] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16:41:52 07.11.2012] via-rhine 0000:00:12.0: VIA VLink IRQ fixup, from 15 to 11
[16:41:52 07.11.2012] eth0: VIA Rhine II at 0x1e900, 00:e0:c5:59:fd:96, IRQ 11.
[16:41:52 07.11.2012] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[16:41:52 07.11.2012] thermal LNXTHERM:01: registered as thermal_zone0
[16:41:52 07.11.2012] ACPI: Thermal Zone [THRM] (50 C)
[16:41:52 07.11.2012] pata_via 0000:00:11.1: version 0.3.4
[16:41:52 07.11.2012] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16:41:52 07.11.2012] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11
[16:41:52 07.11.2012] scsi0 : pata_via
[16:41:52 07.11.2012] scsi1 : pata_via
[16:41:52 07.11.2012] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe700 irq 14
[16:41:52 07.11.2012] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe708 irq 15
[16:41:52 07.11.2012] fan PNP0C0B:00: registered as cooling_device0
[16:41:52 07.11.2012] ACPI: Fan [FAN] (on)
[16:41:52 07.11.2012] uhci_hcd: USB Universal Host Controller Interface driver
[16:41:52 07.11.2012] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16:41:52 07.11.2012] uhci_hcd 0000:00:10.0: UHCI Host Controller
[16:41:52 07.11.2012] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[16:41:52 07.11.2012] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e400
[16:41:52 07.11.2012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[16:41:52 07.11.2012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[16:41:52 07.11.2012] usb usb2: Product: UHCI Host Controller
[16:41:52 07.11.2012] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[16:41:52 07.11.2012] usb usb2: SerialNumber: 0000:00:10.0
[16:41:52 07.11.2012] usb usb2: configuration #1 chosen from 1 choice
[16:41:52 07.11.2012] hub 2-0:1.0: USB hub found
[16:41:52 07.11.2012] hub 2-0:1.0: 2 ports detected
[16:41:53 07.11.2012] ata1.00: CFA: SanDisk SDCFH-004G, HDX 6.03, max UDMA/66
[16:41:53 07.11.2012] ata1.00: 7813120 sectors, multi 1: LBA48
[16:41:53 07.11.2012] ata1.00: limited to UDMA/33 due to 40-wire cable
[16:41:53 07.11.2012] ata1.00: configured for UDMA/33
[16:41:53 07.11.2012] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-00 HDX PQ: 0 ANSI: 5
[16:41:53 07.11.2012] ata2: port disabled. ignoring.
[16:41:53 07.11.2012] sd 0:0:0:0: [sda] 7813120 512-byte logical blocks: (4.00 GB/3.72 GiB)
[16:41:53 07.11.2012] sd 0:0:0:0: [sda] Write Protect is off
[16:41:53 07.11.2012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[16:41:53 07.11.2012] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[16:41:53 07.11.2012] sda: sda1 sda2 < sda5 >
[16:41:53 07.11.2012] sd 0:0:0:0: [sda] Attached SCSI removable disk
[16:41:53 07.11.2012] usb 1-1: new high speed USB device using ehci_hcd and address 2
[16:41:53 07.11.2012] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[16:41:53 07.11.2012] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[16:41:53 07.11.2012] usb 1-1: Product: USB2.0 Hub
[16:41:53 07.11.2012] usb 1-1: configuration #1 chosen from 1 choice
[16:41:53 07.11.2012] hub 1-1:1.0: USB hub found
[16:41:53 07.11.2012] hub 1-1:1.0: 4 ports detected
[16:41:53 07.11.2012] PM: Starting manual resume from disk
[16:41:53 07.11.2012] PM: Resume from partition 8:5
[16:41:53 07.11.2012] PM: Checking hibernation image.
[16:41:53 07.11.2012] PM: Error -22 checking image file
[16:41:53 07.11.2012] PM: Resume from disk failed.
[16:41:53 07.11.2012] kjournald starting. Commit interval 5 seconds
[16:41:53 07.11.2012] EXT3-fs: mounted filesystem with ordered data mode.
[16:41:53 07.11.2012] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[16:41:53 07.11.2012] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001
[16:41:53 07.11.2012] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16:41:53 07.11.2012] usb 1-1.1: Product: FT232R USB UART
[16:41:53 07.11.2012] usb 1-1.1: Manufacturer: FTDI
[16:41:53 07.11.2012] usb 1-1.1: SerialNumber: AH01B2YP
[16:41:53 07.11.2012] usb 1-1.1: configuration #1 chosen from 1 choice
[16:41:53 07.11.2012] usb 1-1.2: new full speed USB device using ehci_hcd and address 4
[16:41:53 07.11.2012] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001
[16:41:53 07.11.2012] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16:41:53 07.11.2012] usb 1-1.2: Product: FT232R USB UART
[16:41:53 07.11.2012] usb 1-1.2: Manufacturer: FTDI
[16:41:53 07.11.2012] usb 1-1.2: SerialNumber: A900eYdr
[16:41:53 07.11.2012] usb 1-1.2: configuration #1 chosen from 1 choice
[16:41:53 07.11.2012] usb 1-1.3: new full speed USB device using ehci_hcd and address 5
[16:41:54 07.11.2012] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
[16:41:54 07.11.2012] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16:41:54 07.11.2012] usb 1-1.3: Product: FT232R USB UART
[16:41:54 07.11.2012] usb 1-1.3: Manufacturer: FTDI
[16:41:54 07.11.2012] usb 1-1.3: SerialNumber: A900KX84
[16:41:54 07.11.2012] usb 1-1.3: configuration #1 chosen from 1 choice
[16:41:54 07.11.2012] usb 1-1.4: new high speed USB device using ehci_hcd and address 6
[16:41:54 07.11.2012] udev[286]: starting version 164
[16:41:54 07.11.2012] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0608
[16:41:54 07.11.2012] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[16:41:54 07.11.2012] usb 1-1.4: Product: USB2.0 Hub
[16:41:54 07.11.2012] usb 1-1.4: configuration #1 chosen from 1 choice
[16:41:54 07.11.2012] hub 1-1.4:1.0: USB hub found
[16:41:54 07.11.2012] hub 1-1.4:1.0: 4 ports detected
[16:41:54 07.11.2012] usb 1-1.4.4: new full speed USB device using ehci_hcd and address 7
[16:41:54 07.11.2012] usb 1-1.4.4: New USB device found, idVendor=0403, idProduct=6001
[16:41:54 07.11.2012] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16:41:54 07.11.2012] usb 1-1.4.4: Product: FT232R USB UART
[16:41:54 07.11.2012] usb 1-1.4.4: Manufacturer: FTDI
[16:41:54 07.11.2012] usb 1-1.4.4: SerialNumber: AH01B3UP
[16:41:54 07.11.2012] usb 1-1.4.4: configuration #1 chosen from 1 choice
[16:41:54 07.11.2012] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[16:41:55 07.11.2012] Marking TSC unstable due to TSC halts in idle
[16:41:55 07.11.2012] processor LNXCPU:00: registered as cooling_device1
[16:41:55 07.11.2012] Switching to clocksource acpi_pm
[16:41:55 07.11.2012] input: PC Speaker as /devices/platform/pcspkr/input/input0
[16:41:55 07.11.2012] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[16:41:55 07.11.2012] ACPI: Power Button [PWRB]
[16:41:55 07.11.2012] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[16:41:55 07.11.2012] ACPI: Sleep Button [SLPB]
[16:41:55 07.11.2012] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[16:41:55 07.11.2012] ACPI: Power Button [PWRF]
[16:41:55 07.11.2012] usbcore: registered new interface driver usbserial
[16:41:55 07.11.2012] USB Serial support registered for generic
[16:41:55 07.11.2012] usbcore: registered new interface driver usbserial_generic
[16:41:55 07.11.2012] usbserial: USB Serial Driver core
[16:41:55 07.11.2012] USB Serial support registered for FTDI USB Serial Device
[16:41:55 07.11.2012] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[16:41:55 07.11.2012] usb 1-1.1: Detected FT232RL
[16:41:55 07.11.2012] usb 1-1.1: Number of endpoints 2
[16:41:55 07.11.2012] usb 1-1.1: Endpoint 1 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.1: Endpoint 2 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.1: Setting MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[16:41:55 07.11.2012] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[16:41:55 07.11.2012] usb 1-1.2: Detected FT232RL
[16:41:55 07.11.2012] usb 1-1.2: Number of endpoints 2
[16:41:55 07.11.2012] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.2: Setting MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
[16:41:55 07.11.2012] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[16:41:55 07.11.2012] usb 1-1.3: Detected FT232RL
[16:41:55 07.11.2012] usb 1-1.3: Number of endpoints 2
[16:41:55 07.11.2012] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.3: Setting MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB2
[16:41:55 07.11.2012] ftdi_sio 1-1.4.4:1.0: FTDI USB Serial Device converter detected
[16:41:55 07.11.2012] usb 1-1.4.4: Detected FT232RL
[16:41:55 07.11.2012] usb 1-1.4.4: Number of endpoints 2
[16:41:55 07.11.2012] usb 1-1.4.4: Endpoint 1 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.4.4: Endpoint 2 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.4.4: Setting MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.4.4: FTDI USB Serial Device converter now attached to ttyUSB3
[16:41:55 07.11.2012] usbcore: registered new interface driver ftdi_sio
[16:41:55 07.11.2012] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[16:41:55 07.11.2012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[16:41:55 07.11.2012] NET: Registered protocol family 23
[16:41:55 07.11.2012] parport_pc 00:0a: reported by Plug and Play ACPI
[16:41:55 07.11.2012] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[16:41:55 07.11.2012] yenta_cardbus 0000:00:09.0: CardBus bridge found [0000:0000]
[16:41:55 07.11.2012] yenta_cardbus 0000:00:09.0: Using CSCINT to route CSC interrupts to PCI
[16:41:55 07.11.2012] yenta_cardbus 0000:00:09.0: Routing CardBus interrupts to PCI
[16:41:55 07.11.2012] yenta_cardbus 0000:00:09.0: TI: mfunc 0x00001002, devctl 0x66
[16:41:55 07.11.2012] Error: Driver 'pcspkr' is already registered, aborting...
[16:41:56 07.11.2012] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0078, PCI irq 11
[16:41:56 07.11.2012] yenta_cardbus 0000:00:09.0: Socket status: 30000007
[16:41:56 07.11.2012] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[16:41:56 07.11.2012] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[16:41:56 07.11.2012] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[16:41:56 07.11.2012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[16:41:56 07.11.2012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[16:41:56 07.11.2012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[16:41:56 07.11.2012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[16:41:56 07.11.2012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[16:41:56 07.11.2012] usb 1-1.4.4: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[16:41:56 07.11.2012] ftdi_sio ttyUSB3: FTDI USB Serial Device converter now disconnected from ttyUSB3
[16:41:56 07.11.2012] ftdi_sio 1-1.4.4:1.0: device disconnected
[16:41:57 07.11.2012] Adding 210936k swap on /dev/sda5. Priority:-1 extents:1 across:210936k
[16:41:57 07.11.2012] EXT3 FS on sda1, internal journal
[16:41:57 07.11.2012] loop: module loaded
[16:41:58 07.11.2012] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[16:41:50 07.11.2012] Initializing cgroup subsys cpu
[16:41:50 07.11.2012] Linux version 2.6.32-5-686 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 09:49:36 UTC 2012
[16:41:50 07.11.2012] KERNEL supported cpus:
[16:41:50 07.11.2012] Intel GenuineIntel
[16:41:50 07.11.2012] AMD AuthenticAMD
[16:41:50 07.11.2012] NSC Geode by NSC
[16:41:50 07.11.2012] Cyrix CyrixInstead
[16:41:50 07.11.2012] Centaur CentaurHauls
[16:41:50 07.11.2012] Transmeta GenuineTMx86
[16:41:50 07.11.2012] Transmeta TransmetaCPU
[16:41:50 07.11.2012] UMC UMC UMC UMC
[16:41:50 07.11.2012] BIOS-provided physical RAM map:
[16:41:50 07.11.2012] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[16:41:50 07.11.2012] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[16:41:50 07.11.2012] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[16:41:50 07.11.2012] BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
[16:41:50 07.11.2012] BIOS-e820: 000000000eff0000 - 000000000eff3000 (ACPI NVS)
[16:41:50 07.11.2012] BIOS-e820: 000000000eff3000 - 000000000f000000 (ACPI data)
[16:41:50 07.11.2012] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[16:41:50 07.11.2012] DMI 2.2 present.
[16:41:50 07.11.2012] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[16:41:50 07.11.2012] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[16:41:50 07.11.2012] last_pfn = 0xeff0 max_arch_pfn = 0x100000
[16:41:50 07.11.2012] MTRR default type: uncachable
[16:41:50 07.11.2012] MTRR fixed ranges enabled:
[16:41:50 07.11.2012] 00000-9FFFF write-back
[16:41:50 07.11.2012] A0000-BFFFF uncachable
[16:41:50 07.11.2012] C0000-CEFFF write-protect
[16:41:50 07.11.2012] CF000-FFFFF uncachable
[16:41:50 07.11.2012] MTRR variable ranges enabled:
[16:41:50 07.11.2012] 0 base 000000000 mask FF0000000 write-back
[16:41:50 07.11.2012] 1 base 00F000000 mask FFF000000 uncachable
[16:41:50 07.11.2012] 2 base 0E4000000 mask FFC000000 write-combining
[16:41:50 07.11.2012] 3 base 0E8000000 mask FFF000000 write-combining
[16:41:50 07.11.2012] 4 disabled
[16:41:50 07.11.2012] 5 disabled
[16:41:50 07.11.2012] 6 disabled
[16:41:50 07.11.2012] 7 disabled
[16:41:50 07.11.2012] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[16:41:50 07.11.2012] initial memory mapped : 0 - 01800000
[16:41:50 07.11.2012] init_memory_mapping: 0000000000000000-000000000eff0000
[16:41:50 07.11.2012] 0000000000 - 0000400000 page 4k
[16:41:50 07.11.2012] 0000400000 - 000ec00000 page 2M
[16:41:50 07.11.2012] 000ec00000 - 000eff0000 page 4k
[16:41:50 07.11.2012] kernel direct mapping tables up to eff0000 @ 10000-16000
[16:41:50 07.11.2012] RAMDISK: 0abe4000 - 0b433fd4
[16:41:50 07.11.2012] ACPI: RSDP 000f6690 00014 (v00 CLE266)
[16:41:50 07.11.2012] ACPI: RSDT 0eff3040 00028 (v01 CLE266 AWRDACPI 42302E31 AWRD 00000000)
[16:41:50 07.11.2012] ACPI: FACP 0eff30c0 00074 (v01 CLE266 AWRDACPI 42302E31 AWRD 00000000)
[16:41:50 07.11.2012] ACPI: DSDT 0eff3180 03DF8 (v01 CLE266 AWRDACPI 00001000 MSFT 0100000E)
[16:41:50 07.11.2012] ACPI: FACS 0eff0000 00040
[16:41:50 07.11.2012] 0MB HIGHMEM available.
[16:41:50 07.11.2012] 239MB LOWMEM available.
[16:41:50 07.11.2012] mapped low ram: 0 - 0eff0000
[16:41:50 07.11.2012] low ram: 0 - 0eff0000
[16:41:50 07.11.2012] node 0 low ram: 00000000 - 0eff0000
[16:41:50 07.11.2012] node 0 bootmap 00012000 - 00013e00
[16:41:50 07.11.2012] (9 early reservations) ==> bootmem [0000000000 - 000eff0000]
[16:41:50 07.11.2012] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[16:41:50 07.11.2012] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[16:41:50 07.11.2012] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[16:41:50 07.11.2012] #3 [0001000000 - 00014ccd0c] TEXT DATA BSS ==> [0001000000 - 00014ccd0c]
[16:41:50 07.11.2012] #4 [000abe4000 - 000b433fd4] RAMDISK ==> [000abe4000 - 000b433fd4]
[16:41:50 07.11.2012] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[16:41:50 07.11.2012] #6 [00014cd000 - 00014d308a] BRK ==> [00014cd000 - 00014d308a]
[16:41:50 07.11.2012] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[16:41:50 07.11.2012] #8 [0000012000 - 0000014000] BOOTMAP ==> [0000012000 - 0000014000]
[16:41:50 07.11.2012] Zone PFN ranges:
[16:41:50 07.11.2012] DMA 0x00000010 -> 0x00001000
[16:41:50 07.11.2012] Normal 0x00001000 -> 0x0000eff0
[16:41:50 07.11.2012] HighMem 0x0000eff0 -> 0x0000eff0
[16:41:50 07.11.2012] Movable zone start PFN for each node
[16:41:50 07.11.2012] early_node_map[2] active PFN ranges
[16:41:50 07.11.2012] 0: 0x00000010 -> 0x0000009f
[16:41:50 07.11.2012] 0: 0x00000100 -> 0x0000eff0
[16:41:50 07.11.2012] On node 0 totalpages: 61311
[16:41:50 07.11.2012] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5200
[16:41:50 07.11.2012] DMA zone: 32 pages used for memmap
[16:41:50 07.11.2012] DMA zone: 0 pages reserved
[16:41:50 07.11.2012] DMA zone: 3951 pages, LIFO batch:0
[16:41:50 07.11.2012] Normal zone: 448 pages used for memmap
[16:41:50 07.11.2012] Normal zone: 56880 pages, LIFO batch:15
[16:41:50 07.11.2012] Using APIC driver default
[16:41:50 07.11.2012] ACPI: PM-Timer IO Port: 0x4008
[16:41:50 07.11.2012] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[16:41:50 07.11.2012] No local APIC present or hardware disabled
[16:41:50 07.11.2012] APIC: disable apic facility
[16:41:50 07.11.2012] nr_irqs_gsi: 16
[16:41:50 07.11.2012] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[16:41:50 07.11.2012] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[16:41:50 07.11.2012] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[16:41:50 07.11.2012] Allocating PCI resources starting at f000000 (gap: f000000:f0ff0000)
[16:41:50 07.11.2012] Booting paravirtualized kernel on bare hardware
[16:41:50 07.11.2012] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[16:41:50 07.11.2012] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016 u4194304
[16:41:50 07.11.2012] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[16:41:50 07.11.2012] pcpu-alloc: [0] 0
[16:41:50 07.11.2012] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60831
[16:41:50 07.11.2012] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=04865907-b821-443f-ae07-d5c978baa15c ro quiet
[16:41:50 07.11.2012] PID hash table entries: 1024 (order: 0, 4096 bytes)
[16:41:50 07.11.2012] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[16:41:50 07.11.2012] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[16:41:50 07.11.2012] Enabling fast FPU save and restore... done.
[16:41:50 07.11.2012] Enabling unmasked SIMD FPU exception support... done.
[16:41:50 07.11.2012] Initializing CPU#0
[16:41:50 07.11.2012] Initializing HighMem for node 0 (00000000:00000000)
[16:41:50 07.11.2012] Memory: 229284k/245696k available (2506k kernel code, 15676k reserved, 1326k data, 380k init, 0k highmem)
[16:41:50 07.11.2012] virtual kernel memory layout:
[16:41:50 07.11.2012] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[16:41:50 07.11.2012] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[16:41:50 07.11.2012] vmalloc : 0xcf7f0000 - 0xff3fe000 ( 764 MB)
[16:41:50 07.11.2012] lowmem : 0xc0000000 - 0xceff0000 ( 239 MB)
[16:41:50 07.11.2012] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[16:41:50 07.11.2012] .data : 0xc1272b9b - 0xc13be4c4 (1326 kB)
[16:41:50 07.11.2012] .text : 0xc1000000 - 0xc1272b9b (2506 kB)
[16:41:50 07.11.2012] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[16:41:50 07.11.2012] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[16:41:50 07.11.2012] Hierarchical RCU implementation.
[16:41:50 07.11.2012] NR_IRQS:1280
[16:41:50 07.11.2012] Console: colour VGA+ 80x25
[16:41:50 07.11.2012] console [tty0] enabled
[16:41:50 07.11.2012] Fast TSC calibration using PIT
[16:41:50 07.11.2012] Detected 1000.408 MHz processor.
[16:41:50 07.11.2012] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.81 BogoMIPS (lpj=4001632)
[16:41:50 07.11.2012] Security Framework initialized
[16:41:50 07.11.2012] SELinux: Disabled at boot.
[16:41:50 07.11.2012] Mount-cache hash table entries: 512
[16:41:50 07.11.2012] Initializing cgroup subsys ns
[16:41:50 07.11.2012] Initializing cgroup subsys cpuacct
[16:41:50 07.11.2012] Initializing cgroup subsys devices
[16:41:50 07.11.2012] Initializing cgroup subsys freezer
[16:41:50 07.11.2012] Initializing cgroup subsys net_cls
[16:41:50 07.11.2012] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[16:41:50 07.11.2012] CPU: L2 Cache: 64K (32 bytes/line)
[16:41:50 07.11.2012] Performance Events:
[16:41:50 07.11.2012] Checking 'hlt' instruction... OK.
[16:41:50 07.11.2012] SMP alternatives: switching to UP code
[16:41:50 07.11.2012] Freeing SMP alternatives: 13k freed
[16:41:50 07.11.2012] ACPI: Core revision 20090903
[16:41:50 07.11.2012] ACPI: setting ELCR to 0200 (from 9a20)
[16:41:50 07.11.2012] Enabling APIC mode: Flat. Using 0 I/O APICs
[16:41:50 07.11.2012] weird, boot CPU (#0) not listed by the BIOS.
[16:41:50 07.11.2012] SMP motherboard not detected.
[16:41:50 07.11.2012] Local APIC not detected. Using dummy APIC emulation.
[16:41:50 07.11.2012] SMP disabled
[16:41:50 07.11.2012] Brought up 1 CPUs
[16:41:50 07.11.2012] Total of 1 processors activated (2000.81 BogoMIPS).
[16:41:50 07.11.2012] CPU0 attaching NULL sched-domain.
[16:41:50 07.11.2012] devtmpfs: initialized
[16:41:50 07.11.2012] regulator: core version 0.5
[16:41:50 07.11.2012] NET: Registered protocol family 16
[16:41:50 07.11.2012] ACPI: bus type pci registered
[16:41:50 07.11.2012] PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=2
[16:41:50 07.11.2012] PCI: Using configuration type 1 for base access
[16:41:50 07.11.2012] bio: create slab at 0
[16:41:50 07.11.2012] ACPI: EC: Look up EC in DSDT
[16:41:50 07.11.2012] ACPI: Interpreter enabled
[16:41:50 07.11.2012] ACPI: (supports S0 S1 S4 S5)
[16:41:50 07.11.2012] ACPI: Using PIC for interrupt routing
[16:41:50 07.11.2012] ACPI: No dock devices found.
[16:41:50 07.11.2012] ACPI: PCI Root Bridge [PCI0] (0000:00)
[16:41:50 07.11.2012] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe4000000-0xe7ffffff]
[16:41:50 07.11.2012] pci 0000:00:01.0: supports D1
[16:41:50 07.11.2012] pci 0000:00:09.0: reg 10 32bit mmio: [0xee000000-0xee000fff]
[16:41:50 07.11.2012] pci 0000:00:09.0: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[16:41:50 07.11.2012] pci 0000:00:09.0: PME# disabled
[16:41:50 07.11.2012] pci 0000:00:10.0: reg 20 io port: [0xe400-0xe41f]
[16:41:50 07.11.2012] pci 0000:00:10.0: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[16:41:50 07.11.2012] pci 0000:00:10.0: PME# disabled
[16:41:50 07.11.2012] pci 0000:00:10.3: reg 10 32bit mmio: [0xee005000-0xee0050ff]
[16:41:50 07.11.2012] pci 0000:00:10.3: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[16:41:50 07.11.2012] pci 0000:00:10.3: PME# disabled
[16:41:50 07.11.2012] HPET not enabled in BIOS. You might try hpet=force boot option
[16:41:50 07.11.2012] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
[16:41:50 07.11.2012] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
[16:41:50 07.11.2012] pci 0000:00:11.1: reg 20 io port: [0xe700-0xe70f]
[16:41:50 07.11.2012] pci 0000:00:11.5: reg 10 io port: [0xe800-0xe8ff]
[16:41:50 07.11.2012] pci 0000:00:11.5: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:12.0: reg 10 io port: [0xe900-0xe9ff]
[16:41:50 07.11.2012] pci 0000:00:12.0: reg 14 32bit mmio: [0xee006000-0xee0060ff]
[16:41:50 07.11.2012] pci 0000:00:12.0: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[16:41:50 07.11.2012] pci 0000:00:12.0: PME# disabled
[16:41:50 07.11.2012] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xebffffff]
[16:41:50 07.11.2012] pci 0000:01:00.0: reg 14 32bit mmio: [0xec000000-0xecffffff]
[16:41:50 07.11.2012] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[16:41:50 07.11.2012] pci 0000:01:00.0: supports D1 D2
[16:41:50 07.11.2012] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff]
[16:41:50 07.11.2012] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xebffffff]
[16:41:50 07.11.2012] pci_bus 0000:00: on NUMA node 0
[16:41:50 07.11.2012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[16:41:50 07.11.2012] ACPI Warning for \_SB_.PCI0._PRT: Return Package type mismatch at index 2 - found [NULL Object Descriptor], expected Integer/Reference (20090903/nspredef-1012)
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *15
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 *12)
[16:41:50 07.11.2012] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[16:41:50 07.11.2012] vgaarb: loaded
[16:41:50 07.11.2012] PCI: Using ACPI for IRQ routing
[16:41:50 07.11.2012] Switching to clocksource tsc
[16:41:50 07.11.2012] pnp: PnP ACPI init
[16:41:50 07.11.2012] ACPI: bus type pnp registered
[16:41:50 07.11.2012] pnp: PnP ACPI: found 12 devices
[16:41:50 07.11.2012] ACPI: ACPI bus type pnp unregistered
[16:41:50 07.11.2012] PnPBIOS: Disabled by ACPI PNP
[16:41:50 07.11.2012] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xeff0000-0xeffffff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0x100000-0xefeffff could not be reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[16:41:50 07.11.2012] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[16:41:50 07.11.2012] system 00:02: ioport range 0x4000-0x407f has been reserved
[16:41:50 07.11.2012] system 00:02: ioport range 0x5000-0x500f has been reserved
[16:41:50 07.11.2012] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[16:41:50 07.11.2012] system 00:03: ioport range 0x294-0x297 has been reserved
[16:41:50 07.11.2012] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[16:41:50 07.11.2012] pci 0000:00:01.0: IO window: disabled
[16:41:50 07.11.2012] pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff
[16:41:50 07.11.2012] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xebffffff
[16:41:50 07.11.2012] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:02
[16:41:50 07.11.2012] pci 0000:00:09.0: IO window: 0x001000-0x0010ff
[16:41:50 07.11.2012] pci 0000:00:09.0: IO window: 0x001400-0x0014ff
[16:41:50 07.11.2012] pci 0000:00:09.0: PREFETCH window: 0x10000000-0x13ffffff
[16:41:50 07.11.2012] pci 0000:00:09.0: MEM window: 0x14000000-0x17ffffff
[16:41:50 07.11.2012] pci 0000:00:01.0: setting latency timer to 64
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[16:41:50 07.11.2012] PCI: setting IRQ 11 as level-triggered
[16:41:50 07.11.2012] pci 0000:00:09.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16:41:50 07.11.2012] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[16:41:50 07.11.2012] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[16:41:50 07.11.2012] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff]
[16:41:50 07.11.2012] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xebffffff]
[16:41:50 07.11.2012] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[16:41:50 07.11.2012] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[16:41:50 07.11.2012] pci_bus 0000:02: resource 2 pref mem [0x10000000-0x13ffffff]
[16:41:50 07.11.2012] pci_bus 0000:02: resource 3 mem: [0x14000000-0x17ffffff]
[16:41:50 07.11.2012] NET: Registered protocol family 2
[16:41:50 07.11.2012] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[16:41:50 07.11.2012] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[16:41:50 07.11.2012] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[16:41:50 07.11.2012] TCP: Hash tables configured (established 8192 bind 8192)
[16:41:50 07.11.2012] TCP reno registered
[16:41:50 07.11.2012] NET: Registered protocol family 1
[16:41:50 07.11.2012] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[16:41:50 07.11.2012] pci 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16:41:50 07.11.2012] pci 0000:00:10.0: VIA VLink IRQ fixup, from 15 to 11
[16:41:50 07.11.2012] pci 0000:00:10.0: PCI INT A disabled
[16:41:50 07.11.2012] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
[16:41:50 07.11.2012] PCI: setting IRQ 12 as level-triggered
[16:41:50 07.11.2012] pci 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[16:41:50 07.11.2012] pci 0000:00:10.3: PCI INT D disabled
[16:41:50 07.11.2012] pci 0000:01:00.0: Boot video device
[16:41:50 07.11.2012] Unpacking initramfs...
[16:41:51 07.11.2012] Freeing initrd memory: 8511k freed
[16:41:51 07.11.2012] audit: initializing netlink socket (disabled)
[16:41:51 07.11.2012] type=2000 audit(1352302910.304:1): initialized
[16:41:51 07.11.2012] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[16:41:51 07.11.2012] VFS: Disk quotas dquot_6.5.2
[16:41:51 07.11.2012] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[16:41:51 07.11.2012] msgmni has been set to 465
[16:41:51 07.11.2012] alg: No test for stdrng (krng)
[16:41:51 07.11.2012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[16:41:51 07.11.2012] io scheduler noop registered
[16:41:51 07.11.2012] io scheduler anticipatory registered
[16:41:51 07.11.2012] io scheduler deadline registered
[16:41:51 07.11.2012] io scheduler cfq registered (default)
[16:41:51 07.11.2012] isapnp: Scanning for PnP cards...
[16:41:51 07.11.2012] isapnp: No Plug & Play device found
[16:41:51 07.11.2012] Linux agpgart interface v0.103
[16:41:51 07.11.2012] agpgart: Detected VIA CLE266 chipset
[16:41:51 07.11.2012] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe4000000
[16:41:51 07.11.2012] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[16:41:51 07.11.2012] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[16:41:51 07.11.2012] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[16:41:51 07.11.2012] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[16:41:51 07.11.2012] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[16:41:51 07.11.2012] PNP: No PS/2 controller found. Probing ports directly.
[16:41:51 07.11.2012] serio: i8042 KBD port at 0x60,0x64 irq 1
[16:41:51 07.11.2012] mice: PS/2 mouse device common for all mice
[16:41:51 07.11.2012] rtc_cmos 00:05: RTC can wake from S4
[16:41:51 07.11.2012] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[16:41:51 07.11.2012] rtc0: alarms up to one year, y3k, 242 bytes nvram
[16:41:51 07.11.2012] cpuidle: using governor ladder
[16:41:51 07.11.2012] cpuidle: using governor menu
[16:41:51 07.11.2012] No iBFT detected.
[16:41:51 07.11.2012] TCP cubic registered
[16:41:51 07.11.2012] NET: Registered protocol family 10
[16:41:51 07.11.2012] Mobile IPv6
[16:41:51 07.11.2012] NET: Registered protocol family 17
[16:41:51 07.11.2012] Using IPI No-Shortcut mode
[16:41:51 07.11.2012] PM: Resume from disk failed.
[16:41:51 07.11.2012] registered taskstats version 1
[16:41:51 07.11.2012] rtc_cmos 00:05: setting system clock to 2012-11-07 15:41:51 UTC (1352302911)
[16:41:51 07.11.2012] Initalizing network drop monitor service
[16:41:51 07.11.2012] Freeing unused kernel memory: 380k freed
[16:41:51 07.11.2012] Write protecting the kernel text: 2508k
[16:41:51 07.11.2012] Write protecting the kernel read-only data: 920k
[16:41:52 07.11.2012] udev[46]: starting version 164
[16:41:52 07.11.2012] SCSI subsystem initialized
[16:41:52 07.11.2012] usbcore: registered new interface driver usbfs
[16:41:52 07.11.2012] usbcore: registered new interface driver hub
[16:41:52 07.11.2012] usbcore: registered new device driver usb
[16:41:52 07.11.2012] libata version 3.00 loaded.
[16:41:52 07.11.2012] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[16:41:52 07.11.2012] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[16:41:52 07.11.2012] ehci_hcd 0000:00:10.3: EHCI Host Controller
[16:41:52 07.11.2012] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[16:41:52 07.11.2012] ehci_hcd 0000:00:10.3: irq 12, io mem 0xee005000
[16:41:52 07.11.2012] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[16:41:52 07.11.2012] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[16:41:52 07.11.2012] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[16:41:52 07.11.2012] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[16:41:52 07.11.2012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[16:41:52 07.11.2012] usb usb1: Product: EHCI Host Controller
[16:41:52 07.11.2012] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[16:41:52 07.11.2012] usb usb1: SerialNumber: 0000:00:10.3
[16:41:52 07.11.2012] usb usb1: configuration #1 chosen from 1 choice
[16:41:52 07.11.2012] hub 1-0:1.0: USB hub found
[16:41:52 07.11.2012] hub 1-0:1.0: 2 ports detected
[16:41:52 07.11.2012] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16:41:52 07.11.2012] via-rhine 0000:00:12.0: VIA VLink IRQ fixup, from 15 to 11
[16:41:52 07.11.2012] eth0: VIA Rhine II at 0x1e900, 00:e0:c5:59:fd:96, IRQ 11.
[16:41:52 07.11.2012] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[16:41:52 07.11.2012] thermal LNXTHERM:01: registered as thermal_zone0
[16:41:52 07.11.2012] ACPI: Thermal Zone [THRM] (50 C)
[16:41:52 07.11.2012] pata_via 0000:00:11.1: version 0.3.4
[16:41:52 07.11.2012] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16:41:52 07.11.2012] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11
[16:41:52 07.11.2012] scsi0 : pata_via
[16:41:52 07.11.2012] scsi1 : pata_via
[16:41:52 07.11.2012] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe700 irq 14
[16:41:52 07.11.2012] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe708 irq 15
[16:41:52 07.11.2012] fan PNP0C0B:00: registered as cooling_device0
[16:41:52 07.11.2012] ACPI: Fan [FAN] (on)
[16:41:52 07.11.2012] uhci_hcd: USB Universal Host Controller Interface driver
[16:41:52 07.11.2012] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16:41:52 07.11.2012] uhci_hcd 0000:00:10.0: UHCI Host Controller
[16:41:52 07.11.2012] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[16:41:52 07.11.2012] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e400
[16:41:52 07.11.2012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[16:41:52 07.11.2012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[16:41:52 07.11.2012] usb usb2: Product: UHCI Host Controller
[16:41:52 07.11.2012] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[16:41:52 07.11.2012] usb usb2: SerialNumber: 0000:00:10.0
[16:41:52 07.11.2012] usb usb2: configuration #1 chosen from 1 choice
[16:41:52 07.11.2012] hub 2-0:1.0: USB hub found
[16:41:52 07.11.2012] hub 2-0:1.0: 2 ports detected
[16:41:53 07.11.2012] ata1.00: CFA: SanDisk SDCFH-004G, HDX 6.03, max UDMA/66
[16:41:53 07.11.2012] ata1.00: 7813120 sectors, multi 1: LBA48
[16:41:53 07.11.2012] ata1.00: limited to UDMA/33 due to 40-wire cable
[16:41:53 07.11.2012] ata1.00: configured for UDMA/33
[16:41:53 07.11.2012] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-00 HDX PQ: 0 ANSI: 5
[16:41:53 07.11.2012] ata2: port disabled. ignoring.
[16:41:53 07.11.2012] sd 0:0:0:0: [sda] 7813120 512-byte logical blocks: (4.00 GB/3.72 GiB)
[16:41:53 07.11.2012] sd 0:0:0:0: [sda] Write Protect is off
[16:41:53 07.11.2012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[16:41:53 07.11.2012] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[16:41:53 07.11.2012] sda: sda1 sda2 < sda5 >
[16:41:53 07.11.2012] sd 0:0:0:0: [sda] Attached SCSI removable disk
[16:41:53 07.11.2012] usb 1-1: new high speed USB device using ehci_hcd and address 2
[16:41:53 07.11.2012] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[16:41:53 07.11.2012] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[16:41:53 07.11.2012] usb 1-1: Product: USB2.0 Hub
[16:41:53 07.11.2012] usb 1-1: configuration #1 chosen from 1 choice
[16:41:53 07.11.2012] hub 1-1:1.0: USB hub found
[16:41:53 07.11.2012] hub 1-1:1.0: 4 ports detected
[16:41:53 07.11.2012] PM: Starting manual resume from disk
[16:41:53 07.11.2012] PM: Resume from partition 8:5
[16:41:53 07.11.2012] PM: Checking hibernation image.
[16:41:53 07.11.2012] PM: Error -22 checking image file
[16:41:53 07.11.2012] PM: Resume from disk failed.
[16:41:53 07.11.2012] kjournald starting. Commit interval 5 seconds
[16:41:53 07.11.2012] EXT3-fs: mounted filesystem with ordered data mode.
[16:41:53 07.11.2012] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[16:41:53 07.11.2012] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001
[16:41:53 07.11.2012] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16:41:53 07.11.2012] usb 1-1.1: Product: FT232R USB UART
[16:41:53 07.11.2012] usb 1-1.1: Manufacturer: FTDI
[16:41:53 07.11.2012] usb 1-1.1: SerialNumber: AH01B2YP
[16:41:53 07.11.2012] usb 1-1.1: configuration #1 chosen from 1 choice
[16:41:53 07.11.2012] usb 1-1.2: new full speed USB device using ehci_hcd and address 4
[16:41:53 07.11.2012] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001
[16:41:53 07.11.2012] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16:41:53 07.11.2012] usb 1-1.2: Product: FT232R USB UART
[16:41:53 07.11.2012] usb 1-1.2: Manufacturer: FTDI
[16:41:53 07.11.2012] usb 1-1.2: SerialNumber: A900eYdr
[16:41:53 07.11.2012] usb 1-1.2: configuration #1 chosen from 1 choice
[16:41:53 07.11.2012] usb 1-1.3: new full speed USB device using ehci_hcd and address 5
[16:41:54 07.11.2012] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
[16:41:54 07.11.2012] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16:41:54 07.11.2012] usb 1-1.3: Product: FT232R USB UART
[16:41:54 07.11.2012] usb 1-1.3: Manufacturer: FTDI
[16:41:54 07.11.2012] usb 1-1.3: SerialNumber: A900KX84
[16:41:54 07.11.2012] usb 1-1.3: configuration #1 chosen from 1 choice
[16:41:54 07.11.2012] usb 1-1.4: new high speed USB device using ehci_hcd and address 6
[16:41:54 07.11.2012] udev[286]: starting version 164
[16:41:54 07.11.2012] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0608
[16:41:54 07.11.2012] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[16:41:54 07.11.2012] usb 1-1.4: Product: USB2.0 Hub
[16:41:54 07.11.2012] usb 1-1.4: configuration #1 chosen from 1 choice
[16:41:54 07.11.2012] hub 1-1.4:1.0: USB hub found
[16:41:54 07.11.2012] hub 1-1.4:1.0: 4 ports detected
[16:41:54 07.11.2012] usb 1-1.4.4: new full speed USB device using ehci_hcd and address 7
[16:41:54 07.11.2012] usb 1-1.4.4: New USB device found, idVendor=0403, idProduct=6001
[16:41:54 07.11.2012] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16:41:54 07.11.2012] usb 1-1.4.4: Product: FT232R USB UART
[16:41:54 07.11.2012] usb 1-1.4.4: Manufacturer: FTDI
[16:41:54 07.11.2012] usb 1-1.4.4: SerialNumber: AH01B3UP
[16:41:54 07.11.2012] usb 1-1.4.4: configuration #1 chosen from 1 choice
[16:41:54 07.11.2012] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[16:41:55 07.11.2012] Marking TSC unstable due to TSC halts in idle
[16:41:55 07.11.2012] processor LNXCPU:00: registered as cooling_device1
[16:41:55 07.11.2012] Switching to clocksource acpi_pm
[16:41:55 07.11.2012] input: PC Speaker as /devices/platform/pcspkr/input/input0
[16:41:55 07.11.2012] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[16:41:55 07.11.2012] ACPI: Power Button [PWRB]
[16:41:55 07.11.2012] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[16:41:55 07.11.2012] ACPI: Sleep Button [SLPB]
[16:41:55 07.11.2012] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[16:41:55 07.11.2012] ACPI: Power Button [PWRF]
[16:41:55 07.11.2012] usbcore: registered new interface driver usbserial
[16:41:55 07.11.2012] USB Serial support registered for generic
[16:41:55 07.11.2012] usbcore: registered new interface driver usbserial_generic
[16:41:55 07.11.2012] usbserial: USB Serial Driver core
[16:41:55 07.11.2012] USB Serial support registered for FTDI USB Serial Device
[16:41:55 07.11.2012] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[16:41:55 07.11.2012] usb 1-1.1: Detected FT232RL
[16:41:55 07.11.2012] usb 1-1.1: Number of endpoints 2
[16:41:55 07.11.2012] usb 1-1.1: Endpoint 1 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.1: Endpoint 2 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.1: Setting MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[16:41:55 07.11.2012] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[16:41:55 07.11.2012] usb 1-1.2: Detected FT232RL
[16:41:55 07.11.2012] usb 1-1.2: Number of endpoints 2
[16:41:55 07.11.2012] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.2: Setting MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
[16:41:55 07.11.2012] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[16:41:55 07.11.2012] usb 1-1.3: Detected FT232RL
[16:41:55 07.11.2012] usb 1-1.3: Number of endpoints 2
[16:41:55 07.11.2012] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.3: Setting MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB2
[16:41:55 07.11.2012] ftdi_sio 1-1.4.4:1.0: FTDI USB Serial Device converter detected
[16:41:55 07.11.2012] usb 1-1.4.4: Detected FT232RL
[16:41:55 07.11.2012] usb 1-1.4.4: Number of endpoints 2
[16:41:55 07.11.2012] usb 1-1.4.4: Endpoint 1 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.4.4: Endpoint 2 MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.4.4: Setting MaxPacketSize 64
[16:41:55 07.11.2012] usb 1-1.4.4: FTDI USB Serial Device converter now attached to ttyUSB3
[16:41:55 07.11.2012] usbcore: registered new interface driver ftdi_sio
[16:41:55 07.11.2012] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[16:41:55 07.11.2012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[16:41:55 07.11.2012] NET: Registered protocol family 23
[16:41:55 07.11.2012] parport_pc 00:0a: reported by Plug and Play ACPI
[16:41:55 07.11.2012] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[16:41:55 07.11.2012] yenta_cardbus 0000:00:09.0: CardBus bridge found [0000:0000]
[16:41:55 07.11.2012] yenta_cardbus 0000:00:09.0: Using CSCINT to route CSC interrupts to PCI
[16:41:55 07.11.2012] yenta_cardbus 0000:00:09.0: Routing CardBus interrupts to PCI
[16:41:55 07.11.2012] yenta_cardbus 0000:00:09.0: TI: mfunc 0x00001002, devctl 0x66
[16:41:55 07.11.2012] Error: Driver 'pcspkr' is already registered, aborting...
[16:41:56 07.11.2012] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0078, PCI irq 11
[16:41:56 07.11.2012] yenta_cardbus 0000:00:09.0: Socket status: 30000007
[16:41:56 07.11.2012] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[16:41:56 07.11.2012] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[16:41:56 07.11.2012] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[16:41:56 07.11.2012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[16:41:56 07.11.2012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[16:41:56 07.11.2012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[16:41:56 07.11.2012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[16:41:56 07.11.2012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[16:41:56 07.11.2012] usb 1-1.4.4: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[16:41:56 07.11.2012] ftdi_sio ttyUSB3: FTDI USB Serial Device converter now disconnected from ttyUSB3
[16:41:56 07.11.2012] ftdi_sio 1-1.4.4:1.0: device disconnected
[16:41:57 07.11.2012] Adding 210936k swap on /dev/sda5. Priority:-1 extents:1 across:210936k
[16:41:57 07.11.2012] EXT3 FS on sda1, internal journal
[16:41:57 07.11.2012] loop: module loaded
[16:41:58 07.11.2012] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Hoffe irgendwer kann mir helfen...
glg
