Igel 4210 - Debian Jessie 8 - Ram Voll

[cambridge1976]

Ich habe folgendes Problem:

Bisher lief mein Igel immer ohne Probleme!

Letzte Woche ging nichts mehr, kein FTP Zugang, kein SSH!

Konnte den Igel nur noch aus machen.

Nach Neustart lief soweit alles, aber der Ram füllt sich ganz langsam, dann die Auslagerungsdatei.

Wenn beides gefüllt ist, geht nichts mehr!

Um 14:56 Uhr - 339,40 Ram belegt
um 15:03 Uhr - 353,81 Ram belegt

So geht es immer weiter.....

Außer ein Update letzte Woche der Pakete habe ich nichts verändert!

Wer kann mir helfen bei der Fehlersuche???

 

[sumsi]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

ist IPC drauf installiert?

wir brauchen mehr Infos über die Hardware und Installation.

 

[cambridge1976]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

[TABLE="class: stripeMe"]
[TR]
[TD]Igel 4210
IPC ist installiert
Kernel Version
VIA C7 Processor 1000MHz[/TD]

[TD]3.16.0-4-686-pae (SMP) i686[/TD]

[/TR]

[TR="class: even"]

[TD]Distributionsname[/TD]

[TD]

Du musst angemeldet sein, um Bilder zu sehen.

Debian GNU/Linux 8.2 (jessie)[/TD]



[/TR]

[TR]

[TD]Betriebszeit[/TD]

[TD]1 Stunden 23 Minuten[/TD]
[/TR]
[/TABLE]

 

[axel]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

Hi,

die Glaskugel ist leider in Reparatur...

Folgende Ausgaben ab Neustart Igel hier posten:

cat /var/log/syslog

und

dmesg

Ein

df-h

wäre auch nicht schlecht.



Gruß

 

[Alex]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

Ist normal, dass sich sowohl SWAP als auch RAM füllen, Linux verhält sich da anders als Windows.
Interessant wäre, was zu dem Zeitpunkt, an dem er nicht mehr regiert, im syslog steht

 

[cambridge1976]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

So auf die schnelle das Syslog:

Spoiler

Grep keyword (return results that contain this keyword)
Should the grep keyword be inverted? (Return results that do NOT contain the keyword) Yes No
Log:

Delete
/var/log/syslog:
Jan 11 13:40:51 Igel4210NEU syslogd (GNU inetutils UNKNOWN): restart
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Initializing cgroup subsys cpuset
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Initializing cgroup subsys cpu
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Initializing cgroup subsys cpuacct
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u2 (2016-01-02)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] e820: BIOS-provided physical RAM map:
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f6dffff] usable
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BIOS-e820: [mem 0x000000003f6e0000-0x000000003f6e2fff] ACPI NVS
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BIOS-e820: [mem 0x000000003f6e3000-0x000000003f6effff] ACPI data
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BIOS-e820: [mem 0x000000003f6f0000-0x000000003f6fffff] reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] NX (Execute Disable) protection: active
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] SMBIOS 2.3 present.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] DMI: VIA Technologies, Inc. CN700-8237/CN700-8237, BIOS 6.00 PG 08/03/2007
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] e820: last_pfn = 0x3f6e0 max_arch_pfn = 0x1000000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] MTRR default type: uncachable
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] MTRR fixed ranges enabled:
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 00000-9FFFF write-back
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] A0000-BFFFF uncachable
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] C0000-CCFFF write-protect
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] CD000-EFFFF uncachable
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] F0000-F7FFF write-through
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] F8000-F8FFF uncachable
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] F9000-FFFFF write-through
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] MTRR variable ranges enabled:
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 0 base 000000000 mask FC0000000 write-back
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 2 base 0E8000000 mask FF8000000 write-combining
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 3 base 03F700000 mask FFFF00000 uncachable
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 4 disabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 5 disabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 6 disabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 7 disabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] init_memory_mapping: [mem 0x36200000-0x363fffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] [mem 0x36200000-0x363fffff] page 2M
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] init_memory_mapping: [mem 0x34000000-0x361fffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] [mem 0x34000000-0x361fffff] page 2M
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] init_memory_mapping: [mem 0x36400000-0x375fdfff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] [mem 0x36400000-0x373fffff] page 2M
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BRK [0x0179d000, 0x0179efff] PGTABLE
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BRK [0x017a0000, 0x017a0fff] PGTABLE
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] RAMDISK: [mem 0x364be000-0x37256fff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] ACPI: Early table checksum verification disabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] ACPI: RSDP 0x00000000000F4FD0 000014 (v00 CN700 )
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] ACPI: RSDT 0x000000003F6E3040 000028 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] ACPI: FACP 0x000000003F6E30C0 000074 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] ACPI: DSDT 0x000000003F6E3180 00454D (v01 CN700 AWRDACPI 00001000 MSFT 0100000E)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] ACPI: FACS 0x000000003F6E0000 000040
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 128MB HIGHMEM available.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] 885MB LOWMEM available.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] mapped low ram: 0 - 375fe000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] low ram: 0 - 375fe000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Zone ranges:
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Normal [mem 0x01000000-0x375fdfff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] HighMem [mem 0x375fe000-0x3f6dffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Movable zone start for each node
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Early memory node ranges
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] node 0: [mem 0x00100000-0x3f6dffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] On node 0 totalpages: 259710
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] free_area_init_node: node 0, pgdat c165d180, node_mem_map f5cce020
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] DMA zone: 32 pages used for memmap
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] DMA zone: 0 pages reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Normal zone: 1740 pages used for memmap
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Normal zone: 222718 pages, LIFO batch:31
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] HighMem zone: 258 pages used for memmap
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] HighMem zone: 32994 pages, LIFO batch:7
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Using APIC driver default
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] No local APIC present or hardware disabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] APIC: disable apic facility
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] APIC: switched to apic NOOP
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] nr_irqs_gsi: 16
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] e820: [mem 0x3f700000-0xfffeffff] available for PCI devices
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Booting paravirtualized kernel on bare hardware
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] PERCPU: Embedded 14 pages/cpu @f75ea000 s34752 r0 d22592 u57344
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] pcpu-alloc: [0] 0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257938
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=a8119f21-aa96-4bc7-80f7-a7a42419bec8 ro quiet
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Initializing CPU#0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Initializing HighMem for node 0 (000375fe:0003f6e0)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Memory: 1008036K/1038840K available (4608K kernel code, 522K rwdata, 1452K rodata, 656K init, 460K bss, 30804K reserved, 131976K highmem)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] virtual kernel memory layout:
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] pkmap : 0xff600000 - 0xff800000 (2048 kB)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] .init : 0xc1671000 - 0xc1715000 ( 656 kB)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] .data : 0xc148040c - 0xc166fb40 (1981 kB)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] .text : 0xc1000000 - 0xc148040c (4609 kB)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Hierarchical RCU implementation.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] Console: colour VGA+ 80x25
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] console [tty0] enabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] tsc: Fast TSC calibration using PIT
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.000000] tsc: Detected 797.973 MHz processor
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.004039] Calibrating delay loop (skipped), value calculated using timer frequency.. 1595.94 BogoMIPS (lpj=3191892)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.004054] pid_max: default: 32768 minimum: 301
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.004111] ACPI: Core revision 20140424
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.023096] ACPI: All ACPI Tables successfully acquired
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.023118] ACPI: setting ELCR to 0200 (from 0e20)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.023207] Security Framework initialized
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.023251] AppArmor: AppArmor disabled by boot time parameter
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.023259] Yama: disabled by default; enable with sysctl kernel.yama.*
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.023320] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.023332] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.024382] Initializing cgroup subsys memory
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.024409] Initializing cgroup subsys devices
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.024449] Initializing cgroup subsys freezer
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.024467] Initializing cgroup subsys net_cls
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.024495] Initializing cgroup subsys blkio
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.024519] Initializing cgroup subsys perf_event
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.024532] Initializing cgroup subsys net_prio
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.024629] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.024629] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.024629] tlb_flushall_shift: -1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.056789] Freeing SMP alternatives memory: 20K (c1715000 - c171a000)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.062218] ftrace: allocating 20810 entries in 41 pages
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.092275] smpboot: weird, boot CPU (#0) not listed by the BIOS
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.092287] smpboot: SMP motherboard not detected
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.092295] smpboot: Local APIC not detected. Using dummy APIC emulation.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.092301] smpboot: SMP disabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.092404] Performance Events: no PMU driver, software events only.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.100667] x86: Booted up 1 node, 1 CPUs
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.100684] smpboot: Total of 1 processors activated (1595.94 BogoMIPS)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.100857] NMI watchdog: disabled (cpu0): hardware events not enabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.101213] devtmpfs: initialized
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.102434] PM: Registering ACPI NVS region [mem 0x3f6e0000-0x3f6e2fff] (12288 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.109918] pinctrl core: initialized pinctrl subsystem
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.110278] NET: Registered protocol family 16
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.110886] cpuidle: using governor ladder
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.110902] cpuidle: using governor menu
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.111178] ACPI: bus type PCI registered
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.111190] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.119902] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.119916] PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.119923] PCI: Using configuration type 1 for base access
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.125765] ACPI: Added _OSI(Module Device)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.125779] ACPI: Added _OSI(Processor Device)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.125788] ACPI: Added _OSI(3.0 _SCP Extensions)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.125796] ACPI: Added _OSI(Processor Aggregator Device)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.142128] ACPI: Interpreter enabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.142191] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.142213] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.142261] ACPI: (supports S0 S1 S4 S5)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.142270] ACPI: Using PIC for interrupt routing
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.142376] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.163880] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.163911] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.163937] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.164512] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.165351] PCI host bridge to bus 0000:00
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.165367] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.165380] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.165393] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.165407] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.165420] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.165434] pci_bus 0000:00: root bus resource [mem 0x3f700000-0xffefffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.165490] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.165521] pci 0000:00:00.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.166005] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.166433] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.166854] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.167271] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.167699] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.168164] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.168255] pci 0000:00:01.0: supports D1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.168655] pci 0000:00:0f.0: [1106:0571] type 00 class 0x01018a
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.168737] pci 0000:00:0f.0: reg 0x20: [io 0xeb00-0xeb0f]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.168777] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.168790] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.168802] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.168814] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.169250] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.169329] pci 0000:00:10.0: reg 0x20: [io 0xec00-0xec1f]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.169402] pci 0000:00:10.0: supports D1 D2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.169414] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.169610] pci 0000:00:10.0: System wakeup disabled by ACPI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.169881] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.169960] pci 0000:00:10.1: reg 0x20: [io 0xe800-0xe81f]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.170032] pci 0000:00:10.1: supports D1 D2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.170045] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.170240] pci 0000:00:10.1: System wakeup disabled by ACPI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.170499] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.170578] pci 0000:00:10.2: reg 0x20: [io 0xe900-0xe91f]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.170650] pci 0000:00:10.2: supports D1 D2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.170663] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.170852] pci 0000:00:10.2: System wakeup disabled by ACPI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.171119] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.171197] pci 0000:00:10.3: reg 0x20: [io 0xea00-0xea1f]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.171270] pci 0000:00:10.3: supports D1 D2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.171282] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.171471] pci 0000:00:10.3: System wakeup disabled by ACPI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.171736] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.171773] pci 0000:00:10.4: reg 0x10: [mem 0xf6000000-0xf60000ff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.171889] pci 0000:00:10.4: supports D1 D2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.171901] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.172123] pci 0000:00:10.4: System wakeup disabled by ACPI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.172397] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.172497] HPET not enabled in BIOS. You might try hpet=force boot option
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.172931] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.172967] pci 0000:00:11.5: reg 0x10: [io 0xe000-0xe0ff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.173086] pci 0000:00:11.5: supports D1 D2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.173274] pci 0000:00:11.5: System wakeup disabled by ACPI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.173543] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.173579] pci 0000:00:12.0: reg 0x10: [io 0xe400-0xe4ff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.173604] pci 0000:00:12.0: reg 0x14: [mem 0xf6001000-0xf60010ff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.173711] pci 0000:00:12.0: supports D1 D2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.173723] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.173913] pci 0000:00:12.0: System wakeup disabled by ACPI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.174356] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.174392] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf3ffffff pref]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.174415] pci 0000:01:00.0: reg 0x14: [mem 0xf4000000-0xf4ffffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.174475] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.174530] pci 0000:01:00.0: supports D1 D2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.174793] pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.174813] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.174829] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.174852] pci_bus 0000:00: on NUMA node 0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.176693] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.177093] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.177512] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.177850] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.178149] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.178434] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.178718] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.179010] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.181752] vgaarb: setting as boot device: PCI:0000:01:00.0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.181767] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.181774] vgaarb: loaded
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.181783] vgaarb: bridge control possible 0000:01:00.0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.182120] PCI: Using ACPI for IRQ routing
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.182134] PCI: pci_cache_line_size set to 64 bytes
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.182249] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.182260] e820: reserve RAM buffer [mem 0x3f6e0000-0x3fffffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.183163] Switched to clocksource pit
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.209924] pnp: PnP ACPI init
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.210002] ACPI: bus type PNP registered
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.210915] system 00:00: [mem 0x000cda00-0x000cffff] has been reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.210933] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.210948] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.210963] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.210978] system 00:00: [mem 0x3f6e0000-0x3f6fffff] could not be reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.210994] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.211008] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.211024] system 00:00: [mem 0x00100000-0x3f6dffff] could not be reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.211039] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.211054] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.211072] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.211381] system 00:01: [io 0x0400-0x047f] could not be reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.211396] system 00:01: [io 0x0500-0x050f] has been reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.211411] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.213634] system 00:02: [io 0x04d0-0x04d1] has been reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.213652] system 00:02: [io 0x0294-0x0297] has been reserved
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.213668] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.213873] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.214946] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.215798] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.217098] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.217470] pnp: PnP ACPI: found 7 devices
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.217478] ACPI: bus type PNP unregistered
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.217502] PnPBIOS: Disabled by ACPI PNP
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262242] Switched to clocksource acpi_pm
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262347] pci 0000:01:00.0: BAR 6: assigned [mem 0xf5000000-0xf500ffff pref]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262363] pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262383] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262400] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262422] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262435] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262448] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262461] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262474] pci_bus 0000:00: resource 8 [mem 0x3f700000-0xffefffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262489] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262503] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf3ffffff pref]
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.262609] NET: Registered protocol family 2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.263714] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.263848] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.264053] TCP: Hash tables configured (established 8192 bind 8192)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.264251] TCP: reno registered
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.264264] UDP hash table entries: 512 (order: 2, 16384 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.264309] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.264577] NET: Registered protocol family 1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.264693] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.266117] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.266128] PCI: setting IRQ 11 as level-triggered
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.267819] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.267827] PCI: setting IRQ 10 as level-triggered
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.267847] pci 0000:00:10.2: VIA VLink IRQ fixup, from 5 to 10
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.268392] pci 0000:00:10.3: VIA VLink IRQ fixup, from 5 to 10
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.269715] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.269970] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.270012] pci 0000:01:00.0: Video device with shadowed ROM
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.270021] PCI: CLS 32 bytes, default 64
Jan 11 13:40:51 Igel4210NEU vmunix: [ 0.270278] Unpacking initramfs...
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.072707] Freeing initrd memory: 13924K (f64be000 - f7257000)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.073049] microcode: no support for this CPU vendor
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.074560] futex hash table entries: 256 (order: 2, 16384 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.074673] audit: initializing netlink subsys (disabled)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.074747] audit: type=2000 audit(1452516039.070:1): initialized
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.076183] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.076270] zbud: loaded
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.076561] VFS: Disk quotas dquot_6.5.2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.076616] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.076853] msgmni has been set to 1738
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.078295] alg: No test for stdrng (krng)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.078419] bounce: pool size: 64 pages
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.078491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.078672] io scheduler noop registered
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.078686] io scheduler deadline registered
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.078853] io scheduler cfq registered (default)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.079434] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.079540] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.079800] GHES: HEST is not enabled!
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.079916] isapnp: Scanning for PnP cards...
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.434455] isapnp: No Plug & Play device found
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.434845] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.455487] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.476196] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.477674] Linux agpgart interface v0.103
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.478363] agpgart: Detected VIA VT3314 chipset
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.489124] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.489687] i8042: PNP: No PS/2 controller found. Probing ports directly.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.490350] serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.490380] serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.491114] mousedev: PS/2 mouse device common for all mice
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.491356] rtc_cmos 00:03: RTC can wake from S4
Jan 11 13:40:51 Igel4210NEU dbus[475]: [system] Successfully activated service 'org.freedesktop.systemd1'
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.491802] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.491861] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.491943] ledtrig-cpu: registered to indicate activity on CPUs
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.493825] TCP: cubic registered
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.493884] NET: Registered protocol family 10
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.494811] mip6: Mobile IPv6
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.494834] NET: Registered protocol family 17
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.494864] mpls_gso: MPLS GSO support
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.494888] mce: Unable to init device /dev/mcelog (rc: -5)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.495160] Using IPI No-Shortcut mode
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.495799] registered taskstats version 1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.497049] rtc_cmos 00:03: setting system clock to 2016-01-11 12:40:40 UTC (1452516040)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.497347] PM: Hibernation image not present or could not be loaded.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.498897] Freeing unused kernel memory: 656K (c1671000 - c1715000)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.499120] Write protecting the kernel text: 4612k
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.499363] Write protecting the kernel read-only data: 1456k
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.499370] NX-protecting the kernel data: 3580k
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.567347] systemd-udevd[54]: starting version 215
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.573141] random: systemd-udevd urandom read with 10 bits of entropy available
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.746708] SCSI subsystem initialized
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.751844] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.751862] via_rhine: Broken BIOS detected, avoid_D3 enabled
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.771825] ACPI: bus type USB registered
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.771990] usbcore: registered new interface driver usbfs
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.777060] usbcore: registered new interface driver hub
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.781067] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1e400, 00:e0:c5:4e:7a:69, IRQ 11
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.781871] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.783012] usbcore: registered new device driver usb
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.787246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.791256] ehci-pci: EHCI PCI platform driver
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.802265] ehci-pci 0000:00:10.4: EHCI Host Controller
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.802308] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.802452] ehci-pci 0000:00:10.4: irq 10, io mem 0xf6000000
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.805547] uhci_hcd: USB Universal Host Controller Interface driver
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.812129] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.812439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.812452] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.812464] usb usb1: Product: EHCI Host Controller
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.812476] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.812487] usb usb1: SerialNumber: 0000:00:10.4
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.813230] hub 1-0:1.0: USB hub found
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.813266] hub 1-0:1.0: 8 ports detected
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.815616] uhci_hcd 0000:00:10.0: UHCI Host Controller
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.815657] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.815682] uhci_hcd 0000:00:10.0: detected 2 ports
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.815735] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000ec00
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.816002] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.816100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.816113] usb usb2: Product: UHCI Host Controller
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.816124] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.816135] usb usb2: SerialNumber: 0000:00:10.0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.817159] hub 2-0:1.0: USB hub found
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.818113] hub 2-0:1.0: 2 ports detected
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.819094] uhci_hcd 0000:00:10.1: UHCI Host Controller
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.819125] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.819147] uhci_hcd 0000:00:10.1: detected 2 ports
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.819197] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e800
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.820483] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.820501] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.820513] usb usb3: Product: UHCI Host Controller
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.820524] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.820535] usb usb3: SerialNumber: 0000:00:10.1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.823466] libata version 3.00 loaded.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.825183] hub 3-0:1.0: USB hub found
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.826531] hub 3-0:1.0: 2 ports detected
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.829669] pata_via 0000:00:0f.0: version 0.3.4
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.829962] pata_via 0000:00:0f.0: VIA VLink IRQ fixup, from 255 to 11
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.853180] scsi0 : pata_via
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.862391] scsi1 : pata_via
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.862772] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xeb00 irq 14
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.862784] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xeb08 irq 15
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.863310] uhci_hcd 0000:00:10.2: UHCI Host Controller
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.863348] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.863372] uhci_hcd 0000:00:10.2: detected 2 ports
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.863422] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000e900
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.863981] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.863995] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.864007] usb usb4: Product: UHCI Host Controller
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.864087] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.864098] usb usb4: SerialNumber: 0000:00:10.2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.864890] hub 4-0:1.0: USB hub found
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.864923] hub 4-0:1.0: 2 ports detected
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.865768] uhci_hcd 0000:00:10.3: UHCI Host Controller
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.865798] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.865819] uhci_hcd 0000:00:10.3: detected 2 ports
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.865869] uhci_hcd 0000:00:10.3: irq 10, io base 0x0000ea00
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.866123] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.866136] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.866148] usb usb5: Product: UHCI Host Controller
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.866160] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.866171] usb usb5: SerialNumber: 0000:00:10.3
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.866890] hub 5-0:1.0: USB hub found
Jan 11 13:40:51 Igel4210NEU vmunix: [ 2.866921] hub 5-0:1.0: 2 ports detected
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.032442] ata1.00: CFA: SanDisk SDCFH-004G, HDX 6.03, max UDMA/66
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.032460] ata1.00: 7813120 sectors, multi 1: LBA48
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.032481] ata1.00: limited to UDMA/33 due to 40-wire cable
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.048318] ata1.00: configured for UDMA/33
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.048699] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-00 6.03 PQ: 0 ANSI: 5
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.072075] tsc: Refined TSC clocksource calibration: 797.999 MHz
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.124082] usb 1-1: new high-speed USB device number 2 using ehci-pci
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.236500] sd 0:0:0:0: [sda] 7813120 512-byte logical blocks: (4.00 GB/3.72 GiB)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.236759] sd 0:0:0:0: [sda] Write Protect is off
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.236791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.236872] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.241229] sda: sda1 sda2 < sda5 >
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.243367] sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.247622] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.261959] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.261979] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.261991] usb 1-1: Product: USB2.0 Hub
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.263888] hub 1-1:1.0: USB hub found
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.264284] hub 1-1:1.0: 4 ports detected
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.536082] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.629747] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.629761] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.629773] usb 1-1.1: Product: USB2.0 Hub
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.632791] hub 1-1.1:1.0: USB hub found
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.634167] hub 1-1.1:1.0: 4 ports detected
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.708095] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.808766] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.808780] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.808791] usb 1-1.2: Product: FT232R USB UART
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.808803] usb 1-1.2: Manufacturer: FTDI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.808814] usb 1-1.2: SerialNumber: xxx
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.888083] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.986785] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.986799] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.986811] usb 1-1.3: Product: FT232R USB UART
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.986822] usb 1-1.3: Manufacturer: FTDI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 3.986833] usb 1-1.3: SerialNumber: xxx
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.064083] usb 1-1.4: new full-speed USB device number 6 using ehci-pci
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.072215] Switched to clocksource tsc
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.162809] usb 1-1.4: New USB device found, idVendor=0403, idProduct=6001
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.162824] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.162836] usb 1-1.4: Product: FT232R USB UART
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.162848] usb 1-1.4: Manufacturer: FTDI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.162859] usb 1-1.4: SerialNumber: xxx
Jan 11 13:40:51 Igel4210NEU acpid: starting up with netlink and the input layer
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.240078] usb 1-1.1.2: new full-speed USB device number 7 using ehci-pci
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.338704] usb 1-1.1.2: New USB device found, idVendor=0403, idProduct=6001
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.338718] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.338730] usb 1-1.1.2: Product: FT232R USB UART
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.338741] usb 1-1.1.2: Manufacturer: FTDI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.338752] usb 1-1.1.2: SerialNumber: xxx
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.416085] usb 1-1.1.3: new full-speed USB device number 8 using ehci-pci
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.516731] usb 1-1.1.3: New USB device found, idVendor=0403, idProduct=6001
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.516745] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.516757] usb 1-1.1.3: Product: FT232R USB UART
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.516768] usb 1-1.1.3: Manufacturer: FTDI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.516779] usb 1-1.1.3: SerialNumber: xxx
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.592083] usb 1-1.1.4: new full-speed USB device number 9 using ehci-pci
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.692628] usb 1-1.1.4: New USB device found, idVendor=0403, idProduct=6001
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.692642] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.692655] usb 1-1.1.4: Product: FT232R USB UART
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.692666] usb 1-1.1.4: Manufacturer: FTDI
Jan 11 13:40:51 Igel4210NEU vmunix: [ 4.692677] usb 1-1.1.4: SerialNumber: xxx
Jan 11 13:40:51 Igel4210NEU vmunix: [ 5.688110] floppy0: no floppy controllers found
Jan 11 13:40:51 Igel4210NEU vmunix: [ 5.688141] work still pending
Jan 11 13:40:51 Igel4210NEU vmunix: [ 5.735835] PM: Starting manual resume from disk
Jan 11 13:40:51 Igel4210NEU vmunix: [ 5.735860] PM: Hibernation image partition 8:5 present
Jan 11 13:40:51 Igel4210NEU vmunix: [ 5.735869] PM: Looking for hibernation image.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 5.736887] PM: Image not found (code -22)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 5.736899] PM: Hibernation image not present or could not be loaded.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 6.022748] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Jan 11 13:40:51 Igel4210NEU vmunix: [ 6.985682] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
Jan 11 13:40:51 Igel4210NEU vmunix: [ 7.211350] hwmon_vid: Using 6-bit VID table for VIA C7 CPU
Jan 11 13:40:51 Igel4210NEU vmunix: [ 7.215527] w83627hf: w83627hf: Found W83697HF chip at 0x290
Jan 11 13:40:51 Igel4210NEU vmunix: [ 7.781733] systemd-udevd[142]: starting version 215
Jan 11 13:40:51 Igel4210NEU vmunix: [ 8.137921] tsc: Marking TSC unstable due to TSC halts in idle
Jan 11 13:40:51 Igel4210NEU vmunix: [ 8.137964] ACPI: acpi_idle registered with cpuidle
Jan 11 13:40:51 Igel4210NEU vmunix: [ 8.140877] Switched to clocksource acpi_pm
Jan 11 13:40:51 Igel4210NEU vmunix: [ 8.170538] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Jan 11 13:40:51 Igel4210NEU vmunix: [ 8.170566] ACPI: Power Button [PWRB]
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.171015] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.171031] ACPI: Power Button [PWRF]
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.204444] parport_pc 00:06: reported by Plug and Play ACPI
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.204525] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.331528] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.568617] input: PC Speaker as /devices/platform/pcspkr/input/input4
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.577679] random: nonblocking pool is initialized
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.786272] usbcore: registered new interface driver usbserial
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.786354] usbcore: registered new interface driver usbserial_generic
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.786423] usbserial: USB Serial support registered for generic
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.819924] usbcore: registered new interface driver ftdi_sio
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.820160] usbserial: USB Serial support registered for FTDI USB Serial Device
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.833208] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.833427] usb 1-1.2: Detected FT232RL
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.833439] usb 1-1.2: Number of endpoints 2
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.833451] usb 1-1.2: Endpoint 1 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.833463] usb 1-1.2: Endpoint 2 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.833474] usb 1-1.2: Setting MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.842509] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.842639] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.842847] usb 1-1.3: Detected FT232RL
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.842859] usb 1-1.3: Number of endpoints 2
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.842870] usb 1-1.3: Endpoint 1 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.842882] usb 1-1.3: Endpoint 2 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.842893] usb 1-1.3: Setting MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.847712] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.847843] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.848003] usb 1-1.4: Detected FT232RL
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.848114] usb 1-1.4: Number of endpoints 2
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.848126] usb 1-1.4: Endpoint 1 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.848138] usb 1-1.4: Endpoint 2 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.848149] usb 1-1.4: Setting MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.856889] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.857017] ftdi_sio 1-1.1.2:1.0: FTDI USB Serial Device converter detected
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.857172] usb 1-1.1.2: Detected FT232RL
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.857183] usb 1-1.1.2: Number of endpoints 2
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.857195] usb 1-1.1.2: Endpoint 1 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.857207] usb 1-1.1.2: Endpoint 2 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.857218] usb 1-1.1.2: Setting MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.860576] usb 1-1.1.2: FTDI USB Serial Device converter now attached to ttyUSB3
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.860704] ftdi_sio 1-1.1.3:1.0: FTDI USB Serial Device converter detected
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.860873] usb 1-1.1.3: Detected FT232RL
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.860885] usb 1-1.1.3: Number of endpoints 2
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.860897] usb 1-1.1.3: Endpoint 1 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.860908] usb 1-1.1.3: Endpoint 2 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.860919] usb 1-1.1.3: Setting MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.870395] usb 1-1.1.3: FTDI USB Serial Device converter now attached to ttyUSB4
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.872244] ftdi_sio 1-1.1.4:1.0: FTDI USB Serial Device converter detected
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.872457] usb 1-1.1.4: Detected FT232RL
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.872469] usb 1-1.1.4: Number of endpoints 2
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.872481] usb 1-1.1.4: Endpoint 1 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.872493] usb 1-1.1.4: Endpoint 2 MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.872504] usb 1-1.1.4: Setting MaxPacketSize 64
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.876609] usb 1-1.1.4: FTDI USB Serial Device converter now attached to ttyUSB5
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.939942] VIA RNG detected
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.944944] Adding 210940k swap on /dev/sda5. Priority:-1 extents:1 across:210940k FS
Jan 11 13:40:51 Igel4210NEU acpid: 1 rule loaded
Jan 11 13:40:52 Igel4210NEU vmunix: [ 8.971368] longhaul: Option "enable" not set. Aborting.
Jan 11 13:40:52 Igel4210NEU vmunix: [ 9.015984] padlock_aes: Using VIA PadLock ACE for AES algorithm.
Jan 11 13:40:52 Igel4210NEU vmunix: [ 9.122229] padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
Jan 11 13:40:52 Igel4210NEU vmunix: [ 9.240354] ppdev: user-space parallel port driver
Jan 11 13:40:52 Igel4210NEU vmunix: [ 9.637084] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Jan 11 13:40:52 Igel4210NEU vmunix: [ 10.074751] systemd-journald[129]: Received request to flush runtime journal from PID 1
Jan 11 13:40:52 Igel4210NEU vmunix: [ 11.272121] floppy0: no floppy controllers found
Jan 11 13:40:52 Igel4210NEU vmunix: [ 11.272154] work still pending
Jan 11 13:40:52 Igel4210NEU vmunix: [ 12.698972] RPC: Registered named UNIX socket transport module.
Jan 11 13:40:52 Igel4210NEU vmunix: [ 12.698990] RPC: Registered udp transport module.
Jan 11 13:40:52 Igel4210NEU vmunix: [ 12.698997] RPC: Registered tcp transport module.
Jan 11 13:40:52 Igel4210NEU vmunix: [ 12.699005] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 11 13:40:52 Igel4210NEU vmunix: [ 12.734129] FS-Cache: Loaded
Jan 11 13:40:52 Igel4210NEU vmunix: [ 12.798018] FS-Cache: Netfs 'nfs' registered for caching
Jan 11 13:40:52 Igel4210NEU vmunix: [ 12.872467] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 11 13:40:51 Igel4210NEU acpid: waiting for events: event logging is off

Ausgabe: df -h

Spoiler

root@Igel4210NEU ~ > df -h
Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf
/dev/sda1 3,5G 1,4G 1,9G 42% /
udev 10M 0 10M 0% /dev
tmpfs 200M 4,5M 196M 3% /run
tmpfs 500M 0 500M 0% /dev/shm
tmpfs 5,0M 0 5,0M 0% /run/lock
tmpfs 500M 0 500M 0% /sys/fs/cgroup
tmpfs 300M 0 300M 0% /var/cache/apt/archives
tmpfs 300M 37M 264M 13% /var/log
tmpfs 300M 0 300M 0% /var/tmp
tmpfs 100M 508K 100M 1% /tmp

 

[cambridge1976]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

Und noch die Ausgabe von dmesg:

Spoiler

root@Igel4210NEU ~ > dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u2 (2016-01-02)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f6dffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f6e0000-0x000000003f6e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f6e3000-0x000000003f6effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f6f0000-0x000000003f6fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: VIA Technologies, Inc. CN700-8237/CN700-8237, BIOS 6.00 PG 08/03/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f6e0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-F7FFF write-through
[ 0.000000] F8000-F8FFF uncachable
[ 0.000000] F9000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0E8000000 mask FF8000000 write-combining
[ 0.000000] 3 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x36200000-0x363fffff]
[ 0.000000] [mem 0x36200000-0x363fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x361fffff]
[ 0.000000] [mem 0x34000000-0x361fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x36400000-0x375fdfff]
[ 0.000000] [mem 0x36400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[ 0.000000] BRK [0x0179d000, 0x0179efff] PGTABLE
[ 0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
[ 0.000000] BRK [0x017a0000, 0x017a0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x364be000-0x37256fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F4FD0 000014 (v00 CN700 )
[ 0.000000] ACPI: RSDT 0x000000003F6E3040 000028 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x000000003F6E30C0 000074 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0x000000003F6E3180 00454D (v01 CN700 AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000003F6E0000 000040
[ 0.000000] 128MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x3f6dffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3f6dffff]
[ 0.000000] On node 0 totalpages: 259710
[ 0.000000] free_area_init_node: node 0, pgdat c165d180, node_mem_map f5cce020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 258 pages used for memmap
[ 0.000000] HighMem zone: 32994 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x3f700000-0xfffeffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75ea000 s34752 r0 d22592 u57344
[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257938
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=a8119f21-aa96-4bc7-80f7-a7a42419bec8 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0003f6e0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1008036K/1038840K available (4608K kernel code, 522K rwdata, 1452K rodata, 656K init, 460K bss, 30804K reserved, 131976K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc1671000 - 0xc1715000 ( 656 kB)
.data : 0xc148040c - 0xc166fb40 (1981 kB)
.text : 0xc1000000 - 0xc148040c (4609 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 797.973 MHz processor
[ 0.004039] Calibrating delay loop (skipped), value calculated using timer frequency.. 1595.94 BogoMIPS (lpj=3191892)
[ 0.004054] pid_max: default: 32768 minimum: 301
[ 0.004111] ACPI: Core revision 20140424
[ 0.023096] ACPI: All ACPI Tables successfully acquired
[ 0.023118] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.023207] Security Framework initialized
[ 0.023251] AppArmor: AppArmor disabled by boot time parameter
[ 0.023259] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.023320] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.023332] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024382] Initializing cgroup subsys memory
[ 0.024409] Initializing cgroup subsys devices
[ 0.024449] Initializing cgroup subsys freezer
[ 0.024467] Initializing cgroup subsys net_cls
[ 0.024495] Initializing cgroup subsys blkio
[ 0.024519] Initializing cgroup subsys perf_event
[ 0.024532] Initializing cgroup subsys net_prio
[ 0.024629] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
tlb_flushall_shift: -1
[ 0.056789] Freeing SMP alternatives memory: 20K (c1715000 - c171a000)
[ 0.062218] ftrace: allocating 20810 entries in 41 pages
[ 0.092275] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.092287] smpboot: SMP motherboard not detected
[ 0.092295] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.092301] smpboot: SMP disabled
[ 0.092404] Performance Events: no PMU driver, software events only.
[ 0.100667] x86: Booted up 1 node, 1 CPUs
[ 0.100684] smpboot: Total of 1 processors activated (1595.94 BogoMIPS)
[ 0.100857] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.101213] devtmpfs: initialized
[ 0.102434] PM: Registering ACPI NVS region [mem 0x3f6e0000-0x3f6e2fff] (12288 bytes)
[ 0.109918] pinctrl core: initialized pinctrl subsystem
[ 0.110278] NET: Registered protocol family 16
[ 0.110886] cpuidle: using governor ladder
[ 0.110902] cpuidle: using governor menu
[ 0.111178] ACPI: bus type PCI registered
[ 0.111190] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.119902] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.119916] PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=1
[ 0.119923] PCI: Using configuration type 1 for base access
[ 0.125765] ACPI: Added _OSI(Module Device)
[ 0.125779] ACPI: Added _OSI(Processor Device)
[ 0.125788] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.125796] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.142128] ACPI: Interpreter enabled
[ 0.142191] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.142213] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.142261] ACPI: (supports S0 S1 S4 S5)
[ 0.142270] ACPI: Using PIC for interrupt routing
[ 0.142376] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.163880] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.163911] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.163937] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.164512] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.165351] PCI host bridge to bus 0000:00
[ 0.165367] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.165380] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.165393] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.165407] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.165420] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.165434] pci_bus 0000:00: root bus resource [mem 0x3f700000-0xffefffff]
[ 0.165490] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000
[ 0.165521] pci 0000:00:00.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ 0.166005] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000
[ 0.166433] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000
[ 0.166854] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
[ 0.167271] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000
[ 0.167699] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000
[ 0.168164] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[ 0.168255] pci 0000:00:01.0: supports D1
[ 0.168655] pci 0000:00:0f.0: [1106:0571] type 00 class 0x01018a
[ 0.168737] pci 0000:00:0f.0: reg 0x20: [io 0xeb00-0xeb0f]
[ 0.168777] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.168790] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.168802] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.168814] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.169250] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.169329] pci 0000:00:10.0: reg 0x20: [io 0xec00-0xec1f]
[ 0.169402] pci 0000:00:10.0: supports D1 D2
[ 0.169414] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169610] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.169881] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.169960] pci 0000:00:10.1: reg 0x20: [io 0xe800-0xe81f]
[ 0.170032] pci 0000:00:10.1: supports D1 D2
[ 0.170045] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170240] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.170499] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.170578] pci 0000:00:10.2: reg 0x20: [io 0xe900-0xe91f]
[ 0.170650] pci 0000:00:10.2: supports D1 D2
[ 0.170663] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170852] pci 0000:00:10.2: System wakeup disabled by ACPI
[ 0.171119] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[ 0.171197] pci 0000:00:10.3: reg 0x20: [io 0xea00-0xea1f]
[ 0.171270] pci 0000:00:10.3: supports D1 D2
[ 0.171282] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.171471] pci 0000:00:10.3: System wakeup disabled by ACPI
[ 0.171736] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[ 0.171773] pci 0000:00:10.4: reg 0x10: [mem 0xf6000000-0xf60000ff]
[ 0.171889] pci 0000:00:10.4: supports D1 D2
[ 0.171901] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172123] pci 0000:00:10.4: System wakeup disabled by ACPI
[ 0.172397] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[ 0.172497] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.172931] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[ 0.172967] pci 0000:00:11.5: reg 0x10: [io 0xe000-0xe0ff]
[ 0.173086] pci 0000:00:11.5: supports D1 D2
[ 0.173274] pci 0000:00:11.5: System wakeup disabled by ACPI
[ 0.173543] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.173579] pci 0000:00:12.0: reg 0x10: [io 0xe400-0xe4ff]
[ 0.173604] pci 0000:00:12.0: reg 0x14: [mem 0xf6001000-0xf60010ff]
[ 0.173711] pci 0000:00:12.0: supports D1 D2
[ 0.173723] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.173913] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.174356] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000
[ 0.174392] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf3ffffff pref]
[ 0.174415] pci 0000:01:00.0: reg 0x14: [mem 0xf4000000-0xf4ffffff]
[ 0.174475] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.174530] pci 0000:01:00.0: supports D1 D2
[ 0.174793] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.174813] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.174829] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
[ 0.174852] pci_bus 0000:00: on NUMA node 0
[ 0.176693] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 0.177093] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 0.177512] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 0.177850] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.178149] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.178434] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.178718] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.179010] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.181752] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.181767] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.181774] vgaarb: loaded
[ 0.181783] vgaarb: bridge control possible 0000:01:00.0
[ 0.182120] PCI: Using ACPI for IRQ routing
[ 0.182134] PCI: pci_cache_line_size set to 64 bytes
[ 0.182249] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.182260] e820: reserve RAM buffer [mem 0x3f6e0000-0x3fffffff]
[ 0.183163] Switched to clocksource pit
[ 0.209924] pnp: PnP ACPI init
[ 0.210002] ACPI: bus type PNP registered
[ 0.210915] system 00:00: [mem 0x000cda00-0x000cffff] has been reserved
[ 0.210933] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.210948] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.210963] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.210978] system 00:00: [mem 0x3f6e0000-0x3f6fffff] could not be reserved
[ 0.210994] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.211008] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.211024] system 00:00: [mem 0x00100000-0x3f6dffff] could not be reserved
[ 0.211039] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.211054] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.211072] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.211381] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 0.211396] system 00:01: [io 0x0500-0x050f] has been reserved
[ 0.211411] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.213634] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.213652] system 00:02: [io 0x0294-0x0297] has been reserved
[ 0.213668] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.213873] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.214946] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.215798] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.217098] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.217470] pnp: PnP ACPI: found 7 devices
[ 0.217478] ACPI: bus type PNP unregistered
[ 0.217502] PnPBIOS: Disabled by ACPI PNP
[ 0.262242] Switched to clocksource acpi_pm
[ 0.262347] pci 0000:01:00.0: BAR 6: assigned [mem 0xf5000000-0xf500ffff pref]
[ 0.262363] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.262383] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.262400] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
[ 0.262422] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.262435] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.262448] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.262461] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.262474] pci_bus 0000:00: resource 8 [mem 0x3f700000-0xffefffff]
[ 0.262489] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.262503] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.262609] NET: Registered protocol family 2
[ 0.263714] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.263848] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.264053] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.264251] TCP: reno registered
[ 0.264264] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.264309] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.264577] NET: Registered protocol family 1
[ 0.264693] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.266117] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.266128] PCI: setting IRQ 11 as level-triggered
[ 0.267819] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 0.267827] PCI: setting IRQ 10 as level-triggered
[ 0.267847] pci 0000:00:10.2: VIA VLink IRQ fixup, from 5 to 10
[ 0.268392] pci 0000:00:10.3: VIA VLink IRQ fixup, from 5 to 10
[ 0.269715] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.269970] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 0.270012] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.270021] PCI: CLS 32 bytes, default 64
[ 0.270278] Unpacking initramfs...
[ 2.072707] Freeing initrd memory: 13924K (f64be000 - f7257000)
[ 2.073049] microcode: no support for this CPU vendor
[ 2.074560] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 2.074673] audit: initializing netlink subsys (disabled)
[ 2.074747] audit: type=2000 audit(1452516039.070:1): initialized
[ 2.076183] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.076270] zbud: loaded
[ 2.076561] VFS: Disk quotas dquot_6.5.2
[ 2.076616] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.076853] msgmni has been set to 1738
[ 2.078295] alg: No test for stdrng (krng)
[ 2.078419] bounce: pool size: 64 pages
[ 2.078491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.078672] io scheduler noop registered
[ 2.078686] io scheduler deadline registered
[ 2.078853] io scheduler cfq registered (default)
[ 2.079434] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.079540] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.079800] GHES: HEST is not enabled!
[ 2.079916] isapnp: Scanning for PnP cards...
[ 2.434455] isapnp: No Plug & Play device found
[ 2.434845] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.455487] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.476196] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 2.477674] Linux agpgart interface v0.103
[ 2.478363] agpgart: Detected VIA VT3314 chipset
[ 2.489124] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 2.489687] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.490350] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.490380] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.491114] mousedev: PS/2 mouse device common for all mice
[ 2.491356] rtc_cmos 00:03: RTC can wake from S4
[ 2.491802] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.491861] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
[ 2.491943] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.493825] TCP: cubic registered
[ 2.493884] NET: Registered protocol family 10
[ 2.494811] mip6: Mobile IPv6
[ 2.494834] NET: Registered protocol family 17
[ 2.494864] mpls_gso: MPLS GSO support
[ 2.494888] mce: Unable to init device /dev/mcelog (rc: -5)
[ 2.495160] Using IPI No-Shortcut mode
[ 2.495799] registered taskstats version 1
[ 2.497049] rtc_cmos 00:03: setting system clock to 2016-01-11 12:40:40 UTC (1452516040)
[ 2.497347] PM: Hibernation image not present or could not be loaded.
[ 2.498897] Freeing unused kernel memory: 656K (c1671000 - c1715000)
[ 2.499120] Write protecting the kernel text: 4612k
[ 2.499363] Write protecting the kernel read-only data: 1456k
[ 2.499370] NX-protecting the kernel data: 3580k
[ 2.567347] systemd-udevd[54]: starting version 215
[ 2.573141] random: systemd-udevd urandom read with 10 bits of entropy available
[ 2.746708] SCSI subsystem initialized
[ 2.751844] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 2.751862] via_rhine: Broken BIOS detected, avoid_D3 enabled
[ 2.771825] ACPI: bus type USB registered
[ 2.771990] usbcore: registered new interface driver usbfs
[ 2.777060] usbcore: registered new interface driver hub
[ 2.781067] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1e400, 00:e0:c5:4e:7a:69, IRQ 11
[ 2.781871] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1
[ 2.783012] usbcore: registered new device driver usb
[ 2.787246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.791256] ehci-pci: EHCI PCI platform driver
[ 2.802265] ehci-pci 0000:00:10.4: EHCI Host Controller
[ 2.802308] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 2.802452] ehci-pci 0000:00:10.4: irq 10, io mem 0xf6000000
[ 2.805547] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.812129] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 2.812439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.812452] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.812464] usb usb1: Product: EHCI Host Controller
[ 2.812476] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 2.812487] usb usb1: SerialNumber: 0000:00:10.4
[ 2.813230] hub 1-0:1.0: USB hub found
[ 2.813266] hub 1-0:1.0: 8 ports detected
[ 2.815616] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.815657] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.815682] uhci_hcd 0000:00:10.0: detected 2 ports
[ 2.815735] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000ec00
[ 2.816002] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.816100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.816113] usb usb2: Product: UHCI Host Controller
[ 2.816124] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 2.816135] usb usb2: SerialNumber: 0000:00:10.0
[ 2.817159] hub 2-0:1.0: USB hub found
[ 2.818113] hub 2-0:1.0: 2 ports detected
[ 2.819094] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.819125] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.819147] uhci_hcd 0000:00:10.1: detected 2 ports
[ 2.819197] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e800
[ 2.820483] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.820501] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.820513] usb usb3: Product: UHCI Host Controller
[ 2.820524] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 2.820535] usb usb3: SerialNumber: 0000:00:10.1
[ 2.823466] libata version 3.00 loaded.
[ 2.825183] hub 3-0:1.0: USB hub found
[ 2.826531] hub 3-0:1.0: 2 ports detected
[ 2.829669] pata_via 0000:00:0f.0: version 0.3.4
[ 2.829962] pata_via 0000:00:0f.0: VIA VLink IRQ fixup, from 255 to 11
[ 2.853180] scsi0 : pata_via
[ 2.862391] scsi1 : pata_via
[ 2.862772] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xeb00 irq 14
[ 2.862784] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xeb08 irq 15
[ 2.863310] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.863348] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.863372] uhci_hcd 0000:00:10.2: detected 2 ports
[ 2.863422] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000e900
[ 2.863981] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.863995] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.864007] usb usb4: Product: UHCI Host Controller
[ 2.864087] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 2.864098] usb usb4: SerialNumber: 0000:00:10.2
[ 2.864890] hub 4-0:1.0: USB hub found
[ 2.864923] hub 4-0:1.0: 2 ports detected
[ 2.865768] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.865798] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 2.865819] uhci_hcd 0000:00:10.3: detected 2 ports
[ 2.865869] uhci_hcd 0000:00:10.3: irq 10, io base 0x0000ea00
[ 2.866123] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.866136] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.866148] usb usb5: Product: UHCI Host Controller
[ 2.866160] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 2.866171] usb usb5: SerialNumber: 0000:00:10.3
[ 2.866890] hub 5-0:1.0: USB hub found
[ 2.866921] hub 5-0:1.0: 2 ports detected
[ 3.032442] ata1.00: CFA: SanDisk SDCFH-004G, HDX 6.03, max UDMA/66
[ 3.032460] ata1.00: 7813120 sectors, multi 1: LBA48
[ 3.032481] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 3.048318] ata1.00: configured for UDMA/33
[ 3.048699] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-00 6.03 PQ: 0 ANSI: 5
[ 3.072075] tsc: Refined TSC clocksource calibration: 797.999 MHz
[ 3.124082] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.236500] sd 0:0:0:0: [sda] 7813120 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 3.236759] sd 0:0:0:0: [sda] Write Protect is off
[ 3.236791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.236872] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.241229] sda: sda1 sda2 < sda5 >
[ 3.243367] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.247622] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.261959] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[ 3.261979] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.261991] usb 1-1: Product: USB2.0 Hub
[ 3.263888] hub 1-1:1.0: USB hub found
[ 3.264284] hub 1-1:1.0: 4 ports detected
[ 3.536082] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 3.629747] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610
[ 3.629761] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.629773] usb 1-1.1: Product: USB2.0 Hub
[ 3.632791] hub 1-1.1:1.0: USB hub found
[ 3.634167] hub 1-1.1:1.0: 4 ports detected
[ 3.708095] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 3.808766] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001
[ 3.808780] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.808791] usb 1-1.2: Product: FT232R USB UART
[ 3.808803] usb 1-1.2: Manufacturer: FTDI
[ 3.808814] usb 1-1.2: SerialNumber: xxx
[ 3.888083] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
[ 3.986785] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
[ 3.986799] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.986811] usb 1-1.3: Product: FT232R USB UART
[ 3.986822] usb 1-1.3: Manufacturer: FTDI
[ 3.986833] usb 1-1.3: SerialNumber: xxx
[ 4.064083] usb 1-1.4: new full-speed USB device number 6 using ehci-pci
[ 4.072215] Switched to clocksource tsc
[ 4.162809] usb 1-1.4: New USB device found, idVendor=0403, idProduct=6001
[ 4.162824] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.162836] usb 1-1.4: Product: FT232R USB UART
[ 4.162848] usb 1-1.4: Manufacturer: FTDI
[ 4.162859] usb 1-1.4: SerialNumber: xxx
[ 4.240078] usb 1-1.1.2: new full-speed USB device number 7 using ehci-pci
[ 4.338704] usb 1-1.1.2: New USB device found, idVendor=0403, idProduct=6001
[ 4.338718] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.338730] usb 1-1.1.2: Product: FT232R USB UART
[ 4.338741] usb 1-1.1.2: Manufacturer: FTDI
[ 4.338752] usb 1-1.1.2: SerialNumber: xxx
[ 4.416085] usb 1-1.1.3: new full-speed USB device number 8 using ehci-pci
[ 4.516731] usb 1-1.1.3: New USB device found, idVendor=0403, idProduct=6001
[ 4.516745] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.516757] usb 1-1.1.3: Product: FT232R USB UART
[ 4.516768] usb 1-1.1.3: Manufacturer: FTDI
[ 4.516779] usb 1-1.1.3: SerialNumber: xxx
[ 4.592083] usb 1-1.1.4: new full-speed USB device number 9 using ehci-pci
[ 4.692628] usb 1-1.1.4: New USB device found, idVendor=0403, idProduct=6001
[ 4.692642] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.692655] usb 1-1.1.4: Product: FT232R USB UART
[ 4.692666] usb 1-1.1.4: Manufacturer: FTDI
[ 4.692677] usb 1-1.1.4: SerialNumber: xxx
[ 5.688110] floppy0: no floppy controllers found
[ 5.688141] work still pending
[ 5.735835] PM: Starting manual resume from disk
[ 5.735860] PM: Hibernation image partition 8:5 present
[ 5.735869] PM: Looking for hibernation image.
[ 5.736887] PM: Image not found (code -22)
[ 5.736899] PM: Hibernation image not present or could not be loaded.
[ 6.022748] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.985682] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.211350] hwmon_vid: Using 6-bit VID table for VIA C7 CPU
[ 7.215527] w83627hf: w83627hf: Found W83697HF chip at 0x290
[ 7.781733] systemd-udevd[142]: starting version 215
[ 8.137921] tsc: Marking TSC unstable due to TSC halts in idle
[ 8.137964] ACPI: acpi_idle registered with cpuidle
[ 8.140877] Switched to clocksource acpi_pm
[ 8.170538] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 8.170566] ACPI: Power Button [PWRB]
[ 8.171015] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.171031] ACPI: Power Button [PWRF]
[ 8.204444] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.204525] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.331528] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.568617] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.577679] random: nonblocking pool is initialized
[ 8.786272] usbcore: registered new interface driver usbserial
[ 8.786354] usbcore: registered new interface driver usbserial_generic
[ 8.786423] usbserial: USB Serial support registered for generic
[ 8.819924] usbcore: registered new interface driver ftdi_sio
[ 8.820160] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 8.833208] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 8.833427] usb 1-1.2: Detected FT232RL
[ 8.833439] usb 1-1.2: Number of endpoints 2
[ 8.833451] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 8.833463] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 8.833474] usb 1-1.2: Setting MaxPacketSize 64
[ 8.842509] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 8.842639] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 8.842847] usb 1-1.3: Detected FT232RL
[ 8.842859] usb 1-1.3: Number of endpoints 2
[ 8.842870] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 8.842882] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 8.842893] usb 1-1.3: Setting MaxPacketSize 64
[ 8.847712] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 8.847843] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 8.848003] usb 1-1.4: Detected FT232RL
[ 8.848114] usb 1-1.4: Number of endpoints 2
[ 8.848126] usb 1-1.4: Endpoint 1 MaxPacketSize 64
[ 8.848138] usb 1-1.4: Endpoint 2 MaxPacketSize 64
[ 8.848149] usb 1-1.4: Setting MaxPacketSize 64
[ 8.856889] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
[ 8.857017] ftdi_sio 1-1.1.2:1.0: FTDI USB Serial Device converter detected
[ 8.857172] usb 1-1.1.2: Detected FT232RL
[ 8.857183] usb 1-1.1.2: Number of endpoints 2
[ 8.857195] usb 1-1.1.2: Endpoint 1 MaxPacketSize 64
[ 8.857207] usb 1-1.1.2: Endpoint 2 MaxPacketSize 64
[ 8.857218] usb 1-1.1.2: Setting MaxPacketSize 64
[ 8.860576] usb 1-1.1.2: FTDI USB Serial Device converter now attached to ttyUSB3
[ 8.860704] ftdi_sio 1-1.1.3:1.0: FTDI USB Serial Device converter detected
[ 8.860873] usb 1-1.1.3: Detected FT232RL
[ 8.860885] usb 1-1.1.3: Number of endpoints 2
[ 8.860897] usb 1-1.1.3: Endpoint 1 MaxPacketSize 64
[ 8.860908] usb 1-1.1.3: Endpoint 2 MaxPacketSize 64
[ 8.860919] usb 1-1.1.3: Setting MaxPacketSize 64
[ 8.870395] usb 1-1.1.3: FTDI USB Serial Device converter now attached to ttyUSB4
[ 8.872244] ftdi_sio 1-1.1.4:1.0: FTDI USB Serial Device converter detected
[ 8.872457] usb 1-1.1.4: Detected FT232RL
[ 8.872469] usb 1-1.1.4: Number of endpoints 2
[ 8.872481] usb 1-1.1.4: Endpoint 1 MaxPacketSize 64
[ 8.872493] usb 1-1.1.4: Endpoint 2 MaxPacketSize 64
[ 8.872504] usb 1-1.1.4: Setting MaxPacketSize 64
[ 8.876609] usb 1-1.1.4: FTDI USB Serial Device converter now attached to ttyUSB5
[ 8.939942] VIA RNG detected
[ 8.944944] Adding 210940k swap on /dev/sda5. Priority:-1 extents:1 across:210940k FS
[ 8.971368] longhaul: Option "enable" not set. Aborting.
[ 9.015984] padlock_aes: Using VIA PadLock ACE for AES algorithm.
[ 9.122229] padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
[ 9.240354] ppdev: user-space parallel port driver
[ 9.637084] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.074751] systemd-journald[129]: Received request to flush runtime journal from PID 1
[ 11.272121] floppy0: no floppy controllers found
[ 11.272154] work still pending
[ 12.698972] RPC: Registered named UNIX socket transport module.
[ 12.698990] RPC: Registered udp transport module.
[ 12.698997] RPC: Registered tcp transport module.
[ 12.699005] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.734129] FS-Cache: Loaded
[ 12.798018] FS-Cache: Netfs 'nfs' registered for caching
[ 12.872467] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

 

[Alex]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

Ein Syslog bom Booten hilft nix, vom Zeitpunkt wenn er hängt, wäre sinnvoll

 

[axel]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

Hi,

also ich habs mal überflogen, sieht alles OK aus so.

Wie alt ist die CF-Karte?

 

[cambridge1976]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

Danke erst mal.

Habe schon meine Ersatz CF-Karte genommen und komplett kopiert. Die läuft jetzt!

 

[axel]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

OK,

dann könnte es sein, daß sich die CF-Karte langsam verabschiedet hat.

Rebootest Du denn sehr oft? Ist bei einer CF zu vermeiden.

Gruß

 

[cambridge1976]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

Normalerweise läuft er immer durch! Neustart 2x im Jahr um ein Image zu machen von der CF!

509.28 MB vom Ram belegt! Läuft jetzt 2 Std. 48 Minuten!

 

[Alex]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

Wie gesagt, die RAM-Belegung ist unerheblich.
Macht er auch mit 32 GB RAM

 

[cambridge1976]

AW: Igel 4210 - Debian Jessie 8 - Ram Voll

So habe meinen Ersatz Igel neu aufgesetzt!

CF kopiert, MAC Adresse geändert und beide laufen nun.

Vielen Dank an alle.