HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

[Skywalker]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Und wie sieht das WebInterface der OScam aus? (am besten ScreenShot machen)
192.168.178.1:56783

Login mit
oscam
oscam

 

[lustig63]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Geht nicht. Weder mit IE noch mit Safari.
403 Forbidden
Access denied.

Sie müssen registriert sein, um Links zu sehen.

oder nur 192.168.178.1:56783

 

[Skywalker]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Egal, sollte eigentlich beides funzen...

 

[lustig63]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Brauch mer das Oscam-Wi oder können wir die logs im Freetz-WI auslesen?

 

[Skywalker]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Das OScam WI sagt eigentlich, dass das Wi einsatzfähig ist

...
2011/01/05 22:10:17 402 h HTTP Server listening on port 56783
2011/01/05 22:10:17 400 s http thread started
.....

Puhhh, schwerer Stoff.
Teste mal
127.0.0.1:56783

Update:
hab gerade das hier entdeckt

3) In der Freetz AVM-Firewall habe ich unter Port Forwarding die Ports 12000, 56781 und 56783 freigegeben

Das war nicht gut.
Also, geh mal in deine OScam.config und editier den HTTP Port fürs WI in irgenteinen anderen.

 

[Skywalker]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

z.B. so

..
...
.....
[webif]
httpport = 40100
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.177.1-192.168.178.255
httphideidleclients = 0
httpreadonly = 0
....
......

Dannach die FB mal neustarten und wieder den Zugriff auf WI von OScam testen
192.168.178.1:40100

 

[datamen]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

lasst mal die zeile weg:

httpallowed = 127.0.0.1,192.168.177.1-192.168.178.255

und dann komplett neu starten.

 

[lustig63]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Skywalker und datamen,

Also mit 192.168.178.1:40100
Kein Zugriff
Der Oscam.log:

Spoiler

>> OSCam << cardserver started at Sat Jan 1 01:01:13 2000
-------------------------------------------------------------------------------
2000/01/01 1:01:13 400 s version=1.00-unstable_svn, build #4162, system=mips-unknown-unknown, nice=-1
2000/01/01 1:01:13 400 s client max. idle=120 sec, debug level=0
2000/01/01 1:01:13 400 s max. logsize=2480 Kb
2000/01/01 1:01:13 400 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2000/01/01 1:01:13 400 s auth size=4800
2000/01/01 1:01:13 400 s services reloaded: 0 services freed, 6 services loaded
2000/01/01 1:01:13 400 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 1:01:13 400 s signal handling initialized (type=sysv)
2000/01/01 1:01:13 400 s 142 service-id's loaded
2000/01/01 1:01:13 400 s 145 tier-id's loaded
2011/01/05 23:02:52 400 s 882 provid's loaded
2011/01/05 23:02:52 400 s 22 lengths for caid guessing loaded
2011/01/05 23:02:52 400 s monitor: initialized (fd=6, port=988)
2011/01/05 23:02:52 400 s camd33: disabled
2011/01/05 23:02:52 400 s camd35: disabled
2011/01/05 23:02:52 400 s cs378x: disabled
2011/01/05 23:02:52 400 s newcamd: initialized (fd=7, port=56781, crypted)
2011/01/05 23:02:52 400 s CAID: 1843
2011/01/05 23:02:52 400 s provid #0: 000000
2011/01/05 23:02:52 400 s cccam: disabled
2011/01/05 23:02:52 400 s radegast: disabled
2011/01/05 23:02:52 402 h HTTP Server listening on port 40100
2011/01/05 23:02:52 400 s http thread started
2011/01/05 23:02:52 400 s creating thread for device /dev/ttyUSB0
2011/01/05 23:02:52 803 r reader thread started (thread= 803, label=hdplus, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2011/01/05 23:02:52 400 s waiting for local card init
2011/01/05 23:02:54 803 r hdplus card detected
2011/01/05 23:03:02 803 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2011/01/05 23:03:03 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/01/05 23:03:05 803 r detect native nagra card
2011/01/05 23:03:17 803 r card system not supported
2011/01/05 23:03:17 803 r Normal mode failed, reverting to Deprecated Mode
2011/01/05 23:03:25 803 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2011/01/05 23:03:26 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/01/05 23:03:28 803 r detect native nagra card
2011/01/05 23:03:41 803 r card system not supported
2011/01/05 23:03:41 803 r card initializing error
2011/01/05 23:03:42 400 s init for all local cards done
2011/01/05 23:03:42 400 s anti cascading disabled
2011/01/05 23:03:42 C04 c client connected to 56781 port
2011/01/05 23:03:42 C04 c Connection closed to client
2011/01/05 23:03:42 C04 c thread C04 ended!
2011/01/05 23:03:42 1005 c client connected to 56781 port
2011/01/05 23:03:42 1406 c client connected to 56781 port
2011/01/05 23:03:42 1406 c Connection closed to client
2011/01/05 23:03:42 1406 c thread 1406 ended!
2011/01/05 23:03:42 1005 c Connection closed to client
2011/01/05 23:03:42 1005 c thread 1005 ended!
2011/01/05 23:03:52 1804 c client connected to 56781 port
2011/01/05 23:03:52 1804 c encrypted newcamd:56781-client 192.168.178.1 granted (4all_HDplus, au=hdplus)
2011/01/05 23:03:52 1804 c user 4all_HDplus authenticated successfully (CCcam)
2011/01/05 23:03:52 1804 c AU enabled for user 4all_HDplus on reader hdplus
2011/01/05 23:04:40 402 h unauthorized access from 192.168.178.10
2011/01/05 23:04:40 402 h unauthorized access from 192.168.178.10
2011/01/05 23:05:19 402 h unauthorized access from 192.168.178.10
2011/01/05 23:05:19 402 h unauthorized access from 192.168.178.10
2011/01/05 23:05:19 402 h unauthorized access from 192.168.178.10

Mit #httpallowed = 127.0.0.1,192.168.177.1-192.168.178.255
192.168.178.1:40100
Kein Zugriff
Der Oscam.log:

Spoiler

>> OSCam << cardserver started at Sat Jan 1 01:01:17 2000
-------------------------------------------------------------------------------
2000/01/01 1:01:17 400 s version=1.00-unstable_svn, build #4162, system=mips-unknown-unknown, nice=-1
2000/01/01 1:01:17 400 s client max. idle=120 sec, debug level=0
2000/01/01 1:01:17 400 s max. logsize=2480 Kb
2000/01/01 1:01:17 400 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2000/01/01 1:01:17 400 s auth size=4800
2000/01/01 1:01:17 400 s services reloaded: 0 services freed, 6 services loaded
2000/01/01 1:01:17 400 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 1:01:17 400 s signal handling initialized (type=sysv)
2000/01/01 1:01:17 400 s 142 service-id's loaded
2000/01/01 1:01:17 400 s 145 tier-id's loaded
2000/01/01 1:01:17 400 s 882 provid's loaded
2000/01/01 1:01:17 400 s 22 lengths for caid guessing loaded
2000/01/01 1:01:18 400 s monitor: initialized (fd=6, port=988)
2000/01/01 1:01:18 400 s camd33: disabled
2000/01/01 1:01:18 400 s camd35: disabled
2000/01/01 1:01:18 400 s cs378x: disabled
2000/01/01 1:01:18 400 s newcamd: initialized (fd=7, port=56781, crypted)
2000/01/01 1:01:18 400 s CAID: 1843
2000/01/01 1:01:18 400 s provid #0: 000000
2000/01/01 1:01:18 400 s cccam: disabled
2000/01/01 1:01:18 400 s radegast: disabled
2000/01/01 1:01:18 402 h HTTP Server listening on port 40100
2000/01/01 1:01:18 400 s http thread started
2000/01/01 1:01:18 400 s creating thread for device /dev/ttyUSB0
2000/01/01 1:01:18 803 r reader thread started (thread= 803, label=hdplus, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2000/01/01 1:01:18 400 s waiting for local card init
2000/01/01 1:01:20 803 r hdplus card detected
2011/01/05 23:21:41 803 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2011/01/05 23:21:42 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/01/05 23:21:44 803 r detect native nagra card
2011/01/05 23:21:55 803 r card system not supported
2011/01/05 23:21:55 803 r Normal mode failed, reverting to Deprecated Mode
2011/01/05 23:22:02 803 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2011/01/05 23:22:03 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/01/05 23:22:05 803 r detect native nagra card
2011/01/05 23:22:17 803 r card system not supported
2011/01/05 23:22:17 803 r card initializing error
2011/01/05 23:22:17 400 s init for all local cards done
2011/01/05 23:22:17 400 s anti cascading disabled
2011/01/05 23:22:17 C04 c client connected to 56781 port
2011/01/05 23:22:17 C04 c Connection closed to client
2011/01/05 23:22:17 C04 c thread C04 ended!
2011/01/05 23:22:17 1005 c client connected to 56781 port
2011/01/05 23:22:17 1005 c Connection closed to client
2011/01/05 23:22:17 1005 c thread 1005 ended!
2011/01/05 23:22:17 1406 c client connected to 56781 port
2011/01/05 23:22:17 1406 c encrypted newcamd:56781-client 192.168.178.1 granted (4all_HDplus, au=hdplus)
2011/01/05 23:22:17 1406 c user 4all_HDplus authenticated successfully (CCcam)
2011/01/05 23:22:17 1406 c AU enabled for user 4all_HDplus on reader hdplus
2011/01/05 23:23:24 402 h unauthorized access from 192.168.178.10
2011/01/05 23:23:24 402 h unauthorized access from 192.168.178.10
2011/01/05 23:23:25 402 h unauthorized access from 192.168.178.10
2011/01/05 23:23:32 402 h unauthorized access from 192.168.178.10
2011/01/05 23:23:32 402 h unauthorized access from 192.168.178.10
2011/01/05 23:23:32 402 h unauthorized access from 192.168.178.10
2011/01/05 23:24:19 402 h unauthorized access from 192.168.178.10
2011/01/05 23:24:19 402 h unauthorized access from 192.168.178.10
2011/01/05 23:24:22 402 h unauthorized access from 192.168.178.10
2011/01/05 23:24:22 402 h unauthorized access from 192.168.178.10

Gruß
lustig63

 

[lustig63]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

ICH BIN DRINN................:emoticon-0167-beer::emoticon-0167-beer::emoticon-0167-beer:

Hab das # nochmals weggemacht, Rechner, Fritz, TV und USB-Hub von Strom genommen

jetzt gehts. Mann erst das kaputte Datenkabel und jetzt das.

Der Oscam.log:

Spoiler

>> OSCam << cardserver started at Sat Jan 1 01:01:13 2000
-------------------------------------------------------------------------------
2000/01/01 1:01:13 400 s version=1.00-unstable_svn, build #4162, system=mips-unknown-unknown, nice=-1
2000/01/01 1:01:13 400 s client max. idle=120 sec, debug level=0
2000/01/01 1:01:13 400 s max. logsize=2480 Kb
2000/01/01 1:01:13 400 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2000/01/01 1:01:13 400 s auth size=4800
2000/01/01 1:01:13 400 s services reloaded: 0 services freed, 6 services loaded
2000/01/01 1:01:13 400 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 1:01:13 400 s signal handling initialized (type=sysv)
2000/01/01 1:01:13 400 s 142 service-id's loaded
2000/01/01 1:01:13 400 s 145 tier-id's loaded
2000/01/01 1:01:13 400 s 882 provid's loaded
2000/01/01 1:01:13 400 s 22 lengths for caid guessing loaded
2000/01/01 1:01:13 400 s monitor: initialized (fd=6, port=988)
2000/01/01 1:01:13 400 s camd33: disabled
2000/01/01 1:01:13 400 s camd35: disabled
2000/01/01 1:01:13 400 s cs378x: disabled
2000/01/01 1:01:13 400 s newcamd: initialized (fd=7, port=56781, crypted)
2000/01/01 1:01:13 400 s CAID: 1843
2000/01/01 1:01:13 400 s provid #0: 000000
2000/01/01 1:01:13 400 s cccam: disabled
2000/01/01 1:01:13 400 s radegast: disabled
2000/01/01 1:01:13 400 s http thread started
2000/01/01 1:01:13 400 s creating thread for device /dev/ttyUSB0
2000/01/01 1:01:13 402 h HTTP Server listening on port 40100
2000/01/01 1:01:13 803 r reader thread started (thread= 803, label=hdplus, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2000/01/01 1:01:13 400 s waiting for local card init
2000/01/01 1:01:15 803 r hdplus card detected
2011/01/05 23:58:17 803 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2011/01/05 23:58:19 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/01/05 23:58:21 803 r detect native nagra card
2011/01/05 23:58:33 803 r card system not supported
2011/01/05 23:58:33 803 r Normal mode failed, reverting to Deprecated Mode
2011/01/05 23:58:41 803 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2011/01/05 23:58:42 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/01/05 23:58:44 803 r detect native nagra card
2011/01/05 23:58:57 803 r card system not supported
2011/01/05 23:58:57 803 r card initializing error
2011/01/05 23:58:58 400 s init for all local cards done
2011/01/05 23:58:58 400 s anti cascading disabled
2011/01/05 23:58:58 C04 c client connected to 56781 port
2011/01/05 23:58:58 C04 c Connection closed to client
2011/01/05 23:58:58 C04 c thread C04 ended!
2011/01/05 23:58:58 1005 c client connected to 56781 port
2011/01/05 23:58:58 1005 c Connection closed to client
2011/01/05 23:58:58 1005 c thread 1005 ended!
2011/01/05 23:58:58 1406 c client connected to 56781 port
2011/01/05 23:58:58 1406 c Connection closed to client
2011/01/05 23:58:58 1406 c thread 1406 ended!
2011/01/05 23:58:59 1804 c client connected to 56781 port
2011/01/05 23:58:59 1804 c encrypted newcamd:56781-client 192.168.178.1 granted (4all_HDplus, au=hdplus)
2011/01/05 23:58:59 1804 c user 4all_HDplus authenticated successfully (CCcam)
2011/01/05 23:58:59 1804 c AU enabled for user 4all_HDplus on reader hdplus

Jetzt muß ich aber Schluß machen. Meine Frau hat Heute Geburtstag.

Gruß
lustig63

 

[szonic]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Moin!
Deine Frau hat Geburtstag und Du daddelst am Rechner?

Du bist ein echter Kerl, mein Held! :good:...ich müsste ausziehen, samt Rechner ))

So, nun zum Smargo:
Eventuell hilft es den Smargo mal neu zu proggen, dazu lädst Du Dir diese mal runter:
Link ist nicht mehr aktiv.

und zur Unterstützung dieses:

Link ist nicht mehr aktiv.

Dann testet Du folgende Einstellungen mal durch:

• auto, normal, 1,0

• auto, normal, 0,0

Also einstellen, smargo ran, Karte rein, FB booten, und im Log sehen ob der Fehler Card detect fail verschwindet.
Wenn die Karte erkannt wird steht da noch etwas von Cardserial, aber der Fehler ist dann weg.
Geht es nicht, nächste Einstellung probieren.

Dann lesen wir uns wieder.

Grüsse
szonic

P.S.: Grüsse an das Geburtstagskind

 

[lustig63]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Hallo szonic,

das Geburtstagskind schläft noch. Hab mich ausdem Bett geschlichen, da mir die Sache nicht mehr aus dem Kopf geht..........

Also das mit dem Programieren müsste klappen. Hab das schon auf Vers. 1.5 gemacht. Hab da eine Anleitung. Video hab ich ebenfalls. Ist glaub irgendwas mit Dreambox.

Auto,normal,0,0 hab ich zwar schon programiert, werds aber nochmal machen. Ebenfalls mit 1,0.

Melde mich dann wieder. Kann allerdings eine Weile dauern.

Gruß
lustig 63

 

[Skywalker]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Also die Smargo+ (Hersteller: Maxdigital) Settings für die HD+ Karte wären:
Smargo+ mit Firmware 1.5
Auto
Normal
0
0
Dann die Karte (richtig) in den Smargo stecken und diesen an den USB Hub der Fritze.
Jetzt noch die Fritzbox mal rebooten lassen. Das kannst du bequem auf der Freetzoberfläche unter System (Box neustarten REBOOT)machen

 

[lustig63]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Hallo Leute,

hab mir schnell wieder Zeit genommen.

Meldung des Smargo bei cat /proc/bus/usb/devices
...
...
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0403 ProdID=6001 Rev= 4.00
S: SerialNumber=Reader 8XXXXX3
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
...
...

Smartreadereinstellungen geändert auf Auto,Normal,T=1,0
Writing settings successful

Karte richtig in Smargo gesteckt (sonst wärs ja allein auf dem Receiver vorher nicht hell geworden).

Log oscam.conf mit Auto,Normal,T=1,0:

Spoiler

>> OSCam << cardserver started at Sat Jan 1 01:01:13 2000
-------------------------------------------------------------------------------
2000/01/01 1:01:13 400 s version=1.00-unstable_svn, build #4162, system=mips-unknown-unknown, nice=-1
2000/01/01 1:01:13 400 s client max. idle=120 sec, debug level=0
2000/01/01 1:01:13 400 s max. logsize=2480 Kb
2000/01/01 1:01:13 400 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2000/01/01 1:01:13 400 s auth size=4800
2000/01/01 1:01:13 400 s services reloaded: 0 services freed, 6 services loaded
2000/01/01 1:01:13 400 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 1:01:13 400 s signal handling initialized (type=sysv)
2000/01/01 1:01:13 400 s 142 service-id's loaded
2000/01/01 1:01:13 400 s 145 tier-id's loaded
2000/01/01 1:01:13 400 s 882 provid's loaded
2000/01/01 1:01:13 400 s 22 lengths for caid guessing loaded
2000/01/01 1:01:13 400 s monitor: initialized (fd=6, port=988)
2000/01/01 1:01:13 400 s camd33: disabled
2000/01/01 1:01:13 400 s camd35: disabled
2000/01/01 1:01:13 400 s cs378x: disabled
2000/01/01 1:01:13 400 s newcamd: initialized (fd=7, port=56781, crypted)
2000/01/01 1:01:13 400 s CAID: 1843
2000/01/01 1:01:13 400 s provid #0: 000000
2000/01/01 1:01:13 400 s cccam: disabled
2000/01/01 1:01:13 400 s radegast: disabled
2000/01/01 1:01:13 400 s http thread started
2000/01/01 1:01:13 400 s creating thread for device /dev/ttyUSB0
2000/01/01 1:01:13 402 h HTTP Server listening on port 40100
2000/01/01 1:01:13 803 r reader thread started (thread= 803, label=hdplus, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2000/01/01 1:01:13 400 s waiting for local card init
2000/01/01 1:01:15 803 r hdplus card detected
2000/01/01 1:01:23 803 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2000/01/01 1:01:24 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/01/06 14:49:49 803 r detect native nagra card
2011/01/06 14:50:03 803 r card system not supported
2011/01/06 14:50:03 803 r Normal mode failed, reverting to Deprecated Mode
2011/01/06 14:50:10 803 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2011/01/06 14:50:11 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/01/06 14:50:14 803 r detect native nagra card
2011/01/06 14:50:29 803 r card system not supported
2011/01/06 14:50:29 803 r card initializing error
2011/01/06 14:50:29 400 s init for all local cards done
2011/01/06 14:50:29 400 s anti cascading disabled
2011/01/06 14:50:29 C04 c client connected to 56781 port
2011/01/06 14:50:29 C04 c Connection closed to client
2011/01/06 14:50:29 C04 c thread C04 ended!
2011/01/06 14:50:29 1005 c client connected to 56781 port
2011/01/06 14:50:29 1005 c Connection closed to client
2011/01/06 14:50:29 1406 c client connected to 56781 port
2011/01/06 14:50:29 1807 c client connected to 56781 port
2011/01/06 14:50:29 1005 c thread 1005 ended!
2011/01/06 14:50:29 1406 c Connection closed to client
2011/01/06 14:50:29 1406 c thread 1406 ended!
2011/01/06 14:50:29 1807 c encrypted newcamd:56781-client 192.168.178.1 granted (4all_HDplus, au=hdplus)
2011/01/06 14:50:29 1807 c user 4all_HDplus authenticated successfully (CCcam)
2011/01/06 14:50:29 1807 c AU enabled for user 4all_HDplus on reader hdplus

Zurück zu Auto,Normal,T=0,0

Spoiler

>> OSCam << cardserver started at Sat Jan 1 01:01:13 2000
-------------------------------------------------------------------------------
2000/01/01 1:01:13 400 s version=1.00-unstable_svn, build #4162, system=mips-unknown-unknown, nice=-1
2000/01/01 1:01:13 400 s client max. idle=120 sec, debug level=0
2000/01/01 1:01:13 400 s max. logsize=2480 Kb
2000/01/01 1:01:13 400 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2000/01/01 1:01:13 400 s auth size=4800
2000/01/01 1:01:13 400 s services reloaded: 0 services freed, 6 services loaded
2000/01/01 1:01:13 400 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 1:01:13 400 s signal handling initialized (type=sysv)
2000/01/01 1:01:13 400 s 142 service-id's loaded
2000/01/01 1:01:13 400 s 145 tier-id's loaded
2000/01/01 1:01:13 400 s 882 provid's loaded
2000/01/01 1:01:13 400 s 22 lengths for caid guessing loaded
2000/01/01 1:01:13 400 s monitor: initialized (fd=6, port=988)
2000/01/01 1:01:13 400 s camd33: disabled
2000/01/01 1:01:13 400 s camd35: disabled
2000/01/01 1:01:13 400 s cs378x: disabled
2000/01/01 1:01:13 400 s newcamd: initialized (fd=7, port=56781, crypted)
2000/01/01 1:01:13 400 s CAID: 1843
2000/01/01 1:01:13 400 s provid #0: 000000
2000/01/01 1:01:13 400 s cccam: disabled
2000/01/01 1:01:13 400 s radegast: disabled
2000/01/01 1:01:13 400 s http thread started
2000/01/01 1:01:13 400 s creating thread for device /dev/ttyUSB0
2000/01/01 1:01:13 402 h HTTP Server listening on port 40100
2000/01/01 1:01:13 803 r reader thread started (thread= 803, label=hdplus, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2000/01/01 1:01:13 400 s waiting for local card init
2000/01/01 1:01:15 803 r hdplus card detected
2000/01/01 1:01:23 803 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2000/01/01 1:01:24 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2000/01/01 1:01:26 803 r detect native nagra card
2000/01/01 1:01:41 803 r card system not supported
2000/01/01 1:01:41 803 r Normal mode failed, reverting to Deprecated Mode
2011/01/06 15:27:40 803 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2011/01/06 15:27:41 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/01/06 15:27:43 803 r detect native nagra card
2011/01/06 15:28:00 803 r card system not supported
2011/01/06 15:28:00 803 r card initializing error
2011/01/06 15:28:01 400 s init for all local cards done
2011/01/06 15:28:01 400 s anti cascading disabled
2011/01/06 15:28:01 C04 c client connected to 56781 port
2011/01/06 15:28:01 C04 c Connection closed to client
2011/01/06 15:28:01 C04 c thread C04 ended!
2011/01/06 15:28:01 1005 c client connected to 56781 port
2011/01/06 15:28:01 1005 c Connection closed to client
2011/01/06 15:28:01 1005 c thread 1005 ended!
2011/01/06 15:28:01 1807 c client connected to 56781 port
2011/01/06 15:28:01 1807 c Connection closed to client
2011/01/06 15:28:01 1807 c thread 1807 ended!
2011/01/06 15:28:01 1406 c client connected to 56781 port
2011/01/06 15:28:01 1406 c Connection closed to client
2011/01/06 15:28:01 1406 c thread 1406 ended!
2011/01/06 15:28:06 1C04 c client connected to 56781 port
2011/01/06 15:28:06 1C04 c encrypted newcamd:56781-client 192.168.178.1 granted (4all_HDplus, au=hdplus)
2011/01/06 15:28:06 1C04 c user 4all_HDplus authenticated successfully (CCcam)
2011/01/06 15:28:06 1C04 c AU enabled for user 4all_HDplus on reader hdplus

Log oscam.conf mit Auto,Dreambox,T=0,0:

Spoiler

>> OSCam << cardserver started at Thu Jan 6 15:39:52 2011
-------------------------------------------------------------------------------
2011/01/06 15:39:52 400 s version=1.00-unstable_svn, build #4162, system=mips-unknown-unknown, nice=-1
2011/01/06 15:39:52 400 s client max. idle=120 sec, debug level=0
2011/01/06 15:39:52 400 s max. logsize=2480 Kb
2011/01/06 15:39:52 400 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/01/06 15:39:52 400 s auth size=4800
2011/01/06 15:39:52 400 s services reloaded: 0 services freed, 6 services loaded
2011/01/06 15:39:52 400 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/01/06 15:39:52 400 s signal handling initialized (type=sysv)
2011/01/06 15:39:52 400 s 142 service-id's loaded
2011/01/06 15:39:52 400 s 145 tier-id's loaded
2011/01/06 15:39:52 400 s 882 provid's loaded
2011/01/06 15:39:52 400 s 22 lengths for caid guessing loaded
2011/01/06 15:39:52 400 s monitor: initialized (fd=6, port=988)
2011/01/06 15:39:52 400 s camd33: disabled
2011/01/06 15:39:52 400 s camd35: disabled
2011/01/06 15:39:52 400 s cs378x: disabled
2011/01/06 15:39:52 400 s newcamd: initialized (fd=7, port=56781, crypted)
2011/01/06 15:39:52 400 s CAID: 1843
2011/01/06 15:39:52 400 s provid #0: 000000
2011/01/06 15:39:52 400 s cccam: disabled
2011/01/06 15:39:52 400 s radegast: disabled
2011/01/06 15:39:52 400 s http thread started
2011/01/06 15:39:52 400 s creating thread for device /dev/ttyUSB0
2011/01/06 15:39:52 402 h HTTP Server listening on port 40100
2011/01/06 15:39:52 803 r reader thread started (thread= 803, label=hdplus, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2011/01/06 15:39:52 400 s waiting for local card init
2011/01/06 15:39:54 803 r hdplus card detected
2011/01/06 15:40:04 803 r Error activating card.
2011/01/06 15:40:14 803 r Error activating card.
2011/01/06 15:40:24 803 r Error activating card.
2011/01/06 15:40:34 803 r Error activating card.
2011/01/06 15:40:45 803 r Error activating card.
2011/01/06 15:40:45 803 r card initializing error
2011/01/06 15:40:45 400 s init for all local cards done
2011/01/06 15:40:45 400 s anti cascading disabled
2011/01/06 15:40:45 C04 c client connected to 56781 port
2011/01/06 15:40:45 C04 c Connection closed to client
2011/01/06 15:40:45 C04 c thread C04 ended!
2011/01/06 15:40:45 1406 c client connected to 56781 port
2011/01/06 15:40:46 1406 c Connection closed to client
2011/01/06 15:40:46 1406 c thread 1406 ended!
2011/01/06 15:40:46 1005 c client connected to 56781 port
2011/01/06 15:40:46 1005 c Connection closed to client
2011/01/06 15:40:46 1005 c thread 1005 ended!
2011/01/06 15:40:52 1804 c client connected to 56781 port
2011/01/06 15:40:52 1804 c encrypted newcamd:56781-client 192.168.178.1 granted (4all_HDplus, au=hdplus)
2011/01/06 15:40:52 1804 c user 4all_HDplus authenticated successfully (CCcam)
2011/01/06 15:40:52 1804 c AU enabled for user 4all_HDplus on reader hdplus

Log oscam.conf mit Auto,Dreambox,T=1,0

Spoiler

>> OSCam << cardserver started at Sat Jan 1 01:01:13 2000
-------------------------------------------------------------------------------
2000/01/01 1:01:13 400 s version=1.00-unstable_svn, build #4162, system=mips-unknown-unknown, nice=-1
2000/01/01 1:01:13 400 s client max. idle=120 sec, debug level=0
2000/01/01 1:01:13 400 s max. logsize=2480 Kb
2000/01/01 1:01:13 400 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2000/01/01 1:01:13 400 s auth size=4800
2000/01/01 1:01:13 400 s services reloaded: 0 services freed, 6 services loaded
2000/01/01 1:01:13 400 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 1:01:13 400 s signal handling initialized (type=sysv)
2000/01/01 1:01:13 400 s 142 service-id's loaded
2000/01/01 1:01:13 400 s 145 tier-id's loaded
2000/01/01 1:01:13 400 s 882 provid's loaded
2000/01/01 1:01:13 400 s 22 lengths for caid guessing loaded
2000/01/01 1:01:13 400 s monitor: initialized (fd=6, port=988)
2000/01/01 1:01:13 400 s camd33: disabled
2000/01/01 1:01:13 400 s camd35: disabled
2000/01/01 1:01:13 400 s cs378x: disabled
2000/01/01 1:01:13 400 s newcamd: initialized (fd=7, port=56781, crypted)
2000/01/01 1:01:13 400 s CAID: 1843
2000/01/01 1:01:13 400 s provid #0: 000000
2000/01/01 1:01:13 400 s cccam: disabled
2000/01/01 1:01:13 400 s radegast: disabled
2000/01/01 1:01:13 400 s http thread started
2000/01/01 1:01:13 400 s creating thread for device /dev/ttyUSB0
2000/01/01 1:01:13 402 h HTTP Server listening on port 40100
2000/01/01 1:01:13 803 r reader thread started (thread= 803, label=hdplus, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2000/01/01 1:01:13 400 s waiting for local card init
2000/01/01 1:01:15 803 r hdplus card detected
2000/01/01 1:01:26 803 r Error activating card.
2000/01/01 1:01:37 803 r Error activating card.
2011/01/06 15:59:15 803 r Error activating card.
2011/01/06 15:59:26 803 r Error activating card.
2011/01/06 15:59:37 803 r Error activating card.
2011/01/06 15:59:38 803 r card initializing error
2011/01/06 15:59:38 400 s init for all local cards done
2011/01/06 15:59:38 400 s anti cascading disabled
2011/01/06 15:59:38 C04 c client connected to 56781 port
2011/01/06 15:59:38 C04 c Connection closed to client
2011/01/06 15:59:38 C04 c thread C04 ended!
2011/01/06 15:59:38 1005 c client connected to 56781 port
2011/01/06 15:59:38 1005 c Connection closed to client
2011/01/06 15:59:38 1406 c client connected to 56781 port
2011/01/06 15:59:38 1406 c Connection closed to client
2011/01/06 15:59:38 1406 c thread 1406 ended!
2011/01/06 15:59:38 1807 c client connected to 56781 port
2011/01/06 15:59:38 1807 c Connection closed to client
2011/01/06 15:59:38 1807 c thread 1807 ended!
2011/01/06 15:59:38 1C08 c client connected to 56781 port
2011/01/06 15:59:38 1C08 c encrypted newcamd:56781-client 192.168.178.1 granted (4all_HDplus, au=hdplus)
2011/01/06 15:59:38 1C08 c user 4all_HDplus authenticated successfully (CCcam)
2011/01/06 15:59:38 1C08 c AU enabled for user 4all_HDplus on reader hdplus
2011/01/06 15:59:38 1005 c thread 1005 ended!

So das war jetzt. Viel mehr Standardeinstellungen bei den Smargo gibts nicht mehr.

Hab die Fritz immer mit der Hammermethode ausgeschaltet, da gestern irgendwie mit dem Freetz-Reset der Wurm drin war. Oscam-Wi geht ...

Bin mal schnell wieder weg zum Geburtstagskaffee.

Melde mich dann wieder.........

Gruß
lustig63

 

[szonic]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Nicht gut, teste folgendes:

Fixed, 3.69,normal,0,0
oder
Fixed, 3.69,normal,1,0

Hast Du auch jedesmal den Server neu gestartet, mit SMargo und Karte drinnen? Wenn ja, so soll es auch sein!

Grüsse
szonic

 

[Skywalker]

AW: HS - Freetz, Cccam, Oscam mit zwei 910ern und HD+

Teste erst mal die Settings, die "szonic" dir vorgeschlagen hat. Wenn diese auch nicht funzen, mach mal dass:
Smargo einstellen auf:
AUTO
Normal
0
0
Der Fehler kann nämlich auch bei der OScam Version liegen.
Mit den neueren OScam binaries (1.00 build ....) läuft der Smargo nicht so gut. Da ist die easymouse2 der bessere Reader.
Ich würd mal vorschlagen, ne ältere Version zu nutzen. Das wird auch in anderen Boards immer wieder vorgeschlagen.
Z.B. diese hier Link ist nicht mehr aktiv.

Zum Einspielen der oscam bitte folgendes machen:
1. OScam im Freetz stoppen
2. die OScam aus dem Download per FTP ins Verzeichnis /var/media/ftp/uStor01/cs/oscam kopieren bzw. die bestehende damit ersetzen
3. hier jetzt die eingefügte Datei "oscam" mit Rechte 755 versehen
4. die FB mal rebooten, damit alles wirksam wird