Hilfe bei der Erstellung von CS Server

[Hirnelch]

Hallo also das ist der Log meines Kumpels

Spoiler: Oscam.log

>> OSCam << ymod cardserver started at Wed Oct 19 18:09:24 2016
-------------------------------------------------------------------------------
2016/10/19 18:09:24 1853 296BF000 s >> OSCam << ymod cardserver started, build #1853 (sh4-amino-linux)
2016/10/19 18:09:24 1853 296BF000 s version=ymod, build #1853, system=sh4-amino-linux, nice=-1
2016/10/19 18:09:24 1853 296BF000 s client max. idle=120 sec, debug level=0
2016/10/19 18:09:24 1853 296BF000 s max. logsize=100 Kb
2016/10/19 18:09:24 1853 296BF000 s client timeout=6000 ms, fallback timeout=3000 ms, fallbacks=1, cache delay=0 ms
2016/10/19 18:09:24 1853 296BF000 s services reloaded: 0 services freed, 4 services loaded
2016/10/19 18:09:24 1853 296BF000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/10/19 18:09:24 1853 296BF000 s signal handling initialized (type=sysv)
2016/10/19 18:09:24 1853 296BF000 s 195 service-id's loaded
2016/10/19 18:09:24 1853 296BF000 s can't open file "/var/keys//oscam.tiers" (err=2), no tier-id's loaded
2016/10/19 18:09:24 1853 296BF000 s can't open file "/var/keys//oscam.provid" (err=2), no provids's loaded
2016/10/19 18:09:24 1853 296BF000 s can't open file "/var/keys//oscam.ird" (errno=2) irdeto guessing not loaded
2016/10/19 18:09:24 1853 296BF000 s can't open file "/var/keys//oscam.keys" softcam keys not loaded
2016/10/19 18:09:24 1853 296BF000 s monitor: disabled
2016/10/19 18:09:24 1853 296BF000 s camd33: disabled
2016/10/19 18:09:24 1853 296BF000 s camd35: disabled
2016/10/19 18:09:24 1853 296BF000 s cs378x: disabled
2016/10/19 18:09:24 1853 296BF000 s newcamd: disabled
2016/10/19 18:09:24 1853 296BF000 s cccam: disabled
2016/10/19 18:09:24 1853 296BF000 s radegast: disabled
2016/10/19 18:09:24 1853 296BF000 s http thread started
2016/10/19 18:09:24 1853 296BF000 s creating thread for device xxx
2016/10/19 18:09:24 1853 296BF000 s loadbalancer: can't read from file /tmp/.oscam/stat
2016/10/19 18:09:24 1853 296BF000 s waiting for local card init
2016/10/19 18:09:24 1853 2AEBF4C8 p proxy thread started (thread=2AEBF4C8, label=cccam_server, server=xxx)
2016/10/19 18:09:24 1853 2A6BF4C8 h HTTP Server listening on port 88
2016/10/19 18:09:24 1853 296BF000 s init for all local cards done
2016/10/19 18:09:24 1853 296BF000 s anti cascading disabled
2016/10/19 18:09:24 1853 2B7194C8 c plain dvbapi-client granted (local, au=auto (1 reader))
2016/10/19 18:09:24 1853 2B7194C8 c dvbapi: can't open priority file /var/keys//oscam.dvbapi
2016/10/19 18:09:24 1853 2AEBF4C8 p connecting to xxx (port 31000, fd=12)
2016/10/19 18:09:24 1853 2AEBF4C8 p xxx: resolved ip=XXX
2016/10/19 18:09:25 1853 2B7194C8 c dvbapi: [ADD PID 0] CAID: 1861 ECM_PID: 19F5 PROVID: 000000
2016/10/19 18:09:25 1853 2B7194C8 c dvbapi: [ADD PID 1] CAID: 09C7 ECM_PID: 19F9 PROVID: 000000
2016/10/19 18:09:25 1853 2B7194C8 c dvbapi: [ADD PID 2] CAID: 09FD ECM_PID: 19F7 PROVID: 000000
2016/10/19 18:09:25 1853 2B7194C8 c dvbapi: new program number: C35C (RTL HD)
2016/10/19 18:09:25 1853 2B7194C8 c local (1861&000000/C35C/19F5/0000/89:B148/00-00): rejected group (0 ms) (no matching reader)
2016/10/19 18:09:25 1853 2B7194C8 c local (09C7&000000/C35C/19F9/0000/5E:8AD7/00-00): rejected group (0 ms) (no matching reader)
2016/10/19 18:09:25 1853 2B7194C8 c dvbapi: try pids again #1
2016/10/19 18:09:25 1853 2B7194C8 c local (09FD&000000/C35C/19F7/0000/3C3E5/00-00): rejected group (0 ms) (no matching reader)
2016/10/19 18:09:25 1853 2B7194C8 c local (1861&000000/C35C/19F5/0000/89:B148/00-00): rejected group (0 ms) (no matching reader)
2016/10/19 18:09:25 1853 2B7194C8 c local (09C7&000000/C35C/19F9/0000/5E:8AD7/00-00): rejected group (0 ms) (no matching reader)
2016/10/19 18:09:26 1853 2B7194C8 c dvbapi: try pids again #2
2016/10/19 18:09:26 1853 2B7194C8 c local (09FD&000000/C35C/19F7/0000/3C3E5/00-00): rejected group (0 ms) (no matching reader)
2016/10/19 18:09:26 1853 2B7194C8 c local (1861&000000/C35C/19F5/0000/89:B148/00-00): rejected group (0 ms) (no matching reader)
2016/10/19 18:09:26 1853 2B7194C8 c local (09C7&000000/C35C/19F9/0000/5E:8AD7/00-00): rejected group (1 ms) (no matching reader)
2016/10/19 18:09:26 1853 2B7194C8 c dvbapi: try pids again #3
2016/10/19 18:09:26 1853 2B7194C8 c dvbapi: can't decode channel
2016/10/19 18:09:26 1853 2B7194C8 c local (09FD&000000/C35C/19F7/0000/3C3E5/00-00): rejected group (0 ms) (no matching reader)

 

[supraracer]

2016/10/19 18:09:24 1853 296BF000 s cccam: disabled
...Gescheite OScam installieren ohne ymod Müll.

-supraracer

 

[pehedima]

Sorry,
aber da läuft nicht viel.

Erstmal zu einer gescheiten oscam wechseln und die gesamten Configs von deinem Kumpel posten.

 

[Hirnelch]

zu welchem Oscam soll ich denn wechseln? hab diesen hier aus dem webiterface gedownloaded vom receiver? könnt
ihr mir einen gescheite Oscam sagen ??

 

[supraracer]

sh4 gibts doch hier bei den Downloads...einfach auch mal selbst bisschen suchen, so schwer ist das nicht.
https://www.digital-eliteboard.com/resources/oscam-1-20-unstable_sh4-linux.2112/

-supraracer

 

[Hirnelch]

vielen lieben Dank also es funzt jetzt zwar aber des bild bleibt alle paar sekungen hängen und ruckelt da vllt noch eine möglichkeit ??

 

[Derek Buegel]

Jetzt wird es ein Ratespiel.
Ich schlage vor, noch mal die oscam Dateien von Server und Client zu posten. Ein log noch datzu.
Du kannst so lange mal einen Ping auf den Server laufen lassen.

MfG

 

[Hirnelch]

Kann es sein das es ruckelt wenn ich alle services aktiv hab aber nur hd plus noch nutze ?? Ich schau mir des alles morgen nochmal an evtl setz ich den receiver neu auf ?

 

[Derek Buegel]

Dann kommentiere die Services doch einfach aus (# davor).

MfG

 

[pehedima]

Was verstehst du an unseren Beiträgen nicht?

Poste bitte die geforderten Infos.
Ist die oscam jetzt gewechselt?
Welche Configs laufen bei deinem Kumpel?
Wie sieht jetzt das Logfile dort aus?

Alles andere ist doch nur ein Stochern mit der Stange im Nebel.

 

[Hirnelch]

Okay sry ich bin einfach am verzweifeln...
also ich habe

• OSCam r11274

jetzt am laufen

Server:

Spoiler: oscam.log

2016/10/19 21:35:39 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn-emu-, build r11274 (sh4-linux)
2016/10/19 21:35:39 00000000 s (main) System name = Linux
2016/10/19 21:35:39 00000000 s (main) Host name = spark7162
2016/10/19 21:35:39 00000000 s (main) Release = 2.6.32.61_stm24_0214
2016/10/19 21:35:39 00000000 s (main) Version = #1 PREEMPT Tue Nov 4 17:56:32 CET 2014
2016/10/19 21:35:39 00000000 s (main) Machine = sh4
2016/10/19 21:35:39 00000000 s (main) Stb model = spark7162
2016/10/19 21:35:39 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 12953
2016/10/19 21:35:39 00000000 s (config) services reloaded: 0 services freed, 4 services loaded, rejected 0
2016/10/19 21:35:39 00000000 s [Emu] oscam-emu version 732
2016/10/19 21:35:39 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2016/10/19 21:35:39 00000000 s (main) signal handling initialized
2016/10/19 21:35:39 00000000 s (config) 195 service-id's loaded in 16 ms
2016/10/19 21:35:39 00000000 s (net) monitor: initialized (fd=5, port=16000)
2016/10/19 21:35:39 00000000 s (net) cccam: initialized (fd=6, port=31000)
2016/10/19 21:35:39 00000000 s (reader) g09 [internal] creating thread for device /dev/sci0
2016/10/19 21:35:39 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/10/19 21:35:39 00000000 s (main) waiting for local card init
2016/10/19 21:35:39 5307FD04 r (reader) g09 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2016/10/19 21:35:39 5307FD04 r (reader) g09 [internal] Reader sci internal, detected box type: spark7162
2016/10/19 21:35:39 5307FD04 r (reader) g09 [internal] card detected
2016/10/19 21:35:39 4370551D h (webif) webif: decompressed 175192 bytes back into 430048 bytes
2016/10/19 21:35:39 4370551D h (webif) HTTP Server running. ip=0.0.0.0 port=8088
2016/10/19 21:35:41 5307FD04 r (reader) g09 [internal] ATR: XXX
2016/10/19 21:35:41 5307FD04 r (reader) g09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2016/10/19 21:35:41 5307FD04 r (reader) g09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2016/10/19 21:35:41 5307FD04 r (reader) g09 [internal] Buffers readed 0 bytes total time_us 78919
2016/10/19 21:35:42 5307FD04 r (reader) g09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2016/10/19 21:35:43 5307FD04 r (reader) g09 [internal] Card type: KLPV
2016/10/19 21:35:43 5307FD04 r (reader) g09 [internal] Rom version: 10LM
2016/10/19 21:35:44 5307FD04 r (reader) g09 [internal] Credit available on card: 0 euro
2016/10/19 21:35:44 5307FD04 r (reader) g09 [internal] FuseByte: 25
2016/10/19 21:35:44 5307FD04 r (reader) g09 [internal] Region Code: DEU00001
2016/10/19 21:35:44 5307FD04 r (reader) g09 [internal] Country Code: DEU
2016/10/19 21:35:45 5307FD04 r (reader) g09 [internal] Pincode read: 9553
2016/10/19 21:35:45 5307FD04 r (reader) g09 [internal] PCB settings: FF FF FF FF
2016/10/19 21:35:45 5307FD04 r (reader) g09 [internal] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2016/10/19 21:35:45 5307FD04 r (reader) g09 [internal] serial: ########, BoxID: ########, baseyear: 2004
2016/10/19 21:35:45 5307FD04 r (reader) g09 [internal] ready for requests
2016/10/19 21:35:45 5307FD04 r (reader) g09 [internal] found card system videoguard2
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] card detected
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] ------------------------------------------------------------------
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] +---------+----------+---------------------+---------------------+
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] |-- 00 ---|-- 00fa --| 2017/01/10-00:00:00 |
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] |-- 00 ---|-- 00f3 --| 2017/01/10-00:00:00 |
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] |-- 00 ---|-- 00f4 --| 2017/01/10-00:00:00 |
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] |-- 00 ---|-- 00fe --| 2017/01/10-00:00:00 |
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] |-- 01 ---|-- 0101 --| 2017/01/10-00:00:02 |
2016/10/19 21:35:45 5307FD04 r (reader) g09 [videoguard2] |-- 01 ---|-- 0133 --| 2017/01/10-00:00:02 |
2016/10/19 21:35:46 5307FD04 r (reader) g09 [videoguard2] ------------------------------------------------------from-ins70--
2016/10/19 21:35:47 00000000 s (main) init for all local cards done
2016/10/19 21:35:47 00000000 s (emmcache) loaded 371 emmcache records from /tmp/.oscam/oscam.emmcache in 20 ms
2016/10/19 21:35:47 00000000 s (emmcache) loaded 2 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
2016/10/19 21:35:47 00000000 s (anticasc) anti cascading disabled
2016/10/19 21:35:47 4CE7AE6A c (client) plain dvbapi-client granted (local, au=on (1 reader))
2016/10/19 21:35:47 4CE7AE6A c (dvbapi) dvbapi channelcache loaded from /var/keys/oscam.ccache
2016/10/19 21:35:47 4CE7AE6A c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2 maximum amount of possible filters is 11 (oscam limit is 32)
2016/10/19 21:35:50 4CE7AE6A c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1861 ECM_PID: 19F5 PROVID: 000000
2016/10/19 21:35:50 4CE7AE6A c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C7 ECM_PID: 19F9 PROVID: 000000
2016/10/19 21:35:50 4CE7AE6A c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09FD ECM_PID: 19F7 PROVID: 000000
2016/10/19 21:35:50 4CE7AE6A c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in caPMT
2016/10/19 21:35:50 4CE7AE6A c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 1
2016/10/19 21:35:50 4CE7AE6A c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 19F9 ANY CHID PMTPID 0068 VPID 19F1
2016/10/19 21:35:50 4CE7AE6A c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in PMT

Spoiler: Oscam.conf

[global]
usrfile = /var/log/oscamuser.log
logfile = /var/log/oscam.log
cwlogdir = /var/log/cw
failbantime = 3600
failbancount = 2
nice = -1
maxlogsize = 1500
lb_nfb_readers = 3
lb_reopen_seconds = 200
saveinithistory = 1

[monitor]
port = 16000
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 4
appendchaninfo = 1


[cccam]
port = 31000
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.3.0
minimizecards = 0
keepconnected = 1
stealth = 1
reshare_mode = 0

[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = local
pmt_mode = 0
request_mode = 0

[webif]
httpport = 8088
httphelplang = de
httpuser = XXX
httppwd = XXX
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

Spoiler: oscam.user

[account]
user = local
group = 1
monlevel = 0
au = g09


[account]
user = XXX
pwd = XXX
group = 1
uniq = 1

Spoiler: oscam.server

[reader]
label = g09
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 09C7
boxid = 12345678
detect = cd
mhz = 500
group = 1
emmcache = 1,3,2,0

[reader]
label = emulator
enable = 0
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

Client:

Spoiler: Oscam.conf

[global]
usrfile = /var/log/oscamuser.log
logfile = /var/log/oscam.log
cwlogdir = /var/log/cw
failbantime = 3600
failbancount = 2
nice = -1
maxlogsize = 1500
lb_nfb_readers = 3
lb_reopen_seconds = 200
saveinithistory = 1

[monitor]
port = 16000
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 4
appendchaninfo = 1


[cccam]
port = 31000
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.3.0
minimizecards = 0
keepconnected = 1
stealth = 1
reshare_mode = 0

[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = local
pmt_mode = 0
request_mode = 0

[webif]
httpport = 8088
httphelplang = de
httpuser = XXX
httppwd = XXX
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

Spoiler: Oscam.server

[reader]
label = cccam KD
protocol = cccam
device = XXX
user = XXX
password = XXX
inactivitytimeout = 30
group = 1
dropbadcws = 1
cccversion = 2.3.0
ccckeepalive = 1
audisabled = 1

mein client ist jetzt nicht mehr erreichbar aber bild war von ihm vorhin da, des ruckeln ist bei mir ca. alle 10 sek. bleibt das Bild hängen vielen Dank euch

Rechte muss ich doch bei allen Daten auf 755 setzen ?

 

[Derek Buegel]

Das kannst Du aus der oscam.conf, beim Client, löschen. Das Protookll legst Du beim Client in der oscam.server fest. [cccam] ist das Sharingprotoikoll des Servers.

Spoiler

[cccam]
port = 27000
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.3.0
minimizecards = 0
keepconnected = 1
stealth = 1
reshare_mode = 0

Die Aussetzer sind beim Server?

Welche oscam Version nutzen Server und Client? Braucht Du den EMU?
Ich würde eine ohne EMU (falls nicht benötigt) und ohne ymot empfehlen.

MfG

 

[HarryHase]

Wie immer würde ich ohne services, whitelusten und sonstiges weglassen.
Dann würde ich noch cs378x statt ccc verwenden. Wenn das läuft weiter verfeinern

Alles raus was nicht gebraucht wird und saubere oscam selbst kompilieren oder vom hier/ streamboard nehmen

 

[Hirnelch]

Job Aussetzer sind beim server...ich benutze cccam 2.3.0, den emu hab ich auf aus geschaltet.
wenn ich cs378x benutze hat dann mein client trotzdem den

Spoiler: Oscam.server

[reader]
label = cccam KD
protocol = cccam
device = XXX
user = XXX
password = XXX
inactivitytimeout = 30
group = 1
dropbadcws = 1
cccversion = 2.3.0
ccckeepalive = 1
audisabled = 1

oder ein anderes Protokoll. Ich denke eher das Problem liegt bei den server einstellungen und ich dachte ohne services bekomme ich keine Aktivierung ?

 

[HarryHase]

wer erzählt denn sowas?

Du musst die Protokolle auf beiden Seiten einstellen