Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Hier ein paar Infos zu meiner Oscam

    Nobody is reading this thread right now.
AW: Hier ein paar Infos zu meiner Oscam

dmesg:
Boxtype: Vip1vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
Registering device 'sc', major '169'
vcc = 5 -> Set ClassAVersion of smartcard driver: [1.0.1]
Setting clock to: 3.57Mhz
clkdiv = 0x0E
PHY: 0:02 - Link is Up - 100/Full
LED level = 1
[AVS]: avs_command_kernel (10)
[AVS]: avs_command_kernel (10)
LED level = 1
[AVS]: avs_command_kernel (5)
[AVS]: avs_command_kernel (11)
[AVS]: avs_command_kernel (4103)
stmhdmiio_set_audio_source - 8b8b0000
stmfb: Starting HDMI Output hdmi = 8b8b0000
stmfb: Starting HDMI Output hdmi = 8b8b0000
LED level = 1
LED level = 1
[AVS]: avs_command_kernel (4104)
pti_hal_set_source(): 0, 32
ATR wasn't read
f is set to 5
Setting clock to: 3.69Mhz
clkdiv = 0x0D
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 3 -> Set ClassBvcc = 3 -> Set ClassBf is set to 5
Setting clock to: 3.69Mhz
clkdiv = 0x0D
getBuffer(): free = 2
pti_buffer_get(385024) => 8b06c528
(da 0, 4)(da 0, 6)LED level = 1
LED level = 1
LED level = 1
webif bleibt beim letzten Eintrag stehn:
2000/01/01 01:00:42 0 s >> OSCam << cardserver started, version 1.20-EMU-HDSC build #60-9053 (sh4-linux)
2000/01/01 01:00:42 0 s The current system time is smaller than the build date (Nov 24 2013). Waiting up to 60 seconds for time to correct
2000/01/01 01:01:43 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:01:43 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2000/01/01 01:01:43 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:01:43 0 s signal handling initialized
2000/01/01 01:01:43 0 s 187 service-id's loaded in 14ms
2000/01/01 01:01:43 0 s 79 tier-id's loaded
2000/01/01 01:01:43 0 s 13 provid's loaded
2000/01/01 01:01:43 0 s skyv14 [internal] creating thread for device /dev/sci1
2000/01/01 01:01:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 01:01:43 0 s waiting for local card init
2000/01/01 01:01:43 4FFB70 r skyv14 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=369)
2000/01/01 01:01:43 5105D0 h webif: decompressed 232529 bytes back into 338968 bytes
2000/01/01 01:01:43 5105D0 h HTTP Server running. ip=0.0.0.0 port=8888
2000/01/01 01:01:44 4FFB70 r skyv14 [internal] card detected
2000/01/01 01:01:44 4FFB70 r skyv14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2000/01/01 01:01:44 4FFB70 r skyv14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2000/01/01 01:01:44 4FFB70 r skyv14 [internal] Calculated work ETU is 18.60 us reader mhz = 500
2000/01/01 01:01:45 4FFB70 r skyv14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
 
AW: Hier ein paar Infos zu meiner Oscam

stell mal mhz auf 369 um , mal sehen obs was bringt
 
AW: Hier ein paar Infos zu meiner Oscam

leider nicht
2014/12/31 15:38:46 0 s >> OSCam << cardserver started, version 1.20-EMU-HDSC build #60-9053 (sh4-linux)
2014/12/31 15:38:46 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2014/12/31 15:38:46 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/12/31 15:38:46 0 s signal handling initialized
2014/12/31 15:38:46 0 s 187 service-id's loaded in 8ms
2014/12/31 15:38:46 0 s 79 tier-id's loaded
2014/12/31 15:38:46 0 s 13 provid's loaded
2014/12/31 15:38:46 0 s skyv14 [internal] creating thread for device /dev/sci1
2014/12/31 15:38:46 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/31 15:38:46 0 s waiting for local card init
2014/12/31 15:38:46 4FFAE0 r skyv14 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=369, cardmhz=369)
2014/12/31 15:38:46 5105D8 h webif: decompressed 232529 bytes back into 338968 bytes
2014/12/31 15:38:46 5105D8 h HTTP Server running. ip=0.0.0.0 port=8888
2014/12/31 15:38:47 4FFAE0 r skyv14 [internal] card detected
2014/12/31 15:38:48 4FFAE0 r skyv14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/31 15:38:48 4FFAE0 r skyv14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/12/31 15:38:48 4FFAE0 r skyv14 [internal] Calculated work ETU is 25.20 us reader mhz = 369
2014/12/31 15:38:49 4FFAE0 r skyv14 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/31 15:38:54 4FFAE0 r skyv14 [internal] card system not supported
2014/12/31 15:38:54 4FFAE0 r skyv14 [internal] Normal mode failed, reverting to Deprecated Mode
2014/12/31 15:38:54 4FFAE0 r skyv14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/31 15:38:54 4FFAE0 r skyv14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/12/31 15:38:54 4FFAE0 r skyv14 [internal] Calculated work ETU is 100.81 us reader mhz = 369
2014/12/31 15:38:55 4FFAE0 r skyv14 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/31 15:38:56 4FFAE0 r skyv14 [internal] card system not supported
2014/12/31 15:38:56 4FFAE0 r skyv14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/12/31 15:38:56 4FFAE0 r skyv14 [internal] card initializing error
2014/12/31 15:38:56 0 s init for all local cards done
2014/12/31 15:38:56 0 s anti cascading disabled
2014/12/31 15:38:56 54E8A8 c plain dvbapi-client granted (local-hdfreak, au=auto (1 reader))
2014/12/31 15:38:56 54E8A8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/12/31 15:38:58 54E8A8 c [DVBAPI] Receiver sends PMT command 3 for channel 0017
2014/12/31 15:38:58 54E8A8 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2014/12/31 15:38:58 54E8A8 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2014/12/31 15:38:58 54E8A8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2014/12/31 15:38:58 54E8A8 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2014/12/31 15:38:58 54E8A8 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2014/12/31 15:38:58 54E8A8 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/12/31 15:38:58 54E8A8 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000
2014/12/31 15:38:58 54E8A8 c New program number: 0017 (Sky Krimi) [pmt_list_management 3]
2014/12/31 15:38:58 54E8A8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
 
AW: Hier ein paar Infos zu meiner Oscam

ok hab dir noch einen hochgeladen, stell bitte mhz wieder auf 500 um und cardmhz auf 369, dann mal sehen was der treiber macht
 
AW: Hier ein paar Infos zu meiner Oscam

der bleibt leider hier hängen.

webif:
2000/01/01 01:00:42 0 s >> OSCam << cardserver started, version 1.20-EMU-HDSC build #60-9053 (sh4-linux)
2000/01/01 01:00:42 0 s The current system time is smaller than the build date (Nov 24 2013). Waiting up to 60 seconds for time to correct
2000/01/01 01:01:43 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:01:43 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2000/01/01 01:01:43 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:01:43 0 s signal handling initialized
2000/01/01 01:01:43 0 s 187 service-id's loaded in 26ms
2000/01/01 01:01:43 0 s 79 tier-id's loaded
2000/01/01 01:01:43 0 s 13 provid's loaded
2000/01/01 01:01:43 0 s skyv14 [internal] creating thread for device /dev/sci1
2000/01/01 01:01:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 01:01:43 0 s waiting for local card init
2000/01/01 01:01:43 4FFB70 r skyv14 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=369)
2000/01/01 01:01:43 4FFB70 r skyv14 [internal] card detected
2000/01/01 01:01:43 5105D0 h webif: decompressed 232529 bytes back into 338968 bytes
2000/01/01 01:01:43 5105D0 h HTTP Server running. ip=0.0.0.0 port=8888
2000/01/01 01:01:44 4FFB70 r skyv14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2000/01/01 01:01:44 4FFB70 r skyv14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2000/01/01 01:01:44 4FFB70 r skyv14 [internal] Calculated work ETU is 18.60 us reader mhz = 500
2000/01/01 01:01:45 4FFB70 r skyv14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)

- - - - - - - - - -

jetzt hat er doch weitergemacht
2000/01/01 01:01:43 5105D0 h HTTP Server running. ip=0.0.0.0 port=8888
2000/01/01 01:01:44 4FFB70 r skyv14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2000/01/01 01:01:44 4FFB70 r skyv14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2000/01/01 01:01:44 4FFB70 r skyv14 [internal] Calculated work ETU is 18.60 us reader mhz = 500
2000/01/01 01:01:45 4FFB70 r skyv14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/12/31 15:52:28 4FFB70 r skyv14 [internal] card system not supported
2014/12/31 15:52:28 4FFB70 r skyv14 [internal] Normal mode failed, reverting to Deprecated Mode
2014/12/31 15:52:28 4FFB70 r skyv14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/31 15:52:28 4FFB70 r skyv14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/12/31 15:52:28 4FFB70 r skyv14 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/12/31 15:52:29 4FFB70 r skyv14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/12/31 15:52:34 4FFB70 r skyv14 [internal] card system not supported
2014/12/31 15:52:34 4FFB70 r skyv14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/12/31 15:52:34 4FFB70 r skyv14 [internal] card initializing error
2014/12/31 15:52:34 0 s init for all local cards done
2014/12/31 15:52:34 0 s anti cascading disabled
2014/12/31 15:52:34 54EA80 c plain dvbapi-client granted (local-hdfreak, au=auto (1 reader))
2014/12/31 15:52:34 54EA80 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/12/31 15:52:37 54EA80 c [DVBAPI] Receiver sends PMT command 3 for channel 0017
2014/12/31 15:52:37 54EA80 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2014/12/31 15:52:37 54EA80 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2014/12/31 15:52:37 54EA80 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2014/12/31 15:52:37 54EA80 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2014/12/31 15:52:37 54EA80 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2014/12/31 15:52:37 54EA80 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/12/31 15:52:37 54EA80 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000
2014/12/31 15:52:37 54EA80 c New program number: 0017 (Sky Krimi) [pmt_list_management 3]
2014/12/31 15:52:37 54EA80 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

- - - - - - - - - -

dmesg:
Boxtype: Vip1vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
Registering device 'sc', major '169'
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
Version of smartcard driver: [1.0.1]
clkdiv = 0x0E
PHY: 0:02 - Link is Up - 100/Full
LED level = 1
[AVS]: avs_command_kernel (10)
LED level = 1
[AVS]: avs_command_kernel (5)
[AVS]: avs_command_kernel (11)
[AVS]: avs_command_kernel (4103)
stmfb: Starting HDMI Output hdmi = 8b210000
stmhdmiio_set_audio_source - 8b210000
stmfb: Starting HDMI Output hdmi = 8b210000
LED level = 1
LED level = 1
[AVS]: avs_command_kernel (4104)
pti_hal_set_source(): 0, 32
ATR wasn't read
f is set to 5
Setting clock to: 5.00Mhz
clkdiv = 0x0A
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 3 -> Set ClassBgetBuffer(): free = 2
pti_buffer_get(385024) => 8b072528
(da 0, 3)vcc = 3 -> Set ClassBf is set to 5
Setting clock to: 5.00Mhz
clkdiv = 0x0A
(da 0, 6)LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
f is set to 5
Setting clock to: 5.00Mhz
clkdiv = 0x0A
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 3 -> Set ClassBvcc = 3 -> Set ClassBf is set to 5
Setting clock to: 5.00Mhz
clkdiv = 0x0A
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1

sorry, hatte dir eben den falschen dmesg gepostet.
 
AW: Hier ein paar Infos zu meiner Oscam

stell mal beide auf 369 um bitte
 
AW: Hier ein paar Infos zu meiner Oscam

mit dem gleichen Treiber?

hab ich gemacht:

webif:
2014/12/31 16:04:25 0 s >> OSCam << cardserver started, version 1.20-EMU-HDSC build #60-9053 (sh4-linux)
2014/12/31 16:04:25 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2014/12/31 16:04:25 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/12/31 16:04:25 0 s signal handling initialized
2014/12/31 16:04:25 0 s 187 service-id's loaded in 11ms
2014/12/31 16:04:25 0 s 79 tier-id's loaded
2014/12/31 16:04:25 0 s 13 provid's loaded
2014/12/31 16:04:25 0 s skyv14 [internal] creating thread for device /dev/sci1
2014/12/31 16:04:25 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/31 16:04:25 0 s waiting for local card init
2014/12/31 16:04:25 4FFB70 r skyv14 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=369, cardmhz=369)
2014/12/31 16:04:25 5105D0 h webif: decompressed 232529 bytes back into 338968 bytes
2014/12/31 16:04:25 5105D0 h HTTP Server running. ip=0.0.0.0 port=8888
2014/12/31 16:04:26 4FFB70 r skyv14 [internal] card detected
2014/12/31 16:04:26 4FFB70 r skyv14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/31 16:04:26 4FFB70 r skyv14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/12/31 16:04:26 4FFB70 r skyv14 [internal] Calculated work ETU is 25.20 us reader mhz = 369
2014/12/31 16:04:27 4FFB70 r skyv14 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/31 16:04:32 4FFB70 r skyv14 [internal] card system not supported
2014/12/31 16:04:32 4FFB70 r skyv14 [internal] Normal mode failed, reverting to Deprecated Mode
2014/12/31 16:04:32 4FFB70 r skyv14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/31 16:04:32 4FFB70 r skyv14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/12/31 16:04:32 4FFB70 r skyv14 [internal] Calculated work ETU is 100.81 us reader mhz = 369
2014/12/31 16:04:33 4FFB70 r skyv14 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/31 16:04:34 4FFB70 r skyv14 [internal] card system not supported
2014/12/31 16:04:34 4FFB70 r skyv14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/12/31 16:04:34 4FFB70 r skyv14 [internal] card initializing error
2014/12/31 16:04:34 0 s init for all local cards done
2014/12/31 16:04:34 0 s anti cascading disabled
2014/12/31 16:04:34 54E998 c plain dvbapi-client granted (local-hdfreak, au=auto (1 reader))
2014/12/31 16:04:34 54E998 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
 
AW: Hier ein paar Infos zu meiner Oscam

is schon komisch der macht genau das was er soll aber will einfach die blöde karte nicht fressen

hab dir noch einen hochgeladen teste den mal auch noch
 
AW: Hier ein paar Infos zu meiner Oscam

Ich glaubs nicht !!!!!!!!!! :emoticon-0157-sun:

es klappt, du bist echt der King. Kannst du auch kurz erklären was du gemacht hast?

Danke schonmal
 
AW: Hier ein paar Infos zu meiner Oscam

na das was ich am besten kann, am treiber source rumfuschen ich lad dir gleich noch einen hoch den du bitte testen könntest für mich und poste mir derweile von diesen ein dmesg und die zeiten der karte bitte

der neue ist hochgeladen, bitte aber erst das dmesg dessen den du gerade verwendest... dann von den neuen nochmals bitte
 
AW: Hier ein paar Infos zu meiner Oscam

mit diesem Treiber:

webif:
2014/12/31 16:33:41 0 s >> OSCam << cardserver started, version 1.20-EMU-HDSC build #60-9053 (sh4-linux)
2014/12/31 16:33:41 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2014/12/31 16:33:42 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/12/31 16:33:42 0 s signal handling initialized
2014/12/31 16:33:42 0 s 187 service-id's loaded in 12ms
2014/12/31 16:33:42 0 s 79 tier-id's loaded
2014/12/31 16:33:42 0 s 13 provid's loaded
2014/12/31 16:33:42 0 s skyv14 [internal] creating thread for device /dev/sci1
2014/12/31 16:33:42 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/31 16:33:42 0 s waiting for local card init
2014/12/31 16:33:42 5105C8 r skyv14 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=369, cardmhz=369)
2014/12/31 16:33:42 4FFAE0 h webif: decompressed 232529 bytes back into 338968 bytes
2014/12/31 16:33:42 4FFAE0 h HTTP Server running. ip=0.0.0.0 port=8888
2014/12/31 16:33:43 5105C8 r skyv14 [internal] card detected
2014/12/31 16:33:43 5105C8 r skyv14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/31 16:33:43 5105C8 r skyv14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/12/31 16:33:43 5105C8 r skyv14 [internal] Calculated work ETU is 25.20 us reader mhz = 369
2014/12/31 16:33:44 5105C8 r skyv14 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/31 16:33:45 5105C8 r skyv14 [internal] Card type: P1TV
2014/12/31 16:33:45 5105C8 r skyv14 [internal] Rom version: 20AA
2014/12/31 16:33:45 5105C8 r skyv14 [internal] parental lock setting: FF FF FF FF
2014/12/31 16:33:45 5105C8 r skyv14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/12/31 16:33:45 5105C8 r skyv14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/12/31 16:33:45 5105C8 r skyv14 [internal] ready for requests
2014/12/31 16:33:45 5105C8 r skyv14 [internal] found card system videoguard2
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] card detected
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 0046, expiry date: 2015/02/26-00:00:00 HDplus [NDS]
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 007b, expiry date: 2015/02/26-00:00:00 NDS Unknown
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 007d, expiry date: 2015/02/26-00:00:00 Sky Sport [NDS]
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 008e, expiry date: 2015/02/26-00:00:00 Beate Uhse [NDS]
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 00c0, expiry date: 2015/02/26-00:00:00 Sky Welt Extra [NDS]
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 00c7, expiry date: 2015/02/26-00:00:00 Sky Welt [NDS]
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 00c8, expiry date: 2015/02/26-00:00:00 Sky Film [NDS]
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 00c9, expiry date: 2015/02/26-00:00:00 Sky Welt HD [NDS]
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 00ca, expiry date: 2015/02/26-00:00:00 Sky Film HD [NDS]
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 00cb, expiry date: 2015/02/26-00:00:00 Sky Sport HD [NDS]
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 00f3, expiry date: 2015/02/26-00:00:00 Blue Movie Info [NDS]
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 00fa, expiry date: 2015/02/26-00:00:00 NDS Unknown
2014/12/31 16:33:45 5105C8 r skyv14 [videoguard2] tier: 00ff, expiry date: 2015/02/26-00:00:00
2014/12/31 16:33:50 0 s init for all local cards done
2014/12/31 16:33:50 0 s anti cascading disabled
2014/12/31 16:33:50 54E998 c plain dvbapi-client granted (local-hdfreak, au=auto (1 reader))
2014/12/31 16:33:50 54E998 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/12/31 16:33:52 54E998 c [DVBAPI] Receiver sends PMT command 3 for channel 0017
2014/12/31 16:33:52 54E998 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2014/12/31 16:33:52 54E998 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2014/12/31 16:33:52 54E998 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2014/12/31 16:33:52 54E998 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2014/12/31 16:33:52 54E998 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2014/12/31 16:33:52 54E998 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/12/31 16:33:52 54E998 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000
2014/12/31 16:33:52 54E998 c New program number: 0017 (Sky Krimi) [pmt_list_management 3]
2014/12/31 16:33:52 54E998 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID VPID 01FF
2014/12/31 16:33:53 54E998 c local-hdfreak (098C&000000/01FB/0017/98:5BC0E2A09A222CBCDEA6F6A30A94ADE2): found (168 ms) by skyv14 - Sky Krimi
2014/12/31 16:33:53 54E998 c local-hdfreak (098C&000000/01FB/0017/98:9C7F5DD8BA96B7D442FA2CBCFFA0C456): found (157 ms) by skyv14 - Sky Krimi
2014/12/31 16:34:00 54E998 c local-hdfreak (098C&000000/01FB/0017/98:FF034420F90368759B9B1AE7D0DE5B49): found (148 ms) by skyv14 - Sky Krimi
2014/12/31 16:34:06 54E998 c [DVBAPI] Receiver sends PMT command 3 for channel 007C
2014/12/31 16:34:06 54E998 c [ADD PID 0] CAID: 1833 ECM_PID: 1819 PROVID: 000000
2014/12/31 16:34:06 54E998 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B19 PROVID: 000000
2014/12/31 16:34:06 54E998 c [ADD PID 2] CAID: 098C ECM_PID: 1A19 PROVID: 000000
2014/12/31 16:34:06 54E998 c Found 3 ECMpids and 4 STREAMpids in PMT
2014/12/31 16:34:06 54E998 c [DVBAPI] Receiver wants to demux srvid 007C on adapter 0000 camask 0001 index 0000
2014/12/31 16:34:06 54E998 c New program number: 007C (FOX HD) [pmt_list_management 3]
2014/12/31 16:34:06 54E998 c [DVBAPI] Demuxer #0 trying to descramble PID #2 CAID 098C PROVID 000000 ECMPID 1A19 ANY CHID VPID 03FF
2014/12/31 16:34:06 54E998 c local-hdfreak (098C&000000/100E/007C/98:A8E2C1801EDBF4834887C68B7253219A): found (149 ms) by skyv14 - FOX HD
2014/12/31 16:34:07 54E998 c local-hdfreak (098C&000000/100E/007C/98:56CA9E2BFBAB5ABD68F696B24DCCB9A5): found (148 ms) by skyv14 - FOX HD
2014/12/31 16:34:14 54E998 c local-hdfreak (098C&000000/100E/007C/98:06DACB3372DE696B73717F05A90C2F9A): found (150 ms) by skyv14 - FOX HD
2014/12/31 16:34:21 54E998 c local-hdfreak (098C&000000/100E/007C/98:E0486D5DE832E3E5B96328E0C6457D1E): found (157 ms) by skyv14 - FOX HD
2014/12/31 16:34:28 54E998 c local-hdfreak (098C&000000/100E/007C/98:CBAE8B8663F28C2F6D313332828BC791): found (153 ms) by skyv14 - FOX HD
2014/12/31 16:34:35 54E998 c local-hdfreak (098C&000000/100E/007C/98:28DA2854ED968BC0E92E9D0D54FDBA67): found (147 ms) by skyv14 - FOX HD
2014/12/31 16:34:42 54E998 c local-hdfreak (098C&000000/100E/007C/98:2E37EDF30ED3CF39B1940568960E9489): found (150 ms) by skyv14 - FOX HD
2014/12/31 16:34:49 54E998 c local-hdfreak (098C&000000/100E/007C/98:42B97D4ED39485B84D5E278380CEE7E6): found (152 ms) by skyv14 - FOX HD
2014/12/31 16:34:56 54E998 c local-hdfreak (098C&000000/100E/007C/98:500332FE562A8DC111D35D135DC1EECF): found (154 ms) by skyv14 - FOX HD
2014/12/31 16:35:03 54E998 c local-hdfreak (098C&000000/100E/007C/98:BB7E5422AAE1BCAC9B923BF7EB02E526): found (152 ms) by skyv14 - FOX HD
2014/12/31 16:35:10 54E998 c local-hdfreak (098C&000000/100E/007C/98:6ECC5605016CFA10A7EF9B8F7B605631): found (149 ms) by skyv14 - FOX HD
dmesg:
Boxtype: Vip1vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
Registering device 'sc', major '169'
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
Version of smartcard driver: [1.0.1]
clkdiv = 0x0E
PHY: 0:02 - Link is Up - 100/Full
LED level = 1
[AVS]: avs_command_kernel (10)
[AVS]: avs_command_kernel (10)
LED level = 1
[AVS]: avs_command_kernel (5)
[AVS]: avs_command_kernel (11)
[AVS]: avs_command_kernel (4103)
stmfb: Starting HDMI Output hdmi = 8b9d0000
stmhdmiio_set_audio_source - 8b9d0000
stmfb: Starting HDMI Output hdmi = 8b9d0000
LED level = 1
LED level = 1
[AVS]: avs_command_kernel (4104)
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8bd35528
(da 0, 3)(da 0, 6)ATR wasn't read
f is set to 5
Setting clock to: 5.00Mhz
clkdiv = 0x0A
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 3 -> Set ClassBvcc = 3 -> Set ClassBf is set to 3
Setting clock to: 3.57Mhz
clkdiv = 0x0E
LED level = 1
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
[AVS]: avs_command_kernel (10)
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
f is set to 5
Setting clock to: 5.00Mhz
clkdiv = 0x0A
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 3 -> Set ClassBvcc = 3 -> Set ClassBf is set to 3
Setting clock to: 3.57Mhz
clkdiv = 0x0E
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
f is set to 5
Setting clock to: 5.00Mhz
clkdiv = 0x0A
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 3 -> Set ClassBvcc = 3 -> Set ClassBf is set to 3
Setting clock to: 3.57Mhz
clkdiv = 0x0E
LED level = 1
LED level = 1
pti_buffer_free(8bd35528, 385024) - delta 0x 5cce8, thr 0x1
freeBuffer(): free = 2
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8bd35528
pti_buffer_free(8bd35528, 385024) - delta 0x 48794, thr 0x1
freeBuffer(): free = 2
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8bd35528
(da 0, 1)(da 0, 2)
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
pti_buffer_free(8bd35528, 385024) - delta 0x 58b8c, thr 0x1
freeBuffer(): free = 2
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8bd35528
LED level = 1
(da 0, 4)(da 0, 6)
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
[AVS]: avs_command_kernel (10)
pti_buffer_free(8bd35528, 385024) - delta 0x 18248, thr 0x1
freeBuffer(): free = 2
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8bd35528
(da 0, 1)(da 0, 2)
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
[AVS]: avs_command_kernel (10)
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
f is set to 5
Setting clock to: 5.00Mhz
clkdiv = 0x0A
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 3 -> Set ClassBvcc = 3 -> Set ClassBf is set to 3
Setting clock to: 3.57Mhz
clkdiv = 0x0E
LED level = 1
pti_buffer_free(8bd35528, 385024) - delta 0x 563e4, thr 0x1
freeBuffer(): free = 2
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8bd35528
(da 0, 1)(da 0, 2)
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
LED level = 1
[AVS]: avs_command_kernel (10)
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1

Zeiten sind also wie erwartet bei 150ms

- - - - - - - - - -

hast du den neuen Treiber schon hochgeladen?
 
AW: Hier ein paar Infos zu meiner Oscam

ja der neue ist schon online, die 150 sind vollkommen ok für den argus denk ich, wenn der neue nun auch geht kann ich die änderungen ins git laden und du kannst mit dem nds wert spielen um sie noch was schneller zu bekommen
 
AW: Hier ein paar Infos zu meiner Oscam

bitte kurze Erklärung "mit dem nds-Wert spielen"

hätte auch noch ne andre Frage, würde gerne lauter und leiser auf die Tasten links und rechts auf der Fernbedienung legen, geht das?

die neue Datei funzt nicht

dmesg:
Boxtype: Vip1vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
Registering device 'sc', major '169'
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
Version of smartcard driver: [1.0.1]
clkdiv = 0x0E
PHY: 0:02 - Link is Up - 100/Full
LED level = 1
[AVS]: avs_command_kernel (10)
LED level = 1
[AVS]: avs_command_kernel (5)
[AVS]: avs_command_kernel (11)
[AVS]: avs_command_kernel (4103)
stmhdmiio_set_audio_source - 8b050000
stmfb: Starting HDMI Output hdmi = 8b050000
stmfb: Starting HDMI Output hdmi = 8b050000
LED level = 1
LED level = 1
[AVS]: avs_command_kernel (4104)
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8b1dc528
(da 0, 3)(da 0, 6)ATR wasn't read
f is set to 5
Setting clock to: 5.00Mhz
clkdiv = 0x0A
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 3 -> Set ClassBLED level = 1
LED level = 1
LED level = 1
LED level = 1
 
AW: Hier ein paar Infos zu meiner Oscam

geht denn der neue treiber ? ja das auf links rechts legen geht , erkläre ich dir dann !

mit dem nds spielen meine ich in der oscam.server beim v14 reader folgendes ergänzen

ins7e11=15
und diesen wert verringern wenn die zeiten schlechter geworden sind dadurch
 
AW: Hier ein paar Infos zu meiner Oscam

hast du die karte nochmal kurz gezogen und wieder neu gesteckt im argus nach dem reboot ? manchmal klappt das einlesen nicht auf anhieb, eigentlich muss der neue gehen, nochmal nen oscam restart gemacht
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

M
DM8000 und V14 ?
Antworten
5
Aufrufe
237
telecomic
L
gelöst OScam mit HD05 komisches Verhalten / Bild dunkel
2
Antworten
25
Aufrufe
1K
d2z
S
gelöst V23 Vodafone Smartcard nicht mehr hell
2
Antworten
22
Aufrufe
2K
starsurfer
G
  • Gesperrt
gelöst ORF Karte via OSCam freischalten mitTvHeadend
2
Antworten
23
Aufrufe
623
wiscal
A
gelöst UM02 Karte geht mit Oscam nicht mehr
2 3
Antworten
31
Aufrufe
1K
AKGR
A
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…