Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Hier ein paar Infos zu meiner Oscam

    Nobody is reading this thread right now.
AW: Hier ein paar Infos zu meiner Oscam

das heisst der Treiber stellt den Reader auf 3.57 Mhz anstatt auf 3.69?
 
AW: Hier ein paar Infos zu meiner Oscam

so ist es und deshalb geht die karte nicht an da die mehr braucht.
 
AW: Hier ein paar Infos zu meiner Oscam

ich hab dir den treiber nochmal neu hochgeladen , versuch es bitte mit dem , achte drauf das du zwischen dem raufkopieren und neustarten genug zeit dem stick giebst und am besten den alten erst löschen und dann den neuen kopieren, bitte wieder mit dmesg
 
AW: Hier ein paar Infos zu meiner Oscam

ist das richtig, dass die Datei nicht ausführbar ist? Bei den Dateirechten steht: -rw-r--r--
 
AW: Hier ein paar Infos zu meiner Oscam

ja das ist egal treiber dürfen immer geladen werden ob mit oder ohne rechte
 
AW: Hier ein paar Infos zu meiner Oscam

LED level = 1
LED level = 1
[AVS]: avs_command_kernel (4104)
ATR wasn't read
Setting clock to: 5.00Mhz
clkdiv = 0x0A
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 3 -> Set ClassBpti_hal_set_source(): 0, 32
vcc = 3 -> Set ClassBSetting clock to: 5.00Mhz
clkdiv = 0x0A
getBuffer(): free = 2
pti_buffer_get(385024) => 8b193528
(da 0, 3)(da 0, 6)Setting clock to: 5.00Mhz
clkdiv = 0x0A
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clkdiv = 0x0E
vcc = 3 -> Set ClassBLED level = 1
vcc = 3 -> Set ClassBSetting clock to: 5.00Mhz
clkdiv = 0x0A
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
 
AW: Hier ein paar Infos zu meiner Oscam

gut das war leider auch nix, hab dir noch einen hochgeladen, hoffe da geht mehr, bitte wieder mit dmesg

habs gerade nochmal schnell geändert , von dem brauch ich definitiv ne dmesg
 
Zuletzt bearbeitet:
AW: Hier ein paar Infos zu meiner Oscam

[AVS]: avs_command_kernel (4104)
pti_hal_set_source(): 0, 32
ATR wasn't read
Setting clock to: 5.00Mhz
clock = <NULL>clkdiv = 0x16
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
getBuffer(): free = 2
pti_buffer_get(385024) => 8ad08528
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
(da 0, 3)(da 0, 6)vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
LED level = 1
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassASetting clock to: 5.00Mhz
clock = <NULL>clkdiv = 0x16
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassASetting clock to: 5.00Mhz
clock = <NULL>clkdiv = 0x16
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassALED level = 1
ATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassALED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
 
AW: Hier ein paar Infos zu meiner Oscam

kannst du den nach meiner änderung bitte nochmal nehmen ?! hatte da zwischenzeitlich noch was geändert
 
AW: Hier ein paar Infos zu meiner Oscam

oki, bist der beste
 
AW: Hier ein paar Infos zu meiner Oscam

No MAC Management Counters available
Boxtype: Vip1vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Registering device 'sc', major '169'
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Version of smartcard driver: [1.0.1]
PHY: 0:02 - Link is Up - 100/Full
LED level = 1
[AVS]: avs_command_kernel (10)
[AVS]: avs_command_kernel (10)
LED level = 1
[AVS]: avs_command_kernel (5)
[AVS]: avs_command_kernel (11)
[AVS]: avs_command_kernel (4103)
stmhdmiio_set_audio_source - 8acc0000
stmfb: Starting HDMI Output hdmi = 8acc0000
stmfb: Starting HDMI Output hdmi = 8acc0000
LED level = 1
LED level = 1
[AVS]: avs_command_kernel (4104)
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8b0d2528
(da 0, 3)(da 0, 6)ATR wasn't read
f is set to 5
Setting clock to: 5.00Mhz
clock = <NULL>clkdiv = 0x16
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
LED level = 1
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
warning: `vsftpd' uses 32-bit capabilities (legacy support in use)
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAf is set to 5
Setting clock to: 5.00Mhz
clock = <NULL>clkdiv = 0x16
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAf is set to 5
Setting clock to: 5.00Mhz
clock = <NULL>clkdiv = 0x16
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassALED level = 1
ATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassAATR wasn't read
f is set to 0
Setting clock to: 0.00Mhz
clock = <NULL>clkdiv = 0x0C
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
clock = <NULL>clkdiv = 0x1A
Setting clock to: 6.25Mhz
clock = <NULL>clkdiv = 0x14
vcc = 5 -> Set ClassALED level = 1

- - - - - - - - - -

webif:
2014/12/31 15:05:27 0 s >> OSCam << cardserver started, version 1.20-EMU-HDSC build #60-9053 (sh4-linux)
2014/12/31 15:05:27 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2014/12/31 15:05:27 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/12/31 15:05:27 0 s signal handling initialized
2014/12/31 15:05:27 0 s 187 service-id's loaded in 9ms
2014/12/31 15:05:27 0 s 79 tier-id's loaded
2014/12/31 15:05:27 0 s 13 provid's loaded
2014/12/31 15:05:27 0 s skyv14 [internal] creating thread for device /dev/sci1
2014/12/31 15:05:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/31 15:05:27 0 s waiting for local card init
2014/12/31 15:05:27 4FFB70 r skyv14 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=369)
2014/12/31 15:05:28 5105E0 h webif: decompressed 232529 bytes back into 338968 bytes
2014/12/31 15:05:28 5105E0 h HTTP Server running. ip=0.0.0.0 port=8888
2014/12/31 15:05:28 4FFB70 r skyv14 [internal] card detected
2014/12/31 15:05:39 4FFB70 r skyv14 [internal] Error activating card.
2014/12/31 15:05:59 0 --- Skipped 2 duplicated log lines ---
2014/12/31 15:05:59 4FFB70 r skyv14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/12/31 15:05:59 4FFB70 r skyv14 [internal] card initializing error
2014/12/31 15:06:00 0 s init for all local cards done
2014/12/31 15:06:00 0 s anti cascading disabled
2014/12/31 15:06:00 54E5E8 c plain dvbapi-client granted (local-hdfreak, au=auto (1 reader))
2014/12/31 15:06:00 54E5E8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/12/31 15:06:04 54E5E8 c [DVBAPI] Receiver sends PMT command 3 for channel 0017
2014/12/31 15:06:04 54E5E8 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2014/12/31 15:06:04 54E5E8 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2014/12/31 15:06:04 54E5E8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2014/12/31 15:06:04 54E5E8 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2014/12/31 15:06:04 54E5E8 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2014/12/31 15:06:04 54E5E8 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/12/31 15:06:04 54E5E8 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000
2014/12/31 15:06:04 54E5E8 c New program number: 0017 (Sky Krimi) [pmt_list_management 3]
2014/12/31 15:06:04 54E5E8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/31 15:06:04 54E5E8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/12/31 15:06:04 54E5E8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
 
AW: Hier ein paar Infos zu meiner Oscam

ok versuch den nächsten jetzt, der wird uns eventuell nen wenig mehr infos bringen
 
AW: Hier ein paar Infos zu meiner Oscam

ich drück uns die Daumen ^^
 
AW: Hier ein paar Infos zu meiner Oscam

du sagst mir bitte bescheid, wenn du die neue hochgeladen hast.
 
AW: Hier ein paar Infos zu meiner Oscam

das hab ich bereits ich warte nur auf dein dmesg log
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

M
DM8000 und V14 ?
Antworten
5
Aufrufe
237
telecomic
L
gelöst OScam mit HD05 komisches Verhalten / Bild dunkel
2
Antworten
25
Aufrufe
1K
d2z
S
gelöst V23 Vodafone Smartcard nicht mehr hell
2
Antworten
22
Aufrufe
2K
starsurfer
G
  • Gesperrt
gelöst ORF Karte via OSCam freischalten mitTvHeadend
2
Antworten
23
Aufrufe
623
wiscal
A
gelöst UM02 Karte geht mit Oscam nicht mehr
2 3
Antworten
31
Aufrufe
1K
AKGR
A
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…