Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

HD02 zum laufen bekommen

    Nobody is reading this thread right now.
H

Hummelflug

Newbie
Registriert
23. Februar 2015
Beiträge
26
Reaktionspunkte
9
Punkte
3
Hallo Gemeinde,

ich stoße leider an meine Grenzen und brauche bitte eure Hilfe. Kurzversion:


  • V14 mit dazugebuchtem HD+ in Duo2 und Oscam
  • „Änderung“ Sky macht alles dunkel
  • für die HD+ Sender eine HD2 gekauft, lt. Verkäufer „Karte wurde noch nicht aktiviert und hat ein Guthaben von 12 Monaten“. Kann ich aber nicht prüfen.

Hab versucht, nach dieser Anleitung https://www.digital-eliteboard.com/399489-v14-hd01-oscam-verwenden.html die Karte in Betrieb zu kriegen, was mir aber nicht gelingt.

oscam.services hatte ich gar nicht. Hab ich über Notepad++ erstellt. Die oscam.conf sieht im V14- Teil bei mir anders aus, wobei ich mir aber dachte, daß das nicht das Problem sein sollte.

Nach dem Neustart des Oscam trotzdem alle HD+- Sender dunkel. Oscam meldet mir bei Readers unter hd02 „ERROR
Sie müssen registriert sein, um Links zu sehen.
“

Bei HD+ habe ich die Servicehotline angerufen und eine Freischaltung erbeten, wie in #90 https://www.digital-eliteboard.com/...-hd01-oscam-verwenden-quot-9.html#post2950941 beschrieben. Da wurde mir gesagt, es gäbe keine Freischaltung, der Hotliner wollte nicht mal die Seriennummer der Karte wissen, ich solle nur den Receiver 10 min auf Pro7 HD stehen lassen und dann käme automatisch die Freischaltung. Erfolg: Null.

Würde mir bitte jemand helfen? Und ich sag das gleich jetzt, ich bin im Anfänger- Level.

Schönen Sonntag an alle!
Georg
 
Zuletzt bearbeitet von einem Moderator:
AW: HD02 zum laufen bekommen

hi,
ERROR heißt das die Karte nicht eingelesen wird, da hilft dann keine Freischaltung

welche Hardware nutzt du überhaupt?
welche OScam Version?
 
AW: HD02 zum laufen bekommen

dann poste bitte auch deine Configs hier in SPOILERN und ein log ab start der OScam
 
AW: HD02 zum laufen bekommen

zum testen kanst du sauberes cccam 2.3.0 oder scam nehmen , dann wirst du wenigstens wisen ob die karte funktioniert

wenn du mit cccam oder scam bild bekommst heist es das die karte ok ist , aufgeladen , und funktioniert , danach kanst du weiter mit oscam spielen bis du wider ein bild bekommst
 
AW: HD02 zum laufen bekommen

Zuerst noch zu den Karten. V14 oben, HD+ unten im Reader.

oscam.conf
[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 1500
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /etc/tuxbox/config
lb_mode = 0

[dvbapi]
enabled = 1
au = 1
user = dvbapi_local
boxtype = dreambox


[webif]
httpport = 83
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1
httposcamlabel = Oscam WebInterface


oscam.server
[reader]
label = SKY_DE_V1X
description = V13 or V14 (NDS)
caid = 09C4,098C
boxid = 12345678
detect = cd
emmcache = 1,2,2
ins7e11 = 14
ndsversion = 2
saveemm-u = 1
saveemm-unknown = 1
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
mhz = 534
cardmhz = 357
protocol = internal
device = /dev/sci0
group = 1

[reader]
label = hd02
protocol = internal
device = /dev/sci1
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
autospeed = 1
detect = cd
emmcache = 1,1,2
group = 2


oscam.services
[hdplus]
caid = 098C
srvid = 0002,2777,30D4,277E,EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,2E9B,151A,157F,157C,1581,EF78,2774,2EAF

oscam.user
[account]
user = local
au = v14,hd01
group = 1,2
 
AW: HD02 zum laufen bekommen

log?
- Caid schon mal Falsch
- MHZ und CARDMHZ anpassen

Code: 
[COLOR=#333333][reader][/COLOR]
[COLOR=#333333]label = hd02[/COLOR]
[COLOR=#333333]protocol = internal[/COLOR]
[COLOR=#333333]device = /dev/sci1[/COLOR]
[COLOR=#ff0000]caid = 1843[/COLOR]
[COLOR=#333333]boxkey = A7642F57BC96D37C[/COLOR]
[COLOR=#333333]rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
[/COLOR][COLOR=#ff0000]mhz = 540
autospeed = 0
cardmhz = 2700[/COLOR]
[COLOR=#333333]detect = cd[/COLOR]
[COLOR=#333333]emmcache = 1,1,2[/COLOR]
[COLOR=#333333]group = 2[/COLOR]

beim Account
Code: 
[COLOR=#333333][account][/COLOR]
[COLOR=#333333]user = [/COLOR][COLOR=#ff0000]dvbapi_local[/COLOR][COLOR=#333333][/COLOR]
[COLOR=#333333]au = v14,[/COLOR][COLOR=#ff0000]hd02[/COLOR][COLOR=#333333][/COLOR]
[COLOR=#333333]group = 1,2[/COLOR]
 
AW: HD02 zum laufen bekommen

Habe die Änderung in oscam.server und oscam.user eingetragen, „ERROR
Sie müssen registriert sein, um Links zu sehen.
“ bleibt. Was meinst Du mit log? Den Live-Log? Da steht mitten im Text "Error activating card", weswegen ich auch die Aktivierung per Hotline anstoßen wollte.

  • 2016/06/05 13:08:39 00000000 s (main) Host name = vuduo2
  • 2016/06/05 13:08:39 00000000 s (main) Release = 3.13.5
  • 2016/06/05 13:08:39 00000000 s (main) Version = #1 SMP Wed Oct 21 17:14:49 CEST 2015
  • 2016/06/05 13:08:39 00000000 s (main) Machine = mips
  • 2016/06/05 13:08:39 00000000 s (main) Stb model = dm8000
  • 2016/06/05 13:08:39 00000000 s (main) Stb vumodel = vuduo2
  • 2016/06/05 13:08:39 00000000 s (main) Stb boxtype = vuduo2
  • 2016/06/05 13:08:39 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 16075
  • 2016/06/05 13:08:39 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
  • 2016/06/05 13:08:39 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2016/06/05 13:08:39 00000000 s (main) signal handling initialized
  • 2016/06/05 13:08:39 00000000 s (reader) SKY_DE_V1X [internal] creating thread for device /dev/sci0
  • 2016/06/05 13:08:39 00000000 s (reader) hd02 [internal] creating thread for device /dev/sci1
  • 2016/06/05 13:08:39 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
  • 2016/06/05 13:08:39 17E344BC r (reader) hd02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
  • 2016/06/05 13:08:39 17E344BC r (reader) hd02 [internal] Reader sci internal, detected box type: vuduo2
  • 2016/06/05 13:08:39 00000000 s (emmcache) loaded 1 emmcache records from /etc/tuxbox/config/oscam.emmcache in 1 ms
  • 2016/06/05 13:08:39 1B926724 r (reader) SKY_DE_V1X [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
  • 2016/06/05 13:08:39 1B926724 r (reader) SKY_DE_V1X [internal] Reader sci internal, detected box type: vuduo2
  • 2016/06/05 13:08:39 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam.emmstat in 0 ms
  • 2016/06/05 13:08:39 00000000 s (anticasc) anti cascading disabled
  • 2016/06/05 13:08:39 1DC3A7FB h (webif) webif: decompressed 166195 bytes back into 397160 bytes
  • 2016/06/05 13:08:39 1DC3A7FB h (webif) HTTP Server running. ip=0.0.0.0 port=83
  • 2016/06/05 13:08:39 7ECA4976 c (client) plain dvbapi-client granted (dvbapi_local, au=on (1 reader))
  • 2016/06/05 13:08:39 7ECA4976 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
  • 2016/06/05 13:08:39 7ECA4976 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
  • 2016/06/05 13:08:40 17E344BC r (reader) hd02 [internal] card detected
  • 2016/06/05 13:08:40 1B926724 r (reader) SKY_DE_V1X [internal] card detected
  • 2016/06/05 13:08:40 17E344BC r (reader) hd02 [internal] ATR: 00 00
  • 2016/06/05 13:08:40 17E344BC r (reader) hd02 [internal] ERROR: Could not read reader->convention
  • 2016/06/05 13:08:40 17E344BC r (reader) hd02 [internal] Error activating card.
  • 2016/06/05 13:08:41 1B926724 r (reader) SKY_DE_V1X [internal] ATR: 3F FD 14 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2016/06/05 13:08:41 1B926724 r (reader) SKY_DE_V1X [internal] Init card protocol T0, FI=1, F=372, D=8, N=2
  • 2016/06/05 13:08:41 1B926724 r (reader) SKY_DE_V1X [internal] Calculated work ETU is 10.33 us reader mhz = 450
  • 2016/06/05 13:08:42 17E344BC r (reader) hd02 [internal] ATR: 00 00
  • 2016/06/05 13:08:42 17E344BC r (reader) hd02 [internal] ERROR: Could not read reader->convention
  • 2016/06/05 13:08:42 17E344BC r (reader) hd02 [internal] Error activating card.
  • 2016/06/05 13:08:43 17E344BC r (reader) hd02 [internal] ATR: 00 00
  • 2016/06/05 13:08:43 17E344BC r (reader) hd02 [internal] ERROR: Could not read reader->convention
  • 2016/06/05 13:08:43 17E344BC r (reader) hd02 [internal] Error activating card.
  • 2016/06/05 13:08:44 1B926724 r (reader) SKY_DE_V1X [internal] Buffers readed 0 bytes total time_us 3099704
  • 2016/06/05 13:08:44 17E344BC r (reader) hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2016/06/05 13:08:44 17E344BC r (reader) hd02 [internal] card initializing error
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0492 length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0c pid: 0498 length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 087b length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 13ed length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 13ee length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 13ef length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f0 length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f1 length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f2 length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f4 length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 1434 length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 found 0 ECMpids and 11 STREAMpids in caPMT
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 serving srvid 283D (FFFE@000000:283D unknown) on adapter 0000 camask 0001 index 0000 pmtpid 13EC
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0492 length: 5)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0c pid: 0498 length: 3)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 087b length: 14)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 13ed length: 3)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 13ee length: 9)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 13ef length: 16)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f0 length: 10)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f1 length: 13)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f2 length: 12)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f4 length: 0)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 1434 length: 14)
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 found 0 ECMpids and 11 STREAMpids in PMT
  • 2016/06/05 13:08:44 7ECA4976 c (dvbapi) Demuxer 0 serving srvid 283D (FFFE@000000:283D unknown) on adapter 0000 camask 0001 index 0000 pmtpid 13EC
  • 2016/06/05 13:08:44 1B926724 r (reader) SKY_DE_V1X [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
  • 2016/06/05 13:08:45 1B926724 r (reader) SKY_DE_V1X [internal] Card type: P1TV
  • 2016/06/05 13:08:45 1B926724 r (reader) SKY_DE_V1X [internal] Rom version: 20AA
  • 2016/06/05 13:08:45 1B926724 r (reader) SKY_DE_V1X [internal] Credit available on card: 0 euro
  • 2016/06/05 13:08:45 1B926724 r (reader) SKY_DE_V1X [internal] Extended 4C detected
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [internal] FuseByte: 05
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [internal] Region Code: 00BO0102
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [internal] Country Code: DEU
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [internal] Pincode read: 3407
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [internal] PCB settings: FF FF FF FF
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [internal] Parental control disabled
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [internal] serial: ########, BoxID: ########, baseyear: 2004
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [internal] ready for requests
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [internal] found card system videoguard2
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] card detected
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] ------------------------------------------------------------------
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] +---------+----------+---------------------+---------------------+
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 007b --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 007d --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 0081 --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 008e --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00c0 --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00c8 --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00c9 --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00ca --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00c7 --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00d4 --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00e4 --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00e5 --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00f0 --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00fa --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00f3 --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00ff --| 2016/07/06-01:00:00 |
  • 2016/06/05 13:08:46 1B926724 r (reader) SKY_DE_V1X [videoguard2] ------------------------------------------------------from-ins70--
 
AW: HD02 zum laufen bekommen

Karte falsch rum drin ... ???
im log steht halt ERROR da oscam die nicht einlesen kann ...
 
AW: HD02 zum laufen bekommen

Das wäre der Gag! Karte steckt drin wie die V14, Chip unten und hinten.
 
AW: HD02 zum laufen bekommen

dann nimm die mal raus und stecke die in den v14 slot, die v14 draußen lassen, Reader für die sky Karte aus, beim HD02 Reader DEVICE anpassen
 
AW: HD02 zum laufen bekommen

Ändert an der Fehlermeldung nichts.

  • 2016/06/05 13:24:23 00000000 s (main) Host name = vuduo2
  • 2016/06/05 13:24:23 00000000 s (main) Release = 3.13.5
  • 2016/06/05 13:24:23 00000000 s (main) Version = #1 SMP Wed Oct 21 17:14:49 CEST 2015
  • 2016/06/05 13:24:23 00000000 s (main) Machine = mips
  • 2016/06/05 13:24:23 00000000 s (main) Stb model = dm8000
  • 2016/06/05 13:24:23 00000000 s (main) Stb vumodel = vuduo2
  • 2016/06/05 13:24:23 00000000 s (main) Stb boxtype = vuduo2
  • 2016/06/05 13:24:23 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 19337
  • 2016/06/05 13:24:23 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
  • 2016/06/05 13:24:23 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2016/06/05 13:24:23 00000000 s (main) signal handling initialized
  • 2016/06/05 13:24:23 00000000 s (reader) hd02 [internal] creating thread for device /dev/sci0
  • 2016/06/05 13:24:23 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
  • 2016/06/05 13:24:23 00000000 s (emmcache) loaded 1 emmcache records from /etc/tuxbox/config/oscam.emmcache in 0 ms
  • 2016/06/05 13:24:23 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam.emmstat in 1 ms
  • 2016/06/05 13:24:23 00000000 s (anticasc) anti cascading disabled
  • 2016/06/05 13:24:23 17E344BC h (webif) webif: decompressed 166195 bytes back into 397160 bytes
  • 2016/06/05 13:24:23 1B926724 r (reader) hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
  • 2016/06/05 13:24:23 1B926724 r (reader) hd02 [internal] Reader sci internal, detected box type: vuduo2
  • 2016/06/05 13:24:23 4766A770 c (client) plain dvbapi-client granted (dvbapi_local, au=on (1 reader))
  • 2016/06/05 13:24:23 4766A770 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
  • 2016/06/05 13:24:23 17E344BC h (webif) HTTP Server running. ip=0.0.0.0 port=83
  • 2016/06/05 13:24:23 4766A770 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
  • 2016/06/05 13:24:24 1B926724 r (reader) hd02 [internal] card detected
  • 2016/06/05 13:24:24 1B926724 r (reader) hd02 [internal] ATR: 00 00
  • 2016/06/05 13:24:24 1B926724 r (reader) hd02 [internal] ERROR: Could not read reader->convention
  • 2016/06/05 13:24:24 1B926724 r (reader) hd02 [internal] Error activating card.
  • 2016/06/05 13:24:25 1B926724 r (reader) hd02 [internal] ATR: 00 00
  • 2016/06/05 13:24:25 1B926724 r (reader) hd02 [internal] ERROR: Could not read reader->convention
  • 2016/06/05 13:24:25 1B926724 r (reader) hd02 [internal] Error activating card.
  • 2016/06/05 13:24:26 1B926724 r (reader) hd02 [internal] ATR: 00 00
  • 2016/06/05 13:24:26 1B926724 r (reader) hd02 [internal] ERROR: Could not read reader->convention
  • 2016/06/05 13:24:26 1B926724 r (reader) hd02 [internal] Error activating card.
  • 2016/06/05 13:24:26 1B926724 r (reader) hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2016/06/05 13:24:26 1B926724 r (reader) hd02 [internal] card initializing error
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0492 length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0c pid: 0498 length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 087b length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 13ed length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 13ee length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 13ef length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f0 length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f1 length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f2 length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f4 length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 1434 length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 found 0 ECMpids and 11 STREAMpids in caPMT
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 serving srvid 283D (FFFE@000000:283D unknown) on adapter 0000 camask 0001 index 0000 pmtpid 13EC
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0492 length: 5)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0c pid: 0498 length: 3)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 087b length: 14)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 13ed length: 3)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 13ee length: 9)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 13ef length: 16)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f0 length: 10)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f1 length: 13)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f2 length: 12)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 13f4 length: 0)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 1434 length: 14)
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 found 0 ECMpids and 11 STREAMpids in PMT
  • 2016/06/05 13:24:28 4766A770 c (dvbapi) Demuxer 0 serving srvid 283D (FFFE@000000:283D unknown) on adapter 0000 camask 0001 index 0000 pmtpid 13EC
 
AW: HD02 zum laufen bekommen

  • 2016/06/05 13:24:24 1B926724 r (reader) hd02 [internal] card detected
  • 2016/06/05 13:24:24 1B926724 r (reader) hd02 [internal] ATR: 00 00
  • 2016/06/05 13:24:24 1B926724 r (reader) hd02 [internal] ERROR: Could not read reader->convention
Zum Vergrößern anklicken....
entweder ist die Karte defekt oder Falsch rum drin da die ATR nicht ausgelesen werden kann, teste anders rum mal ...
oder auch mit einer anderen Cam ... v14 dabei DRAUßEN lassen
 
AW: HD02 zum laufen bekommen

Chip oben, Chip unten, Karte oben, Karte unten, immer derselbe Fehler:

  • 2016/06/05 13:53:00 1B926724 r (reader) hd02 [internal] ATR: 00 00
  • 2016/06/05 13:53:00 1B926724 r (reader) hd02 [internal] ERROR: Could not read reader->convention
  • 2016/06/05 13:53:00 1B926724 r (reader) hd02 [internal] Error activating card.
 
AW: HD02 zum laufen bekommen

dann tippe ich mal das die Karte im A... ist,
teste aber noch eine andere Cam ...
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

N
gelöst DM7020HD: Benötige Unterstützung zum Wechsel von HD02 CCcam zu UM02 Oscam
Antworten
6
Aufrufe
604
Nudnick
N
gelöst Bekomme ORF im Irdeto-Mode nicht zum Laufen
3 4 5
Antworten
61
Aufrufe
3K
Kind regards
gelöst Orf und HD02 auf E2 Box Vu Ultimo 4K bisschen kompliziert da Smargo und interner Reader verwendet werden soll
Antworten
2
Aufrufe
1K
Pike_Bishop
P
  • Gesperrt
DAZN und verschiedene andere Sender bleiben dunkel
2 3
Antworten
34
Aufrufe
8K
Pilot
P
M
gelöst Probleme mit OsCam (HD+) nach Neustart
2 3
Antworten
30
Aufrufe
4K
micha47259
M
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…