HD02 OSCAM Startet nicht

[Joker@Deu]

Moin,
habe folgendes Problem.
Habe an meiner Gigablue HD800 solo nen Server mit der v14 am laufen. Karte steckt im internen Reader. Läuft auch alles tip top.
Nun ist bei meinen S** Abo das Gratisjahr abgelaufen und ich wollte meine HD02 (gerade erneut mit SCAM "Freigeschalten"/ da kommt Bild)
Allerdings möchte sie einfach unter OSCAM nicht laufen. Habt ihr da vielleicht ne Idee?
Hab den Log schon gegoogelt, den HD02 server nach mehreren Configs umgestellt, aber es wird nicht hellt...

Log

Spoiler

• 2016/02/29 15:52:31 63F84ECB r (reader) hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/02/29 15:52:33 63F84ECB r (reader) hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2016/02/29 15:52:33 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75258
• 2016/02/29 15:52:34 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75222
• 2016/02/29 15:52:36 63F84ECB r (reader) hdplus [mouse] ATR:
• 2016/02/29 15:52:36 63F84ECB r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/02/29 15:52:36 63F84ECB r (reader) hdplus [mouse] Setting baudrate to 115200 bps
• 2016/02/29 15:52:36 63F84ECB r (reader) hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
• 2016/02/29 15:52:36 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75221
• 2016/02/29 15:52:36 63F84ECB r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2016/02/29 15:52:37 63F84ECB r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
• 2016/02/29 15:52:39 63F84ECB r (reader) hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/02/29 15:52:40 63F84ECB r (reader) hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2016/02/29 15:52:40 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75243
• 2016/02/29 15:52:42 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75221
• 2016/02/29 15:52:43 63F84ECB r (reader) hdplus [mouse] ATR:
• 2016/02/29 15:52:43 63F84ECB r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/02/29 15:52:43 63F84ECB r (reader) hdplus [mouse] Setting baudrate to 115200 bps
• 2016/02/29 15:52:43 63F84ECB r (reader) hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
• 2016/02/29 15:52:43 00000000 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10976 (mipsel-unknown-linux-gnu)
• 2016/02/29 15:52:43 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75228
• 2016/02/29 15:52:43 63F84ECB r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2016/02/29 15:52:45 63F84ECB r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
• 2016/02/29 15:52:45 63F84ECB r (reader) hdplus [mouse] card system not supported
• 2016/02/29 15:52:45 63F84ECB r (reader) hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
• 2016/02/29 15:52:45 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75238
• 2016/02/29 15:52:46 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75215
• 2016/02/29 15:52:47 63F84ECB r (reader) hdplus [mouse] ATR:
• 2016/02/29 15:52:47 63F84ECB r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/02/29 15:52:47 63F84ECB r (reader) hdplus [mouse] Calculated work ETU is 101.09 us reader mhz = 368
• 2016/02/29 15:52:47 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75217
• 2016/02/29 15:52:47 63F84ECB r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2016/02/29 15:52:49 63F84ECB r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
• 2016/02/29 15:52:50 63F84ECB r (reader) hdplus [mouse] detect native nagra card
• 2016/02/29 15:52:51 63F84ECB r (reader) hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/02/29 15:52:53 63F84ECB r (reader) hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2016/02/29 15:52:53 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75242
• 2016/02/29 15:52:54 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75206
• 2016/02/29 15:52:56 63F84ECB r (reader) hdplus [mouse] ATR:
• 2016/02/29 15:52:56 63F84ECB r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/02/29 15:52:56 63F84ECB r (reader) hdplus [mouse] Setting baudrate to 115200 bps
• 2016/02/29 15:52:56 63F84ECB r (reader) hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
• 2016/02/29 15:52:56 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75536
• 2016/02/29 15:52:56 63F84ECB r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2016/02/29 15:52:57 63F84ECB r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 160

Server

Spoiler

[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB0
#protocol = internal - Nur für Dreambox, VU+, etc.!
#device = /dev/sci0 - Nur für Dreambox, VU+, etc.!
caid = 1843
boxkey = A*C
rsakey = B*5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

Die Karte steckt im hinteren USB Anschluss in einem Smargo reader.


Vielen Dank schonmal für eure Hilfe

 

[webman2]

AW: HD02 OSCAM Startet nicht

Smargoreader und

protocol = mouse

passt natürlich nicht zusammen.


Schau' mal in meinen link im signature.

 

[Joker@Deu]

AW: HD02 OSCAM Startet nicht

wenn ich den allerdings auf Smartreader stelle, zeigt er mir nach einem Neustart die Karte gar nicht mehr an. Problem ist halt, das ich keine 2 internen reader habe.. und die V14 lief schon mit der Einstellung. soweit ich mich recht erinnere...

 

[Backo]

AW: HD02 OSCAM Startet nicht

Ich frage mich wie diese Smargo's überhaupt so populär und beliebt werden konnten. Überteuerter Schrott .

Wie hast du denn den Smargo konfiguriert, bzw. welche Parameter eingestellt? Und wird der Smargo an der Gigablue erkannt?
Ansonsten ne Easymouse, Apolloreader o.a. mit FTDI Chipsatz anschaffen da meistens die Treiber überall schon dabei sind. Oder einen PCSC Reader, muss man aber oft die Treiber manuell installieren.


MfG

 

[rolu2]

AW: HD02 OSCAM Startet nicht

Ist der FTDI_SIO Treiber im Image?
Hast du den boxkey und rsakey komplett drin stehen oder so wie gepostet?

Gesendet von meinem JY-G3 mit Tapatalk

 

[tulpenknicker]

AW: HD02 OSCAM Startet nicht

Dann will ich auch noch mal meinen senf dazu geben.
Häufigster fehler...irgendwo in den keys hat sich ein leerzeichen eingeschlichen. Die keys dürfen keine leerzeichen enthalten.

 

[Backo]

AW: HD02 OSCAM Startet nicht

Der Smargo "antwortet" nicht, von daher sind auch die Box/RSA-Keys erstmal zweitrangig.

@Joker@Deu: Wird er denn aufgelistet wenn du per Telnetverbindung/SSH Sitzung auf die Gigablue zugreifst und den Befehl "dmesg" eingibst?


MfG

 

[Joker@Deu]

AW: HD02 OSCAM Startet nicht

Moin, hier der neue log
habe am .server nichts verändert, jedoch das lehrreichen vor den Codes also =A*** dabei folgendes Log

Spoiler

• 2016/02/29 16:59:23 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10976 (mipsel-unknown-linux-gnu)
• 2016/02/29 16:59:23 00000000 s (main) System name = Linux
• 2016/02/29 16:59:23 00000000 s (main) Host name = gb800solo
• 2016/02/29 16:59:23 00000000 s (main) Release = 3.1.1
• 2016/02/29 16:59:23 00000000 s (main) Version = #30 Fri Jul 11 16:47:20 CEST 2014
• 2016/02/29 16:59:23 00000000 s (main) Machine = mips
• 2016/02/29 16:59:23 00000000 s (main) Stb model = gb800ue
• 2016/02/29 16:59:23 00000000 s (main) Stb vumodel = vuultimo
• 2016/02/29 16:59:23 00000000 s (main) Stb boxtype = gigablue
• 2016/02/29 16:59:23 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 15705
• 2016/02/29 16:59:23 00000000 s (config) services reloaded: 0 services freed, 42 services loaded, rejected 0
• 2016/02/29 16:59:24 00000000 s (config) userdb reloaded: 11 accounts loaded, 0 expired, 0 disabled
• 2016/02/29 16:59:24 00000000 s (main) signal handling initialized
• 2016/02/29 16:59:24 00000000 s (config) 912 provid's loaded
• 2016/02/29 16:59:24 00000000 s (config) 278 service-id's loaded in 12 ms
• 2016/02/29 16:59:24 00000000 s (config) 42 tier-id's loaded
• 2016/02/29 16:59:24 00000000 s (net) cccam: initialized (fd=5, port=12000)
• 2016/02/29 16:59:24 00000000 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB0
• 2016/02/29 16:59:24 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2016/02/29 16:59:24 00000000 s (main) waiting for local card init
• 2016/02/29 16:59:24 7FC1527B h (webif) webif: decompressed 163945 bytes back into 392408 bytes
• 2016/02/29 16:59:24 7FC1527B h (webif) HTTP Server running. ip=xxxxxxx
• 2016/02/29 16:59:24 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75261
• 2016/02/29 16:59:24 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75244
• 2016/02/29 16:59:24 63F84ECB r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2016/02/29 16:59:25 63F84ECB r (reader) hdplus [mouse] card detected
• 2016/02/29 16:59:25 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75240
• 2016/02/29 16:59:26 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75223
• 2016/02/29 16:59:27 63F84ECB r (reader) hdplus [mouse] ATR: 3Fxxxx28
• 2016/02/29 16:59:27 63F84ECB r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/02/29 16:59:27 63F84ECB r (reader) hdplus [mouse] Setting baudrate to 111600 bps
• 2016/02/29 16:59:27 63F84ECB r (reader) hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
• 2016/02/29 16:59:27 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75222
• 2016/02/29 16:59:27 63F84ECB r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2016/02/29 16:59:29 63F84ECB r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
• 2016/02/29 16:59:30 63F84ECB r (reader) hdplus [mouse] detect native nagra card
• 2016/02/29 16:59:31 63F84ECB r (reader) hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/02/29 16:59:33 63F84ECB r (reader) hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2016/02/29 16:59:33 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75290
• 2016/02/29 16:59:34 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75228
• 2016/02/29 16:59:36 63F84ECB r (reader) hdplus [mouse] ATR: 3F xxxxx28
• 2016/02/29 16:59:36 63F84ECB r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/02/29 16:59:36 63F84ECB r (reader) hdplus [mouse] Setting baudrate to 111600 bps
• 2016/02/29 16:59:36 63F84ECB r (reader) hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
• 2016/02/29 16:59:36 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75239
• 2016/02/29 16:59:36 63F84ECB r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2016/02/29 16:59:37 63F84ECB r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
• 2016/02/29 16:59:39 63F84ECB r (reader) hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/02/29 16:59:41 63F84ECB r (reader) hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2016/02/29 16:59:41 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75244
• 2016/02/29 16:59:42 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75221
• 2016/02/29 16:59:43 63F84ECB r (reader) hdplus [mouse] ATR: 3F xxxxx 28
• 2016/02/29 16:59:43 63F84ECB r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/02/29 16:59:43 63F84ECB r (reader) hdplus [mouse] Setting baudrate to 111600 bps
• 2016/02/29 16:59:43 63F84ECB r (reader) hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
• 2016/02/29 16:59:43 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75215
• 2016/02/29 16:59:43 63F84ECB r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2016/02/29 16:59:45 63F84ECB r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
• 2016/02/29 16:59:45 63F84ECB r (reader) hdplus [mouse] card system not supported
• 2016/02/29 16:59:45 63F84ECB r (reader) hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
• 2016/02/29 16:59:45 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75259
• 2016/02/29 16:59:46 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75221
• 2016/02/29 16:59:48 63F84ECB r (reader) hdplus [mouse] ATR: 3F 0xxxxx 30 30 28
• 2016/02/29 16:59:48 63F84ECB r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/02/29 16:59:48 63F84ECB r (reader) hdplus [mouse] Calculated work ETU is 104.20 us reader mhz = 357
• 2016/02/29 16:59:48 63F84ECB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75331
• 2016/02/29 16:59:48 63F84ECB r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2016/02/29 16:59:49 63F84ECB r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
• 2016/02/29 16:59:50 63F84ECB r (reader) hdplus [mouse] detect native nagra card
• 2016/02/29 17:00:15 58649230 c (dvbapi) Demuxer 0 restarting decodingrequests after 4 ms with 1 enabled and 5 disabled ecmpids!
• 2016/02/29 17:00:15 58649230 c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19EC PMTPID 0061 (NO MATCHING READER)
• 2016/02/29 17:00:15 58649230 c (dvbapi) Demuxer 0 restarting decodingrequests after 4 ms with 1 enabled and 5 disabled ecmpids!
• 2016/02/29 17:00:15 58649230 c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19EC PMTPID 0061 (NO MATCHING READER)

- - - - - - - - - -


@ Back0

das kommt bei dem Befehl dmesg

Spoiler

Last login: Mon Feb 29 16:48:33 on console



Welcome to OpenEmbedded Linux OE-Alliance gb800solo
Linux mips 3.1.1 #30 Fri Jul 11 16:47:20 CEST 2014
~ HDFreaks modded Image V4.1 ~


gb800solo login: root
Filesystem Informations
Filesystem Size Used Available Use% Mounted on
/dev/root 120.0M 72.0M 48.0M 60% /
devtmpfs 70.6M 8.0K 70.6M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
tmpfs 70.7M 292.0K 70.5M 0% /var/volatile
root@gb800solo:~# dmesg
Linux version 3.1.1 (jenkins@puck1170.server4you.de) (gcc version 4.9.0 (GCC) ) #30 Fri Jul 11 16:47:20 CEST 2014
Fetching vars from bootloader... found 8 vars.
Early serial console at MMIO32 0x10400b00 (options '115200n8')
bootconsole [uart0] enabled
Options: sata=0 enet=1 emac_1=0 no_mdio=0 docsis=0 pci=1 smp=0 moca=0 usb=1
Using 256 MB RAM (from straps)
bootconsole [early0] enabled
CPU revision is: 0101954c (Brcm4380)
FPU revision is: 01739300
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
bmem: adding 143 MB LINUX region at 6 MB (0x08f84000@0x0067c000)
bmem: adding 106 MB RESERVED region at 150 MB (0x06a00000@0x09600000)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00010000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00010000
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 80628ed0, node_mem_map 81000000
Normal zone: 512 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 65024 pages, LIFO batch:15
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: root=/dev/mtdblock0 rootfstype=jffs2 rw console=ttyS0,115200n8 bmem=106M
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
MIPS secondary cache 128kB, 8-way, linesize 128 bytes.
Writing ErrCtl register=00812006
Readback ErrCtl register=00812006
L2 cache parity protection enabled
Memory: 144668k/262144k available (5136k kernel code, 117476k reserved, 1173k data, 212k init, 0k highmem)
NR_IRQS:128
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 332 MHz (166.497 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 220.16 BogoMIPS (lpj=110080)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
devtmpfs: initialized
NET: Registered protocol family 16
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.17)
msgmni has been set to 282
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
loop: module loaded
GigaBox NOR flash device: 0x08000000 @ 0x18000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x00227e
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 3 MTD partitions on "physmap-flash.0":
0x000000400000-0x000007c00000 : "rootfs"
0x000000000000-0x000008000000 : "all"
0x000000000000-0x000000400000 : "kernel"
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:00:de:ad:be:ef)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
brcm-pm: enabling usb clocks
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 63, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 64, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 59, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 254
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
usb 3-1: new full speed USB device number 2 using ohci-brcm
VFS: Mounted root (jffs2 filesystem) on device 31:0.
devtmpfs: mounted
Freeing unused kernel memory: 212k freed
input: gigablue remote control as /devices/virtual/input/input0
DVB: registering new adapter (gb800ue)
DVB: registering adapter 0 frontend 0 (GIGA DVB-S2 NIM (Internal))...
fb0: brcmfb frame buffer device
boxmodel: module license 'proprietary' taints kernel.
Disabling lock debugging due to kernel taint
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
usb 3-1: Detected FT232BM
usb 3-1: Number of endpoints 2
usb 3-1: Endpoint 1 MaxPacketSize 64
usb 3-1: Endpoint 2 MaxPacketSize 64
usb 3-1: Setting MaxPacketSize 64
ftdi_sio ttyUSB0: Unable to read latency timer: -32
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
NET: Registered protocol family 10
svc: failed to register lockdv1 RPC service (errno 124).
eth0: no IPv6 routers present
Erase at 0x061e0000 failed immediately: errno -5
usb 3-1: USB disconnect, device number 2
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 3-1:1.0: device disconnected
usb 3-1: new full speed USB device number 3 using ohci-brcm
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
usb 3-1: Detected FT232BM
usb 3-1: Number of endpoints 2
usb 3-1: Endpoint 1 MaxPacketSize 64
usb 3-1: Endpoint 2 MaxPacketSize 64
usb 3-1: Setting MaxPacketSize 64
ftdi_sio ttyUSB1: Unable to read latency timer: -32
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB1
usb 3-1: USB disconnect, device number 3
ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
ftdi_sio 3-1:1.0: device disconnected
usb 3-1: new full speed USB device number 4 using ohci-brcm
hub 3-0:1.0: unable to enumerate USB device on port 1
usb 3-1: new full speed USB device number 5 using ohci-brcm
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
usb 3-1: Detected FT232BM
usb 3-1: Number of endpoints 2
usb 3-1: Endpoint 1 MaxPacketSize 64
usb 3-1: Endpoint 2 MaxPacketSize 64
usb 3-1: Setting MaxPacketSize 64
ftdi_sio ttyUSB0: Unable to read latency timer: -32
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
root@gb800solo:~#

 

[Backo]

AW: HD02 OSCAM Startet nicht

Hast du den Smargo mehrfach ein und ausgesteckt? Oder noch andere externe Kartenleser an der Gigablue?

Wenn nicht, dann wird der Smargo ausgeworfen und wieder neu erkannt usw.


MfG

 

[Joker@Deu]

AW: HD02 OSCAM Startet nicht

Moin, es hängt nur der Smargo an dem USB port. ohne Hub oder Ähnlichem. das olle teil ist jetzt auch schon ewig alt. habe aber gerade die Seriennummer von dem Vieh rausbekommen... nur, wenn ich wie schon geschrieben über das Smartreader Protokoll gehe, dann zeigt er mir anschließend den Reader gar nicht mehr an. Und vorher hat er mir wenigstens schon eine ATR gegeben.

 

[Backo]

AW: HD02 OSCAM Startet nicht

Dann ist der Smargo wahrscheinlich endlich defekt.

Spoiler

ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
usb 3-1: USB disconnect, device number 2
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 3-1:1.0: device disconnected
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB1
usb 3-1: USB disconnect, device number 3
ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
ftdi_sio 3-1:1.0: device disconnected
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0

Ansonsten versuchs mal ohne Festplatte am USB Port, villeicht sinkt die Versorgungsspannung am USB Port zu stark.


MfG

 

[Joker@Deu]

AW: HD02 OSCAM Startet nicht

Hey,
Festplatte oder Ähnliches hat das dumme ding gar nicht... xD ist nichts dran außer dem Reader... welchen würdest du als ersatz empfehlen?

 

[Backo]

AW: HD02 OSCAM Startet nicht

Gut da hab ich mich beim schnell lesen verguckt.

Schon mal probiert den Smargo mittels Prgoramm(Smartreader.exe) neu einzustellen? Eventuell ein FW Downgrade auf 1.6 durchführen. Aber das ständige ab und anmelden am USB Port deutet auf nichts gutes hin.


Hatte ich ja schon genannt Easymouse 2 o.ä. läuft zu 99% problemlos. Oder eben einen PCSC wie Omnikey etc., da müssen aber Treiber nachinstalliert werden. Und für manche Images/Receiver/CPU-Architekturen erst kompiliert werden.



MfG

 

[supraracer]

AW: HD02 OSCAM Startet nicht

Dein Gigablue HD800 hat doch zwei Slots, wieso steckst du die HD02 nicht intern?
Und höre auf den ATR im Log zu XXXen, da steht nix geheimes drin, hilft aber ungemein bei der Fehlerdiagnose.

-supraracer

 

[Joker@Deu]

AW: HD02 OSCAM Startet nicht

Habe nur die HD800 solo die hat nur einen internen, da steckt die V14 drin und unten ist ja nur der Ci Slot... okay, das wusste ich nicht. ich guck gleich mal nach nem neuen Log...