HD02 Aktivierung

[n0niL]

Habe eine abgelaufen HD02 Karte, die ich online wieder aktivieren möchte. Habe Oscam laufen. Muss ich bei der Aktivierung etwas beachten oder kann ich die EMMs einfach schreiben lassen und gut ist?

 

[Alex]

AW: HD02 Aktivierung

Darfst halt keine Unique oder Global EMMs blocken

 

[zwergnase84]

AW: HD02 Aktivierung

Es gibt einiges zu beachten zb. manche Geräte senden keine emm

 

[supraracer]

AW: HD02 Aktivierung

Du brauchst bei der HD02 einen OScam Client der dir EMM sendet, mit CCcam geht es nicht.

-supraracer

 

[n0niL]

AW: HD02 Aktivierung

EMMs wollte ich generell nicht blocken bei der HD02....
Oscam Client habe ich. Aber CCCam als Protokoll geht schon oder?

 

[Bodo-1]

AW: HD02 Aktivierung

Ja das geht


Gesendet von iPhone mit Tapatalk

 

[MM§]

AW: HD02 Aktivierung

Oder du aktivierst die Karte mit Scam, und wenn die dann aktiviert hast, dann kannst du wieder auf Oscam stellen.

 

[n0niL]

AW: HD02 Aktivierung

Bin gerade dabei den CCCam Clienten in Oscam einzurichten.

Spoiler

[reader]
label = cccam
protocol = cccam
device = 192.168.xxx.xxx,xxx
account = xxx,xxx
emmcache = 1,1,2
detect = cd
group = 1
caid = 1843

Jedoch funktioniert das nicht, da der Eintrag "account" nicht akzeptiert wird. -> veraltet.


Kann mit jemand sagen, wie man das macht? Also in Oscam einen CCCam Klienten einrichten!?

account -> user !? habe ich gerade gefunden. probiers mal aus

 

[Zwenny]

AW: HD02 Aktivierung

sollte so funktionieren

Spoiler

label = cccam
protocol = cccam
device = 192.168.xxx.xxx,xxx
user = XXXXX
password = YYYYY
emmcache = 1,1,2
group = 1
caid = 1843
cccversion = 2.3.0

 

[Pilot]

AW: HD02 Aktivierung

alt: account

neu:
user=
pass =

 

[n0niL]

AW: HD02 Aktivierung

Ok Danke.
Bekomms aber nicht hin.
Habe eine Freetz mit Oscam Server,einen Eaysmouse2 Cardreader und eine schwarze hd02.


Mein Server Log:

Spoiler

• 2014/12/30 12:46:17 596500 r hdplus [mouse] detect native nagra card
• 2014/12/30 12:46:20 596500 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/12/30 12:46:21 596500 r hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2014/12/30 12:46:23 596500 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 xx xx 53 50 31 38 30 20 4D 65 72 xx xx xx xx
• 2014/12/30 12:46:23 596500 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/12/30 12:46:23 596500 r hdplus [mouse] Setting baudrate to 115200 bps
• 2014/12/30 12:46:23 596500 r hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
• 2014/12/30 12:46:23 596500 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/12/30 12:46:23 596500 r hdplus [mouse] Card responded ok for ifsd request of 160
• 2014/12/30 12:46:23 596500 r hdplus [mouse] card system not supported
• 2014/12/30 12:46:23 596500 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/12/30 12:46:24 596500 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 xx xx 53 50 31 38 30 20 4D 65 72 xx xx xx xx
• 2014/12/30 12:46:24 596500 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/12/30 12:46:24 596500 r hdplus [mouse] Calculated work ETU is 101.09 us reader mhz = 368
• 2014/12/30 12:46:24 596500 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/12/30 12:46:26 596500 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
• 2014/12/30 12:46:27 596500 r hdplus [mouse] detect native nagra card
• 2014/12/30 12:46:29 596500 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/12/30 12:46:30 596500 r hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2014/12/30 12:46:32 596500 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 xx xx 53 50 31 38 30 20 4D 65 72 xx xx xx xx
• 2014/12/30 12:46:32 596500 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/12/30 12:46:32 596500 r hdplus [mouse] Setting baudrate to 115200 bps
• 2014/12/30 12:46:32 596500 r hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
• 2014/12/30 12:46:32 596500 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/12/30 12:46:32 596500 r hdplus [mouse] Card responded ok for ifsd request of 160
• 2014/12/30 12:46:35 596500 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/12/30 12:46:36 596500 r hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2014/12/30 12:46:38 596500 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 xx xx 53 50 31 38 30 20 4D 65 72 xx xx xx xx
• 2014/12/30 12:46:38 596500 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/12/30 12:46:38 596500 r hdplus [mouse] Setting baudrate to 115200 bps
• 2014/12/30 12:46:38 596500 r hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
• 2014/12/30 12:46:38 596500 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/12/30 12:46:38 596500 r hdplus [mouse] Card responded ok for ifsd request of 160
• 2014/12/30 12:46:38 596500 r hdplus [mouse] card system not supported
• 2014/12/30 12:46:38 596500 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/12/30 12:46:38 596500 r hdplus [mouse] card initializing error

Freetz Server:

oscam.config

Spoiler

[global]
logfile = /data/addon/oscam/oscam.log
emmlogdir = /data/addon/oscam/
clienttimeout = 90000
failbantime = 5
Failbancount = 3
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
readerrestartseconds = 5
unlockparental = 1
nice = -1
maxlogsize = 100
waitforcards = 1

[cccam]
port = xxx
reshare = 0
version = 2.2.1
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240
ignorereshare = 1
minimizecards = 0
nodeid = 30d5de61317edce5

oscam.server

Spoiler

[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB0
services = hdplus
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
ecmwhitelist = 89
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
saveemm = 1

oscam.user

Spoiler

[account]
user = xxx
pwd = xxx
au = hdplus
group = 1

Bei meinem Oscam Client habe ich folgendes eingetragen:
oscam.server

Spoiler

[reader]
label = cccam
protocol = cccam
device = 192.168.xxx.xxx,xxx
user = xxx
password = xxx
emmcache = 1,1,2
detect = cd
group = 1
caid = 1843

Mein Easymouse steht auf: 5v, phoenix, 3,58 Mhz

 

[Alex]

AW: HD02 Aktivierung

Stell auf 6 MHz an der Mouse, mach mhz = 600 und entferne cardmhz ganz. Dann neustarten
Deine lokale IP (192.x) brauchst btw. nicht zensieren

 

[n0niL]

AW: HD02 Aktivierung

Spoiler

• 2014/12/30 13:10:10 5EBD38 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
• 2014/12/30 13:10:15 575858 r hdplus [mouse] creating thread for device /dev/ttyUSB0
• 2014/12/30 13:10:15 5E0900 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
• 2014/12/30 13:10:16 5EBD38 r hdplus [mouse] card detected
• 2014/12/30 13:10:17 5E0900 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 xx xx 53 50 31 38 30 20 4D 65 72 xx xx xx xx
• 2014/12/30 13:10:17 5E0900 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/12/30 13:10:17 5E0900 r hdplus [mouse] Setting baudrate to 111600 bps
• 2014/12/30 13:10:17 5E0900 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
• 2014/12/30 13:10:17 5E0900 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2014/12/30 13:10:17 5E0900 r hdplus [mouse] Card responded ok for ifsd request of 160
• 2014/12/30 13:10:18 5E0900 r hdplus [mouse] detect native nagra card
• 2014/12/30 13:10:20 5E0900 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/12/30 13:10:21 5E0900 r hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2014/12/30 13:10:22 5E0900 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 xx xx 53 50 31 38 30 20 4D 65 72 xx xx xx xx
• 2014/12/30 13:10:22 5E0900 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/12/30 13:10:22 5E0900 r hdplus [mouse] Setting baudrate to 111600 bps
• 2014/12/30 13:10:22 5E0900 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
• 2014/12/30 13:10:23 5E0900 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2014/12/30 13:10:23 5E0900 r hdplus [mouse] Card responded ok for ifsd request of 160
• 2014/12/30 13:10:23 5E0900 r hdplus [mouse] card system not supported
• 2014/12/30 13:10:23 5E0900 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/12/30 13:10:24 5E0900 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 xx xx 53 50 31 38 30 20 4D 65 72 xx xx xx xx
• 2014/12/30 13:10:24 5E0900 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/12/30 13:10:24 5E0900 r hdplus [mouse] Calculated work ETU is 62.00 us reader mhz = 600
• 2014/12/30 13:10:24 5E0900 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2014/12/30 13:10:25 5E0900 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
• 2014/12/30 13:10:26 5E0900 r hdplus [mouse] detect native nagra card
• 2014/12/30 13:10:27 5E0900 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/12/30 13:10:28 5E0900 r hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2014/12/30 13:10:30 5E0900 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 xx xx 53 50 31 38 30 20 4D 65 72 xx xx xx xx
• 2014/12/30 13:10:30 5E0900 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/12/30 13:10:30 5E0900 r hdplus [mouse] Setting baudrate to 111600 bps
• 2014/12/30 13:10:30 5E0900 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
• 2014/12/30 13:10:30 5E0900 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2014/12/30 13:10:30 5E0900 r hdplus [mouse] Card responded ok for ifsd request of 160
• 2014/12/30 13:10:32 5E0900 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/12/30 13:10:33 5E0900 r hdplus [mouse] T1 Resync command error, trying to reactivate!
• 2014/12/30 13:10:34 5E0900 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 xx xx xx 50 31 38 30 20 4D 65 72 xx xx xx xx
• 2014/12/30 13:10:34 5E0900 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/12/30 13:10:34 5E0900 r hdplus [mouse] Setting baudrate to 111600 bps
• 2014/12/30 13:10:34 5E0900 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
• 2014/12/30 13:10:34 5E0900 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2014/12/30 13:10:34 5E0900 r hdplus [mouse] Card responded ok for ifsd request of 160
• 2014/12/30 13:10:34 5E0900 r hdplus [mouse] card system not supported
• 2014/12/30 13:10:34 5E0900 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/12/30 13:10:34 5E0900 r hdplus [mouse] card initializing error

Ändert nichts...

 

[Alex]

AW: HD02 Aktivierung

Dann versuch mal noch detect = cts statt detect = cd, hat bei mir damals beim T1 Resync command error geholfen.

 

[dodo83]

AW: HD02 Aktivierung

mal auch RSA und BOXKEY im WebIF auf Leerzeichen prüfen, gab es schon mal auch in dem Zusammenhang meine ich