HD02 Aktivierung

[Alex]

AW: HD02 Aktivierung

Mal mein Reader zum Vergleich

Spoiler

[reader]
label                         = hd02
description                   = HD02
protocol                      = mouse
device                        = /dev/ttyUSB0
fallback                      = 1
caid                          = 1843
boxkey                        = A7642F57BC96D37C
rsakey                        = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect                        = cts
mhz                           = 600
group                         = 1
emmcache                      = 1,1,2

 

[n0niL]

AW: HD02 Aktivierung

Juhu das geht schonmal.

Spoiler

• 2014/12/30 13:31:02 575458 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 xx xx 53 50 31 38 30 20 4D 65 72 xx xx xx xx
• 2014/12/30 13:31:02 575458 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/12/30 13:31:02 575458 r hdplus [mouse] Setting baudrate to 111600 bps
• 2014/12/30 13:31:02 575458 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
• 2014/12/30 13:31:02 575458 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2014/12/30 13:31:03 575458 r hdplus [mouse] Card responded ok for ifsd request of 160
• 2014/12/30 13:31:04 575458 r hdplus [mouse] detect native nagra card
• 2014/12/30 13:31:05 575458 r hdplus [mouse] ready for requests
• 2014/12/30 13:31:05 575458 r hdplus [mouse] found card system nagra
• 2014/12/30 13:31:05 575458 r hdplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2014/12/30 13:31:05 575458 r hdplus [nagra] ROM: D X A X X 1 8 0
• 2014/12/30 13:31:05 575458 r hdplus [nagra] REV: M X r X X 0
• 2014/12/30 13:31:05 575458 r hdplus [nagra] SER: ############
• 2014/12/30 13:31:05 575458 r hdplus [nagra] CAID: 1843
• 2014/12/30 13:31:05 575458 r hdplus [nagra] Prv.ID: 00 00 XX 11 (sysid)
• 2014/12/30 13:31:05 575458 r hdplus [nagra] Prv.ID: 00 00 XX 00
• 2014/12/30 13:31:05 575458 r hdplus [nagra] IRD ID: ############
• 2014/12/30 13:31:05 575458 r hdplus [nagra] active to: 2014/05/02 12:59
• 2014/12/30 13:31:05 575458 r hdplus [nagra] -----------------------------------------
• 2014/12/30 13:31:05 575458 r hdplus [nagra] |id |tier |valid from |valid to |
• 2014/12/30 13:31:05 575458 r hdplus [nagra] +----+--------+------------+------------+
• 2014/12/30 13:31:05 575458 r hdplus [nagra] |8011|0066 |2012/04/04 |2013/04/05 |
• 2014/12/30 13:31:05 575458 r hdplus [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
• 2014/12/30 13:31:05 575458 r hdplus [nagra] -----------------------------------------
• 2014/12/30 13:31:06 0 s init for all local cards done
• 2014/12/30 13:31:06 0 s anti cascading disabled

Spoiler

[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2

Jetzt muss ich noch die Aktivierung hinbekommen. Aktivierung habe vorher online beantragt.

Server

Spoiler

• 2014/12/30 13:35:36 5C45F0 c encrypted cccam-client 192.168.xxx.xxx granted (xxx, au=on (1 reader))
• 2014/12/30 13:36:07 5C45F0 c xxx disconnected from 192.168.xxx.xxx
• 2014/12/30 13:38:07 59CD60 c encrypted cccam-client 192.168.xxx.xxx granted (xxx, au=on (1 reader))
• 2014/12/30 13:38:38 59CD60 c xxx disconnected from 192.168.xxx.xxx
• 2014/12/30 13:39:40 5962C0 c encrypted cccam-client 192.168.xxx.xxx granted (xxx, au=on (1 reader))
• 2014/12/30 13:40:11 5962C0 c xxx disconnected from 192.168.xxx.xxx

Client:

Spoiler

2014/12/30 13:40:12 77602478 p cccam [cccam] disconnected: reason inactivity

 

[Alex]

AW: HD02 Aktivierung

Bitte benutze in Zukunft mal Spoiler
Setze mal das beim Client

[h=5]ccckeepalive[/h]

Sie müssen registriert sein, um Links zu sehen.

Parameter wird abhängig vom Setup/Programmversion benötigt.
Sendet eine "keepalive-message", um eine Verbindung zum remote CCCam-Server zu erhalten.
ccckeepalive = 1 # ja
= 0 # nein (default)

Anhand von deinem Log kann man ja auch keine Anfrage des Clients sehen. Hast du auf einen HD+ Sender geschalten?

 

[n0niL]

AW: HD02 Aktivierung

Sorry. Werde ich in Zukunft machen.

Habe jetzt folgendes in die oscam.dvbapi des Clienten eingetragen:
P: 0D05
P: 098C
P: 1843 1
I: 1830
I: 0

P: 1843 1 und I: 1830 wurden ergänzt.

und die oscam.services, oscam.srvid und oscam.tiers geupdatet.

Server

Spoiler

• 2014/12/30 14:01:27 59EB90 c n0m3k (1843&000000/0000/EF15/89:57362959816BAFD6F547AA3FC9A8D086): not found (331 ms) by hdplus
• 2014/12/30 14:01:53 59EB90 c n0m3k (1843&000000/0000/EF10/89:694E14A1E72A4F17B8DF2F07D416AB69): not found (321 ms) by hdplus
• 2014/12/30 14:02:50 59EB90 c n0m3k (1843&000000/0000/EF76/89:138D694C455DDEFD413CF77F0998FC28): not found (325 ms) by hdplus

Client:

Spoiler

2014/12/30 14:04:06 5C3810 c local (1843&000000/0000/EF76/89:CC2972B0894AC6F9C1A67ED37DC3D2AA): not found (2 ms) by cccam
2014/12/30 14:04:06 5C3810 c local (1843&000000/0000/EF76/89:CC2972B0894AC6F9C1A67ED37DC3D2AA): not found (1 ms) by cccam
2014/12/30 14:04:06 5C3810 c local (1843&000000/0000/EF76/89:CC2972B0894AC6F9C1A67ED37DC3D2AA): not found (2 ms) by cccam
2014/12/30 14:04:07 0 --- Skipped 2 duplicated log lines ---
2014/12/30 14:04:07 5C3810 c local (1843&000000/0000/EF76/89:CC2972B0894AC6F9C1A67ED37DC3D2AA): not found (1 ms) by cccam
2014/12/30 14:04:07 5C3810 c local (1843&000000/0000/EF76/89:CC2972B0894AC6F9C1A67ED37DC3D2AA): not found (2 ms) by cccam
2014/12/30 14:04:08 0 --- Skipped 1 duplicated log lines ---
2014/12/30 14:04:08 5C3810 c local (1843&000000/0000/EF76/89:CC2972B0894AC6F9C1A67ED37DC3D2AA): not found (1 ms) by cccam
2014/12/30 14:04:08 0 --- Skipped 1 duplicated log lines ---
2014/12/30 14:04:08 5C3810 c local (1843&000000/0000/EF76/89:CC2972B0894AC6F9C1A67ED37DC3D2AA): not found (2 ms) by cccam
2014/12/30 14:04:08 5C3810 c local (1843&000000/0000/EF76/89:CC2972B0894AC6F9C1A67ED37DC3D2AA): not found (1 ms) by cccam
2014/12/30 14:04:09 0 --- Skipped 1 duplicated log lines ---
2014/12/30 14:04:09 5C3810 c local (1843&000000/0000/EF76/89:7EF83B090474940A61264089AF1805D5): rejected (2 ms) by cccam
2014/12/30 14:04:09 5C3810 c local (1843&000000/0000/EF76/89:7EF83B090474940A61264089AF1805D5): rejected (1 ms) by cccam
2014/12/30 14:04:14 0 --- Skipped 20 duplicated log lines ---
2014/12/30 14:04:14 5C3810 c local (1843&000000/0000/EF76/89:7EF83B090474940A61264089AF1805D5): rejected (2 ms) by cccam
2014/12/30 14:04:15 5C3810 c local (1843&000000/0000/EF76/89:7EF83B090474940A61264089AF1805D5): rejected (1 ms) by cccam
2014/12/30 14:04:16 0 --- Skipped 4 duplicated log lines ---
2014/12/30 14:04:16 5C3810 c local (1843&000000/0000/EF76/89:EB640F991DE7D399A69B895D7A994964): rejected (1 ms) by cccam
2014/12/30 14:04:17 0 --- Skipped 5 duplicated log lines ---
2014/12/30 14:04:17 5C3810 c local (1843&000000/0000/EF76/89:EB640F991DE7D399A69B895D7A994964): rejected (3 ms) by cccam
2014/12/30 14:04:18 5C3810 c local (1843&000000/0000/EF76/89:EB640F991DE7D399A69B895D7A994964): rejected (1 ms) by cccam
2014/12/30 14:04:18 0 --- Skipped 1 duplicated log lines ---
2014/12/30 14:04:18 5C3810 c local (1843&000000/0000/EF76/89:EB640F991DE7D399A69B895D7A994964): rejected (2 ms) by cccam
2014/12/30 14:04:18 5C3810 c local (1843&000000/0000/EF76/89:EB640F991DE7D399A69B895D7A994964): rejected (1 ms) by cccam
2014/12/30 14:04:20 0 --- Skipped 4 duplicated log lines ---
2014/12/30 14:04:20 5C3810 c local (1843&000000/0000/EF76/89:EB640F991DE7D399A69B895D7A994964): rejected (2 ms) by cccam

Jetzt kommt was an. Aber es wird nicht hell. Woher weis ich ab wann die Karte aktiviert ist?

 

[bombadil]

AW: HD02 Aktivierung

Hi,

das merkst du wenn es hell wird

Mach mal nur diesen Eintrag in der oscam.dvbapi

P: 1843 1
I: 0

RTLHD und nicht zappen

 

[Alex]

AW: HD02 Aktivierung

Geht auch auf jedem x-beliebigen anderen HD+ Sender hab ich erst vor 2 Wochen getestet.

 

[bombadil]

AW: HD02 Aktivierung

Hi,

schreib beim User noch das hinzu, auf dem Client

au = cccam

klar geht das auf allen Sendern. RTLHD liefert viele.

Grüße

 

[n0niL]

AW: HD02 Aktivierung

Habe jetzt mal die Aktivierung online nochmal angestoßen und ca. 30min gewartet. Aber nix geht.

Server Log Ausschnitt:

Spoiler

• 2014/12/30 14:33:36 5D71D8 c n0m3k disconnected from 192.168.xxx.xxx
• 2014/12/30 14:33:40 0 --- Skipped 1 duplicated log lines ---
• 2014/12/30 14:33:40 5B40E0 c encrypted cccam-client 192.168.178.23 granted (xxx, au=on (1 reader))
• 2014/12/30 14:33:47 5B40E0 c n0m3k (1843&000000/0000/EF10/89:395F38AA665671E5B0749A68C017AC58): not found (321 ms) by hdplus
• 2014/12/30 14:35:00 5B40E0 c n0m3k (1843&000000/0000/EF10/89:664E930A48AFAC3EAF95CBC680ACDF60): not found (323 ms) by hdplus
• 2014/12/30 14:36:20 5B40E0 c n0m3k (1843&000000/0000/EF10/89:7F3EA184D07162EA93BA4F27FED97E10): not found (324 ms) by hdplus
• 2014/12/30 14:37:40 5B40E0 c n0m3k (1843&000000/0000/EF10/89:699BCB0EACB8FB0B2AC81EE979CA93CE): not found (327 ms) by hdplus
• 2014/12/30 14:39:00 5B40E0 c n0m3k (1843&000000/0000/EF10/89:B6A2A52D997F3EF4A923E65FD2637037): not found (321 ms) by hdplus
• 2014/12/30 14:40:20 5B40E0 c n0m3k (1843&000000/0000/EF10/89:F977842507E028335968B1158E892029): not found (322 ms) by hdplus
• 2014/12/30 14:41:40 5B40E0 c n0m3k (1843&000000/0000/EF10/89:7469FAB7C1A85CB1BE8AC46375AA1A39): not found (322 ms) by hdplus
• 2014/12/30 14:43:00 5B40E0 c n0m3k (1843&000000/0000/EF10/89:07A8BF37E89059C6FD2F984820A5076E): not found (329 ms) by hdplus
• 2014/12/30 14:44:20 5B40E0 c n0m3k (1843&000000/0000/EF10/89:38887B4925517BF2B71E9453CA3BC29F): not found (322 ms) by hdplus
• 2014/12/30 14:45:40 5B40E0 c n0m3k (1843&000000/0000/EF10/89:F79271499E8D290E12B1508B55E72BAF): not found (323 ms) by hdplus
• 2014/12/30 14:46:41 5B40E0 c n0m3k disconnected from 192.168.xxx.xxx
• 2014/12/30 14:46:44 5D3AF0 c encrypted cccam-client 192.168.xxx.xxx granted (xxx, au=on (1 reader))
• 2014/12/30 14:46:51 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:7F30C9AE5FA647E0C4B132D326C16314): not found (323 ms) by hdplus
• 2014/12/30 14:48:10 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:6C4B41C72DD19612ED2E087F0D00A277): not found (323 ms) by hdplus
• 2014/12/30 14:49:30 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:679AED0B1CDA2C719764706C619AE88E): not found (324 ms) by hdplus
• 2014/12/30 14:50:50 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:2D6FBC166218B247C6239443491CEE2E): not found (323 ms) by hdplus
• 2014/12/30 14:52:10 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:E6D6F14BE693E927ABC67C079B752950): not found (324 ms) by hdplus
• 2014/12/30 14:53:30 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:C49FAF0ACFBCE6023FE67A722952DCA4): not found (329 ms) by hdplus
• 2014/12/30 14:54:50 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:BFB9E1D7F4065B99031B02B536D4C1CC): not found (324 ms) by hdplus
• 2014/12/30 14:56:10 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:2341A6C0F4DB62E1508AAF7E143D38E9): not found (323 ms) by hdplus
• 2014/12/30 14:57:30 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:9B6EEA7F9CC8FC3AC49A95D2278A471A): not found (323 ms) by hdplus
• 2014/12/30 14:58:50 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:9539B3C5325C6AAD4D519C17CE74FD1D): not found (330 ms) by hdplus
• 2014/12/30 15:00:10 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:F16D3A11524E5F2AB9D24E12F5109FFF): not found (325 ms) by hdplus
• 2014/12/30 15:01:30 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:BCBC1A58FC1365A19686BD664C75926C): not found (324 ms) by hdplus
• 2014/12/30 15:02:50 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:C670904A0A32E92A02184784586A21B9): not found (321 ms) by hdplus
• 2014/12/30 15:04:10 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:507B04D9CF9CA2ECDE2E9F12587239B7): not found (323 ms) by hdplus
• 2014/12/30 15:05:30 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:9F81A03934015AC7B0406002C0F0CF22): not found (325 ms) by hdplus
• 2014/12/30 15:06:50 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:89C9F759F6D04EBCF12761AA6823DC01): not found (325 ms) by hdplus
• 2014/12/30 15:08:10 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:FBE379082FD953942EB3756D86B9F03E): not found (335 ms) by hdplus
• 2014/12/30 15:09:30 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:65979D3AC3DF3CC539636FC2A587A37D): not found (323 ms) by hdplus
• 2014/12/30 15:10:50 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:4FF64B9039401D78F4F3EA2690389889): not found (325 ms) by hdplus
• 2014/12/30 15:12:10 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:F823D6A727CDC83DFBB31E7192836307): not found (326 ms) by hdplus
• 2014/12/30 15:13:30 5D3AF0 c n0m3k (1843&000000/0000/EF10/89:2B65FEB27D806FEC5ED482D3A77D85B6): not found (328 ms) by hdplus

Client Log Ausschnitt

Spoiler

• 2014/12/30 15:15:37 611240 c local (1843&000000/0000/EF10/89:1F473D882B3B6C93CC62A67D571E37EF): rejected (2 ms) by cccam - RTL HD
• 2014/12/30 15:15:38 0 --- Skipped 2 duplicated log lines ---
• 2014/12/30 15:15:38 611240 c local (1843&000000/0000/EF10/89:1F473D882B3B6C93CC62A67D571E37EF): rejected (1 ms) by cccam - RTL HD
• 2014/12/30 15:15:38 611240 c local (1843&000000/0000/EF10/89:1F473D882B3B6C93CC62A67D571E37EF): rejected (2 ms) by cccam - RTL HD
• 2014/12/30 15:15:38 611240 c local (1843&000000/0000/EF10/89:1F473D882B3B6C93CC62A67D571E37EF): rejected (1 ms) by cccam - RTL HD
• 2014/12/30 15:15:38 611240 c local (1843&000000/0000/EF10/89:1F473D882B3B6C93CC62A67D571E37EF): rejected (3 ms) by cccam - RTL HD
• 2014/12/30 15:15:39 611240 c local (1843&000000/0000/EF10/89:1F473D882B3B6C93CC62A67D571E37EF): rejected (2 ms) by cccam - RTL HD
• 2014/12/30 15:15:40 0 --- Skipped 4 duplicated log lines ---
• 2014/12/30 15:15:40 611240 c local (1843&000000/0000/EF10/89:B549C3F31AF91C42A6524D4EB70AD922): rejected (1 ms) by cccam - RTL HD
• 2014/12/30 15:15:43 0 --- Skipped 12 duplicated log lines ---
• 2014/12/30 15:15:43 611240 c local (1843&000000/0000/EF10/89:B549C3F31AF91C42A6524D4EB70AD922): rejected (2 ms) by cccam - RTL HD
• 2014/12/30 15:15:44 611240 c local (1843&000000/0000/EF10/89:B549C3F31AF91C42A6524D4EB70AD922): rejected (1 ms) by cccam - RTL HD
• 2014/12/30 15:15:44 611240 c local (1843&000000/0000/EF10/89:B549C3F31AF91C42A6524D4EB70AD922): rejected (2 ms) by cccam - RTL HD
• 2014/12/30 15:15:44 611240 c local (1843&000000/0000/EF10/89:B549C3F31AF91C42A6524D4EB70AD922): rejected (1 ms) by cccam - RTL HD
• 2014/12/30 15:15:45 0 --- Skipped 2 duplicated log lines ---
• 2014/12/30 15:15:45 611240 c local (1843&000000/0000/EF10/89:B549C3F31AF91C42A6524D4EB70AD922): rejected (2 ms) by cccam - RTL HD
• 2014/12/30 15:15:45 611240 c local (1843&000000/0000/EF10/89:B549C3F31AF91C42A6524D4EB70AD922): rejected (1 ms) by cccam - RTL HD
• 2014/12/30 15:15:45 611240 c local (1843&000000/0000/EF10/89:B549C3F31AF91C42A6524D4EB70AD922): rejected (2 ms) by cccam - RTL HD
• 2014/12/30 15:15:46 611240 c local (1843&000000/0000/EF10/89:B549C3F31AF91C42A6524D4EB70AD922): rejected (1 ms) by cccam - RTL HD
• 2014/12/30 15:15:46 611240 c local (1843&000000/0000/EF10/89:B549C3F31AF91C42A6524D4EB70AD922): rejected (2 ms) by cccam - RTL HD

@bombadil: wo soll das au = cccam rein?


Hier nochmal die Configs:

Server:
oscam.conf

Spoiler

[global]
logfile = /data/addon/oscam/oscam.log
emmlogdir = /data/addon/oscam/
clienttimeout = 90000
failbantime = 5
Failbancount = 3
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
readerrestartseconds = 5
unlockparental = 1
nice = -1
maxlogsize = 100
waitforcards = 1

[cccam]
port = xxx
reshare = 0
version = 2.3.0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240
ignorereshare = 1
minimizecards = 0
nodeid = 30d5de61317edce5

oscam.server

Spoiler

[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2


oscam.users
[account]
user = xxx
pwd = xxx
au = hdplus
group = 1

Muss ich clienttimeout noch höher setzten oder beim user noch caid angeben?


Client Config:
oscam.conf

Spoiler

[global]
logfile = /var/log/oscam.log
clienttimeout = 15000
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
nice = -1
waitforcards = 1
maxlogsize = 1500
preferlocalcards = 1
#saveinithistory = 1 #wird nicht angekommen
emmlogdir = /etc/tuxbox/config/emm
#level = 15


[cache]
delay = 120
max_time = 18


[cccam]
port = xxx
nodeid = 427090AD10B514E8
version = 2.3.0
reshare = 0
reshare_mode = 0
forward_origin_card = 1
updateinterval = 120


[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox

oscam.server

Spoiler

[reader]
label = cccam
protocol = cccam
device = 192.168.xxx.xxx,xxx
user = xxx
password = xxx
emmcache = 1,1,2
detect = cd
group = 1
caid = 1843
ccckeepalive = 1

oscam.dvbapi

Spoiler

P: 1843 1
I: 0

 

[dodo83]

AW: HD02 Aktivierung

poste mal die oscam.user vom Client

 

[Alex]

AW: HD02 Aktivierung

Am besten von Client und User die oscam.user

 

[dodo83]

AW: HD02 Aktivierung

vom Server ist mit drin in der oscam.server

 

[n0niL]

AW: HD02 Aktivierung

Muss ich hier auch noch einen User anlegen?

Spoiler

[account]
user = xxx
pwd = xxx
au = skyv14
group = 1


[account]
user = local
pwd =
au = skyv14
group = 1

 

[dodo83]

AW: HD02 Aktivierung

nein
der lokale reicht, aber mir richtigem Label namen

[COLOR=#333333][account][/COLOR]
[COLOR=#333333]user = local[/COLOR]
[COLOR=#333333]pwd =[/COLOR]
[COLOR=#333333]au = cccam[/COLOR]
[COLOR=#333333]group = 1[/COLOR]

 

[Alex]

AW: HD02 Aktivierung

Nein da reicht eigentlich schon der user local
Aber au = cccam wäre korrekt und nicht au = v14

 

[n0niL]

AW: HD02 Aktivierung

Ah OK. Möchte aber den Lokalen behalten.

Kann ich dann einfach einen neuen Anlegen?

[account]
user                          = xxx
pwd                           = xxx
au                            = skyv14 
group                         = 1


[account]
user                          = local
pwd                           =
au                            = skyv14
group                         = 1
 
[account]
user                          = xxx
pwd                           = xxx
au                            = cccam
group                         = 1